1config ARCH_MXC 2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 3 select ARCH_HAS_CPUFREQ 4 select ARCH_HAS_OPP 5 select ARCH_REQUIRE_GPIOLIB 6 select ARM_CPU_SUSPEND if PM 7 select CLKSRC_MMIO 8 select GENERIC_IRQ_CHIP 9 select PINCTRL 10 select PM_OPP if PM 11 select SOC_BUS 12 select SRAM 13 help 14 Support for Freescale MXC/iMX-based family of processors 15 16menu "Freescale i.MX support" 17 depends on ARCH_MXC 18 19config MXC_TZIC 20 bool 21 22config MXC_AVIC 23 bool 24 25config MXC_DEBUG_BOARD 26 bool "Enable MXC debug board(for 3-stack)" 27 help 28 The debug board is an integral part of the MXC 3-stack(PDK) 29 platforms, it can be attached or removed from the peripheral 30 board. On debug board, several debug devices(ethernet, UART, 31 buttons, LEDs and JTAG) are implemented. Between the MCU and 32 these devices, a CPLD is added as a bridge which performs 33 data/address de-multiplexing and decode, signal level shift, 34 interrupt control and various board functions. 35 36config HAVE_EPIT 37 bool 38 39config MXC_USE_EPIT 40 bool "Use EPIT instead of GPT" 41 depends on HAVE_EPIT 42 help 43 Use EPIT as the system timer on systems that have it. Normally you 44 don't have a reason to do so as the EPIT has the same features and 45 uses the same clocks as the GPT. Anyway, on some systems the GPT 46 may be in use for other purposes. 47 48config ARCH_HAS_RNGA 49 bool 50 51config HAVE_IMX_ANATOP 52 bool 53 54config HAVE_IMX_GPC 55 bool 56 57config HAVE_IMX_MMDC 58 bool 59 60config HAVE_IMX_SRC 61 def_bool y if SMP 62 select ARCH_HAS_RESET_CONTROLLER 63 64config IMX_HAVE_IOMUX_V1 65 bool 66 67config ARCH_MXC_IOMUX_V3 68 bool 69 70config ARCH_MX1 71 bool 72 73config ARCH_MX25 74 bool 75 76config MACH_MX27 77 bool 78 79config SOC_IMX1 80 bool 81 select ARCH_MX1 82 select CPU_ARM920T 83 select IMX_HAVE_IOMUX_V1 84 select MXC_AVIC 85 86config SOC_IMX21 87 bool 88 select CPU_ARM926T 89 select IMX_HAVE_IOMUX_V1 90 select MXC_AVIC 91 92config SOC_IMX25 93 bool 94 select ARCH_MX25 95 select ARCH_MXC_IOMUX_V3 96 select CPU_ARM926T 97 select MXC_AVIC 98 select PINCTRL_IMX25 99 100config SOC_IMX27 101 bool 102 select ARCH_HAS_CPUFREQ 103 select ARCH_HAS_OPP 104 select CPU_ARM926T 105 select IMX_HAVE_IOMUX_V1 106 select MACH_MX27 107 select MXC_AVIC 108 select PINCTRL_IMX27 109 110config SOC_IMX31 111 bool 112 select CPU_V6 113 select IMX_HAVE_PLATFORM_MXC_RNGA 114 select MXC_AVIC 115 select SMP_ON_UP if SMP 116 117config SOC_IMX35 118 bool 119 select ARCH_MXC_IOMUX_V3 120 select HAVE_EPIT 121 select MXC_AVIC 122 select PINCTRL_IMX35 123 select SMP_ON_UP if SMP 124 125config SOC_IMX5 126 bool 127 select ARCH_HAS_CPUFREQ 128 select ARCH_HAS_OPP 129 select ARCH_MXC_IOMUX_V3 130 select MXC_TZIC 131 132config SOC_IMX51 133 bool 134 select HAVE_IMX_SRC 135 select PINCTRL_IMX51 136 select SOC_IMX5 137 138if ARCH_MULTI_V4T 139 140comment "MX1 platforms:" 141config MACH_MXLADS 142 bool 143 144config ARCH_MX1ADS 145 bool "MX1ADS platform" 146 select IMX_HAVE_PLATFORM_IMX_I2C 147 select IMX_HAVE_PLATFORM_IMX_UART 148 select MACH_MXLADS 149 select SOC_IMX1 150 help 151 Say Y here if you are using Motorola MX1ADS/MXLADS boards 152 153config MACH_SCB9328 154 bool "Synertronixx scb9328" 155 select IMX_HAVE_PLATFORM_IMX_UART 156 select SOC_IMX1 157 help 158 Say Y here if you are using a Synertronixx scb9328 board 159 160config MACH_APF9328 161 bool "APF9328" 162 select IMX_HAVE_PLATFORM_IMX_I2C 163 select IMX_HAVE_PLATFORM_IMX_UART 164 select SOC_IMX1 165 help 166 Say Yes here if you are using the Armadeus APF9328 development board 167 168endif 169 170if ARCH_MULTI_V5 171 172comment "MX21 platforms:" 173 174config MACH_MX21ADS 175 bool "MX21ADS platform" 176 select IMX_HAVE_PLATFORM_IMX_FB 177 select IMX_HAVE_PLATFORM_IMX_UART 178 select IMX_HAVE_PLATFORM_MXC_MMC 179 select IMX_HAVE_PLATFORM_MXC_NAND 180 select SOC_IMX21 181 help 182 Include support for MX21ADS platform. This includes specific 183 configurations for the board and its peripherals. 184 185comment "MX25 platforms:" 186 187config MACH_MX25_3DS 188 bool "Support MX25PDK (3DS) Platform" 189 select IMX_HAVE_PLATFORM_FLEXCAN 190 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 191 select IMX_HAVE_PLATFORM_IMX2_WDT 192 select IMX_HAVE_PLATFORM_IMXDI_RTC 193 select IMX_HAVE_PLATFORM_IMX_FB 194 select IMX_HAVE_PLATFORM_IMX_I2C 195 select IMX_HAVE_PLATFORM_IMX_KEYPAD 196 select IMX_HAVE_PLATFORM_IMX_UART 197 select IMX_HAVE_PLATFORM_MXC_EHCI 198 select IMX_HAVE_PLATFORM_MXC_NAND 199 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 200 select SOC_IMX25 201 202config MACH_EUKREA_CPUIMX25SD 203 bool "Support Eukrea CPUIMX25 Platform" 204 select IMX_HAVE_PLATFORM_FLEXCAN 205 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 206 select IMX_HAVE_PLATFORM_IMX2_WDT 207 select IMX_HAVE_PLATFORM_IMXDI_RTC 208 select IMX_HAVE_PLATFORM_IMX_FB 209 select IMX_HAVE_PLATFORM_IMX_I2C 210 select IMX_HAVE_PLATFORM_IMX_UART 211 select IMX_HAVE_PLATFORM_MXC_EHCI 212 select IMX_HAVE_PLATFORM_MXC_NAND 213 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 214 select USB_ULPI_VIEWPORT if USB_ULPI 215 select SOC_IMX25 216 217choice 218 prompt "Baseboard" 219 depends on MACH_EUKREA_CPUIMX25SD 220 default MACH_EUKREA_MBIMXSD25_BASEBOARD 221 222config MACH_EUKREA_MBIMXSD25_BASEBOARD 223 bool "Eukrea MBIMXSD development board" 224 select IMX_HAVE_PLATFORM_GPIO_KEYS 225 select IMX_HAVE_PLATFORM_IMX_SSI 226 select IMX_HAVE_PLATFORM_SPI_IMX 227 select LEDS_GPIO_REGISTER 228 help 229 This adds board specific devices that can be found on Eukrea's 230 MBIMXSD evaluation board. 231 232endchoice 233 234config MACH_IMX25_DT 235 bool "Support i.MX25 platforms from device tree" 236 select SOC_IMX25 237 help 238 Include support for Freescale i.MX25 based platforms 239 using the device tree for discovery 240 241comment "MX27 platforms:" 242 243config MACH_MX27ADS 244 bool "MX27ADS platform" 245 select IMX_HAVE_PLATFORM_IMX_FB 246 select IMX_HAVE_PLATFORM_IMX_I2C 247 select IMX_HAVE_PLATFORM_IMX_UART 248 select IMX_HAVE_PLATFORM_MXC_MMC 249 select IMX_HAVE_PLATFORM_MXC_NAND 250 select IMX_HAVE_PLATFORM_MXC_W1 251 select SOC_IMX27 252 help 253 Include support for MX27ADS platform. This includes specific 254 configurations for the board and its peripherals. 255 256config MACH_PCM038 257 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 258 select IMX_HAVE_PLATFORM_IMX2_WDT 259 select IMX_HAVE_PLATFORM_IMX_I2C 260 select IMX_HAVE_PLATFORM_IMX_UART 261 select IMX_HAVE_PLATFORM_MXC_EHCI 262 select IMX_HAVE_PLATFORM_MXC_NAND 263 select IMX_HAVE_PLATFORM_MXC_W1 264 select IMX_HAVE_PLATFORM_SPI_IMX 265 select USB_ULPI_VIEWPORT if USB_ULPI 266 select SOC_IMX27 267 help 268 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 269 includes specific configurations for the module and its peripherals. 270 271choice 272 prompt "Baseboard" 273 depends on MACH_PCM038 274 default MACH_PCM970_BASEBOARD 275 276config MACH_PCM970_BASEBOARD 277 bool "PHYTEC PCM970 development board" 278 select IMX_HAVE_PLATFORM_IMX_FB 279 select IMX_HAVE_PLATFORM_MXC_MMC 280 help 281 This adds board specific devices that can be found on Phytec's 282 PCM970 evaluation board. 283 284endchoice 285 286config MACH_CPUIMX27 287 bool "Eukrea CPUIMX27 module" 288 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 289 select IMX_HAVE_PLATFORM_IMX2_WDT 290 select IMX_HAVE_PLATFORM_IMX_I2C 291 select IMX_HAVE_PLATFORM_IMX_UART 292 select IMX_HAVE_PLATFORM_MXC_EHCI 293 select IMX_HAVE_PLATFORM_MXC_NAND 294 select IMX_HAVE_PLATFORM_MXC_W1 295 select USB_ULPI_VIEWPORT if USB_ULPI 296 select SOC_IMX27 297 help 298 Include support for Eukrea CPUIMX27 platform. This includes 299 specific configurations for the module and its peripherals. 300 301config MACH_EUKREA_CPUIMX27_USESDHC2 302 bool "CPUIMX27 integrates SDHC2 module" 303 depends on MACH_CPUIMX27 304 select IMX_HAVE_PLATFORM_MXC_MMC 305 help 306 This adds support for the internal SDHC2 used on CPUIMX27 307 for wifi or eMMC. 308 309config MACH_EUKREA_CPUIMX27_USEUART4 310 bool "CPUIMX27 integrates UART4 module" 311 depends on MACH_CPUIMX27 312 help 313 This adds support for the internal UART4 used on CPUIMX27 314 for bluetooth. 315 316choice 317 prompt "Baseboard" 318 depends on MACH_CPUIMX27 319 default MACH_EUKREA_MBIMX27_BASEBOARD 320 321config MACH_EUKREA_MBIMX27_BASEBOARD 322 bool "Eukrea MBIMX27 development board" 323 select IMX_HAVE_PLATFORM_IMX_FB 324 select IMX_HAVE_PLATFORM_IMX_KEYPAD 325 select IMX_HAVE_PLATFORM_IMX_SSI 326 select IMX_HAVE_PLATFORM_IMX_UART 327 select IMX_HAVE_PLATFORM_MXC_MMC 328 select IMX_HAVE_PLATFORM_SPI_IMX 329 select LEDS_GPIO_REGISTER 330 help 331 This adds board specific devices that can be found on Eukrea's 332 MBIMX27 evaluation board. 333 334endchoice 335 336config MACH_MX27_3DS 337 bool "MX27PDK platform" 338 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 339 select IMX_HAVE_PLATFORM_IMX2_WDT 340 select IMX_HAVE_PLATFORM_IMX_FB 341 select IMX_HAVE_PLATFORM_IMX_I2C 342 select IMX_HAVE_PLATFORM_IMX_KEYPAD 343 select IMX_HAVE_PLATFORM_IMX_SSI 344 select IMX_HAVE_PLATFORM_IMX_UART 345 select IMX_HAVE_PLATFORM_MX2_CAMERA 346 select IMX_HAVE_PLATFORM_MXC_EHCI 347 select IMX_HAVE_PLATFORM_MXC_MMC 348 select IMX_HAVE_PLATFORM_SPI_IMX 349 select MXC_DEBUG_BOARD 350 select USB_ULPI_VIEWPORT if USB_ULPI 351 select SOC_IMX27 352 help 353 Include support for MX27PDK platform. This includes specific 354 configurations for the board and its peripherals. 355 356config MACH_IMX27_VISSTRIM_M10 357 bool "Vista Silicon i.MX27 Visstrim_m10" 358 select IMX_HAVE_PLATFORM_GPIO_KEYS 359 select IMX_HAVE_PLATFORM_IMX_I2C 360 select IMX_HAVE_PLATFORM_IMX_SSI 361 select IMX_HAVE_PLATFORM_IMX_UART 362 select IMX_HAVE_PLATFORM_MX2_CAMERA 363 select IMX_HAVE_PLATFORM_MX2_EMMA 364 select IMX_HAVE_PLATFORM_MXC_EHCI 365 select IMX_HAVE_PLATFORM_MXC_MMC 366 select LEDS_GPIO_REGISTER 367 select SOC_IMX27 368 help 369 Include support for Visstrim_m10 platform and its different variants. 370 This includes specific configurations for the board and its 371 peripherals. 372 373config MACH_IMX27LITE 374 bool "LogicPD MX27 LITEKIT platform" 375 select IMX_HAVE_PLATFORM_IMX_SSI 376 select IMX_HAVE_PLATFORM_IMX_UART 377 select SOC_IMX27 378 help 379 Include support for MX27 LITEKIT platform. This includes specific 380 configurations for the board and its peripherals. 381 382config MACH_PCA100 383 bool "Phytec phyCARD-s (pca100)" 384 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 385 select IMX_HAVE_PLATFORM_IMX2_WDT 386 select IMX_HAVE_PLATFORM_IMX_FB 387 select IMX_HAVE_PLATFORM_IMX_I2C 388 select IMX_HAVE_PLATFORM_IMX_SSI 389 select IMX_HAVE_PLATFORM_IMX_UART 390 select IMX_HAVE_PLATFORM_MXC_EHCI 391 select IMX_HAVE_PLATFORM_MXC_MMC 392 select IMX_HAVE_PLATFORM_MXC_NAND 393 select IMX_HAVE_PLATFORM_MXC_W1 394 select IMX_HAVE_PLATFORM_SPI_IMX 395 select USB_ULPI_VIEWPORT if USB_ULPI 396 select SOC_IMX27 397 help 398 Include support for phyCARD-s (aka pca100) platform. This 399 includes specific configurations for the module and its peripherals. 400 401config MACH_MXT_TD60 402 bool "Maxtrack i-MXT TD60" 403 select IMX_HAVE_PLATFORM_IMX_FB 404 select IMX_HAVE_PLATFORM_IMX_I2C 405 select IMX_HAVE_PLATFORM_IMX_UART 406 select IMX_HAVE_PLATFORM_MXC_MMC 407 select IMX_HAVE_PLATFORM_MXC_NAND 408 select SOC_IMX27 409 help 410 Include support for i-MXT (aka td60) platform. This 411 includes specific configurations for the module and its peripherals. 412 413config MACH_IMX27IPCAM 414 bool "IMX27 IPCAM platform" 415 select IMX_HAVE_PLATFORM_IMX2_WDT 416 select IMX_HAVE_PLATFORM_IMX_UART 417 select SOC_IMX27 418 help 419 Include support for IMX27 IPCAM platform. This includes specific 420 configurations for the board and its peripherals. 421 422config MACH_IMX27_DT 423 bool "Support i.MX27 platforms from device tree" 424 select SOC_IMX27 425 help 426 Include support for Freescale i.MX27 based platforms 427 using the device tree for discovery 428 429endif 430 431if ARCH_MULTI_V6 432 433comment "MX31 platforms:" 434 435config MACH_MX31ADS 436 bool "Support MX31ADS platforms" 437 default y 438 select IMX_HAVE_PLATFORM_IMX_I2C 439 select IMX_HAVE_PLATFORM_IMX_SSI 440 select IMX_HAVE_PLATFORM_IMX_UART 441 select SOC_IMX31 442 help 443 Include support for MX31ADS platform. This includes specific 444 configurations for the board and its peripherals. 445 446config MACH_MX31ADS_WM1133_EV1 447 bool "Support Wolfson Microelectronics 1133-EV1 module" 448 depends on MACH_MX31ADS 449 depends on MFD_WM8350_I2C 450 depends on REGULATOR_WM8350 = y 451 help 452 Include support for the Wolfson Microelectronics 1133-EV1 PMU 453 and audio module for the MX31ADS platform. 454 455config MACH_MX31LILLY 456 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 457 select IMX_HAVE_PLATFORM_IMX_UART 458 select IMX_HAVE_PLATFORM_IPU_CORE 459 select IMX_HAVE_PLATFORM_MXC_EHCI 460 select IMX_HAVE_PLATFORM_MXC_MMC 461 select IMX_HAVE_PLATFORM_SPI_IMX 462 select USB_ULPI_VIEWPORT if USB_ULPI 463 select SOC_IMX31 464 help 465 Include support for mx31 based LILLY1131 modules. This includes 466 specific configurations for the board and its peripherals. 467 468config MACH_MX31LITE 469 bool "Support MX31 LITEKIT (LogicPD)" 470 select IMX_HAVE_PLATFORM_IMX2_WDT 471 select IMX_HAVE_PLATFORM_IMX_UART 472 select IMX_HAVE_PLATFORM_MXC_EHCI 473 select IMX_HAVE_PLATFORM_MXC_MMC 474 select IMX_HAVE_PLATFORM_MXC_NAND 475 select IMX_HAVE_PLATFORM_MXC_RTC 476 select IMX_HAVE_PLATFORM_SPI_IMX 477 select LEDS_GPIO_REGISTER 478 select USB_ULPI_VIEWPORT if USB_ULPI 479 select SOC_IMX31 480 help 481 Include support for MX31 LITEKIT platform. This includes specific 482 configurations for the board and its peripherals. 483 484config MACH_PCM037 485 bool "Support Phytec pcm037 (i.MX31) platforms" 486 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 487 select IMX_HAVE_PLATFORM_IMX2_WDT 488 select IMX_HAVE_PLATFORM_IMX_I2C 489 select IMX_HAVE_PLATFORM_IMX_UART 490 select IMX_HAVE_PLATFORM_IPU_CORE 491 select IMX_HAVE_PLATFORM_MXC_EHCI 492 select IMX_HAVE_PLATFORM_MXC_MMC 493 select IMX_HAVE_PLATFORM_MXC_NAND 494 select IMX_HAVE_PLATFORM_MXC_W1 495 select USB_ULPI_VIEWPORT if USB_ULPI 496 select SOC_IMX31 497 help 498 Include support for Phytec pcm037 platform. This includes 499 specific configurations for the board and its peripherals. 500 501config MACH_PCM037_EET 502 bool "Support pcm037 EET board extensions" 503 depends on MACH_PCM037 504 select IMX_HAVE_PLATFORM_GPIO_KEYS 505 select IMX_HAVE_PLATFORM_SPI_IMX 506 help 507 Add support for PCM037 EET baseboard extensions. If you are using the 508 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 509 command-line parameter. 510 511config MACH_MX31_3DS 512 bool "Support MX31PDK (3DS)" 513 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 514 select IMX_HAVE_PLATFORM_IMX2_WDT 515 select IMX_HAVE_PLATFORM_IMX_I2C 516 select IMX_HAVE_PLATFORM_IMX_KEYPAD 517 select IMX_HAVE_PLATFORM_IMX_SSI 518 select IMX_HAVE_PLATFORM_IMX_UART 519 select IMX_HAVE_PLATFORM_IPU_CORE 520 select IMX_HAVE_PLATFORM_MXC_EHCI 521 select IMX_HAVE_PLATFORM_MXC_MMC 522 select IMX_HAVE_PLATFORM_MXC_NAND 523 select IMX_HAVE_PLATFORM_SPI_IMX 524 select MXC_DEBUG_BOARD 525 select USB_ULPI_VIEWPORT if USB_ULPI 526 select SOC_IMX31 527 help 528 Include support for MX31PDK (3DS) platform. This includes specific 529 configurations for the board and its peripherals. 530 531config MACH_MX31_3DS_MXC_NAND_USE_BBT 532 bool "Make the MXC NAND driver use the in flash Bad Block Table" 533 depends on MACH_MX31_3DS 534 depends on MTD_NAND_MXC 535 help 536 Enable this if you want that the MXC NAND driver uses the in flash 537 Bad Block Table to know what blocks are bad instead of scanning the 538 entire flash looking for bad block markers. 539 540config MACH_MX31MOBOARD 541 bool "Support mx31moboard platforms (EPFL Mobots group)" 542 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 543 select IMX_HAVE_PLATFORM_IMX2_WDT 544 select IMX_HAVE_PLATFORM_IMX_I2C 545 select IMX_HAVE_PLATFORM_IMX_SSI 546 select IMX_HAVE_PLATFORM_IMX_UART 547 select IMX_HAVE_PLATFORM_IPU_CORE 548 select IMX_HAVE_PLATFORM_MXC_EHCI 549 select IMX_HAVE_PLATFORM_MXC_MMC 550 select IMX_HAVE_PLATFORM_SPI_IMX 551 select LEDS_GPIO_REGISTER 552 select USB_ULPI_VIEWPORT if USB_ULPI 553 select SOC_IMX31 554 help 555 Include support for mx31moboard platform. This includes specific 556 configurations for the board and its peripherals. 557 558config MACH_QONG 559 bool "Support Dave/DENX QongEVB-LITE platform" 560 select IMX_HAVE_PLATFORM_IMX2_WDT 561 select IMX_HAVE_PLATFORM_IMX_UART 562 select SOC_IMX31 563 help 564 Include support for Dave/DENX QongEVB-LITE platform. This includes 565 specific configurations for the board and its peripherals. 566 567config MACH_ARMADILLO5X0 568 bool "Support Atmark Armadillo-500 Development Base Board" 569 select IMX_HAVE_PLATFORM_GPIO_KEYS 570 select IMX_HAVE_PLATFORM_IMX_I2C 571 select IMX_HAVE_PLATFORM_IMX_UART 572 select IMX_HAVE_PLATFORM_IPU_CORE 573 select IMX_HAVE_PLATFORM_MXC_EHCI 574 select IMX_HAVE_PLATFORM_MXC_MMC 575 select IMX_HAVE_PLATFORM_MXC_NAND 576 select USB_ULPI_VIEWPORT if USB_ULPI 577 select SOC_IMX31 578 help 579 Include support for Atmark Armadillo-500 platform. This includes 580 specific configurations for the board and its peripherals. 581 582config MACH_KZM_ARM11_01 583 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 584 select IMX_HAVE_PLATFORM_IMX_UART 585 select SOC_IMX31 586 help 587 Include support for KZM-ARM11-01. This includes specific 588 configurations for the board and its peripherals. 589 590config MACH_BUG 591 bool "Support Buglabs BUGBase platform" 592 default y 593 select IMX_HAVE_PLATFORM_IMX_UART 594 select SOC_IMX31 595 help 596 Include support for BUGBase 1.3 platform. This includes specific 597 configurations for the board and its peripherals. 598 599config MACH_IMX31_DT 600 bool "Support i.MX31 platforms from device tree" 601 select SOC_IMX31 602 help 603 Include support for Freescale i.MX31 based platforms 604 using the device tree for discovery. 605 606comment "MX35 platforms:" 607 608config MACH_IMX35_DT 609 bool "Support i.MX35 platforms from device tree" 610 select SOC_IMX35 611 help 612 Include support for Freescale i.MX35 based platforms 613 using the device tree for discovery. 614 615config MACH_PCM043 616 bool "Support Phytec pcm043 (i.MX35) platforms" 617 select IMX_HAVE_PLATFORM_FLEXCAN 618 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 619 select IMX_HAVE_PLATFORM_IMX2_WDT 620 select IMX_HAVE_PLATFORM_IMX_I2C 621 select IMX_HAVE_PLATFORM_IMX_SSI 622 select IMX_HAVE_PLATFORM_IMX_UART 623 select IMX_HAVE_PLATFORM_IPU_CORE 624 select IMX_HAVE_PLATFORM_MXC_EHCI 625 select IMX_HAVE_PLATFORM_MXC_NAND 626 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 627 select USB_ULPI_VIEWPORT if USB_ULPI 628 select SOC_IMX35 629 help 630 Include support for Phytec pcm043 platform. This includes 631 specific configurations for the board and its peripherals. 632 633config MACH_MX35_3DS 634 bool "Support MX35PDK platform" 635 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 636 select IMX_HAVE_PLATFORM_IMX2_WDT 637 select IMX_HAVE_PLATFORM_IMX_FB 638 select IMX_HAVE_PLATFORM_IMX_I2C 639 select IMX_HAVE_PLATFORM_IMX_UART 640 select IMX_HAVE_PLATFORM_IPU_CORE 641 select IMX_HAVE_PLATFORM_MXC_EHCI 642 select IMX_HAVE_PLATFORM_MXC_NAND 643 select IMX_HAVE_PLATFORM_MXC_RTC 644 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 645 select MXC_DEBUG_BOARD 646 select SOC_IMX35 647 help 648 Include support for MX35PDK platform. This includes specific 649 configurations for the board and its peripherals. 650 651config MACH_EUKREA_CPUIMX35SD 652 bool "Support Eukrea CPUIMX35 Platform" 653 select IMX_HAVE_PLATFORM_FLEXCAN 654 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 655 select IMX_HAVE_PLATFORM_IMX2_WDT 656 select IMX_HAVE_PLATFORM_IMX_I2C 657 select IMX_HAVE_PLATFORM_IMX_UART 658 select IMX_HAVE_PLATFORM_MXC_EHCI 659 select IMX_HAVE_PLATFORM_MXC_NAND 660 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 661 select USB_ULPI_VIEWPORT if USB_ULPI 662 select SOC_IMX35 663 help 664 Include support for Eukrea CPUIMX35 platform. This includes 665 specific configurations for the board and its peripherals. 666 667choice 668 prompt "Baseboard" 669 depends on MACH_EUKREA_CPUIMX35SD 670 default MACH_EUKREA_MBIMXSD35_BASEBOARD 671 672config MACH_EUKREA_MBIMXSD35_BASEBOARD 673 bool "Eukrea MBIMXSD development board" 674 select IMX_HAVE_PLATFORM_GPIO_KEYS 675 select IMX_HAVE_PLATFORM_IMX_SSI 676 select IMX_HAVE_PLATFORM_IPU_CORE 677 select IMX_HAVE_PLATFORM_SPI_IMX 678 select LEDS_GPIO_REGISTER 679 help 680 This adds board specific devices that can be found on Eukrea's 681 MBIMXSD evaluation board. 682 683endchoice 684 685config MACH_VPR200 686 bool "Support VPR200 platform" 687 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 688 select IMX_HAVE_PLATFORM_GPIO_KEYS 689 select IMX_HAVE_PLATFORM_IMX2_WDT 690 select IMX_HAVE_PLATFORM_IMX_I2C 691 select IMX_HAVE_PLATFORM_IMX_UART 692 select IMX_HAVE_PLATFORM_IPU_CORE 693 select IMX_HAVE_PLATFORM_MXC_EHCI 694 select IMX_HAVE_PLATFORM_MXC_NAND 695 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 696 select SOC_IMX35 697 help 698 Include support for VPR200 platform. This includes specific 699 configurations for the board and its peripherals. 700 701endif 702 703if ARCH_MULTI_V7 704 705comment "i.MX51 machines:" 706 707config MACH_IMX51_DT 708 bool "Support i.MX51 platforms from device tree" 709 select SOC_IMX51 710 help 711 Include support for Freescale i.MX51 based platforms 712 using the device tree for discovery 713 714config MACH_EUKREA_CPUIMX51SD 715 bool "Support Eukrea CPUIMX51SD module" 716 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 717 select IMX_HAVE_PLATFORM_IMX2_WDT 718 select IMX_HAVE_PLATFORM_IMX_I2C 719 select IMX_HAVE_PLATFORM_IMX_UART 720 select IMX_HAVE_PLATFORM_MXC_EHCI 721 select IMX_HAVE_PLATFORM_MXC_NAND 722 select IMX_HAVE_PLATFORM_SPI_IMX 723 select SOC_IMX51 724 help 725 Include support for Eukrea CPUIMX51SD platform. This includes 726 specific configurations for the module and its peripherals. 727 728choice 729 prompt "Baseboard" 730 depends on MACH_EUKREA_CPUIMX51SD 731 default MACH_EUKREA_MBIMXSD51_BASEBOARD 732 733config MACH_EUKREA_MBIMXSD51_BASEBOARD 734 prompt "Eukrea MBIMXSD development board" 735 bool 736 select IMX_HAVE_PLATFORM_IMX_SSI 737 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 738 select LEDS_GPIO_REGISTER 739 help 740 This adds board specific devices that can be found on Eukrea's 741 MBIMXSD evaluation board. 742 743endchoice 744 745comment "Device tree only" 746 747config SOC_IMX50 748 bool "i.MX50 support" 749 select HAVE_IMX_SRC 750 select PINCTRL_IMX50 751 select SOC_IMX5 752 753 help 754 This enables support for Freescale i.MX50 processor. 755 756config SOC_IMX53 757 bool "i.MX53 support" 758 select HAVE_IMX_SRC 759 select PINCTRL_IMX53 760 select SOC_IMX5 761 762 help 763 This enables support for Freescale i.MX53 processor. 764 765config SOC_IMX6 766 bool 767 select ARM_ERRATA_754322 768 select ARM_ERRATA_775420 769 select ARM_GIC 770 select HAVE_IMX_ANATOP 771 select HAVE_IMX_GPC 772 select HAVE_IMX_MMDC 773 select HAVE_IMX_SRC 774 select MFD_SYSCON 775 select PL310_ERRATA_588369 if CACHE_PL310 776 select PL310_ERRATA_727915 if CACHE_PL310 777 select PL310_ERRATA_769419 if CACHE_PL310 778 779config SOC_IMX6Q 780 bool "i.MX6 Quad/DualLite support" 781 select ARM_ERRATA_764369 if SMP 782 select HAVE_ARM_SCU if SMP 783 select HAVE_ARM_TWD if SMP 784 select MIGHT_HAVE_PCI 785 select PCI_DOMAINS if PCI 786 select PINCTRL_IMX6Q 787 select SOC_IMX6 788 789 help 790 This enables support for Freescale i.MX6 Quad processor. 791 792config SOC_IMX6SL 793 bool "i.MX6 SoloLite support" 794 select PINCTRL_IMX6SL 795 select SOC_IMX6 796 797 help 798 This enables support for Freescale i.MX6 SoloLite processor. 799 800config SOC_VF610 801 bool "Vybrid Family VF610 support" 802 select ARM_GIC 803 select PINCTRL_VF610 804 select VF_PIT_TIMER 805 select PL310_ERRATA_588369 if CACHE_PL310 806 select PL310_ERRATA_727915 if CACHE_PL310 807 select PL310_ERRATA_769419 if CACHE_PL310 808 809 help 810 This enable support for Freescale Vybrid VF610 processor. 811 812endif 813 814source "arch/arm/mach-imx/devices/Kconfig" 815 816endmenu 817