1config ARCH_MXC 2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 3 select ARCH_REQUIRE_GPIOLIB 4 select ARM_PATCH_PHYS_VIRT 5 select AUTO_ZRELADDR if !ZBOOT_ROM 6 select CLKDEV_LOOKUP 7 select CLKSRC_MMIO 8 select GENERIC_CLOCKEVENTS 9 select GENERIC_IRQ_CHIP 10 select MULTI_IRQ_HANDLER 11 select SPARSE_IRQ 12 select USE_OF 13 help 14 Support for Freescale MXC/iMX-based family of processors 15 16menu "Freescale i.MX support" 17 depends on ARCH_MXC 18 19config MXC_IRQ_PRIOR 20 bool "Use IRQ priority" 21 help 22 Select this if you want to use prioritized IRQ handling. 23 This feature prevents higher priority ISR to be interrupted 24 by lower priority IRQ even IRQF_DISABLED flag is not set. 25 This may be useful in embedded applications, where are strong 26 requirements for timing. 27 Say N here, unless you have a specialized requirement. 28 29config MXC_TZIC 30 bool 31 32config MXC_AVIC 33 bool 34 35config MXC_DEBUG_BOARD 36 bool "Enable MXC debug board(for 3-stack)" 37 help 38 The debug board is an integral part of the MXC 3-stack(PDK) 39 platforms, it can be attached or removed from the peripheral 40 board. On debug board, several debug devices(ethernet, UART, 41 buttons, LEDs and JTAG) are implemented. Between the MCU and 42 these devices, a CPLD is added as a bridge which performs 43 data/address de-multiplexing and decode, signal level shift, 44 interrupt control and various board functions. 45 46config HAVE_EPIT 47 bool 48 49config MXC_USE_EPIT 50 bool "Use EPIT instead of GPT" 51 depends on HAVE_EPIT 52 help 53 Use EPIT as the system timer on systems that have it. Normally you 54 don't have a reason to do so as the EPIT has the same features and 55 uses the same clocks as the GPT. Anyway, on some systems the GPT 56 may be in use for other purposes. 57 58config MXC_ULPI 59 bool 60 61config ARCH_HAS_RNGA 62 bool 63 64config IRAM_ALLOC 65 bool 66 select GENERIC_ALLOCATOR 67 68config HAVE_IMX_GPC 69 bool 70 71config HAVE_IMX_MMDC 72 bool 73 74config HAVE_IMX_SRC 75 def_bool y if SMP 76 77config IMX_HAVE_IOMUX_V1 78 bool 79 80config ARCH_MXC_IOMUX_V3 81 bool 82 83config ARCH_MX1 84 bool 85 86config MACH_MX21 87 bool 88 89config ARCH_MX25 90 bool 91 92config MACH_MX27 93 bool 94 95config ARCH_MX5 96 bool 97 98config ARCH_MX51 99 bool 100 101config ARCH_MX53 102 bool 103 104config SOC_IMX1 105 bool 106 select ARCH_MX1 107 select COMMON_CLK 108 select CPU_ARM920T 109 select IMX_HAVE_IOMUX_V1 110 select MXC_AVIC 111 112config SOC_IMX21 113 bool 114 select COMMON_CLK 115 select CPU_ARM926T 116 select IMX_HAVE_IOMUX_V1 117 select MACH_MX21 118 select MXC_AVIC 119 120config SOC_IMX25 121 bool 122 select ARCH_MX25 123 select ARCH_MXC_IOMUX_V3 124 select COMMON_CLK 125 select CPU_ARM926T 126 select HAVE_CAN_FLEXCAN if CAN 127 select MXC_AVIC 128 129config SOC_IMX27 130 bool 131 select COMMON_CLK 132 select CPU_ARM926T 133 select IMX_HAVE_IOMUX_V1 134 select MACH_MX27 135 select MXC_AVIC 136 137config SOC_IMX31 138 bool 139 select COMMON_CLK 140 select CPU_V6 141 select IMX_HAVE_PLATFORM_MXC_RNGA 142 select MXC_AVIC 143 select SMP_ON_UP if SMP 144 145config SOC_IMX35 146 bool 147 select ARCH_MXC_IOMUX_V3 148 select COMMON_CLK 149 select CPU_V6K 150 select HAVE_CAN_FLEXCAN if CAN 151 select HAVE_EPIT 152 select MXC_AVIC 153 select SMP_ON_UP if SMP 154 155config SOC_IMX5 156 bool 157 select ARCH_HAS_CPUFREQ 158 select ARCH_MX5 159 select ARCH_MXC_IOMUX_V3 160 select COMMON_CLK 161 select CPU_V7 162 select MXC_TZIC 163 164config SOC_IMX51 165 bool 166 select ARCH_MX5 167 select ARCH_MX51 168 select PINCTRL 169 select PINCTRL_IMX51 170 select SOC_IMX5 171 172if ARCH_MULTI_V4T 173 174comment "MX1 platforms:" 175config MACH_MXLADS 176 bool 177 178config ARCH_MX1ADS 179 bool "MX1ADS platform" 180 select IMX_HAVE_PLATFORM_IMX_I2C 181 select IMX_HAVE_PLATFORM_IMX_UART 182 select MACH_MXLADS 183 select SOC_IMX1 184 help 185 Say Y here if you are using Motorola MX1ADS/MXLADS boards 186 187config MACH_SCB9328 188 bool "Synertronixx scb9328" 189 select IMX_HAVE_PLATFORM_IMX_UART 190 help 191 Say Y here if you are using a Synertronixx scb9328 board 192 193config MACH_APF9328 194 bool "APF9328" 195 select IMX_HAVE_PLATFORM_IMX_I2C 196 select IMX_HAVE_PLATFORM_IMX_UART 197 select SOC_IMX1 198 help 199 Say Yes here if you are using the Armadeus APF9328 development board 200 201endif 202 203if ARCH_MULTI_V5 204 205comment "MX21 platforms:" 206 207config MACH_MX21ADS 208 bool "MX21ADS platform" 209 select IMX_HAVE_PLATFORM_IMX_FB 210 select IMX_HAVE_PLATFORM_IMX_UART 211 select IMX_HAVE_PLATFORM_MXC_MMC 212 select IMX_HAVE_PLATFORM_MXC_NAND 213 select SOC_IMX21 214 help 215 Include support for MX21ADS platform. This includes specific 216 configurations for the board and its peripherals. 217 218comment "MX25 platforms:" 219 220config MACH_MX25_3DS 221 bool "Support MX25PDK (3DS) Platform" 222 select IMX_HAVE_PLATFORM_FLEXCAN 223 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 224 select IMX_HAVE_PLATFORM_IMX2_WDT 225 select IMX_HAVE_PLATFORM_IMXDI_RTC 226 select IMX_HAVE_PLATFORM_IMX_FB 227 select IMX_HAVE_PLATFORM_IMX_I2C 228 select IMX_HAVE_PLATFORM_IMX_KEYPAD 229 select IMX_HAVE_PLATFORM_IMX_UART 230 select IMX_HAVE_PLATFORM_MXC_EHCI 231 select IMX_HAVE_PLATFORM_MXC_NAND 232 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 233 select SOC_IMX25 234 235config MACH_EUKREA_CPUIMX25SD 236 bool "Support Eukrea CPUIMX25 Platform" 237 select IMX_HAVE_PLATFORM_FLEXCAN 238 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 239 select IMX_HAVE_PLATFORM_IMX2_WDT 240 select IMX_HAVE_PLATFORM_IMXDI_RTC 241 select IMX_HAVE_PLATFORM_IMX_FB 242 select IMX_HAVE_PLATFORM_IMX_I2C 243 select IMX_HAVE_PLATFORM_IMX_UART 244 select IMX_HAVE_PLATFORM_MXC_EHCI 245 select IMX_HAVE_PLATFORM_MXC_NAND 246 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 247 select MXC_ULPI if USB_ULPI 248 select SOC_IMX25 249 250choice 251 prompt "Baseboard" 252 depends on MACH_EUKREA_CPUIMX25SD 253 default MACH_EUKREA_MBIMXSD25_BASEBOARD 254 255config MACH_EUKREA_MBIMXSD25_BASEBOARD 256 bool "Eukrea MBIMXSD development board" 257 select IMX_HAVE_PLATFORM_GPIO_KEYS 258 select IMX_HAVE_PLATFORM_IMX_SSI 259 select IMX_HAVE_PLATFORM_SPI_IMX 260 select LEDS_GPIO_REGISTER 261 help 262 This adds board specific devices that can be found on Eukrea's 263 MBIMXSD evaluation board. 264 265endchoice 266 267config MACH_IMX25_DT 268 bool "Support i.MX25 platforms from device tree" 269 select SOC_IMX25 270 help 271 Include support for Freescale i.MX25 based platforms 272 using the device tree for discovery 273 274comment "MX27 platforms:" 275 276config MACH_MX27ADS 277 bool "MX27ADS platform" 278 select IMX_HAVE_PLATFORM_IMX_FB 279 select IMX_HAVE_PLATFORM_IMX_I2C 280 select IMX_HAVE_PLATFORM_IMX_UART 281 select IMX_HAVE_PLATFORM_MXC_MMC 282 select IMX_HAVE_PLATFORM_MXC_NAND 283 select IMX_HAVE_PLATFORM_MXC_W1 284 select SOC_IMX27 285 help 286 Include support for MX27ADS platform. This includes specific 287 configurations for the board and its peripherals. 288 289config MACH_PCM038 290 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 291 select IMX_HAVE_PLATFORM_IMX2_WDT 292 select IMX_HAVE_PLATFORM_IMX_I2C 293 select IMX_HAVE_PLATFORM_IMX_UART 294 select IMX_HAVE_PLATFORM_MXC_EHCI 295 select IMX_HAVE_PLATFORM_MXC_NAND 296 select IMX_HAVE_PLATFORM_MXC_W1 297 select IMX_HAVE_PLATFORM_SPI_IMX 298 select MXC_ULPI if USB_ULPI 299 select SOC_IMX27 300 help 301 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 302 includes specific configurations for the module and its peripherals. 303 304choice 305 prompt "Baseboard" 306 depends on MACH_PCM038 307 default MACH_PCM970_BASEBOARD 308 309config MACH_PCM970_BASEBOARD 310 bool "PHYTEC PCM970 development board" 311 select IMX_HAVE_PLATFORM_IMX_FB 312 select IMX_HAVE_PLATFORM_MXC_MMC 313 help 314 This adds board specific devices that can be found on Phytec's 315 PCM970 evaluation board. 316 317endchoice 318 319config MACH_CPUIMX27 320 bool "Eukrea CPUIMX27 module" 321 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 322 select IMX_HAVE_PLATFORM_IMX2_WDT 323 select IMX_HAVE_PLATFORM_IMX_I2C 324 select IMX_HAVE_PLATFORM_IMX_UART 325 select IMX_HAVE_PLATFORM_MXC_EHCI 326 select IMX_HAVE_PLATFORM_MXC_NAND 327 select IMX_HAVE_PLATFORM_MXC_W1 328 select MXC_ULPI if USB_ULPI 329 select SOC_IMX27 330 help 331 Include support for Eukrea CPUIMX27 platform. This includes 332 specific configurations for the module and its peripherals. 333 334config MACH_EUKREA_CPUIMX27_USESDHC2 335 bool "CPUIMX27 integrates SDHC2 module" 336 depends on MACH_CPUIMX27 337 select IMX_HAVE_PLATFORM_MXC_MMC 338 help 339 This adds support for the internal SDHC2 used on CPUIMX27 340 for wifi or eMMC. 341 342config MACH_EUKREA_CPUIMX27_USEUART4 343 bool "CPUIMX27 integrates UART4 module" 344 depends on MACH_CPUIMX27 345 help 346 This adds support for the internal UART4 used on CPUIMX27 347 for bluetooth. 348 349choice 350 prompt "Baseboard" 351 depends on MACH_CPUIMX27 352 default MACH_EUKREA_MBIMX27_BASEBOARD 353 354config MACH_EUKREA_MBIMX27_BASEBOARD 355 bool "Eukrea MBIMX27 development board" 356 select IMX_HAVE_PLATFORM_IMX_FB 357 select IMX_HAVE_PLATFORM_IMX_KEYPAD 358 select IMX_HAVE_PLATFORM_IMX_SSI 359 select IMX_HAVE_PLATFORM_IMX_UART 360 select IMX_HAVE_PLATFORM_MXC_MMC 361 select IMX_HAVE_PLATFORM_SPI_IMX 362 select LEDS_GPIO_REGISTER 363 help 364 This adds board specific devices that can be found on Eukrea's 365 MBIMX27 evaluation board. 366 367endchoice 368 369config MACH_MX27_3DS 370 bool "MX27PDK platform" 371 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 372 select IMX_HAVE_PLATFORM_IMX2_WDT 373 select IMX_HAVE_PLATFORM_IMX_FB 374 select IMX_HAVE_PLATFORM_IMX_I2C 375 select IMX_HAVE_PLATFORM_IMX_KEYPAD 376 select IMX_HAVE_PLATFORM_IMX_SSI 377 select IMX_HAVE_PLATFORM_IMX_UART 378 select IMX_HAVE_PLATFORM_MX2_CAMERA 379 select IMX_HAVE_PLATFORM_MXC_EHCI 380 select IMX_HAVE_PLATFORM_MXC_MMC 381 select IMX_HAVE_PLATFORM_SPI_IMX 382 select MXC_DEBUG_BOARD 383 select MXC_ULPI if USB_ULPI 384 select SOC_IMX27 385 help 386 Include support for MX27PDK platform. This includes specific 387 configurations for the board and its peripherals. 388 389config MACH_IMX27_VISSTRIM_M10 390 bool "Vista Silicon i.MX27 Visstrim_m10" 391 select IMX_HAVE_PLATFORM_GPIO_KEYS 392 select IMX_HAVE_PLATFORM_IMX_I2C 393 select IMX_HAVE_PLATFORM_IMX_SSI 394 select IMX_HAVE_PLATFORM_IMX_UART 395 select IMX_HAVE_PLATFORM_MX2_CAMERA 396 select IMX_HAVE_PLATFORM_MX2_EMMA 397 select IMX_HAVE_PLATFORM_MXC_EHCI 398 select IMX_HAVE_PLATFORM_MXC_MMC 399 select LEDS_GPIO_REGISTER 400 select SOC_IMX27 401 help 402 Include support for Visstrim_m10 platform and its different variants. 403 This includes specific configurations for the board and its 404 peripherals. 405 406config MACH_IMX27LITE 407 bool "LogicPD MX27 LITEKIT platform" 408 select IMX_HAVE_PLATFORM_IMX_SSI 409 select IMX_HAVE_PLATFORM_IMX_UART 410 select SOC_IMX27 411 help 412 Include support for MX27 LITEKIT platform. This includes specific 413 configurations for the board and its peripherals. 414 415config MACH_PCA100 416 bool "Phytec phyCARD-s (pca100)" 417 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 418 select IMX_HAVE_PLATFORM_IMX2_WDT 419 select IMX_HAVE_PLATFORM_IMX_FB 420 select IMX_HAVE_PLATFORM_IMX_I2C 421 select IMX_HAVE_PLATFORM_IMX_SSI 422 select IMX_HAVE_PLATFORM_IMX_UART 423 select IMX_HAVE_PLATFORM_MXC_EHCI 424 select IMX_HAVE_PLATFORM_MXC_MMC 425 select IMX_HAVE_PLATFORM_MXC_NAND 426 select IMX_HAVE_PLATFORM_MXC_W1 427 select IMX_HAVE_PLATFORM_SPI_IMX 428 select MXC_ULPI if USB_ULPI 429 select SOC_IMX27 430 help 431 Include support for phyCARD-s (aka pca100) platform. This 432 includes specific configurations for the module and its peripherals. 433 434config MACH_MXT_TD60 435 bool "Maxtrack i-MXT TD60" 436 select IMX_HAVE_PLATFORM_IMX_FB 437 select IMX_HAVE_PLATFORM_IMX_I2C 438 select IMX_HAVE_PLATFORM_IMX_UART 439 select IMX_HAVE_PLATFORM_MXC_MMC 440 select IMX_HAVE_PLATFORM_MXC_NAND 441 select SOC_IMX27 442 help 443 Include support for i-MXT (aka td60) platform. This 444 includes specific configurations for the module and its peripherals. 445 446config MACH_IMX27IPCAM 447 bool "IMX27 IPCAM platform" 448 select IMX_HAVE_PLATFORM_IMX2_WDT 449 select IMX_HAVE_PLATFORM_IMX_UART 450 select SOC_IMX27 451 help 452 Include support for IMX27 IPCAM platform. This includes specific 453 configurations for the board and its peripherals. 454 455config MACH_IMX27_DT 456 bool "Support i.MX27 platforms from device tree" 457 select SOC_IMX27 458 help 459 Include support for Freescale i.MX27 based platforms 460 using the device tree for discovery 461 462endif 463 464if ARCH_MULTI_V6 465 466comment "MX31 platforms:" 467 468config MACH_MX31ADS 469 bool "Support MX31ADS platforms" 470 default y 471 select IMX_HAVE_PLATFORM_IMX_I2C 472 select IMX_HAVE_PLATFORM_IMX_SSI 473 select IMX_HAVE_PLATFORM_IMX_UART 474 select SOC_IMX31 475 help 476 Include support for MX31ADS platform. This includes specific 477 configurations for the board and its peripherals. 478 479config MACH_MX31ADS_WM1133_EV1 480 bool "Support Wolfson Microelectronics 1133-EV1 module" 481 depends on MACH_MX31ADS 482 depends on MFD_WM8350_I2C 483 depends on REGULATOR_WM8350 484 select MFD_WM8350_CONFIG_MODE_0 485 select MFD_WM8352_CONFIG_MODE_0 486 help 487 Include support for the Wolfson Microelectronics 1133-EV1 PMU 488 and audio module for the MX31ADS platform. 489 490config MACH_MX31LILLY 491 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 492 select IMX_HAVE_PLATFORM_IMX_UART 493 select IMX_HAVE_PLATFORM_IPU_CORE 494 select IMX_HAVE_PLATFORM_MXC_EHCI 495 select IMX_HAVE_PLATFORM_MXC_MMC 496 select IMX_HAVE_PLATFORM_SPI_IMX 497 select MXC_ULPI if USB_ULPI 498 select SOC_IMX31 499 help 500 Include support for mx31 based LILLY1131 modules. This includes 501 specific configurations for the board and its peripherals. 502 503config MACH_MX31LITE 504 bool "Support MX31 LITEKIT (LogicPD)" 505 select IMX_HAVE_PLATFORM_IMX2_WDT 506 select IMX_HAVE_PLATFORM_IMX_UART 507 select IMX_HAVE_PLATFORM_MXC_EHCI 508 select IMX_HAVE_PLATFORM_MXC_MMC 509 select IMX_HAVE_PLATFORM_MXC_NAND 510 select IMX_HAVE_PLATFORM_MXC_RTC 511 select IMX_HAVE_PLATFORM_SPI_IMX 512 select LEDS_GPIO_REGISTER 513 select MXC_ULPI if USB_ULPI 514 select SOC_IMX31 515 help 516 Include support for MX31 LITEKIT platform. This includes specific 517 configurations for the board and its peripherals. 518 519config MACH_PCM037 520 bool "Support Phytec pcm037 (i.MX31) platforms" 521 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 522 select IMX_HAVE_PLATFORM_IMX2_WDT 523 select IMX_HAVE_PLATFORM_IMX_I2C 524 select IMX_HAVE_PLATFORM_IMX_UART 525 select IMX_HAVE_PLATFORM_IPU_CORE 526 select IMX_HAVE_PLATFORM_MXC_EHCI 527 select IMX_HAVE_PLATFORM_MXC_MMC 528 select IMX_HAVE_PLATFORM_MXC_NAND 529 select IMX_HAVE_PLATFORM_MXC_W1 530 select MXC_ULPI if USB_ULPI 531 select SOC_IMX31 532 help 533 Include support for Phytec pcm037 platform. This includes 534 specific configurations for the board and its peripherals. 535 536config MACH_PCM037_EET 537 bool "Support pcm037 EET board extensions" 538 depends on MACH_PCM037 539 select IMX_HAVE_PLATFORM_GPIO_KEYS 540 select IMX_HAVE_PLATFORM_SPI_IMX 541 help 542 Add support for PCM037 EET baseboard extensions. If you are using the 543 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 544 command-line parameter. 545 546config MACH_MX31_3DS 547 bool "Support MX31PDK (3DS)" 548 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 549 select IMX_HAVE_PLATFORM_IMX2_WDT 550 select IMX_HAVE_PLATFORM_IMX_I2C 551 select IMX_HAVE_PLATFORM_IMX_KEYPAD 552 select IMX_HAVE_PLATFORM_IMX_SSI 553 select IMX_HAVE_PLATFORM_IMX_UART 554 select IMX_HAVE_PLATFORM_IPU_CORE 555 select IMX_HAVE_PLATFORM_MXC_EHCI 556 select IMX_HAVE_PLATFORM_MXC_MMC 557 select IMX_HAVE_PLATFORM_MXC_NAND 558 select IMX_HAVE_PLATFORM_SPI_IMX 559 select MXC_DEBUG_BOARD 560 select MXC_ULPI if USB_ULPI 561 select SOC_IMX31 562 help 563 Include support for MX31PDK (3DS) platform. This includes specific 564 configurations for the board and its peripherals. 565 566config MACH_MX31_3DS_MXC_NAND_USE_BBT 567 bool "Make the MXC NAND driver use the in flash Bad Block Table" 568 depends on MACH_MX31_3DS 569 depends on MTD_NAND_MXC 570 help 571 Enable this if you want that the MXC NAND driver uses the in flash 572 Bad Block Table to know what blocks are bad instead of scanning the 573 entire flash looking for bad block markers. 574 575config MACH_MX31MOBOARD 576 bool "Support mx31moboard platforms (EPFL Mobots group)" 577 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 578 select IMX_HAVE_PLATFORM_IMX2_WDT 579 select IMX_HAVE_PLATFORM_IMX_I2C 580 select IMX_HAVE_PLATFORM_IMX_SSI 581 select IMX_HAVE_PLATFORM_IMX_UART 582 select IMX_HAVE_PLATFORM_IPU_CORE 583 select IMX_HAVE_PLATFORM_MXC_EHCI 584 select IMX_HAVE_PLATFORM_MXC_MMC 585 select IMX_HAVE_PLATFORM_SPI_IMX 586 select LEDS_GPIO_REGISTER 587 select MXC_ULPI if USB_ULPI 588 select SOC_IMX31 589 help 590 Include support for mx31moboard platform. This includes specific 591 configurations for the board and its peripherals. 592 593config MACH_QONG 594 bool "Support Dave/DENX QongEVB-LITE platform" 595 select IMX_HAVE_PLATFORM_IMX2_WDT 596 select IMX_HAVE_PLATFORM_IMX_UART 597 select SOC_IMX31 598 help 599 Include support for Dave/DENX QongEVB-LITE platform. This includes 600 specific configurations for the board and its peripherals. 601 602config MACH_ARMADILLO5X0 603 bool "Support Atmark Armadillo-500 Development Base Board" 604 select IMX_HAVE_PLATFORM_GPIO_KEYS 605 select IMX_HAVE_PLATFORM_IMX_I2C 606 select IMX_HAVE_PLATFORM_IMX_UART 607 select IMX_HAVE_PLATFORM_IPU_CORE 608 select IMX_HAVE_PLATFORM_MXC_EHCI 609 select IMX_HAVE_PLATFORM_MXC_MMC 610 select IMX_HAVE_PLATFORM_MXC_NAND 611 select MXC_ULPI if USB_ULPI 612 select SOC_IMX31 613 help 614 Include support for Atmark Armadillo-500 platform. This includes 615 specific configurations for the board and its peripherals. 616 617config MACH_KZM_ARM11_01 618 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 619 select IMX_HAVE_PLATFORM_IMX_UART 620 select SOC_IMX31 621 help 622 Include support for KZM-ARM11-01. This includes specific 623 configurations for the board and its peripherals. 624 625config MACH_BUG 626 bool "Support Buglabs BUGBase platform" 627 default y 628 select IMX_HAVE_PLATFORM_IMX_UART 629 select SOC_IMX31 630 help 631 Include support for BUGBase 1.3 platform. This includes specific 632 configurations for the board and its peripherals. 633 634config MACH_IMX31_DT 635 bool "Support i.MX31 platforms from device tree" 636 select SOC_IMX31 637 help 638 Include support for Freescale i.MX31 based platforms 639 using the device tree for discovery. 640 641comment "MX35 platforms:" 642 643config MACH_PCM043 644 bool "Support Phytec pcm043 (i.MX35) platforms" 645 select IMX_HAVE_PLATFORM_FLEXCAN 646 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 647 select IMX_HAVE_PLATFORM_IMX2_WDT 648 select IMX_HAVE_PLATFORM_IMX_I2C 649 select IMX_HAVE_PLATFORM_IMX_SSI 650 select IMX_HAVE_PLATFORM_IMX_UART 651 select IMX_HAVE_PLATFORM_IPU_CORE 652 select IMX_HAVE_PLATFORM_MXC_EHCI 653 select IMX_HAVE_PLATFORM_MXC_NAND 654 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 655 select MXC_ULPI if USB_ULPI 656 select SOC_IMX35 657 help 658 Include support for Phytec pcm043 platform. This includes 659 specific configurations for the board and its peripherals. 660 661config MACH_MX35_3DS 662 bool "Support MX35PDK platform" 663 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 664 select IMX_HAVE_PLATFORM_IMX2_WDT 665 select IMX_HAVE_PLATFORM_IMX_FB 666 select IMX_HAVE_PLATFORM_IMX_I2C 667 select IMX_HAVE_PLATFORM_IMX_UART 668 select IMX_HAVE_PLATFORM_IPU_CORE 669 select IMX_HAVE_PLATFORM_MXC_EHCI 670 select IMX_HAVE_PLATFORM_MXC_NAND 671 select IMX_HAVE_PLATFORM_MXC_RTC 672 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 673 select MXC_DEBUG_BOARD 674 select SOC_IMX35 675 help 676 Include support for MX35PDK platform. This includes specific 677 configurations for the board and its peripherals. 678 679config MACH_EUKREA_CPUIMX35SD 680 bool "Support Eukrea CPUIMX35 Platform" 681 select IMX_HAVE_PLATFORM_FLEXCAN 682 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 683 select IMX_HAVE_PLATFORM_IMX2_WDT 684 select IMX_HAVE_PLATFORM_IMX_I2C 685 select IMX_HAVE_PLATFORM_IMX_UART 686 select IMX_HAVE_PLATFORM_MXC_EHCI 687 select IMX_HAVE_PLATFORM_MXC_NAND 688 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 689 select MXC_ULPI if USB_ULPI 690 select SOC_IMX35 691 help 692 Include support for Eukrea CPUIMX35 platform. This includes 693 specific configurations for the board and its peripherals. 694 695choice 696 prompt "Baseboard" 697 depends on MACH_EUKREA_CPUIMX35SD 698 default MACH_EUKREA_MBIMXSD35_BASEBOARD 699 700config MACH_EUKREA_MBIMXSD35_BASEBOARD 701 bool "Eukrea MBIMXSD development board" 702 select IMX_HAVE_PLATFORM_GPIO_KEYS 703 select IMX_HAVE_PLATFORM_IMX_SSI 704 select IMX_HAVE_PLATFORM_IPU_CORE 705 select IMX_HAVE_PLATFORM_SPI_IMX 706 select LEDS_GPIO_REGISTER 707 help 708 This adds board specific devices that can be found on Eukrea's 709 MBIMXSD evaluation board. 710 711endchoice 712 713config MACH_VPR200 714 bool "Support VPR200 platform" 715 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 716 select IMX_HAVE_PLATFORM_GPIO_KEYS 717 select IMX_HAVE_PLATFORM_IMX2_WDT 718 select IMX_HAVE_PLATFORM_IMX_I2C 719 select IMX_HAVE_PLATFORM_IMX_UART 720 select IMX_HAVE_PLATFORM_IPU_CORE 721 select IMX_HAVE_PLATFORM_MXC_EHCI 722 select IMX_HAVE_PLATFORM_MXC_NAND 723 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 724 select SOC_IMX35 725 help 726 Include support for VPR200 platform. This includes specific 727 configurations for the board and its peripherals. 728 729endif 730 731if ARCH_MULTI_V7 732 733comment "i.MX51 machines:" 734 735config MACH_IMX51_DT 736 bool "Support i.MX51 platforms from device tree" 737 select SOC_IMX51 738 help 739 Include support for Freescale i.MX51 based platforms 740 using the device tree for discovery 741 742config MACH_MX51_BABBAGE 743 bool "Support MX51 BABBAGE platforms" 744 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 745 select IMX_HAVE_PLATFORM_IMX2_WDT 746 select IMX_HAVE_PLATFORM_IMX_I2C 747 select IMX_HAVE_PLATFORM_IMX_UART 748 select IMX_HAVE_PLATFORM_MXC_EHCI 749 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 750 select IMX_HAVE_PLATFORM_SPI_IMX 751 select SOC_IMX51 752 help 753 Include support for MX51 Babbage platform, also known as MX51EVK in 754 u-boot. This includes specific configurations for the board and its 755 peripherals. 756 757config MACH_EUKREA_CPUIMX51SD 758 bool "Support Eukrea CPUIMX51SD module" 759 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 760 select IMX_HAVE_PLATFORM_IMX2_WDT 761 select IMX_HAVE_PLATFORM_IMX_I2C 762 select IMX_HAVE_PLATFORM_IMX_UART 763 select IMX_HAVE_PLATFORM_MXC_EHCI 764 select IMX_HAVE_PLATFORM_MXC_NAND 765 select IMX_HAVE_PLATFORM_SPI_IMX 766 select SOC_IMX51 767 help 768 Include support for Eukrea CPUIMX51SD platform. This includes 769 specific configurations for the module and its peripherals. 770 771choice 772 prompt "Baseboard" 773 depends on MACH_EUKREA_CPUIMX51SD 774 default MACH_EUKREA_MBIMXSD51_BASEBOARD 775 776config MACH_EUKREA_MBIMXSD51_BASEBOARD 777 prompt "Eukrea MBIMXSD development board" 778 bool 779 select IMX_HAVE_PLATFORM_IMX_SSI 780 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 781 select LEDS_GPIO_REGISTER 782 help 783 This adds board specific devices that can be found on Eukrea's 784 MBIMXSD evaluation board. 785 786endchoice 787 788comment "Device tree only" 789 790config SOC_IMX53 791 bool "i.MX53 support" 792 select ARCH_MX5 793 select ARCH_MX53 794 select HAVE_CAN_FLEXCAN if CAN 795 select IMX_HAVE_PLATFORM_IMX2_WDT 796 select PINCTRL 797 select PINCTRL_IMX53 798 select SOC_IMX5 799 800 help 801 This enables support for Freescale i.MX53 processor. 802 803config SOC_IMX6Q 804 bool "i.MX6 Quad support" 805 select ARCH_HAS_CPUFREQ 806 select ARCH_HAS_OPP 807 select ARM_CPU_SUSPEND if PM 808 select ARM_ERRATA_743622 809 select ARM_ERRATA_751472 810 select ARM_ERRATA_754322 811 select ARM_ERRATA_764369 if SMP 812 select ARM_ERRATA_775420 813 select ARM_GIC 814 select COMMON_CLK 815 select CPU_V7 816 select HAVE_ARM_SCU 817 select HAVE_CAN_FLEXCAN if CAN 818 select HAVE_IMX_GPC 819 select HAVE_IMX_MMDC 820 select HAVE_SMP 821 select MFD_SYSCON 822 select PINCTRL 823 select PINCTRL_IMX6Q 824 select PL310_ERRATA_588369 if CACHE_PL310 825 select PL310_ERRATA_727915 if CACHE_PL310 826 select PL310_ERRATA_769419 if CACHE_PL310 827 select PM_OPP if PM 828 829 help 830 This enables support for Freescale i.MX6 Quad processor. 831 832endif 833 834source "arch/arm/mach-imx/devices/Kconfig" 835 836endmenu 837