1config ARCH_MXC 2 bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 3 select ARCH_REQUIRE_GPIOLIB 4 select ARM_PATCH_PHYS_VIRT 5 select AUTO_ZRELADDR if !ZBOOT_ROM 6 select CLKDEV_LOOKUP 7 select CLKSRC_MMIO 8 select GENERIC_CLOCKEVENTS 9 select GENERIC_IRQ_CHIP 10 select MULTI_IRQ_HANDLER 11 select SPARSE_IRQ 12 select USE_OF 13 help 14 Support for Freescale MXC/iMX-based family of processors 15 16menu "Freescale i.MX support" 17 depends on ARCH_MXC 18 19config MXC_IRQ_PRIOR 20 bool "Use IRQ priority" 21 help 22 Select this if you want to use prioritized IRQ handling. 23 This feature prevents higher priority ISR to be interrupted 24 by lower priority IRQ even IRQF_DISABLED flag is not set. 25 This may be useful in embedded applications, where are strong 26 requirements for timing. 27 Say N here, unless you have a specialized requirement. 28 29config MXC_TZIC 30 bool 31 32config MXC_AVIC 33 bool 34 35config MXC_DEBUG_BOARD 36 bool "Enable MXC debug board(for 3-stack)" 37 help 38 The debug board is an integral part of the MXC 3-stack(PDK) 39 platforms, it can be attached or removed from the peripheral 40 board. On debug board, several debug devices(ethernet, UART, 41 buttons, LEDs and JTAG) are implemented. Between the MCU and 42 these devices, a CPLD is added as a bridge which performs 43 data/address de-multiplexing and decode, signal level shift, 44 interrupt control and various board functions. 45 46config HAVE_EPIT 47 bool 48 49config MXC_USE_EPIT 50 bool "Use EPIT instead of GPT" 51 depends on HAVE_EPIT 52 help 53 Use EPIT as the system timer on systems that have it. Normally you 54 don't have a reason to do so as the EPIT has the same features and 55 uses the same clocks as the GPT. Anyway, on some systems the GPT 56 may be in use for other purposes. 57 58config MXC_ULPI 59 bool 60 61config ARCH_HAS_RNGA 62 bool 63 64config IRAM_ALLOC 65 bool 66 select GENERIC_ALLOCATOR 67 68config HAVE_IMX_GPC 69 bool 70 71config HAVE_IMX_MMDC 72 bool 73 74config HAVE_IMX_SRC 75 def_bool y if SMP 76 77config IMX_HAVE_IOMUX_V1 78 bool 79 80config ARCH_MXC_IOMUX_V3 81 bool 82 83config ARCH_MX1 84 bool 85 86config MACH_MX21 87 bool 88 89config ARCH_MX25 90 bool 91 92config MACH_MX27 93 bool 94 95config ARCH_MX5 96 bool 97 98config ARCH_MX50 99 bool 100 101config ARCH_MX51 102 bool 103 104config ARCH_MX53 105 bool 106 107config SOC_IMX1 108 bool 109 select ARCH_MX1 110 select COMMON_CLK 111 select CPU_ARM920T 112 select IMX_HAVE_IOMUX_V1 113 select MXC_AVIC 114 115config SOC_IMX21 116 bool 117 select COMMON_CLK 118 select CPU_ARM926T 119 select IMX_HAVE_IOMUX_V1 120 select MACH_MX21 121 select MXC_AVIC 122 123config SOC_IMX25 124 bool 125 select ARCH_MX25 126 select ARCH_MXC_IOMUX_V3 127 select COMMON_CLK 128 select CPU_ARM926T 129 select HAVE_CAN_FLEXCAN if CAN 130 select MXC_AVIC 131 132config SOC_IMX27 133 bool 134 select COMMON_CLK 135 select CPU_ARM926T 136 select IMX_HAVE_IOMUX_V1 137 select MACH_MX27 138 select MXC_AVIC 139 140config SOC_IMX31 141 bool 142 select COMMON_CLK 143 select CPU_V6 144 select IMX_HAVE_PLATFORM_MXC_RNGA 145 select MXC_AVIC 146 select SMP_ON_UP if SMP 147 148config SOC_IMX35 149 bool 150 select ARCH_MXC_IOMUX_V3 151 select COMMON_CLK 152 select CPU_V6K 153 select HAVE_CAN_FLEXCAN if CAN 154 select HAVE_EPIT 155 select MXC_AVIC 156 select SMP_ON_UP if SMP 157 158config SOC_IMX5 159 bool 160 select ARCH_HAS_CPUFREQ 161 select ARCH_MX5 162 select ARCH_MXC_IOMUX_V3 163 select COMMON_CLK 164 select CPU_V7 165 select MXC_TZIC 166 167config SOC_IMX50 168 bool 169 select ARCH_MX50 170 select SOC_IMX5 171 172config SOC_IMX51 173 bool 174 select ARCH_MX5 175 select ARCH_MX51 176 select PINCTRL 177 select PINCTRL_IMX51 178 select SOC_IMX5 179 180if ARCH_MULTI_V4T 181 182comment "MX1 platforms:" 183config MACH_MXLADS 184 bool 185 186config ARCH_MX1ADS 187 bool "MX1ADS platform" 188 select IMX_HAVE_PLATFORM_IMX_I2C 189 select IMX_HAVE_PLATFORM_IMX_UART 190 select MACH_MXLADS 191 select SOC_IMX1 192 help 193 Say Y here if you are using Motorola MX1ADS/MXLADS boards 194 195config MACH_SCB9328 196 bool "Synertronixx scb9328" 197 select IMX_HAVE_PLATFORM_IMX_UART 198 help 199 Say Y here if you are using a Synertronixx scb9328 board 200 201config MACH_APF9328 202 bool "APF9328" 203 select IMX_HAVE_PLATFORM_IMX_I2C 204 select IMX_HAVE_PLATFORM_IMX_UART 205 select SOC_IMX1 206 help 207 Say Yes here if you are using the Armadeus APF9328 development board 208 209endif 210 211if ARCH_MULTI_V5 212 213comment "MX21 platforms:" 214 215config MACH_MX21ADS 216 bool "MX21ADS platform" 217 select IMX_HAVE_PLATFORM_IMX_FB 218 select IMX_HAVE_PLATFORM_IMX_UART 219 select IMX_HAVE_PLATFORM_MXC_MMC 220 select IMX_HAVE_PLATFORM_MXC_NAND 221 select SOC_IMX21 222 help 223 Include support for MX21ADS platform. This includes specific 224 configurations for the board and its peripherals. 225 226comment "MX25 platforms:" 227 228config MACH_MX25_3DS 229 bool "Support MX25PDK (3DS) Platform" 230 select IMX_HAVE_PLATFORM_FLEXCAN 231 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 232 select IMX_HAVE_PLATFORM_IMX2_WDT 233 select IMX_HAVE_PLATFORM_IMXDI_RTC 234 select IMX_HAVE_PLATFORM_IMX_FB 235 select IMX_HAVE_PLATFORM_IMX_I2C 236 select IMX_HAVE_PLATFORM_IMX_KEYPAD 237 select IMX_HAVE_PLATFORM_IMX_UART 238 select IMX_HAVE_PLATFORM_MXC_EHCI 239 select IMX_HAVE_PLATFORM_MXC_NAND 240 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 241 select SOC_IMX25 242 243config MACH_EUKREA_CPUIMX25SD 244 bool "Support Eukrea CPUIMX25 Platform" 245 select IMX_HAVE_PLATFORM_FLEXCAN 246 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 247 select IMX_HAVE_PLATFORM_IMX2_WDT 248 select IMX_HAVE_PLATFORM_IMXDI_RTC 249 select IMX_HAVE_PLATFORM_IMX_FB 250 select IMX_HAVE_PLATFORM_IMX_I2C 251 select IMX_HAVE_PLATFORM_IMX_UART 252 select IMX_HAVE_PLATFORM_MXC_EHCI 253 select IMX_HAVE_PLATFORM_MXC_NAND 254 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 255 select MXC_ULPI if USB_ULPI 256 select SOC_IMX25 257 258choice 259 prompt "Baseboard" 260 depends on MACH_EUKREA_CPUIMX25SD 261 default MACH_EUKREA_MBIMXSD25_BASEBOARD 262 263config MACH_EUKREA_MBIMXSD25_BASEBOARD 264 bool "Eukrea MBIMXSD development board" 265 select IMX_HAVE_PLATFORM_GPIO_KEYS 266 select IMX_HAVE_PLATFORM_IMX_SSI 267 select IMX_HAVE_PLATFORM_SPI_IMX 268 select LEDS_GPIO_REGISTER 269 help 270 This adds board specific devices that can be found on Eukrea's 271 MBIMXSD evaluation board. 272 273endchoice 274 275config MACH_IMX25_DT 276 bool "Support i.MX25 platforms from device tree" 277 select SOC_IMX25 278 help 279 Include support for Freescale i.MX25 based platforms 280 using the device tree for discovery 281 282comment "MX27 platforms:" 283 284config MACH_MX27ADS 285 bool "MX27ADS platform" 286 select IMX_HAVE_PLATFORM_IMX_FB 287 select IMX_HAVE_PLATFORM_IMX_I2C 288 select IMX_HAVE_PLATFORM_IMX_UART 289 select IMX_HAVE_PLATFORM_MXC_MMC 290 select IMX_HAVE_PLATFORM_MXC_NAND 291 select IMX_HAVE_PLATFORM_MXC_W1 292 select SOC_IMX27 293 help 294 Include support for MX27ADS platform. This includes specific 295 configurations for the board and its peripherals. 296 297config MACH_PCM038 298 bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" 299 select IMX_HAVE_PLATFORM_IMX2_WDT 300 select IMX_HAVE_PLATFORM_IMX_I2C 301 select IMX_HAVE_PLATFORM_IMX_UART 302 select IMX_HAVE_PLATFORM_MXC_EHCI 303 select IMX_HAVE_PLATFORM_MXC_NAND 304 select IMX_HAVE_PLATFORM_MXC_W1 305 select IMX_HAVE_PLATFORM_SPI_IMX 306 select MXC_ULPI if USB_ULPI 307 select SOC_IMX27 308 help 309 Include support for phyCORE-i.MX27 (aka pcm038) platform. This 310 includes specific configurations for the module and its peripherals. 311 312choice 313 prompt "Baseboard" 314 depends on MACH_PCM038 315 default MACH_PCM970_BASEBOARD 316 317config MACH_PCM970_BASEBOARD 318 bool "PHYTEC PCM970 development board" 319 select IMX_HAVE_PLATFORM_IMX_FB 320 select IMX_HAVE_PLATFORM_MXC_MMC 321 help 322 This adds board specific devices that can be found on Phytec's 323 PCM970 evaluation board. 324 325endchoice 326 327config MACH_CPUIMX27 328 bool "Eukrea CPUIMX27 module" 329 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 330 select IMX_HAVE_PLATFORM_IMX2_WDT 331 select IMX_HAVE_PLATFORM_IMX_I2C 332 select IMX_HAVE_PLATFORM_IMX_UART 333 select IMX_HAVE_PLATFORM_MXC_EHCI 334 select IMX_HAVE_PLATFORM_MXC_NAND 335 select IMX_HAVE_PLATFORM_MXC_W1 336 select MXC_ULPI if USB_ULPI 337 select SOC_IMX27 338 help 339 Include support for Eukrea CPUIMX27 platform. This includes 340 specific configurations for the module and its peripherals. 341 342config MACH_EUKREA_CPUIMX27_USESDHC2 343 bool "CPUIMX27 integrates SDHC2 module" 344 depends on MACH_CPUIMX27 345 select IMX_HAVE_PLATFORM_MXC_MMC 346 help 347 This adds support for the internal SDHC2 used on CPUIMX27 348 for wifi or eMMC. 349 350config MACH_EUKREA_CPUIMX27_USEUART4 351 bool "CPUIMX27 integrates UART4 module" 352 depends on MACH_CPUIMX27 353 help 354 This adds support for the internal UART4 used on CPUIMX27 355 for bluetooth. 356 357choice 358 prompt "Baseboard" 359 depends on MACH_CPUIMX27 360 default MACH_EUKREA_MBIMX27_BASEBOARD 361 362config MACH_EUKREA_MBIMX27_BASEBOARD 363 bool "Eukrea MBIMX27 development board" 364 select IMX_HAVE_PLATFORM_IMX_FB 365 select IMX_HAVE_PLATFORM_IMX_KEYPAD 366 select IMX_HAVE_PLATFORM_IMX_SSI 367 select IMX_HAVE_PLATFORM_IMX_UART 368 select IMX_HAVE_PLATFORM_MXC_MMC 369 select IMX_HAVE_PLATFORM_SPI_IMX 370 select LEDS_GPIO_REGISTER 371 help 372 This adds board specific devices that can be found on Eukrea's 373 MBIMX27 evaluation board. 374 375endchoice 376 377config MACH_MX27_3DS 378 bool "MX27PDK platform" 379 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 380 select IMX_HAVE_PLATFORM_IMX2_WDT 381 select IMX_HAVE_PLATFORM_IMX_FB 382 select IMX_HAVE_PLATFORM_IMX_I2C 383 select IMX_HAVE_PLATFORM_IMX_KEYPAD 384 select IMX_HAVE_PLATFORM_IMX_SSI 385 select IMX_HAVE_PLATFORM_IMX_UART 386 select IMX_HAVE_PLATFORM_MX2_CAMERA 387 select IMX_HAVE_PLATFORM_MXC_EHCI 388 select IMX_HAVE_PLATFORM_MXC_MMC 389 select IMX_HAVE_PLATFORM_SPI_IMX 390 select MXC_DEBUG_BOARD 391 select MXC_ULPI if USB_ULPI 392 select SOC_IMX27 393 help 394 Include support for MX27PDK platform. This includes specific 395 configurations for the board and its peripherals. 396 397config MACH_IMX27_VISSTRIM_M10 398 bool "Vista Silicon i.MX27 Visstrim_m10" 399 select IMX_HAVE_PLATFORM_GPIO_KEYS 400 select IMX_HAVE_PLATFORM_IMX_I2C 401 select IMX_HAVE_PLATFORM_IMX_SSI 402 select IMX_HAVE_PLATFORM_IMX_UART 403 select IMX_HAVE_PLATFORM_MX2_CAMERA 404 select IMX_HAVE_PLATFORM_MX2_EMMA 405 select IMX_HAVE_PLATFORM_MXC_EHCI 406 select IMX_HAVE_PLATFORM_MXC_MMC 407 select LEDS_GPIO_REGISTER 408 select SOC_IMX27 409 help 410 Include support for Visstrim_m10 platform and its different variants. 411 This includes specific configurations for the board and its 412 peripherals. 413 414config MACH_IMX27LITE 415 bool "LogicPD MX27 LITEKIT platform" 416 select IMX_HAVE_PLATFORM_IMX_SSI 417 select IMX_HAVE_PLATFORM_IMX_UART 418 select SOC_IMX27 419 help 420 Include support for MX27 LITEKIT platform. This includes specific 421 configurations for the board and its peripherals. 422 423config MACH_PCA100 424 bool "Phytec phyCARD-s (pca100)" 425 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 426 select IMX_HAVE_PLATFORM_IMX2_WDT 427 select IMX_HAVE_PLATFORM_IMX_FB 428 select IMX_HAVE_PLATFORM_IMX_I2C 429 select IMX_HAVE_PLATFORM_IMX_SSI 430 select IMX_HAVE_PLATFORM_IMX_UART 431 select IMX_HAVE_PLATFORM_MXC_EHCI 432 select IMX_HAVE_PLATFORM_MXC_MMC 433 select IMX_HAVE_PLATFORM_MXC_NAND 434 select IMX_HAVE_PLATFORM_MXC_W1 435 select IMX_HAVE_PLATFORM_SPI_IMX 436 select MXC_ULPI if USB_ULPI 437 select SOC_IMX27 438 help 439 Include support for phyCARD-s (aka pca100) platform. This 440 includes specific configurations for the module and its peripherals. 441 442config MACH_MXT_TD60 443 bool "Maxtrack i-MXT TD60" 444 select IMX_HAVE_PLATFORM_IMX_FB 445 select IMX_HAVE_PLATFORM_IMX_I2C 446 select IMX_HAVE_PLATFORM_IMX_UART 447 select IMX_HAVE_PLATFORM_MXC_MMC 448 select IMX_HAVE_PLATFORM_MXC_NAND 449 select SOC_IMX27 450 help 451 Include support for i-MXT (aka td60) platform. This 452 includes specific configurations for the module and its peripherals. 453 454config MACH_IMX27IPCAM 455 bool "IMX27 IPCAM platform" 456 select IMX_HAVE_PLATFORM_IMX2_WDT 457 select IMX_HAVE_PLATFORM_IMX_UART 458 select SOC_IMX27 459 help 460 Include support for IMX27 IPCAM platform. This includes specific 461 configurations for the board and its peripherals. 462 463config MACH_IMX27_DT 464 bool "Support i.MX27 platforms from device tree" 465 select SOC_IMX27 466 help 467 Include support for Freescale i.MX27 based platforms 468 using the device tree for discovery 469 470endif 471 472if ARCH_MULTI_V6 473 474comment "MX31 platforms:" 475 476config MACH_MX31ADS 477 bool "Support MX31ADS platforms" 478 default y 479 select IMX_HAVE_PLATFORM_IMX_I2C 480 select IMX_HAVE_PLATFORM_IMX_SSI 481 select IMX_HAVE_PLATFORM_IMX_UART 482 select SOC_IMX31 483 help 484 Include support for MX31ADS platform. This includes specific 485 configurations for the board and its peripherals. 486 487config MACH_MX31ADS_WM1133_EV1 488 bool "Support Wolfson Microelectronics 1133-EV1 module" 489 depends on MACH_MX31ADS 490 depends on MFD_WM8350_I2C 491 depends on REGULATOR_WM8350 492 select MFD_WM8350_CONFIG_MODE_0 493 select MFD_WM8352_CONFIG_MODE_0 494 help 495 Include support for the Wolfson Microelectronics 1133-EV1 PMU 496 and audio module for the MX31ADS platform. 497 498config MACH_MX31LILLY 499 bool "Support MX31 LILLY-1131 platforms (INCO startec)" 500 select IMX_HAVE_PLATFORM_IMX_UART 501 select IMX_HAVE_PLATFORM_IPU_CORE 502 select IMX_HAVE_PLATFORM_MXC_EHCI 503 select IMX_HAVE_PLATFORM_MXC_MMC 504 select IMX_HAVE_PLATFORM_SPI_IMX 505 select MXC_ULPI if USB_ULPI 506 select SOC_IMX31 507 help 508 Include support for mx31 based LILLY1131 modules. This includes 509 specific configurations for the board and its peripherals. 510 511config MACH_MX31LITE 512 bool "Support MX31 LITEKIT (LogicPD)" 513 select IMX_HAVE_PLATFORM_IMX2_WDT 514 select IMX_HAVE_PLATFORM_IMX_UART 515 select IMX_HAVE_PLATFORM_MXC_EHCI 516 select IMX_HAVE_PLATFORM_MXC_MMC 517 select IMX_HAVE_PLATFORM_MXC_NAND 518 select IMX_HAVE_PLATFORM_MXC_RTC 519 select IMX_HAVE_PLATFORM_SPI_IMX 520 select LEDS_GPIO_REGISTER 521 select MXC_ULPI if USB_ULPI 522 select SOC_IMX31 523 help 524 Include support for MX31 LITEKIT platform. This includes specific 525 configurations for the board and its peripherals. 526 527config MACH_PCM037 528 bool "Support Phytec pcm037 (i.MX31) platforms" 529 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 530 select IMX_HAVE_PLATFORM_IMX2_WDT 531 select IMX_HAVE_PLATFORM_IMX_I2C 532 select IMX_HAVE_PLATFORM_IMX_UART 533 select IMX_HAVE_PLATFORM_IPU_CORE 534 select IMX_HAVE_PLATFORM_MXC_EHCI 535 select IMX_HAVE_PLATFORM_MXC_MMC 536 select IMX_HAVE_PLATFORM_MXC_NAND 537 select IMX_HAVE_PLATFORM_MXC_W1 538 select MXC_ULPI if USB_ULPI 539 select SOC_IMX31 540 help 541 Include support for Phytec pcm037 platform. This includes 542 specific configurations for the board and its peripherals. 543 544config MACH_PCM037_EET 545 bool "Support pcm037 EET board extensions" 546 depends on MACH_PCM037 547 select IMX_HAVE_PLATFORM_GPIO_KEYS 548 select IMX_HAVE_PLATFORM_SPI_IMX 549 help 550 Add support for PCM037 EET baseboard extensions. If you are using the 551 OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel 552 command-line parameter. 553 554config MACH_MX31_3DS 555 bool "Support MX31PDK (3DS)" 556 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 557 select IMX_HAVE_PLATFORM_IMX2_WDT 558 select IMX_HAVE_PLATFORM_IMX_I2C 559 select IMX_HAVE_PLATFORM_IMX_KEYPAD 560 select IMX_HAVE_PLATFORM_IMX_SSI 561 select IMX_HAVE_PLATFORM_IMX_UART 562 select IMX_HAVE_PLATFORM_IPU_CORE 563 select IMX_HAVE_PLATFORM_MXC_EHCI 564 select IMX_HAVE_PLATFORM_MXC_MMC 565 select IMX_HAVE_PLATFORM_MXC_NAND 566 select IMX_HAVE_PLATFORM_SPI_IMX 567 select MXC_DEBUG_BOARD 568 select MXC_ULPI if USB_ULPI 569 select SOC_IMX31 570 help 571 Include support for MX31PDK (3DS) platform. This includes specific 572 configurations for the board and its peripherals. 573 574config MACH_MX31_3DS_MXC_NAND_USE_BBT 575 bool "Make the MXC NAND driver use the in flash Bad Block Table" 576 depends on MACH_MX31_3DS 577 depends on MTD_NAND_MXC 578 help 579 Enable this if you want that the MXC NAND driver uses the in flash 580 Bad Block Table to know what blocks are bad instead of scanning the 581 entire flash looking for bad block markers. 582 583config MACH_MX31MOBOARD 584 bool "Support mx31moboard platforms (EPFL Mobots group)" 585 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 586 select IMX_HAVE_PLATFORM_IMX2_WDT 587 select IMX_HAVE_PLATFORM_IMX_I2C 588 select IMX_HAVE_PLATFORM_IMX_SSI 589 select IMX_HAVE_PLATFORM_IMX_UART 590 select IMX_HAVE_PLATFORM_IPU_CORE 591 select IMX_HAVE_PLATFORM_MXC_EHCI 592 select IMX_HAVE_PLATFORM_MXC_MMC 593 select IMX_HAVE_PLATFORM_SPI_IMX 594 select LEDS_GPIO_REGISTER 595 select MXC_ULPI if USB_ULPI 596 select SOC_IMX31 597 help 598 Include support for mx31moboard platform. This includes specific 599 configurations for the board and its peripherals. 600 601config MACH_QONG 602 bool "Support Dave/DENX QongEVB-LITE platform" 603 select IMX_HAVE_PLATFORM_IMX2_WDT 604 select IMX_HAVE_PLATFORM_IMX_UART 605 select SOC_IMX31 606 help 607 Include support for Dave/DENX QongEVB-LITE platform. This includes 608 specific configurations for the board and its peripherals. 609 610config MACH_ARMADILLO5X0 611 bool "Support Atmark Armadillo-500 Development Base Board" 612 select IMX_HAVE_PLATFORM_GPIO_KEYS 613 select IMX_HAVE_PLATFORM_IMX_I2C 614 select IMX_HAVE_PLATFORM_IMX_UART 615 select IMX_HAVE_PLATFORM_IPU_CORE 616 select IMX_HAVE_PLATFORM_MXC_EHCI 617 select IMX_HAVE_PLATFORM_MXC_MMC 618 select IMX_HAVE_PLATFORM_MXC_NAND 619 select MXC_ULPI if USB_ULPI 620 select SOC_IMX31 621 help 622 Include support for Atmark Armadillo-500 platform. This includes 623 specific configurations for the board and its peripherals. 624 625config MACH_KZM_ARM11_01 626 bool "Support KZM-ARM11-01(Kyoto Microcomputer)" 627 select IMX_HAVE_PLATFORM_IMX_UART 628 select SOC_IMX31 629 help 630 Include support for KZM-ARM11-01. This includes specific 631 configurations for the board and its peripherals. 632 633config MACH_BUG 634 bool "Support Buglabs BUGBase platform" 635 default y 636 select IMX_HAVE_PLATFORM_IMX_UART 637 select SOC_IMX31 638 help 639 Include support for BUGBase 1.3 platform. This includes specific 640 configurations for the board and its peripherals. 641 642config MACH_IMX31_DT 643 bool "Support i.MX31 platforms from device tree" 644 select SOC_IMX31 645 help 646 Include support for Freescale i.MX31 based platforms 647 using the device tree for discovery. 648 649comment "MX35 platforms:" 650 651config MACH_PCM043 652 bool "Support Phytec pcm043 (i.MX35) platforms" 653 select IMX_HAVE_PLATFORM_FLEXCAN 654 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 655 select IMX_HAVE_PLATFORM_IMX2_WDT 656 select IMX_HAVE_PLATFORM_IMX_I2C 657 select IMX_HAVE_PLATFORM_IMX_SSI 658 select IMX_HAVE_PLATFORM_IMX_UART 659 select IMX_HAVE_PLATFORM_IPU_CORE 660 select IMX_HAVE_PLATFORM_MXC_EHCI 661 select IMX_HAVE_PLATFORM_MXC_NAND 662 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 663 select MXC_ULPI if USB_ULPI 664 select SOC_IMX35 665 help 666 Include support for Phytec pcm043 platform. This includes 667 specific configurations for the board and its peripherals. 668 669config MACH_MX35_3DS 670 bool "Support MX35PDK platform" 671 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 672 select IMX_HAVE_PLATFORM_IMX2_WDT 673 select IMX_HAVE_PLATFORM_IMX_FB 674 select IMX_HAVE_PLATFORM_IMX_I2C 675 select IMX_HAVE_PLATFORM_IMX_UART 676 select IMX_HAVE_PLATFORM_IPU_CORE 677 select IMX_HAVE_PLATFORM_MXC_EHCI 678 select IMX_HAVE_PLATFORM_MXC_NAND 679 select IMX_HAVE_PLATFORM_MXC_RTC 680 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 681 select MXC_DEBUG_BOARD 682 select SOC_IMX35 683 help 684 Include support for MX35PDK platform. This includes specific 685 configurations for the board and its peripherals. 686 687config MACH_EUKREA_CPUIMX35SD 688 bool "Support Eukrea CPUIMX35 Platform" 689 select IMX_HAVE_PLATFORM_FLEXCAN 690 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 691 select IMX_HAVE_PLATFORM_IMX2_WDT 692 select IMX_HAVE_PLATFORM_IMX_I2C 693 select IMX_HAVE_PLATFORM_IMX_UART 694 select IMX_HAVE_PLATFORM_MXC_EHCI 695 select IMX_HAVE_PLATFORM_MXC_NAND 696 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 697 select MXC_ULPI if USB_ULPI 698 select SOC_IMX35 699 help 700 Include support for Eukrea CPUIMX35 platform. This includes 701 specific configurations for the board and its peripherals. 702 703choice 704 prompt "Baseboard" 705 depends on MACH_EUKREA_CPUIMX35SD 706 default MACH_EUKREA_MBIMXSD35_BASEBOARD 707 708config MACH_EUKREA_MBIMXSD35_BASEBOARD 709 bool "Eukrea MBIMXSD development board" 710 select IMX_HAVE_PLATFORM_GPIO_KEYS 711 select IMX_HAVE_PLATFORM_IMX_SSI 712 select IMX_HAVE_PLATFORM_IPU_CORE 713 select IMX_HAVE_PLATFORM_SPI_IMX 714 select LEDS_GPIO_REGISTER 715 help 716 This adds board specific devices that can be found on Eukrea's 717 MBIMXSD evaluation board. 718 719endchoice 720 721config MACH_VPR200 722 bool "Support VPR200 platform" 723 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 724 select IMX_HAVE_PLATFORM_GPIO_KEYS 725 select IMX_HAVE_PLATFORM_IMX2_WDT 726 select IMX_HAVE_PLATFORM_IMX_I2C 727 select IMX_HAVE_PLATFORM_IMX_UART 728 select IMX_HAVE_PLATFORM_IPU_CORE 729 select IMX_HAVE_PLATFORM_MXC_EHCI 730 select IMX_HAVE_PLATFORM_MXC_NAND 731 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 732 select SOC_IMX35 733 help 734 Include support for VPR200 platform. This includes specific 735 configurations for the board and its peripherals. 736 737endif 738 739if ARCH_MULTI_V7 740 741comment "i.MX5 platforms:" 742 743config MACH_MX50_RDP 744 bool "Support MX50 reference design platform" 745 depends on BROKEN 746 select IMX_HAVE_PLATFORM_IMX_I2C 747 select IMX_HAVE_PLATFORM_IMX_UART 748 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 749 select IMX_HAVE_PLATFORM_SPI_IMX 750 select SOC_IMX50 751 help 752 Include support for MX50 reference design platform (RDP) board. This 753 includes specific configurations for the board and its peripherals. 754 755comment "i.MX51 machines:" 756 757config MACH_IMX51_DT 758 bool "Support i.MX51 platforms from device tree" 759 select SOC_IMX51 760 help 761 Include support for Freescale i.MX51 based platforms 762 using the device tree for discovery 763 764config MACH_MX51_BABBAGE 765 bool "Support MX51 BABBAGE platforms" 766 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 767 select IMX_HAVE_PLATFORM_IMX2_WDT 768 select IMX_HAVE_PLATFORM_IMX_I2C 769 select IMX_HAVE_PLATFORM_IMX_UART 770 select IMX_HAVE_PLATFORM_MXC_EHCI 771 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 772 select IMX_HAVE_PLATFORM_SPI_IMX 773 select SOC_IMX51 774 help 775 Include support for MX51 Babbage platform, also known as MX51EVK in 776 u-boot. This includes specific configurations for the board and its 777 peripherals. 778 779config MACH_MX51_3DS 780 bool "Support MX51PDK (3DS)" 781 select IMX_HAVE_PLATFORM_IMX2_WDT 782 select IMX_HAVE_PLATFORM_IMX_KEYPAD 783 select IMX_HAVE_PLATFORM_IMX_UART 784 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 785 select IMX_HAVE_PLATFORM_SPI_IMX 786 select MXC_DEBUG_BOARD 787 select SOC_IMX51 788 help 789 Include support for MX51PDK (3DS) platform. This includes specific 790 configurations for the board and its peripherals. 791 792config MACH_EUKREA_CPUIMX51SD 793 bool "Support Eukrea CPUIMX51SD module" 794 select IMX_HAVE_PLATFORM_FSL_USB2_UDC 795 select IMX_HAVE_PLATFORM_IMX2_WDT 796 select IMX_HAVE_PLATFORM_IMX_I2C 797 select IMX_HAVE_PLATFORM_IMX_UART 798 select IMX_HAVE_PLATFORM_MXC_EHCI 799 select IMX_HAVE_PLATFORM_MXC_NAND 800 select IMX_HAVE_PLATFORM_SPI_IMX 801 select SOC_IMX51 802 help 803 Include support for Eukrea CPUIMX51SD platform. This includes 804 specific configurations for the module and its peripherals. 805 806choice 807 prompt "Baseboard" 808 depends on MACH_EUKREA_CPUIMX51SD 809 default MACH_EUKREA_MBIMXSD51_BASEBOARD 810 811config MACH_EUKREA_MBIMXSD51_BASEBOARD 812 prompt "Eukrea MBIMXSD development board" 813 bool 814 select IMX_HAVE_PLATFORM_IMX_SSI 815 select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX 816 select LEDS_GPIO_REGISTER 817 help 818 This adds board specific devices that can be found on Eukrea's 819 MBIMXSD evaluation board. 820 821endchoice 822 823comment "Device tree only" 824 825config SOC_IMX53 826 bool "i.MX53 support" 827 select ARCH_MX5 828 select ARCH_MX53 829 select HAVE_CAN_FLEXCAN if CAN 830 select IMX_HAVE_PLATFORM_IMX2_WDT 831 select PINCTRL 832 select PINCTRL_IMX53 833 select SOC_IMX5 834 835 help 836 This enables support for Freescale i.MX53 processor. 837 838config SOC_IMX6Q 839 bool "i.MX6 Quad support" 840 select ARCH_HAS_CPUFREQ 841 select ARCH_HAS_OPP 842 select ARM_CPU_SUSPEND if PM 843 select ARM_ERRATA_743622 844 select ARM_ERRATA_751472 845 select ARM_ERRATA_754322 846 select ARM_ERRATA_764369 if SMP 847 select ARM_ERRATA_775420 848 select ARM_GIC 849 select COMMON_CLK 850 select CPU_V7 851 select HAVE_ARM_SCU 852 select HAVE_CAN_FLEXCAN if CAN 853 select HAVE_IMX_GPC 854 select HAVE_IMX_MMDC 855 select HAVE_SMP 856 select MFD_SYSCON 857 select PINCTRL 858 select PINCTRL_IMX6Q 859 select PL310_ERRATA_588369 if CACHE_PL310 860 select PL310_ERRATA_727915 if CACHE_PL310 861 select PL310_ERRATA_769419 if CACHE_PL310 862 select PM_OPP if PM 863 864 help 865 This enables support for Freescale i.MX6 Quad processor. 866 867endif 868 869source "arch/arm/mach-imx/devices/Kconfig" 870 871endmenu 872