1config IMX_HAVE_DMA_V1 2 bool 3# 4# ARCH_MX31 and ARCH_MX35 are left for compatibility 5# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. 6# To easily distinguish good and reviewed from unreviewed usages new (and IMHO 7# more sensible) names are used: SOC_IMX31 and SOC_IMX35 8config ARCH_MX31 9 bool 10 11config ARCH_MX35 12 bool 13 14config SOC_IMX1 15 bool 16 select CPU_ARM920T 17 select IMX_HAVE_DMA_V1 18 select IMX_HAVE_IOMUX_V1 19 select MXC_AVIC 20 21config SOC_IMX21 22 bool 23 select CPU_ARM926T 24 select ARCH_MXC_AUDMUX_V1 25 select IMX_HAVE_DMA_V1 26 select IMX_HAVE_IOMUX_V1 27 select MXC_AVIC 28 29config SOC_IMX25 30 bool 31 select CPU_ARM926T 32 select ARCH_MXC_AUDMUX_V2 33 select ARCH_MXC_IOMUX_V3 34 select MXC_AVIC 35 36config SOC_IMX27 37 bool 38 select CPU_ARM926T 39 select ARCH_MXC_AUDMUX_V1 40 select IMX_HAVE_DMA_V1 41 select IMX_HAVE_IOMUX_V1 42 select MXC_AVIC 43 44config SOC_IMX31 45 bool 46 select CPU_V6 47 select IMX_HAVE_PLATFORM_MXC_RNGA 48 select ARCH_MXC_AUDMUX_V2 49 select ARCH_MX31 50 select MXC_AVIC 51 52config SOC_IMX35 53 bool 54 select CPU_V6 55 select ARCH_MXC_IOMUX_V3 56 select ARCH_MXC_AUDMUX_V2 57 select HAVE_EPIT 58 select ARCH_MX35 59 select MXC_AVIC 60 61 62if ARCH_MX1 63 64comment "MX1 platforms:" 65config MACH_MXLADS 66 bool 67 68config ARCH_MX1ADS 69 bool "MX1ADS platform" 70 select MACH_MXLADS 71 select SOC_IMX1 72 select IMX_HAVE_PLATFORM_IMX_I2C 73 select IMX_HAVE_PLATFORM_IMX_UART 74 help 75 Say Y here if you are using Motorola MX1ADS/MXLADS boards 76 77config MACH_SCB9328 78 bool "Synertronixx scb9328" 79 select IMX_HAVE_PLATFORM_IMX_UART 80 help 81 Say Y here if you are using a Synertronixx scb9328 board 82 83config MACH_APF9328 84 bool "APF9328" 85 select SOC_IMX1 86 select IMX_HAVE_PLATFORM_IMX_UART 87 help 88 Say Yes here if you are using the Armadeus APF9328 development board 89 90endif 91 92if ARCH_MX2 93 94choice 95 prompt "CPUs:" 96 default MACH_MX21 97 98config MACH_MX21 99 bool "i.MX21 support" 100 help 101 This enables support for Freescale's MX2 based i.MX21 processor. 102 103config MACH_MX27 104 bool "i.MX27 support" 105 help 106 This enables support for Freescale's MX2 based i.MX27 processor. 107 108endchoice 109 110endif 111 112if MACH_MX21 113 114comment "MX21 platforms:" 115 116config MACH_MX21ADS 117 bool "MX21ADS platform" 118 select SOC_IMX21 119 select IMX_HAVE_PLATFORM_IMX_FB 120 select IMX_HAVE_PLATFORM_IMX_UART 121 select IMX_HAVE_PLATFORM_MXC_MMC 122 select IMX_HAVE_PLATFORM_MXC_NAND 123 help 124 Include support for MX21ADS platform. This includes specific 125 configurations for the board and its peripherals. 126 127endif 128 129if ARCH_MX25 130 131comment "MX25 platforms:" 132 133config MACH_MX25_3DS 134 bool "Support MX25PDK (3DS) Platform" 135 select SOC_IMX25 136 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 137 select IMX_HAVE_PLATFORM_IMX2_WDT 138 select IMX_HAVE_PLATFORM_IMXDI_RTC 139 select IMX_HAVE_PLATFORM_IMX_I2C 140 select IMX_HAVE_PLATFORM_IMX_FB 141 select IMX_HAVE_PLATFORM_IMX_KEYPAD 142 select IMX_HAVE_PLATFORM_IMX_UART 143 select IMX_HAVE_PLATFORM_MXC_EHCI 144 select IMX_HAVE_PLATFORM_MXC_NAND 145 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 146 147config MACH_EUKREA_CPUIMX25 148 bool "Support Eukrea CPUIMX25 Platform" 149 select SOC_IMX25 150 select IMX_HAVE_PLATFORM_FLEXCAN 151 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 152 select IMX_HAVE_PLATFORM_IMXDI_RTC 153 select IMX_HAVE_PLATFORM_IMX_FB 154 select IMX_HAVE_PLATFORM_IMX_I2C 155 select IMX_HAVE_PLATFORM_IMX_UART 156 select IMX_HAVE_PLATFORM_MXC_EHCI 157 select IMX_HAVE_PLATFORM_MXC_NAND 158 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 159 select MXC_ULPI if USB_ULPI 160 161choice 162 prompt "Baseboard" 163 depends on MACH_EUKREA_CPUIMX25 164 default MACH_EUKREA_MBIMXSD25_BASEBOARD 165 166config MACH_EUKREA_MBIMXSD25_BASEBOARD 167 bool "Eukrea MBIMXSD development board" 168 select IMX_HAVE_PLATFORM_GPIO_KEYS 169 select IMX_HAVE_PLATFORM_IMX_SSI 170 select LEDS_GPIO_REGISTER 171 help 172 This adds board specific devices that can be found on Eukrea's 173 MBIMXSD evaluation board. 174 175endchoice 176 177endif 178 179if MACH_MX27 180 181comment "MX27 platforms:" 182 183config MACH_MX27ADS 184 bool "MX27ADS platform" 185 select SOC_IMX27 186 select IMX_HAVE_PLATFORM_IMX_FB 187 select IMX_HAVE_PLATFORM_IMX_I2C 188 select IMX_HAVE_PLATFORM_IMX_UART 189 select IMX_HAVE_PLATFORM_MXC_MMC 190 select IMX_HAVE_PLATFORM_MXC_NAND 191 select IMX_HAVE_PLATFORM_MXC_W1 192 help 193 Include support for MX27ADS platform. This includes specific 194 configurations for the board and its peripherals. 195 196config MACH_PCM038 197 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 198 select SOC_IMX27 199 select IMX_HAVE_PLATFORM_IMX2_WDT 200 select IMX_HAVE_PLATFORM_IMX_I2C 201 select IMX_HAVE_PLATFORM_IMX_UART 202 select IMX_HAVE_PLATFORM_MXC_EHCI 203 select IMX_HAVE_PLATFORM_MXC_NAND 204 select IMX_HAVE_PLATFORM_MXC_W1 205 select IMX_HAVE_PLATFORM_SPI_IMX 206 select MXC_ULPI if USB_ULPI 207 help 208 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 209 includes specific configurations for the module and its peripherals. 210 211choice 212 prompt "Baseboard" 213 depends on MACH_PCM038 214 default MACH_PCM970_BASEBOARD 215 216config MACH_PCM970_BASEBOARD 217 bool "PHYTEC PCM970 development board" 218 select IMX_HAVE_PLATFORM_IMX_FB 219 select IMX_HAVE_PLATFORM_MXC_MMC 220 help 221 This adds board specific devices that can be found on Phytec's 222 PCM970 evaluation board. 223 224endchoice 225 226config MACH_CPUIMX27 227 bool "Eukrea CPUIMX27 module" 228 select SOC_IMX27 229 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 230 select IMX_HAVE_PLATFORM_IMX2_WDT 231 select IMX_HAVE_PLATFORM_IMX_I2C 232 select IMX_HAVE_PLATFORM_IMX_UART 233 select IMX_HAVE_PLATFORM_MXC_EHCI 234 select IMX_HAVE_PLATFORM_MXC_NAND 235 select IMX_HAVE_PLATFORM_MXC_W1 236 select MXC_ULPI if USB_ULPI 237 help 238 Include support for Eukrea CPUIMX27 platform. This includes 239 specific configurations for the module and its peripherals. 240 241config MACH_EUKREA_CPUIMX27_USESDHC2 242 bool "CPUIMX27 integrates SDHC2 module" 243 depends on MACH_CPUIMX27 244 select IMX_HAVE_PLATFORM_MXC_MMC 245 help 246 This adds support for the internal SDHC2 used on CPUIMX27 247 for wifi or eMMC. 248 249config MACH_EUKREA_CPUIMX27_USEUART4 250 bool "CPUIMX27 integrates UART4 module" 251 depends on MACH_CPUIMX27 252 help 253 This adds support for the internal UART4 used on CPUIMX27 254 for bluetooth. 255 256choice 257 prompt "Baseboard" 258 depends on MACH_CPUIMX27 259 default MACH_EUKREA_MBIMX27_BASEBOARD 260 261config MACH_EUKREA_MBIMX27_BASEBOARD 262 bool "Eukrea MBIMX27 development board" 263 select IMX_HAVE_PLATFORM_IMX_FB 264 select IMX_HAVE_PLATFORM_IMX_KEYPAD 265 select IMX_HAVE_PLATFORM_IMX_SSI 266 select IMX_HAVE_PLATFORM_IMX_UART 267 select IMX_HAVE_PLATFORM_MXC_MMC 268 select IMX_HAVE_PLATFORM_SPI_IMX 269 select LEDS_GPIO_REGISTER 270 help 271 This adds board specific devices that can be found on Eukrea's 272 MBIMX27 evaluation board. 273 274endchoice 275 276config MACH_MX27_3DS 277 bool "MX27PDK platform" 278 select SOC_IMX27 279 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 280 select IMX_HAVE_PLATFORM_IMX2_WDT 281 select IMX_HAVE_PLATFORM_IMX_I2C 282 select IMX_HAVE_PLATFORM_IMX_KEYPAD 283 select IMX_HAVE_PLATFORM_IMX_UART 284 select IMX_HAVE_PLATFORM_MXC_EHCI 285 select IMX_HAVE_PLATFORM_MXC_MMC 286 select IMX_HAVE_PLATFORM_SPI_IMX 287 select MXC_DEBUG_BOARD 288 select MXC_ULPI if USB_ULPI 289 help 290 Include support for MX27PDK platform. This includes specific 291 configurations for the board and its peripherals. 292 293config MACH_IMX27_VISSTRIM_M10 294 bool "Vista Silicon i.MX27 Visstrim_m10" 295 select SOC_IMX27 296 select IMX_HAVE_PLATFORM_GPIO_KEYS 297 select IMX_HAVE_PLATFORM_IMX_I2C 298 select IMX_HAVE_PLATFORM_IMX_SSI 299 select IMX_HAVE_PLATFORM_IMX_UART 300 select IMX_HAVE_PLATFORM_MXC_MMC 301 select IMX_HAVE_PLATFORM_MXC_EHCI 302 help 303 Include support for Visstrim_m10 platform and its different variants. 304 This includes specific configurations for the board and its 305 peripherals. 306 307config MACH_IMX27LITE 308 bool "LogicPD MX27 LITEKIT platform" 309 select SOC_IMX27 310 select IMX_HAVE_PLATFORM_IMX_UART 311 select IMX_HAVE_PLATFORM_IMX_SSI 312 help 313 Include support for MX27 LITEKIT platform. This includes specific 314 configurations for the board and its peripherals. 315 316config MACH_PCA100 317 bool "Phytec phyCARD-s (pca100)" 318 select SOC_IMX27 319 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 320 select IMX_HAVE_PLATFORM_IMX2_WDT 321 select IMX_HAVE_PLATFORM_IMX_FB 322 select IMX_HAVE_PLATFORM_IMX_I2C 323 select IMX_HAVE_PLATFORM_IMX_SSI 324 select IMX_HAVE_PLATFORM_IMX_UART 325 select IMX_HAVE_PLATFORM_MXC_EHCI 326 select IMX_HAVE_PLATFORM_MXC_MMC 327 select IMX_HAVE_PLATFORM_MXC_NAND 328 select IMX_HAVE_PLATFORM_MXC_W1 329 select IMX_HAVE_PLATFORM_SPI_IMX 330 select MXC_ULPI if USB_ULPI 331 help 332 Include support for phyCARD-s (aka pca100) platform. This 333 includes specific configurations for the module and its peripherals. 334 335config MACH_MXT_TD60 336 bool "Maxtrack i-MXT TD60" 337 select SOC_IMX27 338 select IMX_HAVE_PLATFORM_IMX_FB 339 select IMX_HAVE_PLATFORM_IMX_I2C 340 select IMX_HAVE_PLATFORM_IMX_UART 341 select IMX_HAVE_PLATFORM_MXC_MMC 342 select IMX_HAVE_PLATFORM_MXC_NAND 343 help 344 Include support for i-MXT (aka td60) platform. This 345 includes specific configurations for the module and its peripherals. 346 347config MACH_IMX27IPCAM 348 bool "IMX27 IPCAM platform" 349 select SOC_IMX27 350 select IMX_HAVE_PLATFORM_IMX2_WDT 351 select IMX_HAVE_PLATFORM_IMX_UART 352 help 353 Include support for IMX27 IPCAM platform. This includes specific 354 configurations for the board and its peripherals. 355 356endif 357 358if ARCH_MX3 359 360comment "MX31 platforms:" 361 362config MACH_MX31ADS 363 bool "Support MX31ADS platforms" 364 select SOC_IMX31 365 select IMX_HAVE_PLATFORM_IMX_I2C 366 select IMX_HAVE_PLATFORM_IMX_SSI 367 select IMX_HAVE_PLATFORM_IMX_UART 368 default y 369 help 370 Include support for MX31ADS platform. This includes specific 371 configurations for the board and its peripherals. 372 373config MACH_MX31ADS_WM1133_EV1 374 bool "Support Wolfson Microelectronics 1133-EV1 module" 375 depends on MACH_MX31ADS 376 depends on MFD_WM8350_I2C 377 depends on REGULATOR_WM8350 378 select MFD_WM8350_CONFIG_MODE_0 379 select MFD_WM8352_CONFIG_MODE_0 380 help 381 Include support for the Wolfson Microelectronics 1133-EV1 PMU 382 and audio module for the MX31ADS platform. 383 384config MACH_MX31LILLY 385 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 386 select SOC_IMX31 387 select IMX_HAVE_PLATFORM_IMX_UART 388 select IMX_HAVE_PLATFORM_IPU_CORE 389 select IMX_HAVE_PLATFORM_MXC_EHCI 390 select IMX_HAVE_PLATFORM_MXC_MMC 391 select IMX_HAVE_PLATFORM_SPI_IMX 392 select MXC_ULPI if USB_ULPI 393 help 394 Include support for mx31 based LILLY1131 modules. This includes 395 specific configurations for the board and its peripherals. 396 397config MACH_MX31LITE 398 bool "Support MX31 LITEKIT (LogicPD)" 399 select SOC_IMX31 400 select MXC_ULPI if USB_ULPI 401 select IMX_HAVE_PLATFORM_IMX2_WDT 402 select IMX_HAVE_PLATFORM_IMX_UART 403 select IMX_HAVE_PLATFORM_MXC_EHCI 404 select IMX_HAVE_PLATFORM_MXC_MMC 405 select IMX_HAVE_PLATFORM_MXC_NAND 406 select IMX_HAVE_PLATFORM_MXC_RTC 407 select IMX_HAVE_PLATFORM_SPI_IMX 408 select LEDS_GPIO_REGISTER 409 help 410 Include support for MX31 LITEKIT platform. This includes specific 411 configurations for the board and its peripherals. 412 413config MACH_PCM037 414 bool "Support Phytec pcm037 (i.MX31) platforms" 415 select SOC_IMX31 416 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 417 select IMX_HAVE_PLATFORM_IMX2_WDT 418 select IMX_HAVE_PLATFORM_IMX_I2C 419 select IMX_HAVE_PLATFORM_IMX_UART 420 select IMX_HAVE_PLATFORM_IPU_CORE 421 select IMX_HAVE_PLATFORM_MXC_EHCI 422 select IMX_HAVE_PLATFORM_MXC_MMC 423 select IMX_HAVE_PLATFORM_MXC_NAND 424 select IMX_HAVE_PLATFORM_MXC_W1 425 select MXC_ULPI if USB_ULPI 426 help 427 Include support for Phytec pcm037 platform. This includes 428 specific configurations for the board and its peripherals. 429 430config MACH_PCM037_EET 431 bool "Support pcm037 EET board extensions" 432 depends on MACH_PCM037 433 select IMX_HAVE_PLATFORM_GPIO_KEYS 434 select IMX_HAVE_PLATFORM_SPI_IMX 435 help 436 Add support for PCM037 EET baseboard extensions. If you are using the 437 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 438 command-line parameter. 439 440config MACH_MX31_3DS 441 bool "Support MX31PDK (3DS)" 442 select SOC_IMX31 443 select MXC_DEBUG_BOARD 444 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 445 select IMX_HAVE_PLATFORM_IMX2_WDT 446 select IMX_HAVE_PLATFORM_IMX_I2C 447 select IMX_HAVE_PLATFORM_IMX_KEYPAD 448 select IMX_HAVE_PLATFORM_IMX_UART 449 select IMX_HAVE_PLATFORM_IPU_CORE 450 select IMX_HAVE_PLATFORM_MXC_EHCI 451 select IMX_HAVE_PLATFORM_MXC_NAND 452 select IMX_HAVE_PLATFORM_SPI_IMX 453 select MXC_ULPI if USB_ULPI 454 help 455 Include support for MX31PDK (3DS) platform. This includes specific 456 configurations for the board and its peripherals. 457 458config MACH_MX31_3DS_MXC_NAND_USE_BBT 459 bool "Make the MXC NAND driver use the in flash Bad Block Table" 460 depends on MACH_MX31_3DS 461 depends on MTD_NAND_MXC 462 help 463 Enable this if you want that the MXC NAND driver uses the in flash 464 Bad Block Table to know what blocks are bad instead of scanning the 465 entire flash looking for bad block markers. 466 467config MACH_MX31MOBOARD 468 bool "Support mx31moboard platforms (EPFL Mobots group)" 469 select SOC_IMX31 470 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 471 select IMX_HAVE_PLATFORM_IMX_I2C 472 select IMX_HAVE_PLATFORM_IMX_UART 473 select IMX_HAVE_PLATFORM_IPU_CORE 474 select IMX_HAVE_PLATFORM_MXC_EHCI 475 select IMX_HAVE_PLATFORM_MXC_MMC 476 select IMX_HAVE_PLATFORM_SPI_IMX 477 select LEDS_GPIO_REGISTER 478 select MXC_ULPI if USB_ULPI 479 help 480 Include support for mx31moboard platform. This includes specific 481 configurations for the board and its peripherals. 482 483config MACH_QONG 484 bool "Support Dave/DENX QongEVB-LITE platform" 485 select SOC_IMX31 486 select IMX_HAVE_PLATFORM_IMX_UART 487 help 488 Include support for Dave/DENX QongEVB-LITE platform. This includes 489 specific configurations for the board and its peripherals. 490 491config MACH_ARMADILLO5X0 492 bool "Support Atmark Armadillo-500 Development Base Board" 493 select SOC_IMX31 494 select IMX_HAVE_PLATFORM_GPIO_KEYS 495 select IMX_HAVE_PLATFORM_IMX_I2C 496 select IMX_HAVE_PLATFORM_IMX_UART 497 select IMX_HAVE_PLATFORM_IPU_CORE 498 select IMX_HAVE_PLATFORM_MXC_EHCI 499 select IMX_HAVE_PLATFORM_MXC_MMC 500 select IMX_HAVE_PLATFORM_MXC_NAND 501 select MXC_ULPI if USB_ULPI 502 help 503 Include support for Atmark Armadillo-500 platform. This includes 504 specific configurations for the board and its peripherals. 505 506config MACH_KZM_ARM11_01 507 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 508 select SOC_IMX31 509 select IMX_HAVE_PLATFORM_IMX_UART 510 help 511 Include support for KZM-ARM11-01. This includes specific 512 configurations for the board and its peripherals. 513 514config MACH_BUG 515 bool "Support Buglabs BUGBase platform" 516 select SOC_IMX31 517 select IMX_HAVE_PLATFORM_IMX_UART 518 default y 519 help 520 Include support for BUGBase 1.3 platform. This includes specific 521 configurations for the board and its peripherals. 522 523comment "MX35 platforms:" 524 525config MACH_PCM043 526 bool "Support Phytec pcm043 (i.MX35) platforms" 527 select SOC_IMX35 528 select IMX_HAVE_PLATFORM_FLEXCAN 529 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 530 select IMX_HAVE_PLATFORM_IMX2_WDT 531 select IMX_HAVE_PLATFORM_IMX_I2C 532 select IMX_HAVE_PLATFORM_IMX_SSI 533 select IMX_HAVE_PLATFORM_IMX_UART 534 select IMX_HAVE_PLATFORM_IPU_CORE 535 select IMX_HAVE_PLATFORM_MXC_EHCI 536 select IMX_HAVE_PLATFORM_MXC_NAND 537 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 538 select MXC_ULPI if USB_ULPI 539 help 540 Include support for Phytec pcm043 platform. This includes 541 specific configurations for the board and its peripherals. 542 543config MACH_MX35_3DS 544 bool "Support MX35PDK platform" 545 select SOC_IMX35 546 select MXC_DEBUG_BOARD 547 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 548 select IMX_HAVE_PLATFORM_IMX2_WDT 549 select IMX_HAVE_PLATFORM_IMX_I2C 550 select IMX_HAVE_PLATFORM_IMX_UART 551 select IMX_HAVE_PLATFORM_MXC_EHCI 552 select IMX_HAVE_PLATFORM_MXC_NAND 553 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 554 help 555 Include support for MX35PDK platform. This includes specific 556 configurations for the board and its peripherals. 557 558config MACH_EUKREA_CPUIMX35 559 bool "Support Eukrea CPUIMX35 Platform" 560 select SOC_IMX35 561 select IMX_HAVE_PLATFORM_FLEXCAN 562 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 563 select IMX_HAVE_PLATFORM_IMX2_WDT 564 select IMX_HAVE_PLATFORM_IMX_I2C 565 select IMX_HAVE_PLATFORM_IMX_UART 566 select IMX_HAVE_PLATFORM_MXC_EHCI 567 select IMX_HAVE_PLATFORM_MXC_NAND 568 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 569 select MXC_ULPI if USB_ULPI 570 help 571 Include support for Eukrea CPUIMX35 platform. This includes 572 specific configurations for the board and its peripherals. 573 574choice 575 prompt "Baseboard" 576 depends on MACH_EUKREA_CPUIMX35 577 default MACH_EUKREA_MBIMXSD35_BASEBOARD 578 579config MACH_EUKREA_MBIMXSD35_BASEBOARD 580 bool "Eukrea MBIMXSD development board" 581 select IMX_HAVE_PLATFORM_GPIO_KEYS 582 select IMX_HAVE_PLATFORM_IMX_SSI 583 select IMX_HAVE_PLATFORM_IPU_CORE 584 select LEDS_GPIO_REGISTER 585 help 586 This adds board specific devices that can be found on Eukrea's 587 MBIMXSD evaluation board. 588 589endchoice 590 591config MACH_VPR200 592 bool "Support VPR200 platform" 593 select SOC_IMX35 594 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 595 select IMX_HAVE_PLATFORM_GPIO_KEYS 596 select IMX_HAVE_PLATFORM_IMX2_WDT 597 select IMX_HAVE_PLATFORM_IMX_UART 598 select IMX_HAVE_PLATFORM_IMX_I2C 599 select IMX_HAVE_PLATFORM_IPU_CORE 600 select IMX_HAVE_PLATFORM_MXC_EHCI 601 select IMX_HAVE_PLATFORM_MXC_NAND 602 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 603 help 604 Include support for VPR200 platform. This includes specific 605 configurations for the board and its peripherals. 606 607endif 608