1menuconfig ARCH_MXC 2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 3 select ARCH_REQUIRE_GPIOLIB 4 select ARM_CPU_SUSPEND if PM 5 select CLKSRC_MMIO 6 select GENERIC_IRQ_CHIP 7 select PINCTRL 8 select PM_OPP if PM 9 select SOC_BUS 10 select SRAM 11 help 12 Support for Freescale MXC/iMX-based family of processors 13 14if ARCH_MXC 15 16config MXC_TZIC 17 bool 18 19config MXC_AVIC 20 bool 21 22config MXC_DEBUG_BOARD 23 bool "Enable MXC debug board(for 3-stack)" 24 depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS 25 help 26 The debug board is an integral part of the MXC 3-stack(PDK) 27 platforms, it can be attached or removed from the peripheral 28 board. On debug board, several debug devices(ethernet, UART, 29 buttons, LEDs and JTAG) are implemented. Between the MCU and 30 these devices, a CPLD is added as a bridge which performs 31 data/address de-multiplexing and decode, signal level shift, 32 interrupt control and various board functions. 33 34config HAVE_EPIT 35 bool 36 37config MXC_USE_EPIT 38 bool "Use EPIT instead of GPT" 39 depends on HAVE_EPIT 40 help 41 Use EPIT as the system timer on systems that have it. Normally you 42 don't have a reason to do so as the EPIT has the same features and 43 uses the same clocks as the GPT. Anyway, on some systems the GPT 44 may be in use for other purposes. 45 46config ARCH_HAS_RNGA 47 bool 48 49config HAVE_IMX_ANATOP 50 bool 51 52config HAVE_IMX_GPC 53 bool 54 select PM_GENERIC_DOMAINS if PM 55 56config HAVE_IMX_MMDC 57 bool 58 59config HAVE_IMX_SRC 60 def_bool y if SMP 61 select ARCH_HAS_RESET_CONTROLLER 62 63config IMX_HAVE_IOMUX_V1 64 bool 65 66config ARCH_MXC_IOMUX_V3 67 bool 68 69config SOC_IMX1 70 bool 71 select CPU_ARM920T 72 select IMX_HAVE_IOMUX_V1 73 select MXC_AVIC 74 select PINCTRL_IMX1 75 76config SOC_IMX21 77 bool 78 select CPU_ARM926T 79 select IMX_HAVE_IOMUX_V1 80 select MXC_AVIC 81 82config SOC_IMX27 83 bool 84 select CPU_ARM926T 85 select IMX_HAVE_IOMUX_V1 86 select MXC_AVIC 87 select PINCTRL_IMX27 88 89config SOC_IMX31 90 bool 91 select CPU_V6 92 select IMX_HAVE_PLATFORM_MXC_RNGA 93 select MXC_AVIC 94 select SMP_ON_UP if SMP 95 96config SOC_IMX35 97 bool 98 select ARCH_MXC_IOMUX_V3 99 select HAVE_EPIT 100 select MXC_AVIC 101 select PINCTRL_IMX35 102 select SMP_ON_UP if SMP 103 104if ARCH_MULTI_V4T 105 106comment "MX1 platforms:" 107 108config MACH_SCB9328 109 bool "Synertronixx scb9328" 110 select IMX_HAVE_PLATFORM_IMX_UART 111 select SOC_IMX1 112 help 113 Say Y here if you are using a Synertronixx scb9328 board 114 115config MACH_APF9328 116 bool "APF9328" 117 select IMX_HAVE_PLATFORM_IMX_I2C 118 select IMX_HAVE_PLATFORM_IMX_UART 119 select SOC_IMX1 120 help 121 Say Yes here if you are using the Armadeus APF9328 development board 122 123config MACH_IMX1_DT 124 bool "Support i.MX1 platforms from device tree" 125 select SOC_IMX1 126 help 127 Include support for Freescale i.MX1 based platforms 128 using the device tree for discovery. 129 130endif 131 132if ARCH_MULTI_V5 133 134comment "MX21 platforms:" 135 136config MACH_MX21ADS 137 bool "MX21ADS platform" 138 select IMX_HAVE_PLATFORM_IMX_FB 139 select IMX_HAVE_PLATFORM_IMX_UART 140 select IMX_HAVE_PLATFORM_MXC_MMC 141 select IMX_HAVE_PLATFORM_MXC_NAND 142 select SOC_IMX21 143 help 144 Include support for MX21ADS platform. This includes specific 145 configurations for the board and its peripherals. 146 147comment "MX27 platforms:" 148 149config MACH_MX27ADS 150 bool "MX27ADS platform" 151 select IMX_HAVE_PLATFORM_IMX_FB 152 select IMX_HAVE_PLATFORM_IMX_I2C 153 select IMX_HAVE_PLATFORM_IMX_UART 154 select IMX_HAVE_PLATFORM_MXC_MMC 155 select IMX_HAVE_PLATFORM_MXC_NAND 156 select IMX_HAVE_PLATFORM_MXC_W1 157 select SOC_IMX27 158 help 159 Include support for MX27ADS platform. This includes specific 160 configurations for the board and its peripherals. 161 162config MACH_MX27_3DS 163 bool "MX27PDK platform" 164 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 165 select IMX_HAVE_PLATFORM_IMX2_WDT 166 select IMX_HAVE_PLATFORM_IMX_FB 167 select IMX_HAVE_PLATFORM_IMX_I2C 168 select IMX_HAVE_PLATFORM_IMX_KEYPAD 169 select IMX_HAVE_PLATFORM_IMX_SSI 170 select IMX_HAVE_PLATFORM_IMX_UART 171 select IMX_HAVE_PLATFORM_MX2_CAMERA 172 select IMX_HAVE_PLATFORM_MXC_EHCI 173 select IMX_HAVE_PLATFORM_MXC_MMC 174 select IMX_HAVE_PLATFORM_SPI_IMX 175 select MXC_DEBUG_BOARD 176 select USB_ULPI_VIEWPORT if USB_ULPI 177 select SOC_IMX27 178 help 179 Include support for MX27PDK platform. This includes specific 180 configurations for the board and its peripherals. 181 182config MACH_IMX27_VISSTRIM_M10 183 bool "Vista Silicon i.MX27 Visstrim_m10" 184 select IMX_HAVE_PLATFORM_GPIO_KEYS 185 select IMX_HAVE_PLATFORM_IMX_I2C 186 select IMX_HAVE_PLATFORM_IMX_SSI 187 select IMX_HAVE_PLATFORM_IMX_UART 188 select IMX_HAVE_PLATFORM_MX2_CAMERA 189 select IMX_HAVE_PLATFORM_MX2_EMMA 190 select IMX_HAVE_PLATFORM_MXC_EHCI 191 select IMX_HAVE_PLATFORM_MXC_MMC 192 select LEDS_GPIO_REGISTER 193 select SOC_IMX27 194 help 195 Include support for Visstrim_m10 platform and its different variants. 196 This includes specific configurations for the board and its 197 peripherals. 198 199config MACH_PCA100 200 bool "Phytec phyCARD-s (pca100)" 201 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 202 select IMX_HAVE_PLATFORM_IMX2_WDT 203 select IMX_HAVE_PLATFORM_IMX_FB 204 select IMX_HAVE_PLATFORM_IMX_I2C 205 select IMX_HAVE_PLATFORM_IMX_SSI 206 select IMX_HAVE_PLATFORM_IMX_UART 207 select IMX_HAVE_PLATFORM_MXC_EHCI 208 select IMX_HAVE_PLATFORM_MXC_MMC 209 select IMX_HAVE_PLATFORM_MXC_NAND 210 select IMX_HAVE_PLATFORM_MXC_W1 211 select IMX_HAVE_PLATFORM_SPI_IMX 212 select USB_ULPI_VIEWPORT if USB_ULPI 213 select SOC_IMX27 214 help 215 Include support for phyCARD-s (aka pca100) platform. This 216 includes specific configurations for the module and its peripherals. 217 218config MACH_IMX27_DT 219 bool "Support i.MX27 platforms from device tree" 220 select SOC_IMX27 221 help 222 Include support for Freescale i.MX27 based platforms 223 using the device tree for discovery 224 225endif 226 227if ARCH_MULTI_V6 228 229comment "MX31 platforms:" 230 231config MACH_MX31ADS 232 bool "Support MX31ADS platforms" 233 default y 234 select IMX_HAVE_PLATFORM_IMX_I2C 235 select IMX_HAVE_PLATFORM_IMX_SSI 236 select IMX_HAVE_PLATFORM_IMX_UART 237 select SOC_IMX31 238 help 239 Include support for MX31ADS platform. This includes specific 240 configurations for the board and its peripherals. 241 242config MACH_MX31ADS_WM1133_EV1 243 bool "Support Wolfson Microelectronics 1133-EV1 module" 244 depends on MACH_MX31ADS 245 depends on MFD_WM8350_I2C 246 depends on REGULATOR_WM8350 = y 247 help 248 Include support for the Wolfson Microelectronics 1133-EV1 PMU 249 and audio module for the MX31ADS platform. 250 251config MACH_MX31LILLY 252 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 253 select IMX_HAVE_PLATFORM_IMX_UART 254 select IMX_HAVE_PLATFORM_IPU_CORE 255 select IMX_HAVE_PLATFORM_MXC_EHCI 256 select IMX_HAVE_PLATFORM_MXC_MMC 257 select IMX_HAVE_PLATFORM_SPI_IMX 258 select USB_ULPI_VIEWPORT if USB_ULPI 259 select SOC_IMX31 260 help 261 Include support for mx31 based LILLY1131 modules. This includes 262 specific configurations for the board and its peripherals. 263 264config MACH_MX31LITE 265 bool "Support MX31 LITEKIT (LogicPD)" 266 select IMX_HAVE_PLATFORM_IMX2_WDT 267 select IMX_HAVE_PLATFORM_IMX_UART 268 select IMX_HAVE_PLATFORM_MXC_EHCI 269 select IMX_HAVE_PLATFORM_MXC_MMC 270 select IMX_HAVE_PLATFORM_MXC_NAND 271 select IMX_HAVE_PLATFORM_MXC_RTC 272 select IMX_HAVE_PLATFORM_SPI_IMX 273 select LEDS_GPIO_REGISTER 274 select USB_ULPI_VIEWPORT if USB_ULPI 275 select SOC_IMX31 276 help 277 Include support for MX31 LITEKIT platform. This includes specific 278 configurations for the board and its peripherals. 279 280config MACH_PCM037 281 bool "Support Phytec pcm037 (i.MX31) platforms" 282 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 283 select IMX_HAVE_PLATFORM_IMX2_WDT 284 select IMX_HAVE_PLATFORM_IMX_I2C 285 select IMX_HAVE_PLATFORM_IMX_UART 286 select IMX_HAVE_PLATFORM_IPU_CORE 287 select IMX_HAVE_PLATFORM_MXC_EHCI 288 select IMX_HAVE_PLATFORM_MXC_MMC 289 select IMX_HAVE_PLATFORM_MXC_NAND 290 select IMX_HAVE_PLATFORM_MXC_W1 291 select USB_ULPI_VIEWPORT if USB_ULPI 292 select SOC_IMX31 293 help 294 Include support for Phytec pcm037 platform. This includes 295 specific configurations for the board and its peripherals. 296 297config MACH_PCM037_EET 298 bool "Support pcm037 EET board extensions" 299 depends on MACH_PCM037 300 select IMX_HAVE_PLATFORM_GPIO_KEYS 301 select IMX_HAVE_PLATFORM_SPI_IMX 302 help 303 Add support for PCM037 EET baseboard extensions. If you are using the 304 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 305 command-line parameter. 306 307config MACH_MX31_3DS 308 bool "Support MX31PDK (3DS)" 309 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 310 select IMX_HAVE_PLATFORM_IMX2_WDT 311 select IMX_HAVE_PLATFORM_IMX_I2C 312 select IMX_HAVE_PLATFORM_IMX_KEYPAD 313 select IMX_HAVE_PLATFORM_IMX_SSI 314 select IMX_HAVE_PLATFORM_IMX_UART 315 select IMX_HAVE_PLATFORM_IPU_CORE 316 select IMX_HAVE_PLATFORM_MXC_EHCI 317 select IMX_HAVE_PLATFORM_MXC_MMC 318 select IMX_HAVE_PLATFORM_MXC_NAND 319 select IMX_HAVE_PLATFORM_SPI_IMX 320 select MXC_DEBUG_BOARD 321 select USB_ULPI_VIEWPORT if USB_ULPI 322 select SOC_IMX31 323 help 324 Include support for MX31PDK (3DS) platform. This includes specific 325 configurations for the board and its peripherals. 326 327config MACH_MX31_3DS_MXC_NAND_USE_BBT 328 bool "Make the MXC NAND driver use the in flash Bad Block Table" 329 depends on MACH_MX31_3DS 330 depends on MTD_NAND_MXC 331 help 332 Enable this if you want that the MXC NAND driver uses the in flash 333 Bad Block Table to know what blocks are bad instead of scanning the 334 entire flash looking for bad block markers. 335 336config MACH_MX31MOBOARD 337 bool "Support mx31moboard platforms (EPFL Mobots group)" 338 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 339 select IMX_HAVE_PLATFORM_IMX2_WDT 340 select IMX_HAVE_PLATFORM_IMX_I2C 341 select IMX_HAVE_PLATFORM_IMX_SSI 342 select IMX_HAVE_PLATFORM_IMX_UART 343 select IMX_HAVE_PLATFORM_IPU_CORE 344 select IMX_HAVE_PLATFORM_MXC_EHCI 345 select IMX_HAVE_PLATFORM_MXC_MMC 346 select IMX_HAVE_PLATFORM_SPI_IMX 347 select LEDS_GPIO_REGISTER 348 select USB_ULPI_VIEWPORT if USB_ULPI 349 select SOC_IMX31 350 help 351 Include support for mx31moboard platform. This includes specific 352 configurations for the board and its peripherals. 353 354config MACH_QONG 355 bool "Support Dave/DENX QongEVB-LITE platform" 356 select IMX_HAVE_PLATFORM_IMX2_WDT 357 select IMX_HAVE_PLATFORM_IMX_UART 358 select SOC_IMX31 359 help 360 Include support for Dave/DENX QongEVB-LITE platform. This includes 361 specific configurations for the board and its peripherals. 362 363config MACH_ARMADILLO5X0 364 bool "Support Atmark Armadillo-500 Development Base Board" 365 select IMX_HAVE_PLATFORM_GPIO_KEYS 366 select IMX_HAVE_PLATFORM_IMX_I2C 367 select IMX_HAVE_PLATFORM_IMX_UART 368 select IMX_HAVE_PLATFORM_IPU_CORE 369 select IMX_HAVE_PLATFORM_MXC_EHCI 370 select IMX_HAVE_PLATFORM_MXC_MMC 371 select IMX_HAVE_PLATFORM_MXC_NAND 372 select USB_ULPI_VIEWPORT if USB_ULPI 373 select SOC_IMX31 374 help 375 Include support for Atmark Armadillo-500 platform. This includes 376 specific configurations for the board and its peripherals. 377 378config MACH_KZM_ARM11_01 379 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 380 select IMX_HAVE_PLATFORM_IMX_UART 381 select SOC_IMX31 382 help 383 Include support for KZM-ARM11-01. This includes specific 384 configurations for the board and its peripherals. 385 386config MACH_BUG 387 bool "Support Buglabs BUGBase platform" 388 default y 389 select IMX_HAVE_PLATFORM_IMX_UART 390 select SOC_IMX31 391 help 392 Include support for BUGBase 1.3 platform. This includes specific 393 configurations for the board and its peripherals. 394 395config MACH_IMX31_DT 396 bool "Support i.MX31 platforms from device tree" 397 select SOC_IMX31 398 help 399 Include support for Freescale i.MX31 based platforms 400 using the device tree for discovery. 401 402comment "MX35 platforms:" 403 404config MACH_IMX35_DT 405 bool "Support i.MX35 platforms from device tree" 406 select SOC_IMX35 407 help 408 Include support for Freescale i.MX35 based platforms 409 using the device tree for discovery. 410 411config MACH_PCM043 412 bool "Support Phytec pcm043 (i.MX35) platforms" 413 select IMX_HAVE_PLATFORM_FLEXCAN 414 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 415 select IMX_HAVE_PLATFORM_IMX2_WDT 416 select IMX_HAVE_PLATFORM_IMX_I2C 417 select IMX_HAVE_PLATFORM_IMX_SSI 418 select IMX_HAVE_PLATFORM_IMX_UART 419 select IMX_HAVE_PLATFORM_IPU_CORE 420 select IMX_HAVE_PLATFORM_MXC_EHCI 421 select IMX_HAVE_PLATFORM_MXC_NAND 422 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 423 select USB_ULPI_VIEWPORT if USB_ULPI 424 select SOC_IMX35 425 help 426 Include support for Phytec pcm043 platform. This includes 427 specific configurations for the board and its peripherals. 428 429config MACH_MX35_3DS 430 bool "Support MX35PDK platform" 431 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 432 select IMX_HAVE_PLATFORM_IMX2_WDT 433 select IMX_HAVE_PLATFORM_IMX_FB 434 select IMX_HAVE_PLATFORM_IMX_I2C 435 select IMX_HAVE_PLATFORM_IMX_UART 436 select IMX_HAVE_PLATFORM_IPU_CORE 437 select IMX_HAVE_PLATFORM_MXC_EHCI 438 select IMX_HAVE_PLATFORM_MXC_NAND 439 select IMX_HAVE_PLATFORM_MXC_RTC 440 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 441 select MXC_DEBUG_BOARD 442 select SOC_IMX35 443 help 444 Include support for MX35PDK platform. This includes specific 445 configurations for the board and its peripherals. 446 447config MACH_EUKREA_CPUIMX35SD 448 bool "Support Eukrea CPUIMX35 Platform" 449 select IMX_HAVE_PLATFORM_FLEXCAN 450 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 451 select IMX_HAVE_PLATFORM_IMX2_WDT 452 select IMX_HAVE_PLATFORM_IMX_I2C 453 select IMX_HAVE_PLATFORM_IMX_UART 454 select IMX_HAVE_PLATFORM_MXC_EHCI 455 select IMX_HAVE_PLATFORM_MXC_NAND 456 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 457 select USB_ULPI_VIEWPORT if USB_ULPI 458 select SOC_IMX35 459 help 460 Include support for Eukrea CPUIMX35 platform. This includes 461 specific configurations for the board and its peripherals. 462 463choice 464 prompt "Baseboard" 465 depends on MACH_EUKREA_CPUIMX35SD 466 default MACH_EUKREA_MBIMXSD35_BASEBOARD 467 468config MACH_EUKREA_MBIMXSD35_BASEBOARD 469 bool "Eukrea MBIMXSD development board" 470 select IMX_HAVE_PLATFORM_GPIO_KEYS 471 select IMX_HAVE_PLATFORM_IMX_SSI 472 select IMX_HAVE_PLATFORM_IPU_CORE 473 select IMX_HAVE_PLATFORM_SPI_IMX 474 select LEDS_GPIO_REGISTER 475 help 476 This adds board specific devices that can be found on Eukrea's 477 MBIMXSD evaluation board. 478 479endchoice 480 481config MACH_VPR200 482 bool "Support VPR200 platform" 483 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 484 select IMX_HAVE_PLATFORM_GPIO_KEYS 485 select IMX_HAVE_PLATFORM_IMX2_WDT 486 select IMX_HAVE_PLATFORM_IMX_I2C 487 select IMX_HAVE_PLATFORM_IMX_UART 488 select IMX_HAVE_PLATFORM_IPU_CORE 489 select IMX_HAVE_PLATFORM_MXC_EHCI 490 select IMX_HAVE_PLATFORM_MXC_NAND 491 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 492 select SOC_IMX35 493 help 494 Include support for VPR200 platform. This includes specific 495 configurations for the board and its peripherals. 496 497endif 498 499if ARCH_MULTI_V5 500 501comment "Device tree only" 502 503config SOC_IMX25 504 bool "i.MX25 support" 505 select ARCH_MXC_IOMUX_V3 506 select CPU_ARM926T 507 select MXC_AVIC 508 select PINCTRL_IMX25 509 help 510 This enables support for Freescale i.MX25 processor 511endif 512 513if ARCH_MULTI_V7 514 515comment "Device tree only" 516 517config SOC_IMX5 518 bool 519 select HAVE_IMX_SRC 520 select MXC_TZIC 521 522config SOC_IMX50 523 bool "i.MX50 support" 524 select PINCTRL_IMX50 525 select SOC_IMX5 526 527 help 528 This enables support for Freescale i.MX50 processor. 529 530config SOC_IMX51 531 bool "i.MX51 support" 532 select PINCTRL_IMX51 533 select SOC_IMX5 534 help 535 This enables support for Freescale i.MX51 processor 536 537config SOC_IMX53 538 bool "i.MX53 support" 539 select PINCTRL_IMX53 540 select SOC_IMX5 541 542 help 543 This enables support for Freescale i.MX53 processor. 544 545config SOC_IMX6 546 bool 547 select ARM_ERRATA_754322 548 select ARM_ERRATA_775420 549 select ARM_GIC 550 select HAVE_IMX_ANATOP 551 select HAVE_IMX_GPC 552 select HAVE_IMX_MMDC 553 select HAVE_IMX_SRC 554 select MFD_SYSCON 555 select PL310_ERRATA_769419 if CACHE_L2X0 556 557config SOC_IMX6Q 558 bool "i.MX6 Quad/DualLite support" 559 select ARM_ERRATA_764369 if SMP 560 select HAVE_ARM_SCU if SMP 561 select HAVE_ARM_TWD if SMP 562 select PCI_DOMAINS if PCI 563 select PINCTRL_IMX6Q 564 select SOC_IMX6 565 566 help 567 This enables support for Freescale i.MX6 Quad processor. 568 569config SOC_IMX6SL 570 bool "i.MX6 SoloLite support" 571 select PINCTRL_IMX6SL 572 select SOC_IMX6 573 574 help 575 This enables support for Freescale i.MX6 SoloLite processor. 576 577config SOC_IMX6SX 578 bool "i.MX6 SoloX support" 579 select PINCTRL_IMX6SX 580 select SOC_IMX6 581 582 help 583 This enables support for Freescale i.MX6 SoloX processor. 584 585config SOC_VF610 586 bool "Vybrid Family VF610 support" 587 select IRQ_DOMAIN_HIERARCHY 588 select ARM_GIC 589 select PINCTRL_VF610 590 select PL310_ERRATA_769419 if CACHE_L2X0 591 select SMP_ON_UP if SMP 592 593 help 594 This enables support for Freescale Vybrid VF610 processor. 595 596choice 597 prompt "Clocksource for scheduler clock" 598 depends on SOC_VF610 599 default VF_USE_ARM_GLOBAL_TIMER 600 601 config VF_USE_ARM_GLOBAL_TIMER 602 bool "Use ARM Global Timer" 603 select ARM_GLOBAL_TIMER 604 select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK 605 help 606 Use the ARM Global Timer as clocksource 607 608 config VF_USE_PIT_TIMER 609 bool "Use PIT timer" 610 select VF_PIT_TIMER 611 help 612 Use SoC Periodic Interrupt Timer (PIT) as clocksource 613 614endchoice 615 616config SOC_LS1021A 617 bool "Freescale LS1021A support" 618 select ARM_GIC 619 select HAVE_ARM_ARCH_TIMER 620 select PCI_DOMAINS if PCI 621 select ZONE_DMA if ARM_LPAE 622 623 help 624 This enables support for Freescale LS1021A processor. 625 626endif 627 628source "arch/arm/mach-imx/devices/Kconfig" 629 630endif 631