1config ARCH_MXC 2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 3 select ARCH_REQUIRE_GPIOLIB 4 select ARM_CPU_SUSPEND if PM 5 select ARM_PATCH_PHYS_VIRT 6 select AUTO_ZRELADDR if !ZBOOT_ROM 7 select CLKSRC_MMIO 8 select COMMON_CLK 9 select GENERIC_ALLOCATOR 10 select GENERIC_CLOCKEVENTS 11 select GENERIC_IRQ_CHIP 12 select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7 13 select MULTI_IRQ_HANDLER 14 select SOC_BUS 15 select SPARSE_IRQ 16 select USE_OF 17 help 18 Support for Freescale MXC/iMX-based family of processors 19 20menu "Freescale i.MX support" 21 depends on ARCH_MXC 22 23config MXC_IRQ_PRIOR 24 bool "Use IRQ priority" 25 help 26 Select this if you want to use prioritized IRQ handling. 27 This feature prevents higher priority ISR to be interrupted 28 by lower priority IRQ. 29 This may be useful in embedded applications, where are strong 30 requirements for timing. 31 Say N here, unless you have a specialized requirement. 32 33config MXC_TZIC 34 bool 35 36config MXC_AVIC 37 bool 38 39config MXC_DEBUG_BOARD 40 bool "Enable MXC debug board(for 3-stack)" 41 help 42 The debug board is an integral part of the MXC 3-stack(PDK) 43 platforms, it can be attached or removed from the peripheral 44 board. On debug board, several debug devices(ethernet, UART, 45 buttons, LEDs and JTAG) are implemented. Between the MCU and 46 these devices, a CPLD is added as a bridge which performs 47 data/address de-multiplexing and decode, signal level shift, 48 interrupt control and various board functions. 49 50config HAVE_EPIT 51 bool 52 53config MXC_USE_EPIT 54 bool "Use EPIT instead of GPT" 55 depends on HAVE_EPIT 56 help 57 Use EPIT as the system timer on systems that have it. Normally you 58 don't have a reason to do so as the EPIT has the same features and 59 uses the same clocks as the GPT. Anyway, on some systems the GPT 60 may be in use for other purposes. 61 62config ARCH_HAS_RNGA 63 bool 64 65config HAVE_IMX_ANATOP 66 bool 67 68config HAVE_IMX_GPC 69 bool 70 71config HAVE_IMX_MMDC 72 bool 73 74config HAVE_IMX_SRC 75 def_bool y if SMP 76 select ARCH_HAS_RESET_CONTROLLER 77 78config IMX_HAVE_IOMUX_V1 79 bool 80 81config ARCH_MXC_IOMUX_V3 82 bool 83 84config ARCH_MX1 85 bool 86 87config ARCH_MX25 88 bool 89 90config MACH_MX27 91 bool 92 93config SOC_IMX1 94 bool 95 select ARCH_MX1 96 select CPU_ARM920T 97 select IMX_HAVE_IOMUX_V1 98 select MXC_AVIC 99 100config SOC_IMX21 101 bool 102 select CPU_ARM926T 103 select IMX_HAVE_IOMUX_V1 104 select MXC_AVIC 105 106config SOC_IMX25 107 bool 108 select ARCH_MX25 109 select ARCH_MXC_IOMUX_V3 110 select CPU_ARM926T 111 select MXC_AVIC 112 113config SOC_IMX27 114 bool 115 select ARCH_HAS_CPUFREQ 116 select ARCH_HAS_OPP 117 select CPU_ARM926T 118 select IMX_HAVE_IOMUX_V1 119 select MACH_MX27 120 select MXC_AVIC 121 122config SOC_IMX31 123 bool 124 select CPU_V6 125 select IMX_HAVE_PLATFORM_MXC_RNGA 126 select MXC_AVIC 127 select SMP_ON_UP if SMP 128 129config SOC_IMX35 130 bool 131 select ARCH_MXC_IOMUX_V3 132 select CPU_V6K 133 select HAVE_EPIT 134 select MXC_AVIC 135 select SMP_ON_UP if SMP 136 137config SOC_IMX5 138 bool 139 select ARCH_HAS_CPUFREQ 140 select ARCH_HAS_OPP 141 select ARCH_MXC_IOMUX_V3 142 select CPU_V7 143 select MXC_TZIC 144 145config SOC_IMX51 146 bool 147 select HAVE_IMX_SRC 148 select PINCTRL 149 select PINCTRL_IMX51 150 select SOC_IMX5 151 152if ARCH_MULTI_V4T 153 154comment "MX1 platforms:" 155config MACH_MXLADS 156 bool 157 158config ARCH_MX1ADS 159 bool "MX1ADS platform" 160 select IMX_HAVE_PLATFORM_IMX_I2C 161 select IMX_HAVE_PLATFORM_IMX_UART 162 select MACH_MXLADS 163 select SOC_IMX1 164 help 165 Say Y here if you are using Motorola MX1ADS/MXLADS boards 166 167config MACH_SCB9328 168 bool "Synertronixx scb9328" 169 select IMX_HAVE_PLATFORM_IMX_UART 170 select SOC_IMX1 171 help 172 Say Y here if you are using a Synertronixx scb9328 board 173 174config MACH_APF9328 175 bool "APF9328" 176 select IMX_HAVE_PLATFORM_IMX_I2C 177 select IMX_HAVE_PLATFORM_IMX_UART 178 select SOC_IMX1 179 help 180 Say Yes here if you are using the Armadeus APF9328 development board 181 182endif 183 184if ARCH_MULTI_V5 185 186comment "MX21 platforms:" 187 188config MACH_MX21ADS 189 bool "MX21ADS platform" 190 select IMX_HAVE_PLATFORM_IMX_FB 191 select IMX_HAVE_PLATFORM_IMX_UART 192 select IMX_HAVE_PLATFORM_MXC_MMC 193 select IMX_HAVE_PLATFORM_MXC_NAND 194 select SOC_IMX21 195 help 196 Include support for MX21ADS platform. This includes specific 197 configurations for the board and its peripherals. 198 199comment "MX25 platforms:" 200 201config MACH_MX25_3DS 202 bool "Support MX25PDK (3DS) Platform" 203 select IMX_HAVE_PLATFORM_FLEXCAN 204 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 205 select IMX_HAVE_PLATFORM_IMX2_WDT 206 select IMX_HAVE_PLATFORM_IMXDI_RTC 207 select IMX_HAVE_PLATFORM_IMX_FB 208 select IMX_HAVE_PLATFORM_IMX_I2C 209 select IMX_HAVE_PLATFORM_IMX_KEYPAD 210 select IMX_HAVE_PLATFORM_IMX_UART 211 select IMX_HAVE_PLATFORM_MXC_EHCI 212 select IMX_HAVE_PLATFORM_MXC_NAND 213 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 214 select SOC_IMX25 215 216config MACH_EUKREA_CPUIMX25SD 217 bool "Support Eukrea CPUIMX25 Platform" 218 select IMX_HAVE_PLATFORM_FLEXCAN 219 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 220 select IMX_HAVE_PLATFORM_IMX2_WDT 221 select IMX_HAVE_PLATFORM_IMXDI_RTC 222 select IMX_HAVE_PLATFORM_IMX_FB 223 select IMX_HAVE_PLATFORM_IMX_I2C 224 select IMX_HAVE_PLATFORM_IMX_UART 225 select IMX_HAVE_PLATFORM_MXC_EHCI 226 select IMX_HAVE_PLATFORM_MXC_NAND 227 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 228 select USB_ULPI_VIEWPORT if USB_ULPI 229 select SOC_IMX25 230 231choice 232 prompt "Baseboard" 233 depends on MACH_EUKREA_CPUIMX25SD 234 default MACH_EUKREA_MBIMXSD25_BASEBOARD 235 236config MACH_EUKREA_MBIMXSD25_BASEBOARD 237 bool "Eukrea MBIMXSD development board" 238 select IMX_HAVE_PLATFORM_GPIO_KEYS 239 select IMX_HAVE_PLATFORM_IMX_SSI 240 select IMX_HAVE_PLATFORM_SPI_IMX 241 select LEDS_GPIO_REGISTER 242 help 243 This adds board specific devices that can be found on Eukrea's 244 MBIMXSD evaluation board. 245 246endchoice 247 248config MACH_IMX25_DT 249 bool "Support i.MX25 platforms from device tree" 250 select SOC_IMX25 251 help 252 Include support for Freescale i.MX25 based platforms 253 using the device tree for discovery 254 255comment "MX27 platforms:" 256 257config MACH_MX27ADS 258 bool "MX27ADS platform" 259 select IMX_HAVE_PLATFORM_IMX_FB 260 select IMX_HAVE_PLATFORM_IMX_I2C 261 select IMX_HAVE_PLATFORM_IMX_UART 262 select IMX_HAVE_PLATFORM_MXC_MMC 263 select IMX_HAVE_PLATFORM_MXC_NAND 264 select IMX_HAVE_PLATFORM_MXC_W1 265 select SOC_IMX27 266 help 267 Include support for MX27ADS platform. This includes specific 268 configurations for the board and its peripherals. 269 270config MACH_PCM038 271 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 272 select IMX_HAVE_PLATFORM_IMX2_WDT 273 select IMX_HAVE_PLATFORM_IMX_I2C 274 select IMX_HAVE_PLATFORM_IMX_UART 275 select IMX_HAVE_PLATFORM_MXC_EHCI 276 select IMX_HAVE_PLATFORM_MXC_NAND 277 select IMX_HAVE_PLATFORM_MXC_W1 278 select IMX_HAVE_PLATFORM_SPI_IMX 279 select USB_ULPI_VIEWPORT if USB_ULPI 280 select SOC_IMX27 281 help 282 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 283 includes specific configurations for the module and its peripherals. 284 285choice 286 prompt "Baseboard" 287 depends on MACH_PCM038 288 default MACH_PCM970_BASEBOARD 289 290config MACH_PCM970_BASEBOARD 291 bool "PHYTEC PCM970 development board" 292 select IMX_HAVE_PLATFORM_IMX_FB 293 select IMX_HAVE_PLATFORM_MXC_MMC 294 help 295 This adds board specific devices that can be found on Phytec's 296 PCM970 evaluation board. 297 298endchoice 299 300config MACH_CPUIMX27 301 bool "Eukrea CPUIMX27 module" 302 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 303 select IMX_HAVE_PLATFORM_IMX2_WDT 304 select IMX_HAVE_PLATFORM_IMX_I2C 305 select IMX_HAVE_PLATFORM_IMX_UART 306 select IMX_HAVE_PLATFORM_MXC_EHCI 307 select IMX_HAVE_PLATFORM_MXC_NAND 308 select IMX_HAVE_PLATFORM_MXC_W1 309 select USB_ULPI_VIEWPORT if USB_ULPI 310 select SOC_IMX27 311 help 312 Include support for Eukrea CPUIMX27 platform. This includes 313 specific configurations for the module and its peripherals. 314 315config MACH_EUKREA_CPUIMX27_USESDHC2 316 bool "CPUIMX27 integrates SDHC2 module" 317 depends on MACH_CPUIMX27 318 select IMX_HAVE_PLATFORM_MXC_MMC 319 help 320 This adds support for the internal SDHC2 used on CPUIMX27 321 for wifi or eMMC. 322 323config MACH_EUKREA_CPUIMX27_USEUART4 324 bool "CPUIMX27 integrates UART4 module" 325 depends on MACH_CPUIMX27 326 help 327 This adds support for the internal UART4 used on CPUIMX27 328 for bluetooth. 329 330choice 331 prompt "Baseboard" 332 depends on MACH_CPUIMX27 333 default MACH_EUKREA_MBIMX27_BASEBOARD 334 335config MACH_EUKREA_MBIMX27_BASEBOARD 336 bool "Eukrea MBIMX27 development board" 337 select IMX_HAVE_PLATFORM_IMX_FB 338 select IMX_HAVE_PLATFORM_IMX_KEYPAD 339 select IMX_HAVE_PLATFORM_IMX_SSI 340 select IMX_HAVE_PLATFORM_IMX_UART 341 select IMX_HAVE_PLATFORM_MXC_MMC 342 select IMX_HAVE_PLATFORM_SPI_IMX 343 select LEDS_GPIO_REGISTER 344 help 345 This adds board specific devices that can be found on Eukrea's 346 MBIMX27 evaluation board. 347 348endchoice 349 350config MACH_MX27_3DS 351 bool "MX27PDK platform" 352 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 353 select IMX_HAVE_PLATFORM_IMX2_WDT 354 select IMX_HAVE_PLATFORM_IMX_FB 355 select IMX_HAVE_PLATFORM_IMX_I2C 356 select IMX_HAVE_PLATFORM_IMX_KEYPAD 357 select IMX_HAVE_PLATFORM_IMX_SSI 358 select IMX_HAVE_PLATFORM_IMX_UART 359 select IMX_HAVE_PLATFORM_MX2_CAMERA 360 select IMX_HAVE_PLATFORM_MXC_EHCI 361 select IMX_HAVE_PLATFORM_MXC_MMC 362 select IMX_HAVE_PLATFORM_SPI_IMX 363 select MXC_DEBUG_BOARD 364 select USB_ULPI_VIEWPORT if USB_ULPI 365 select SOC_IMX27 366 help 367 Include support for MX27PDK platform. This includes specific 368 configurations for the board and its peripherals. 369 370config MACH_IMX27_VISSTRIM_M10 371 bool "Vista Silicon i.MX27 Visstrim_m10" 372 select IMX_HAVE_PLATFORM_GPIO_KEYS 373 select IMX_HAVE_PLATFORM_IMX_I2C 374 select IMX_HAVE_PLATFORM_IMX_SSI 375 select IMX_HAVE_PLATFORM_IMX_UART 376 select IMX_HAVE_PLATFORM_MX2_CAMERA 377 select IMX_HAVE_PLATFORM_MX2_EMMA 378 select IMX_HAVE_PLATFORM_MXC_EHCI 379 select IMX_HAVE_PLATFORM_MXC_MMC 380 select LEDS_GPIO_REGISTER 381 select SOC_IMX27 382 help 383 Include support for Visstrim_m10 platform and its different variants. 384 This includes specific configurations for the board and its 385 peripherals. 386 387config MACH_IMX27LITE 388 bool "LogicPD MX27 LITEKIT platform" 389 select IMX_HAVE_PLATFORM_IMX_SSI 390 select IMX_HAVE_PLATFORM_IMX_UART 391 select SOC_IMX27 392 help 393 Include support for MX27 LITEKIT platform. This includes specific 394 configurations for the board and its peripherals. 395 396config MACH_PCA100 397 bool "Phytec phyCARD-s (pca100)" 398 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 399 select IMX_HAVE_PLATFORM_IMX2_WDT 400 select IMX_HAVE_PLATFORM_IMX_FB 401 select IMX_HAVE_PLATFORM_IMX_I2C 402 select IMX_HAVE_PLATFORM_IMX_SSI 403 select IMX_HAVE_PLATFORM_IMX_UART 404 select IMX_HAVE_PLATFORM_MXC_EHCI 405 select IMX_HAVE_PLATFORM_MXC_MMC 406 select IMX_HAVE_PLATFORM_MXC_NAND 407 select IMX_HAVE_PLATFORM_MXC_W1 408 select IMX_HAVE_PLATFORM_SPI_IMX 409 select USB_ULPI_VIEWPORT if USB_ULPI 410 select SOC_IMX27 411 help 412 Include support for phyCARD-s (aka pca100) platform. This 413 includes specific configurations for the module and its peripherals. 414 415config MACH_MXT_TD60 416 bool "Maxtrack i-MXT TD60" 417 select IMX_HAVE_PLATFORM_IMX_FB 418 select IMX_HAVE_PLATFORM_IMX_I2C 419 select IMX_HAVE_PLATFORM_IMX_UART 420 select IMX_HAVE_PLATFORM_MXC_MMC 421 select IMX_HAVE_PLATFORM_MXC_NAND 422 select SOC_IMX27 423 help 424 Include support for i-MXT (aka td60) platform. This 425 includes specific configurations for the module and its peripherals. 426 427config MACH_IMX27IPCAM 428 bool "IMX27 IPCAM platform" 429 select IMX_HAVE_PLATFORM_IMX2_WDT 430 select IMX_HAVE_PLATFORM_IMX_UART 431 select SOC_IMX27 432 help 433 Include support for IMX27 IPCAM platform. This includes specific 434 configurations for the board and its peripherals. 435 436config MACH_IMX27_DT 437 bool "Support i.MX27 platforms from device tree" 438 select SOC_IMX27 439 help 440 Include support for Freescale i.MX27 based platforms 441 using the device tree for discovery 442 443endif 444 445if ARCH_MULTI_V6 446 447comment "MX31 platforms:" 448 449config MACH_MX31ADS 450 bool "Support MX31ADS platforms" 451 default y 452 select IMX_HAVE_PLATFORM_IMX_I2C 453 select IMX_HAVE_PLATFORM_IMX_SSI 454 select IMX_HAVE_PLATFORM_IMX_UART 455 select SOC_IMX31 456 help 457 Include support for MX31ADS platform. This includes specific 458 configurations for the board and its peripherals. 459 460config MACH_MX31ADS_WM1133_EV1 461 bool "Support Wolfson Microelectronics 1133-EV1 module" 462 depends on MACH_MX31ADS 463 depends on MFD_WM8350_I2C 464 depends on REGULATOR_WM8350 = y 465 help 466 Include support for the Wolfson Microelectronics 1133-EV1 PMU 467 and audio module for the MX31ADS platform. 468 469config MACH_MX31LILLY 470 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 471 select IMX_HAVE_PLATFORM_IMX_UART 472 select IMX_HAVE_PLATFORM_IPU_CORE 473 select IMX_HAVE_PLATFORM_MXC_EHCI 474 select IMX_HAVE_PLATFORM_MXC_MMC 475 select IMX_HAVE_PLATFORM_SPI_IMX 476 select USB_ULPI_VIEWPORT if USB_ULPI 477 select SOC_IMX31 478 help 479 Include support for mx31 based LILLY1131 modules. This includes 480 specific configurations for the board and its peripherals. 481 482config MACH_MX31LITE 483 bool "Support MX31 LITEKIT (LogicPD)" 484 select IMX_HAVE_PLATFORM_IMX2_WDT 485 select IMX_HAVE_PLATFORM_IMX_UART 486 select IMX_HAVE_PLATFORM_MXC_EHCI 487 select IMX_HAVE_PLATFORM_MXC_MMC 488 select IMX_HAVE_PLATFORM_MXC_NAND 489 select IMX_HAVE_PLATFORM_MXC_RTC 490 select IMX_HAVE_PLATFORM_SPI_IMX 491 select LEDS_GPIO_REGISTER 492 select USB_ULPI_VIEWPORT if USB_ULPI 493 select SOC_IMX31 494 help 495 Include support for MX31 LITEKIT platform. This includes specific 496 configurations for the board and its peripherals. 497 498config MACH_PCM037 499 bool "Support Phytec pcm037 (i.MX31) platforms" 500 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 501 select IMX_HAVE_PLATFORM_IMX2_WDT 502 select IMX_HAVE_PLATFORM_IMX_I2C 503 select IMX_HAVE_PLATFORM_IMX_UART 504 select IMX_HAVE_PLATFORM_IPU_CORE 505 select IMX_HAVE_PLATFORM_MXC_EHCI 506 select IMX_HAVE_PLATFORM_MXC_MMC 507 select IMX_HAVE_PLATFORM_MXC_NAND 508 select IMX_HAVE_PLATFORM_MXC_W1 509 select USB_ULPI_VIEWPORT if USB_ULPI 510 select SOC_IMX31 511 help 512 Include support for Phytec pcm037 platform. This includes 513 specific configurations for the board and its peripherals. 514 515config MACH_PCM037_EET 516 bool "Support pcm037 EET board extensions" 517 depends on MACH_PCM037 518 select IMX_HAVE_PLATFORM_GPIO_KEYS 519 select IMX_HAVE_PLATFORM_SPI_IMX 520 help 521 Add support for PCM037 EET baseboard extensions. If you are using the 522 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 523 command-line parameter. 524 525config MACH_MX31_3DS 526 bool "Support MX31PDK (3DS)" 527 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 528 select IMX_HAVE_PLATFORM_IMX2_WDT 529 select IMX_HAVE_PLATFORM_IMX_I2C 530 select IMX_HAVE_PLATFORM_IMX_KEYPAD 531 select IMX_HAVE_PLATFORM_IMX_SSI 532 select IMX_HAVE_PLATFORM_IMX_UART 533 select IMX_HAVE_PLATFORM_IPU_CORE 534 select IMX_HAVE_PLATFORM_MXC_EHCI 535 select IMX_HAVE_PLATFORM_MXC_MMC 536 select IMX_HAVE_PLATFORM_MXC_NAND 537 select IMX_HAVE_PLATFORM_SPI_IMX 538 select MXC_DEBUG_BOARD 539 select USB_ULPI_VIEWPORT if USB_ULPI 540 select SOC_IMX31 541 help 542 Include support for MX31PDK (3DS) platform. This includes specific 543 configurations for the board and its peripherals. 544 545config MACH_MX31_3DS_MXC_NAND_USE_BBT 546 bool "Make the MXC NAND driver use the in flash Bad Block Table" 547 depends on MACH_MX31_3DS 548 depends on MTD_NAND_MXC 549 help 550 Enable this if you want that the MXC NAND driver uses the in flash 551 Bad Block Table to know what blocks are bad instead of scanning the 552 entire flash looking for bad block markers. 553 554config MACH_MX31MOBOARD 555 bool "Support mx31moboard platforms (EPFL Mobots group)" 556 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 557 select IMX_HAVE_PLATFORM_IMX2_WDT 558 select IMX_HAVE_PLATFORM_IMX_I2C 559 select IMX_HAVE_PLATFORM_IMX_SSI 560 select IMX_HAVE_PLATFORM_IMX_UART 561 select IMX_HAVE_PLATFORM_IPU_CORE 562 select IMX_HAVE_PLATFORM_MXC_EHCI 563 select IMX_HAVE_PLATFORM_MXC_MMC 564 select IMX_HAVE_PLATFORM_SPI_IMX 565 select LEDS_GPIO_REGISTER 566 select USB_ULPI_VIEWPORT if USB_ULPI 567 select SOC_IMX31 568 help 569 Include support for mx31moboard platform. This includes specific 570 configurations for the board and its peripherals. 571 572config MACH_QONG 573 bool "Support Dave/DENX QongEVB-LITE platform" 574 select IMX_HAVE_PLATFORM_IMX2_WDT 575 select IMX_HAVE_PLATFORM_IMX_UART 576 select SOC_IMX31 577 help 578 Include support for Dave/DENX QongEVB-LITE platform. This includes 579 specific configurations for the board and its peripherals. 580 581config MACH_ARMADILLO5X0 582 bool "Support Atmark Armadillo-500 Development Base Board" 583 select IMX_HAVE_PLATFORM_GPIO_KEYS 584 select IMX_HAVE_PLATFORM_IMX_I2C 585 select IMX_HAVE_PLATFORM_IMX_UART 586 select IMX_HAVE_PLATFORM_IPU_CORE 587 select IMX_HAVE_PLATFORM_MXC_EHCI 588 select IMX_HAVE_PLATFORM_MXC_MMC 589 select IMX_HAVE_PLATFORM_MXC_NAND 590 select USB_ULPI_VIEWPORT if USB_ULPI 591 select SOC_IMX31 592 help 593 Include support for Atmark Armadillo-500 platform. This includes 594 specific configurations for the board and its peripherals. 595 596config MACH_KZM_ARM11_01 597 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 598 select IMX_HAVE_PLATFORM_IMX_UART 599 select SOC_IMX31 600 help 601 Include support for KZM-ARM11-01. This includes specific 602 configurations for the board and its peripherals. 603 604config MACH_BUG 605 bool "Support Buglabs BUGBase platform" 606 default y 607 select IMX_HAVE_PLATFORM_IMX_UART 608 select SOC_IMX31 609 help 610 Include support for BUGBase 1.3 platform. This includes specific 611 configurations for the board and its peripherals. 612 613config MACH_IMX31_DT 614 bool "Support i.MX31 platforms from device tree" 615 select SOC_IMX31 616 help 617 Include support for Freescale i.MX31 based platforms 618 using the device tree for discovery. 619 620comment "MX35 platforms:" 621 622config MACH_PCM043 623 bool "Support Phytec pcm043 (i.MX35) platforms" 624 select IMX_HAVE_PLATFORM_FLEXCAN 625 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 626 select IMX_HAVE_PLATFORM_IMX2_WDT 627 select IMX_HAVE_PLATFORM_IMX_I2C 628 select IMX_HAVE_PLATFORM_IMX_SSI 629 select IMX_HAVE_PLATFORM_IMX_UART 630 select IMX_HAVE_PLATFORM_IPU_CORE 631 select IMX_HAVE_PLATFORM_MXC_EHCI 632 select IMX_HAVE_PLATFORM_MXC_NAND 633 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 634 select USB_ULPI_VIEWPORT if USB_ULPI 635 select SOC_IMX35 636 help 637 Include support for Phytec pcm043 platform. This includes 638 specific configurations for the board and its peripherals. 639 640config MACH_MX35_3DS 641 bool "Support MX35PDK platform" 642 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 643 select IMX_HAVE_PLATFORM_IMX2_WDT 644 select IMX_HAVE_PLATFORM_IMX_FB 645 select IMX_HAVE_PLATFORM_IMX_I2C 646 select IMX_HAVE_PLATFORM_IMX_UART 647 select IMX_HAVE_PLATFORM_IPU_CORE 648 select IMX_HAVE_PLATFORM_MXC_EHCI 649 select IMX_HAVE_PLATFORM_MXC_NAND 650 select IMX_HAVE_PLATFORM_MXC_RTC 651 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 652 select MXC_DEBUG_BOARD 653 select SOC_IMX35 654 help 655 Include support for MX35PDK platform. This includes specific 656 configurations for the board and its peripherals. 657 658config MACH_EUKREA_CPUIMX35SD 659 bool "Support Eukrea CPUIMX35 Platform" 660 select IMX_HAVE_PLATFORM_FLEXCAN 661 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 662 select IMX_HAVE_PLATFORM_IMX2_WDT 663 select IMX_HAVE_PLATFORM_IMX_I2C 664 select IMX_HAVE_PLATFORM_IMX_UART 665 select IMX_HAVE_PLATFORM_MXC_EHCI 666 select IMX_HAVE_PLATFORM_MXC_NAND 667 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 668 select USB_ULPI_VIEWPORT if USB_ULPI 669 select SOC_IMX35 670 help 671 Include support for Eukrea CPUIMX35 platform. This includes 672 specific configurations for the board and its peripherals. 673 674choice 675 prompt "Baseboard" 676 depends on MACH_EUKREA_CPUIMX35SD 677 default MACH_EUKREA_MBIMXSD35_BASEBOARD 678 679config MACH_EUKREA_MBIMXSD35_BASEBOARD 680 bool "Eukrea MBIMXSD development board" 681 select IMX_HAVE_PLATFORM_GPIO_KEYS 682 select IMX_HAVE_PLATFORM_IMX_SSI 683 select IMX_HAVE_PLATFORM_IPU_CORE 684 select IMX_HAVE_PLATFORM_SPI_IMX 685 select LEDS_GPIO_REGISTER 686 help 687 This adds board specific devices that can be found on Eukrea's 688 MBIMXSD evaluation board. 689 690endchoice 691 692config MACH_VPR200 693 bool "Support VPR200 platform" 694 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 695 select IMX_HAVE_PLATFORM_GPIO_KEYS 696 select IMX_HAVE_PLATFORM_IMX2_WDT 697 select IMX_HAVE_PLATFORM_IMX_I2C 698 select IMX_HAVE_PLATFORM_IMX_UART 699 select IMX_HAVE_PLATFORM_IPU_CORE 700 select IMX_HAVE_PLATFORM_MXC_EHCI 701 select IMX_HAVE_PLATFORM_MXC_NAND 702 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 703 select SOC_IMX35 704 help 705 Include support for VPR200 platform. This includes specific 706 configurations for the board and its peripherals. 707 708endif 709 710if ARCH_MULTI_V7 711 712comment "i.MX51 machines:" 713 714config MACH_IMX51_DT 715 bool "Support i.MX51 platforms from device tree" 716 select SOC_IMX51 717 help 718 Include support for Freescale i.MX51 based platforms 719 using the device tree for discovery 720 721config MACH_MX51_BABBAGE 722 bool "Support MX51 BABBAGE platforms" 723 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 724 select IMX_HAVE_PLATFORM_IMX2_WDT 725 select IMX_HAVE_PLATFORM_IMX_I2C 726 select IMX_HAVE_PLATFORM_IMX_UART 727 select IMX_HAVE_PLATFORM_MXC_EHCI 728 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 729 select IMX_HAVE_PLATFORM_SPI_IMX 730 select SOC_IMX51 731 help 732 Include support for MX51 Babbage platform, also known as MX51EVK in 733 u-boot. This includes specific configurations for the board and its 734 peripherals. 735 736config MACH_EUKREA_CPUIMX51SD 737 bool "Support Eukrea CPUIMX51SD module" 738 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 739 select IMX_HAVE_PLATFORM_IMX2_WDT 740 select IMX_HAVE_PLATFORM_IMX_I2C 741 select IMX_HAVE_PLATFORM_IMX_UART 742 select IMX_HAVE_PLATFORM_MXC_EHCI 743 select IMX_HAVE_PLATFORM_MXC_NAND 744 select IMX_HAVE_PLATFORM_SPI_IMX 745 select SOC_IMX51 746 help 747 Include support for Eukrea CPUIMX51SD platform. This includes 748 specific configurations for the module and its peripherals. 749 750choice 751 prompt "Baseboard" 752 depends on MACH_EUKREA_CPUIMX51SD 753 default MACH_EUKREA_MBIMXSD51_BASEBOARD 754 755config MACH_EUKREA_MBIMXSD51_BASEBOARD 756 prompt "Eukrea MBIMXSD development board" 757 bool 758 select IMX_HAVE_PLATFORM_IMX_SSI 759 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 760 select LEDS_GPIO_REGISTER 761 help 762 This adds board specific devices that can be found on Eukrea's 763 MBIMXSD evaluation board. 764 765endchoice 766 767comment "Device tree only" 768 769config SOC_IMX50 770 bool "i.MX50 support" 771 select HAVE_IMX_SRC 772 select SOC_IMX5 773 774 help 775 This enables support for Freescale i.MX50 processor. 776 777config SOC_IMX53 778 bool "i.MX53 support" 779 select HAVE_IMX_SRC 780 select IMX_HAVE_PLATFORM_IMX2_WDT 781 select PINCTRL 782 select PINCTRL_IMX53 783 select SOC_IMX5 784 785 help 786 This enables support for Freescale i.MX53 processor. 787 788config SOC_IMX6Q 789 bool "i.MX6 Quad/DualLite support" 790 select ARCH_HAS_CPUFREQ 791 select ARCH_HAS_OPP 792 select ARM_ERRATA_754322 793 select ARM_ERRATA_764369 if SMP 794 select ARM_ERRATA_775420 795 select ARM_GIC 796 select CPU_V7 797 select HAVE_ARM_SCU if SMP 798 select HAVE_ARM_TWD if SMP 799 select HAVE_IMX_ANATOP 800 select HAVE_IMX_GPC 801 select HAVE_IMX_MMDC 802 select HAVE_IMX_SRC 803 select HAVE_SMP 804 select MFD_SYSCON 805 select MIGHT_HAVE_PCI 806 select PCI_DOMAINS if PCI 807 select PINCTRL 808 select PINCTRL_IMX6Q 809 select PL310_ERRATA_588369 if CACHE_PL310 810 select PL310_ERRATA_727915 if CACHE_PL310 811 select PL310_ERRATA_769419 if CACHE_PL310 812 select PM_OPP if PM 813 814 help 815 This enables support for Freescale i.MX6 Quad processor. 816 817config SOC_IMX6SL 818 bool "i.MX6 SoloLite support" 819 select ARM_ERRATA_754322 820 select ARM_ERRATA_775420 821 select ARM_GIC 822 select CPU_V7 823 select HAVE_IMX_ANATOP 824 select HAVE_IMX_GPC 825 select HAVE_IMX_MMDC 826 select HAVE_IMX_SRC 827 select MFD_SYSCON 828 select PINCTRL 829 select PINCTRL_IMX6SL 830 select PL310_ERRATA_588369 if CACHE_PL310 831 select PL310_ERRATA_727915 if CACHE_PL310 832 select PL310_ERRATA_769419 if CACHE_PL310 833 834 help 835 This enables support for Freescale i.MX6 SoloLite processor. 836 837config SOC_VF610 838 bool "Vybrid Family VF610 support" 839 select CPU_V7 840 select ARM_GIC 841 select CLKSRC_OF 842 select PINCTRL 843 select PINCTRL_VF610 844 select VF_PIT_TIMER 845 select PL310_ERRATA_588369 if CACHE_PL310 846 select PL310_ERRATA_727915 if CACHE_PL310 847 select PL310_ERRATA_769419 if CACHE_PL310 848 849 help 850 This enable support for Freescale Vybrid VF610 processor. 851 852endif 853 854source "arch/arm/mach-imx/devices/Kconfig" 855 856endmenu 857