1config IMX_HAVE_DMA_V1 2 bool 3# 4# ARCH_MX31 and ARCH_MX35 are left for compatibility 5# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. 6# To easily distinguish good and reviewed from unreviewed usages new (and IMHO 7# more sensible) names are used: SOC_IMX31 and SOC_IMX35 8config ARCH_MX1 9 bool 10 11config MACH_MX21 12 bool 13 14config ARCH_MX25 15 bool 16 17config MACH_MX27 18 bool 19 20config ARCH_MX31 21 bool 22 23config ARCH_MX35 24 bool 25 26config SOC_IMX1 27 bool 28 select ARCH_MX1 29 select CPU_ARM920T 30 select IMX_HAVE_DMA_V1 31 select IMX_HAVE_IOMUX_V1 32 select MXC_AVIC 33 34config SOC_IMX21 35 bool 36 select MACH_MX21 37 select CPU_ARM926T 38 select ARCH_MXC_AUDMUX_V1 39 select IMX_HAVE_DMA_V1 40 select IMX_HAVE_IOMUX_V1 41 select MXC_AVIC 42 43config SOC_IMX25 44 bool 45 select ARCH_MX25 46 select CPU_ARM926T 47 select ARCH_MXC_AUDMUX_V2 48 select ARCH_MXC_IOMUX_V3 49 select MXC_AVIC 50 51config SOC_IMX27 52 bool 53 select MACH_MX27 54 select CPU_ARM926T 55 select ARCH_MXC_AUDMUX_V1 56 select IMX_HAVE_DMA_V1 57 select IMX_HAVE_IOMUX_V1 58 select MXC_AVIC 59 60config SOC_IMX31 61 bool 62 select CPU_V6 63 select IMX_HAVE_PLATFORM_MXC_RNGA 64 select ARCH_MXC_AUDMUX_V2 65 select ARCH_MX31 66 select MXC_AVIC 67 68config SOC_IMX35 69 bool 70 select CPU_V6 71 select ARCH_MXC_IOMUX_V3 72 select ARCH_MXC_AUDMUX_V2 73 select HAVE_EPIT 74 select ARCH_MX35 75 select MXC_AVIC 76 77 78if ARCH_IMX_V4_V5 79 80comment "MX1 platforms:" 81config MACH_MXLADS 82 bool 83 84config ARCH_MX1ADS 85 bool "MX1ADS platform" 86 select MACH_MXLADS 87 select SOC_IMX1 88 select IMX_HAVE_PLATFORM_IMX_I2C 89 select IMX_HAVE_PLATFORM_IMX_UART 90 help 91 Say Y here if you are using Motorola MX1ADS/MXLADS boards 92 93config MACH_SCB9328 94 bool "Synertronixx scb9328" 95 select IMX_HAVE_PLATFORM_IMX_UART 96 help 97 Say Y here if you are using a Synertronixx scb9328 board 98 99config MACH_APF9328 100 bool "APF9328" 101 select SOC_IMX1 102 select IMX_HAVE_PLATFORM_IMX_UART 103 help 104 Say Yes here if you are using the Armadeus APF9328 development board 105 106comment "MX21 platforms:" 107 108config MACH_MX21ADS 109 bool "MX21ADS platform" 110 select SOC_IMX21 111 select IMX_HAVE_PLATFORM_IMX_FB 112 select IMX_HAVE_PLATFORM_IMX_UART 113 select IMX_HAVE_PLATFORM_MXC_MMC 114 select IMX_HAVE_PLATFORM_MXC_NAND 115 help 116 Include support for MX21ADS platform. This includes specific 117 configurations for the board and its peripherals. 118 119comment "MX25 platforms:" 120 121config MACH_MX25_3DS 122 bool "Support MX25PDK (3DS) Platform" 123 select SOC_IMX25 124 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 125 select IMX_HAVE_PLATFORM_IMX2_WDT 126 select IMX_HAVE_PLATFORM_IMXDI_RTC 127 select IMX_HAVE_PLATFORM_IMX_I2C 128 select IMX_HAVE_PLATFORM_IMX_FB 129 select IMX_HAVE_PLATFORM_IMX_KEYPAD 130 select IMX_HAVE_PLATFORM_IMX_UART 131 select IMX_HAVE_PLATFORM_MXC_EHCI 132 select IMX_HAVE_PLATFORM_MXC_NAND 133 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 134 135config MACH_EUKREA_CPUIMX25 136 bool "Support Eukrea CPUIMX25 Platform" 137 select SOC_IMX25 138 select IMX_HAVE_PLATFORM_FLEXCAN 139 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 140 select IMX_HAVE_PLATFORM_IMXDI_RTC 141 select IMX_HAVE_PLATFORM_IMX_FB 142 select IMX_HAVE_PLATFORM_IMX_I2C 143 select IMX_HAVE_PLATFORM_IMX_UART 144 select IMX_HAVE_PLATFORM_MXC_EHCI 145 select IMX_HAVE_PLATFORM_MXC_NAND 146 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 147 select MXC_ULPI if USB_ULPI 148 149choice 150 prompt "Baseboard" 151 depends on MACH_EUKREA_CPUIMX25 152 default MACH_EUKREA_MBIMXSD25_BASEBOARD 153 154config MACH_EUKREA_MBIMXSD25_BASEBOARD 155 bool "Eukrea MBIMXSD development board" 156 select IMX_HAVE_PLATFORM_GPIO_KEYS 157 select IMX_HAVE_PLATFORM_IMX_SSI 158 select LEDS_GPIO_REGISTER 159 help 160 This adds board specific devices that can be found on Eukrea's 161 MBIMXSD evaluation board. 162 163endchoice 164 165comment "MX27 platforms:" 166 167config MACH_MX27ADS 168 bool "MX27ADS platform" 169 select SOC_IMX27 170 select IMX_HAVE_PLATFORM_IMX_FB 171 select IMX_HAVE_PLATFORM_IMX_I2C 172 select IMX_HAVE_PLATFORM_IMX_UART 173 select IMX_HAVE_PLATFORM_MXC_MMC 174 select IMX_HAVE_PLATFORM_MXC_NAND 175 select IMX_HAVE_PLATFORM_MXC_W1 176 help 177 Include support for MX27ADS platform. This includes specific 178 configurations for the board and its peripherals. 179 180config MACH_PCM038 181 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 182 select SOC_IMX27 183 select IMX_HAVE_PLATFORM_IMX2_WDT 184 select IMX_HAVE_PLATFORM_IMX_I2C 185 select IMX_HAVE_PLATFORM_IMX_UART 186 select IMX_HAVE_PLATFORM_MXC_EHCI 187 select IMX_HAVE_PLATFORM_MXC_NAND 188 select IMX_HAVE_PLATFORM_MXC_W1 189 select IMX_HAVE_PLATFORM_SPI_IMX 190 select MXC_ULPI if USB_ULPI 191 help 192 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 193 includes specific configurations for the module and its peripherals. 194 195choice 196 prompt "Baseboard" 197 depends on MACH_PCM038 198 default MACH_PCM970_BASEBOARD 199 200config MACH_PCM970_BASEBOARD 201 bool "PHYTEC PCM970 development board" 202 select IMX_HAVE_PLATFORM_IMX_FB 203 select IMX_HAVE_PLATFORM_MXC_MMC 204 help 205 This adds board specific devices that can be found on Phytec's 206 PCM970 evaluation board. 207 208endchoice 209 210config MACH_CPUIMX27 211 bool "Eukrea CPUIMX27 module" 212 select SOC_IMX27 213 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 214 select IMX_HAVE_PLATFORM_IMX2_WDT 215 select IMX_HAVE_PLATFORM_IMX_I2C 216 select IMX_HAVE_PLATFORM_IMX_UART 217 select IMX_HAVE_PLATFORM_MXC_EHCI 218 select IMX_HAVE_PLATFORM_MXC_NAND 219 select IMX_HAVE_PLATFORM_MXC_W1 220 select MXC_ULPI if USB_ULPI 221 help 222 Include support for Eukrea CPUIMX27 platform. This includes 223 specific configurations for the module and its peripherals. 224 225config MACH_EUKREA_CPUIMX27_USESDHC2 226 bool "CPUIMX27 integrates SDHC2 module" 227 depends on MACH_CPUIMX27 228 select IMX_HAVE_PLATFORM_MXC_MMC 229 help 230 This adds support for the internal SDHC2 used on CPUIMX27 231 for wifi or eMMC. 232 233config MACH_EUKREA_CPUIMX27_USEUART4 234 bool "CPUIMX27 integrates UART4 module" 235 depends on MACH_CPUIMX27 236 help 237 This adds support for the internal UART4 used on CPUIMX27 238 for bluetooth. 239 240choice 241 prompt "Baseboard" 242 depends on MACH_CPUIMX27 243 default MACH_EUKREA_MBIMX27_BASEBOARD 244 245config MACH_EUKREA_MBIMX27_BASEBOARD 246 bool "Eukrea MBIMX27 development board" 247 select IMX_HAVE_PLATFORM_IMX_FB 248 select IMX_HAVE_PLATFORM_IMX_KEYPAD 249 select IMX_HAVE_PLATFORM_IMX_SSI 250 select IMX_HAVE_PLATFORM_IMX_UART 251 select IMX_HAVE_PLATFORM_MXC_MMC 252 select IMX_HAVE_PLATFORM_SPI_IMX 253 select LEDS_GPIO_REGISTER 254 help 255 This adds board specific devices that can be found on Eukrea's 256 MBIMX27 evaluation board. 257 258endchoice 259 260config MACH_MX27_3DS 261 bool "MX27PDK platform" 262 select SOC_IMX27 263 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 264 select IMX_HAVE_PLATFORM_IMX2_WDT 265 select IMX_HAVE_PLATFORM_IMX_FB 266 select IMX_HAVE_PLATFORM_IMX_I2C 267 select IMX_HAVE_PLATFORM_IMX_KEYPAD 268 select IMX_HAVE_PLATFORM_IMX_UART 269 select IMX_HAVE_PLATFORM_MXC_EHCI 270 select IMX_HAVE_PLATFORM_MXC_MMC 271 select IMX_HAVE_PLATFORM_SPI_IMX 272 select MXC_DEBUG_BOARD 273 select MXC_ULPI if USB_ULPI 274 help 275 Include support for MX27PDK platform. This includes specific 276 configurations for the board and its peripherals. 277 278config MACH_IMX27_VISSTRIM_M10 279 bool "Vista Silicon i.MX27 Visstrim_m10" 280 select SOC_IMX27 281 select IMX_HAVE_PLATFORM_GPIO_KEYS 282 select IMX_HAVE_PLATFORM_IMX_I2C 283 select IMX_HAVE_PLATFORM_IMX_SSI 284 select IMX_HAVE_PLATFORM_IMX_UART 285 select IMX_HAVE_PLATFORM_MXC_MMC 286 select IMX_HAVE_PLATFORM_MXC_EHCI 287 help 288 Include support for Visstrim_m10 platform and its different variants. 289 This includes specific configurations for the board and its 290 peripherals. 291 292config MACH_IMX27LITE 293 bool "LogicPD MX27 LITEKIT platform" 294 select SOC_IMX27 295 select IMX_HAVE_PLATFORM_IMX_UART 296 select IMX_HAVE_PLATFORM_IMX_SSI 297 help 298 Include support for MX27 LITEKIT platform. This includes specific 299 configurations for the board and its peripherals. 300 301config MACH_PCA100 302 bool "Phytec phyCARD-s (pca100)" 303 select SOC_IMX27 304 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 305 select IMX_HAVE_PLATFORM_IMX2_WDT 306 select IMX_HAVE_PLATFORM_IMX_FB 307 select IMX_HAVE_PLATFORM_IMX_I2C 308 select IMX_HAVE_PLATFORM_IMX_SSI 309 select IMX_HAVE_PLATFORM_IMX_UART 310 select IMX_HAVE_PLATFORM_MXC_EHCI 311 select IMX_HAVE_PLATFORM_MXC_MMC 312 select IMX_HAVE_PLATFORM_MXC_NAND 313 select IMX_HAVE_PLATFORM_MXC_W1 314 select IMX_HAVE_PLATFORM_SPI_IMX 315 select MXC_ULPI if USB_ULPI 316 help 317 Include support for phyCARD-s (aka pca100) platform. This 318 includes specific configurations for the module and its peripherals. 319 320config MACH_MXT_TD60 321 bool "Maxtrack i-MXT TD60" 322 select SOC_IMX27 323 select IMX_HAVE_PLATFORM_IMX_FB 324 select IMX_HAVE_PLATFORM_IMX_I2C 325 select IMX_HAVE_PLATFORM_IMX_UART 326 select IMX_HAVE_PLATFORM_MXC_MMC 327 select IMX_HAVE_PLATFORM_MXC_NAND 328 help 329 Include support for i-MXT (aka td60) platform. This 330 includes specific configurations for the module and its peripherals. 331 332config MACH_IMX27IPCAM 333 bool "IMX27 IPCAM platform" 334 select SOC_IMX27 335 select IMX_HAVE_PLATFORM_IMX2_WDT 336 select IMX_HAVE_PLATFORM_IMX_UART 337 help 338 Include support for IMX27 IPCAM platform. This includes specific 339 configurations for the board and its peripherals. 340 341endif 342 343if ARCH_MX3 344 345comment "MX31 platforms:" 346 347config MACH_MX31ADS 348 bool "Support MX31ADS platforms" 349 select SOC_IMX31 350 select IMX_HAVE_PLATFORM_IMX_I2C 351 select IMX_HAVE_PLATFORM_IMX_SSI 352 select IMX_HAVE_PLATFORM_IMX_UART 353 default y 354 help 355 Include support for MX31ADS platform. This includes specific 356 configurations for the board and its peripherals. 357 358config MACH_MX31ADS_WM1133_EV1 359 bool "Support Wolfson Microelectronics 1133-EV1 module" 360 depends on MACH_MX31ADS 361 depends on MFD_WM8350_I2C 362 depends on REGULATOR_WM8350 363 select MFD_WM8350_CONFIG_MODE_0 364 select MFD_WM8352_CONFIG_MODE_0 365 help 366 Include support for the Wolfson Microelectronics 1133-EV1 PMU 367 and audio module for the MX31ADS platform. 368 369config MACH_MX31LILLY 370 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 371 select SOC_IMX31 372 select IMX_HAVE_PLATFORM_IMX_UART 373 select IMX_HAVE_PLATFORM_IPU_CORE 374 select IMX_HAVE_PLATFORM_MXC_EHCI 375 select IMX_HAVE_PLATFORM_MXC_MMC 376 select IMX_HAVE_PLATFORM_SPI_IMX 377 select MXC_ULPI if USB_ULPI 378 help 379 Include support for mx31 based LILLY1131 modules. This includes 380 specific configurations for the board and its peripherals. 381 382config MACH_MX31LITE 383 bool "Support MX31 LITEKIT (LogicPD)" 384 select SOC_IMX31 385 select MXC_ULPI if USB_ULPI 386 select IMX_HAVE_PLATFORM_IMX2_WDT 387 select IMX_HAVE_PLATFORM_IMX_UART 388 select IMX_HAVE_PLATFORM_MXC_EHCI 389 select IMX_HAVE_PLATFORM_MXC_MMC 390 select IMX_HAVE_PLATFORM_MXC_NAND 391 select IMX_HAVE_PLATFORM_MXC_RTC 392 select IMX_HAVE_PLATFORM_SPI_IMX 393 select LEDS_GPIO_REGISTER 394 help 395 Include support for MX31 LITEKIT platform. This includes specific 396 configurations for the board and its peripherals. 397 398config MACH_PCM037 399 bool "Support Phytec pcm037 (i.MX31) platforms" 400 select SOC_IMX31 401 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 402 select IMX_HAVE_PLATFORM_IMX2_WDT 403 select IMX_HAVE_PLATFORM_IMX_I2C 404 select IMX_HAVE_PLATFORM_IMX_UART 405 select IMX_HAVE_PLATFORM_IPU_CORE 406 select IMX_HAVE_PLATFORM_MXC_EHCI 407 select IMX_HAVE_PLATFORM_MXC_MMC 408 select IMX_HAVE_PLATFORM_MXC_NAND 409 select IMX_HAVE_PLATFORM_MXC_W1 410 select MXC_ULPI if USB_ULPI 411 help 412 Include support for Phytec pcm037 platform. This includes 413 specific configurations for the board and its peripherals. 414 415config MACH_PCM037_EET 416 bool "Support pcm037 EET board extensions" 417 depends on MACH_PCM037 418 select IMX_HAVE_PLATFORM_GPIO_KEYS 419 select IMX_HAVE_PLATFORM_SPI_IMX 420 help 421 Add support for PCM037 EET baseboard extensions. If you are using the 422 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 423 command-line parameter. 424 425config MACH_MX31_3DS 426 bool "Support MX31PDK (3DS)" 427 select SOC_IMX31 428 select MXC_DEBUG_BOARD 429 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 430 select IMX_HAVE_PLATFORM_IMX2_WDT 431 select IMX_HAVE_PLATFORM_IMX_I2C 432 select IMX_HAVE_PLATFORM_IMX_KEYPAD 433 select IMX_HAVE_PLATFORM_IMX_UART 434 select IMX_HAVE_PLATFORM_IPU_CORE 435 select IMX_HAVE_PLATFORM_MXC_EHCI 436 select IMX_HAVE_PLATFORM_MXC_NAND 437 select IMX_HAVE_PLATFORM_SPI_IMX 438 select MXC_ULPI if USB_ULPI 439 help 440 Include support for MX31PDK (3DS) platform. This includes specific 441 configurations for the board and its peripherals. 442 443config MACH_MX31_3DS_MXC_NAND_USE_BBT 444 bool "Make the MXC NAND driver use the in flash Bad Block Table" 445 depends on MACH_MX31_3DS 446 depends on MTD_NAND_MXC 447 help 448 Enable this if you want that the MXC NAND driver uses the in flash 449 Bad Block Table to know what blocks are bad instead of scanning the 450 entire flash looking for bad block markers. 451 452config MACH_MX31MOBOARD 453 bool "Support mx31moboard platforms (EPFL Mobots group)" 454 select SOC_IMX31 455 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 456 select IMX_HAVE_PLATFORM_IMX_I2C 457 select IMX_HAVE_PLATFORM_IMX_UART 458 select IMX_HAVE_PLATFORM_IPU_CORE 459 select IMX_HAVE_PLATFORM_MXC_EHCI 460 select IMX_HAVE_PLATFORM_MXC_MMC 461 select IMX_HAVE_PLATFORM_SPI_IMX 462 select LEDS_GPIO_REGISTER 463 select MXC_ULPI if USB_ULPI 464 help 465 Include support for mx31moboard platform. This includes specific 466 configurations for the board and its peripherals. 467 468config MACH_QONG 469 bool "Support Dave/DENX QongEVB-LITE platform" 470 select SOC_IMX31 471 select IMX_HAVE_PLATFORM_IMX_UART 472 help 473 Include support for Dave/DENX QongEVB-LITE platform. This includes 474 specific configurations for the board and its peripherals. 475 476config MACH_ARMADILLO5X0 477 bool "Support Atmark Armadillo-500 Development Base Board" 478 select SOC_IMX31 479 select IMX_HAVE_PLATFORM_GPIO_KEYS 480 select IMX_HAVE_PLATFORM_IMX_I2C 481 select IMX_HAVE_PLATFORM_IMX_UART 482 select IMX_HAVE_PLATFORM_IPU_CORE 483 select IMX_HAVE_PLATFORM_MXC_EHCI 484 select IMX_HAVE_PLATFORM_MXC_MMC 485 select IMX_HAVE_PLATFORM_MXC_NAND 486 select MXC_ULPI if USB_ULPI 487 help 488 Include support for Atmark Armadillo-500 platform. This includes 489 specific configurations for the board and its peripherals. 490 491config MACH_KZM_ARM11_01 492 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 493 select SOC_IMX31 494 select IMX_HAVE_PLATFORM_IMX_UART 495 help 496 Include support for KZM-ARM11-01. This includes specific 497 configurations for the board and its peripherals. 498 499config MACH_BUG 500 bool "Support Buglabs BUGBase platform" 501 select SOC_IMX31 502 select IMX_HAVE_PLATFORM_IMX_UART 503 default y 504 help 505 Include support for BUGBase 1.3 platform. This includes specific 506 configurations for the board and its peripherals. 507 508comment "MX35 platforms:" 509 510config MACH_PCM043 511 bool "Support Phytec pcm043 (i.MX35) platforms" 512 select SOC_IMX35 513 select IMX_HAVE_PLATFORM_FLEXCAN 514 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 515 select IMX_HAVE_PLATFORM_IMX2_WDT 516 select IMX_HAVE_PLATFORM_IMX_I2C 517 select IMX_HAVE_PLATFORM_IMX_SSI 518 select IMX_HAVE_PLATFORM_IMX_UART 519 select IMX_HAVE_PLATFORM_IPU_CORE 520 select IMX_HAVE_PLATFORM_MXC_EHCI 521 select IMX_HAVE_PLATFORM_MXC_NAND 522 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 523 select MXC_ULPI if USB_ULPI 524 help 525 Include support for Phytec pcm043 platform. This includes 526 specific configurations for the board and its peripherals. 527 528config MACH_MX35_3DS 529 bool "Support MX35PDK platform" 530 select SOC_IMX35 531 select MXC_DEBUG_BOARD 532 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 533 select IMX_HAVE_PLATFORM_IMX2_WDT 534 select IMX_HAVE_PLATFORM_IMX_I2C 535 select IMX_HAVE_PLATFORM_IMX_UART 536 select IMX_HAVE_PLATFORM_MXC_EHCI 537 select IMX_HAVE_PLATFORM_MXC_NAND 538 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 539 help 540 Include support for MX35PDK platform. This includes specific 541 configurations for the board and its peripherals. 542 543config MACH_EUKREA_CPUIMX35 544 bool "Support Eukrea CPUIMX35 Platform" 545 select SOC_IMX35 546 select IMX_HAVE_PLATFORM_FLEXCAN 547 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 548 select IMX_HAVE_PLATFORM_IMX2_WDT 549 select IMX_HAVE_PLATFORM_IMX_I2C 550 select IMX_HAVE_PLATFORM_IMX_UART 551 select IMX_HAVE_PLATFORM_MXC_EHCI 552 select IMX_HAVE_PLATFORM_MXC_NAND 553 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 554 select MXC_ULPI if USB_ULPI 555 help 556 Include support for Eukrea CPUIMX35 platform. This includes 557 specific configurations for the board and its peripherals. 558 559choice 560 prompt "Baseboard" 561 depends on MACH_EUKREA_CPUIMX35 562 default MACH_EUKREA_MBIMXSD35_BASEBOARD 563 564config MACH_EUKREA_MBIMXSD35_BASEBOARD 565 bool "Eukrea MBIMXSD development board" 566 select IMX_HAVE_PLATFORM_GPIO_KEYS 567 select IMX_HAVE_PLATFORM_IMX_SSI 568 select IMX_HAVE_PLATFORM_IPU_CORE 569 select LEDS_GPIO_REGISTER 570 help 571 This adds board specific devices that can be found on Eukrea's 572 MBIMXSD evaluation board. 573 574endchoice 575 576config MACH_VPR200 577 bool "Support VPR200 platform" 578 select SOC_IMX35 579 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 580 select IMX_HAVE_PLATFORM_GPIO_KEYS 581 select IMX_HAVE_PLATFORM_IMX2_WDT 582 select IMX_HAVE_PLATFORM_IMX_UART 583 select IMX_HAVE_PLATFORM_IMX_I2C 584 select IMX_HAVE_PLATFORM_IPU_CORE 585 select IMX_HAVE_PLATFORM_MXC_EHCI 586 select IMX_HAVE_PLATFORM_MXC_NAND 587 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 588 help 589 Include support for VPR200 platform. This includes specific 590 configurations for the board and its peripherals. 591 592endif 593