1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright 2011-2014 Freescale Semiconductor, Inc. 4 * Copyright 2011 Linaro Ltd. 5 */ 6 7 #include <linux/delay.h> 8 #include <linux/init.h> 9 #include <linux/io.h> 10 #include <linux/irq.h> 11 #include <linux/genalloc.h> 12 #include <linux/mfd/syscon.h> 13 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> 14 #include <linux/of.h> 15 #include <linux/of_address.h> 16 #include <linux/of_platform.h> 17 #include <linux/regmap.h> 18 #include <linux/suspend.h> 19 #include <asm/cacheflush.h> 20 #include <asm/fncpy.h> 21 #include <asm/proc-fns.h> 22 #include <asm/suspend.h> 23 #include <asm/tlb.h> 24 25 #include "common.h" 26 #include "hardware.h" 27 28 #define CCR 0x0 29 #define BM_CCR_WB_COUNT (0x7 << 16) 30 #define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) 31 #define BM_CCR_RBC_EN (0x1 << 27) 32 33 #define CLPCR 0x54 34 #define BP_CLPCR_LPM 0 35 #define BM_CLPCR_LPM (0x3 << 0) 36 #define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) 37 #define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) 38 #define BM_CLPCR_SBYOS (0x1 << 6) 39 #define BM_CLPCR_DIS_REF_OSC (0x1 << 7) 40 #define BM_CLPCR_VSTBY (0x1 << 8) 41 #define BP_CLPCR_STBY_COUNT 9 42 #define BM_CLPCR_STBY_COUNT (0x3 << 9) 43 #define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) 44 #define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) 45 #define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) 46 #define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) 47 #define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) 48 #define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) 49 #define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) 50 #define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) 51 #define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) 52 #define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) 53 #define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) 54 55 #define CGPR 0x64 56 #define BM_CGPR_INT_MEM_CLK_LPM (0x1 << 17) 57 58 #define MX6Q_SUSPEND_OCRAM_SIZE 0x1000 59 #define MX6_MAX_MMDC_IO_NUM 33 60 61 static void __iomem *ccm_base; 62 static void __iomem *suspend_ocram_base; 63 static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase); 64 65 /* 66 * suspend ocram space layout: 67 * ======================== high address ====================== 68 * . 69 * . 70 * . 71 * ^ 72 * ^ 73 * ^ 74 * imx6_suspend code 75 * PM_INFO structure(imx6_cpu_pm_info) 76 * ======================== low address ======================= 77 */ 78 79 struct imx6_pm_base { 80 phys_addr_t pbase; 81 void __iomem *vbase; 82 }; 83 84 struct imx6_pm_socdata { 85 u32 ddr_type; 86 const char *mmdc_compat; 87 const char *src_compat; 88 const char *iomuxc_compat; 89 const char *gpc_compat; 90 const char *pl310_compat; 91 const u32 mmdc_io_num; 92 const u32 *mmdc_io_offset; 93 }; 94 95 static const u32 imx6q_mmdc_io_offset[] __initconst = { 96 0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */ 97 0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */ 98 0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */ 99 0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */ 100 0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */ 101 0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */ 102 0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */ 103 0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */ 104 0x74c, /* GPR_ADDS */ 105 }; 106 107 static const u32 imx6dl_mmdc_io_offset[] __initconst = { 108 0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */ 109 0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */ 110 0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */ 111 0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */ 112 0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */ 113 0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */ 114 0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */ 115 0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */ 116 0x74c, /* GPR_ADDS */ 117 }; 118 119 static const u32 imx6sl_mmdc_io_offset[] __initconst = { 120 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */ 121 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */ 122 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */ 123 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */ 124 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ 125 }; 126 127 static const u32 imx6sll_mmdc_io_offset[] __initconst = { 128 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ 129 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ 130 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ 131 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ 132 }; 133 134 static const u32 imx6sx_mmdc_io_offset[] __initconst = { 135 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */ 136 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */ 137 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */ 138 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */ 139 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */ 140 }; 141 142 static const u32 imx6ul_mmdc_io_offset[] __initconst = { 143 0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */ 144 0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */ 145 0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */ 146 0x494, 0x4b0, /* MODE_CTL, MODE, */ 147 }; 148 149 static const struct imx6_pm_socdata imx6q_pm_data __initconst = { 150 .mmdc_compat = "fsl,imx6q-mmdc", 151 .src_compat = "fsl,imx6q-src", 152 .iomuxc_compat = "fsl,imx6q-iomuxc", 153 .gpc_compat = "fsl,imx6q-gpc", 154 .pl310_compat = "arm,pl310-cache", 155 .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset), 156 .mmdc_io_offset = imx6q_mmdc_io_offset, 157 }; 158 159 static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { 160 .mmdc_compat = "fsl,imx6q-mmdc", 161 .src_compat = "fsl,imx6q-src", 162 .iomuxc_compat = "fsl,imx6dl-iomuxc", 163 .gpc_compat = "fsl,imx6q-gpc", 164 .pl310_compat = "arm,pl310-cache", 165 .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset), 166 .mmdc_io_offset = imx6dl_mmdc_io_offset, 167 }; 168 169 static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { 170 .mmdc_compat = "fsl,imx6sl-mmdc", 171 .src_compat = "fsl,imx6sl-src", 172 .iomuxc_compat = "fsl,imx6sl-iomuxc", 173 .gpc_compat = "fsl,imx6sl-gpc", 174 .pl310_compat = "arm,pl310-cache", 175 .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset), 176 .mmdc_io_offset = imx6sl_mmdc_io_offset, 177 }; 178 179 static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { 180 .mmdc_compat = "fsl,imx6sll-mmdc", 181 .src_compat = "fsl,imx6sll-src", 182 .iomuxc_compat = "fsl,imx6sll-iomuxc", 183 .gpc_compat = "fsl,imx6sll-gpc", 184 .pl310_compat = "arm,pl310-cache", 185 .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), 186 .mmdc_io_offset = imx6sll_mmdc_io_offset, 187 }; 188 189 static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { 190 .mmdc_compat = "fsl,imx6sx-mmdc", 191 .src_compat = "fsl,imx6sx-src", 192 .iomuxc_compat = "fsl,imx6sx-iomuxc", 193 .gpc_compat = "fsl,imx6sx-gpc", 194 .pl310_compat = "arm,pl310-cache", 195 .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset), 196 .mmdc_io_offset = imx6sx_mmdc_io_offset, 197 }; 198 199 static const struct imx6_pm_socdata imx6ul_pm_data __initconst = { 200 .mmdc_compat = "fsl,imx6ul-mmdc", 201 .src_compat = "fsl,imx6ul-src", 202 .iomuxc_compat = "fsl,imx6ul-iomuxc", 203 .gpc_compat = "fsl,imx6ul-gpc", 204 .pl310_compat = NULL, 205 .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset), 206 .mmdc_io_offset = imx6ul_mmdc_io_offset, 207 }; 208 209 /* 210 * This structure is for passing necessary data for low level ocram 211 * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct 212 * definition is changed, the offset definition in 213 * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly, 214 * otherwise, the suspend to ocram function will be broken! 215 */ 216 struct imx6_cpu_pm_info { 217 phys_addr_t pbase; /* The physical address of pm_info. */ 218 phys_addr_t resume_addr; /* The physical resume address for asm code */ 219 u32 ddr_type; 220 u32 pm_info_size; /* Size of pm_info. */ 221 struct imx6_pm_base mmdc_base; 222 struct imx6_pm_base src_base; 223 struct imx6_pm_base iomuxc_base; 224 struct imx6_pm_base ccm_base; 225 struct imx6_pm_base gpc_base; 226 struct imx6_pm_base l2_base; 227 u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */ 228 u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ 229 } __aligned(8); 230 231 void imx6_set_int_mem_clk_lpm(bool enable) 232 { 233 u32 val = readl_relaxed(ccm_base + CGPR); 234 235 val &= ~BM_CGPR_INT_MEM_CLK_LPM; 236 if (enable) 237 val |= BM_CGPR_INT_MEM_CLK_LPM; 238 writel_relaxed(val, ccm_base + CGPR); 239 } 240 241 void imx6_enable_rbc(bool enable) 242 { 243 u32 val; 244 245 /* 246 * need to mask all interrupts in GPC before 247 * operating RBC configurations 248 */ 249 imx_gpc_mask_all(); 250 251 /* configure RBC enable bit */ 252 val = readl_relaxed(ccm_base + CCR); 253 val &= ~BM_CCR_RBC_EN; 254 val |= enable ? BM_CCR_RBC_EN : 0; 255 writel_relaxed(val, ccm_base + CCR); 256 257 /* configure RBC count */ 258 val = readl_relaxed(ccm_base + CCR); 259 val &= ~BM_CCR_RBC_BYPASS_COUNT; 260 val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; 261 writel(val, ccm_base + CCR); 262 263 /* 264 * need to delay at least 2 cycles of CKIL(32K) 265 * due to hardware design requirement, which is 266 * ~61us, here we use 65us for safe 267 */ 268 udelay(65); 269 270 /* restore GPC interrupt mask settings */ 271 imx_gpc_restore_all(); 272 } 273 274 static void imx6q_enable_wb(bool enable) 275 { 276 u32 val; 277 278 /* configure well bias enable bit */ 279 val = readl_relaxed(ccm_base + CLPCR); 280 val &= ~BM_CLPCR_WB_PER_AT_LPM; 281 val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; 282 writel_relaxed(val, ccm_base + CLPCR); 283 284 /* configure well bias count */ 285 val = readl_relaxed(ccm_base + CCR); 286 val &= ~BM_CCR_WB_COUNT; 287 val |= enable ? BM_CCR_WB_COUNT : 0; 288 writel_relaxed(val, ccm_base + CCR); 289 } 290 291 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) 292 { 293 u32 val = readl_relaxed(ccm_base + CLPCR); 294 295 val &= ~BM_CLPCR_LPM; 296 switch (mode) { 297 case WAIT_CLOCKED: 298 break; 299 case WAIT_UNCLOCKED: 300 val |= 0x1 << BP_CLPCR_LPM; 301 val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; 302 break; 303 case STOP_POWER_ON: 304 val |= 0x2 << BP_CLPCR_LPM; 305 val &= ~BM_CLPCR_VSTBY; 306 val &= ~BM_CLPCR_SBYOS; 307 if (cpu_is_imx6sl()) 308 val |= BM_CLPCR_BYPASS_PMIC_READY; 309 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || 310 cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz()) 311 val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; 312 else 313 val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; 314 break; 315 case WAIT_UNCLOCKED_POWER_OFF: 316 val |= 0x1 << BP_CLPCR_LPM; 317 val &= ~BM_CLPCR_VSTBY; 318 val &= ~BM_CLPCR_SBYOS; 319 break; 320 case STOP_POWER_OFF: 321 val |= 0x2 << BP_CLPCR_LPM; 322 val |= 0x3 << BP_CLPCR_STBY_COUNT; 323 val |= BM_CLPCR_VSTBY; 324 val |= BM_CLPCR_SBYOS; 325 if (cpu_is_imx6sl() || cpu_is_imx6sx()) 326 val |= BM_CLPCR_BYPASS_PMIC_READY; 327 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || 328 cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz()) 329 val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; 330 else 331 val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; 332 break; 333 default: 334 return -EINVAL; 335 } 336 337 /* 338 * ERR007265: CCM: When improper low-power sequence is used, 339 * the SoC enters low power mode before the ARM core executes WFI. 340 * 341 * Software workaround: 342 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending 343 * by setting IOMUX_GPR1_GINT. 344 * 2) Software should then unmask IRQ #32 in GPC before setting CCM 345 * Low-Power mode. 346 * 3) Software should mask IRQ #32 right after CCM Low-Power mode 347 * is set (set bits 0-1 of CCM_CLPCR). 348 * 349 * Note that IRQ #32 is GIC SPI #0. 350 */ 351 if (mode != WAIT_CLOCKED) 352 imx_gpc_hwirq_unmask(0); 353 writel_relaxed(val, ccm_base + CLPCR); 354 if (mode != WAIT_CLOCKED) 355 imx_gpc_hwirq_mask(0); 356 357 return 0; 358 } 359 360 static int imx6q_suspend_finish(unsigned long val) 361 { 362 if (!imx6_suspend_in_ocram_fn) { 363 cpu_do_idle(); 364 } else { 365 /* 366 * call low level suspend function in ocram, 367 * as we need to float DDR IO. 368 */ 369 local_flush_tlb_all(); 370 /* check if need to flush internal L2 cache */ 371 if (!((struct imx6_cpu_pm_info *) 372 suspend_ocram_base)->l2_base.vbase) 373 flush_cache_all(); 374 imx6_suspend_in_ocram_fn(suspend_ocram_base); 375 } 376 377 return 0; 378 } 379 380 static int imx6q_pm_enter(suspend_state_t state) 381 { 382 switch (state) { 383 case PM_SUSPEND_STANDBY: 384 imx6_set_lpm(STOP_POWER_ON); 385 imx6_set_int_mem_clk_lpm(true); 386 imx_gpc_pre_suspend(false); 387 if (cpu_is_imx6sl()) 388 imx6sl_set_wait_clk(true); 389 /* Zzz ... */ 390 cpu_do_idle(); 391 if (cpu_is_imx6sl()) 392 imx6sl_set_wait_clk(false); 393 imx_gpc_post_resume(); 394 imx6_set_lpm(WAIT_CLOCKED); 395 break; 396 case PM_SUSPEND_MEM: 397 imx6_set_lpm(STOP_POWER_OFF); 398 imx6_set_int_mem_clk_lpm(false); 399 imx6q_enable_wb(true); 400 /* 401 * For suspend into ocram, asm code already take care of 402 * RBC setting, so we do NOT need to do that here. 403 */ 404 if (!imx6_suspend_in_ocram_fn) 405 imx6_enable_rbc(true); 406 imx_gpc_pre_suspend(true); 407 imx_anatop_pre_suspend(); 408 /* Zzz ... */ 409 cpu_suspend(0, imx6q_suspend_finish); 410 if (cpu_is_imx6q() || cpu_is_imx6dl()) 411 imx_smp_prepare(); 412 imx_anatop_post_resume(); 413 imx_gpc_post_resume(); 414 imx6_enable_rbc(false); 415 imx6q_enable_wb(false); 416 imx6_set_int_mem_clk_lpm(true); 417 imx6_set_lpm(WAIT_CLOCKED); 418 break; 419 default: 420 return -EINVAL; 421 } 422 423 return 0; 424 } 425 426 static int imx6q_pm_valid(suspend_state_t state) 427 { 428 return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM); 429 } 430 431 static const struct platform_suspend_ops imx6q_pm_ops = { 432 .enter = imx6q_pm_enter, 433 .valid = imx6q_pm_valid, 434 }; 435 436 static int __init imx6_pm_get_base(struct imx6_pm_base *base, 437 const char *compat) 438 { 439 struct device_node *node; 440 struct resource res; 441 int ret = 0; 442 443 node = of_find_compatible_node(NULL, NULL, compat); 444 if (!node) 445 return -ENODEV; 446 447 ret = of_address_to_resource(node, 0, &res); 448 if (ret) 449 goto put_node; 450 451 base->pbase = res.start; 452 base->vbase = ioremap(res.start, resource_size(&res)); 453 if (!base->vbase) 454 ret = -ENOMEM; 455 456 put_node: 457 of_node_put(node); 458 return ret; 459 } 460 461 static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) 462 { 463 phys_addr_t ocram_pbase; 464 struct device_node *node; 465 struct platform_device *pdev; 466 struct imx6_cpu_pm_info *pm_info; 467 struct gen_pool *ocram_pool; 468 unsigned long ocram_base; 469 int i, ret = 0; 470 const u32 *mmdc_offset_array; 471 472 suspend_set_ops(&imx6q_pm_ops); 473 474 if (!socdata) { 475 pr_warn("%s: invalid argument!\n", __func__); 476 return -EINVAL; 477 } 478 479 node = of_find_compatible_node(NULL, NULL, "mmio-sram"); 480 if (!node) { 481 pr_warn("%s: failed to find ocram node!\n", __func__); 482 return -ENODEV; 483 } 484 485 pdev = of_find_device_by_node(node); 486 if (!pdev) { 487 pr_warn("%s: failed to find ocram device!\n", __func__); 488 ret = -ENODEV; 489 goto put_node; 490 } 491 492 ocram_pool = gen_pool_get(&pdev->dev, NULL); 493 if (!ocram_pool) { 494 pr_warn("%s: ocram pool unavailable!\n", __func__); 495 ret = -ENODEV; 496 goto put_device; 497 } 498 499 ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE); 500 if (!ocram_base) { 501 pr_warn("%s: unable to alloc ocram!\n", __func__); 502 ret = -ENOMEM; 503 goto put_device; 504 } 505 506 ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); 507 508 suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, 509 MX6Q_SUSPEND_OCRAM_SIZE, false); 510 511 memset(suspend_ocram_base, 0, sizeof(*pm_info)); 512 pm_info = suspend_ocram_base; 513 pm_info->pbase = ocram_pbase; 514 pm_info->resume_addr = __pa_symbol(v7_cpu_resume); 515 pm_info->pm_info_size = sizeof(*pm_info); 516 517 /* 518 * ccm physical address is not used by asm code currently, 519 * so get ccm virtual address directly. 520 */ 521 pm_info->ccm_base.vbase = ccm_base; 522 523 ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat); 524 if (ret) { 525 pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret); 526 goto put_device; 527 } 528 529 ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat); 530 if (ret) { 531 pr_warn("%s: failed to get src base %d!\n", __func__, ret); 532 goto src_map_failed; 533 } 534 535 ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat); 536 if (ret) { 537 pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret); 538 goto iomuxc_map_failed; 539 } 540 541 ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat); 542 if (ret) { 543 pr_warn("%s: failed to get gpc base %d!\n", __func__, ret); 544 goto gpc_map_failed; 545 } 546 547 if (socdata->pl310_compat) { 548 ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat); 549 if (ret) { 550 pr_warn("%s: failed to get pl310-cache base %d!\n", 551 __func__, ret); 552 goto pl310_cache_map_failed; 553 } 554 } 555 556 pm_info->ddr_type = imx_mmdc_get_ddr_type(); 557 pm_info->mmdc_io_num = socdata->mmdc_io_num; 558 mmdc_offset_array = socdata->mmdc_io_offset; 559 560 for (i = 0; i < pm_info->mmdc_io_num; i++) { 561 pm_info->mmdc_io_val[i][0] = 562 mmdc_offset_array[i]; 563 pm_info->mmdc_io_val[i][1] = 564 readl_relaxed(pm_info->iomuxc_base.vbase + 565 mmdc_offset_array[i]); 566 } 567 568 imx6_suspend_in_ocram_fn = fncpy( 569 suspend_ocram_base + sizeof(*pm_info), 570 &imx6_suspend, 571 MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info)); 572 573 goto put_device; 574 575 pl310_cache_map_failed: 576 iounmap(pm_info->gpc_base.vbase); 577 gpc_map_failed: 578 iounmap(pm_info->iomuxc_base.vbase); 579 iomuxc_map_failed: 580 iounmap(pm_info->src_base.vbase); 581 src_map_failed: 582 iounmap(pm_info->mmdc_base.vbase); 583 put_device: 584 put_device(&pdev->dev); 585 put_node: 586 of_node_put(node); 587 588 return ret; 589 } 590 591 static void __init imx6_pm_common_init(const struct imx6_pm_socdata 592 *socdata) 593 { 594 struct regmap *gpr; 595 int ret; 596 597 WARN_ON(!ccm_base); 598 599 if (IS_ENABLED(CONFIG_SUSPEND)) { 600 ret = imx6q_suspend_init(socdata); 601 if (ret) 602 pr_warn("%s: No DDR LPM support with suspend %d!\n", 603 __func__, ret); 604 } 605 606 /* 607 * This is for SW workaround step #1 of ERR007265, see comments 608 * in imx6_set_lpm for details of this errata. 609 * Force IOMUXC irq pending, so that the interrupt to GPC can be 610 * used to deassert dsm_request signal when the signal gets 611 * asserted unexpectedly. 612 */ 613 gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); 614 if (!IS_ERR(gpr)) 615 regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT, 616 IMX6Q_GPR1_GINT); 617 } 618 619 static void imx6_pm_stby_poweroff(void) 620 { 621 imx6_set_lpm(STOP_POWER_OFF); 622 imx6q_suspend_finish(0); 623 624 mdelay(1000); 625 626 pr_emerg("Unable to poweroff system\n"); 627 } 628 629 static int imx6_pm_stby_poweroff_probe(void) 630 { 631 if (pm_power_off) { 632 pr_warn("%s: pm_power_off already claimed %p %ps!\n", 633 __func__, pm_power_off, pm_power_off); 634 return -EBUSY; 635 } 636 637 pm_power_off = imx6_pm_stby_poweroff; 638 return 0; 639 } 640 641 void __init imx6_pm_ccm_init(const char *ccm_compat) 642 { 643 struct device_node *np; 644 u32 val; 645 646 np = of_find_compatible_node(NULL, NULL, ccm_compat); 647 ccm_base = of_iomap(np, 0); 648 BUG_ON(!ccm_base); 649 650 /* 651 * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core 652 * clock being shut down unexpectedly by WAIT mode. 653 */ 654 val = readl_relaxed(ccm_base + CLPCR); 655 val &= ~BM_CLPCR_LPM; 656 writel_relaxed(val, ccm_base + CLPCR); 657 658 if (of_property_read_bool(np, "fsl,pmic-stby-poweroff")) 659 imx6_pm_stby_poweroff_probe(); 660 661 of_node_put(np); 662 } 663 664 void __init imx6q_pm_init(void) 665 { 666 imx6_pm_common_init(&imx6q_pm_data); 667 } 668 669 void __init imx6dl_pm_init(void) 670 { 671 imx6_pm_common_init(&imx6dl_pm_data); 672 } 673 674 void __init imx6sl_pm_init(void) 675 { 676 struct regmap *gpr; 677 678 if (cpu_is_imx6sl()) { 679 imx6_pm_common_init(&imx6sl_pm_data); 680 } else { 681 imx6_pm_common_init(&imx6sll_pm_data); 682 gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); 683 if (!IS_ERR(gpr)) 684 regmap_update_bits(gpr, IOMUXC_GPR5, 685 IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, 0); 686 } 687 } 688 689 void __init imx6sx_pm_init(void) 690 { 691 imx6_pm_common_init(&imx6sx_pm_data); 692 } 693 694 void __init imx6ul_pm_init(void) 695 { 696 imx6_pm_common_init(&imx6ul_pm_data); 697 } 698