1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2014 Samsung Electronics Co., Ltd. 3 // http://www.samsung.com 4 // 5 // Based on arch/arm/mach-vexpress/dcscb.c 6 7 #include <linux/arm-cci.h> 8 #include <linux/delay.h> 9 #include <linux/io.h> 10 #include <linux/of_address.h> 11 #include <linux/syscore_ops.h> 12 #include <linux/soc/samsung/exynos-regs-pmu.h> 13 14 #include <asm/cputype.h> 15 #include <asm/cp15.h> 16 #include <asm/mcpm.h> 17 #include <asm/smp_plat.h> 18 19 #include "common.h" 20 21 #define EXYNOS5420_CPUS_PER_CLUSTER 4 22 #define EXYNOS5420_NR_CLUSTERS 2 23 24 #define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN BIT(9) 25 #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29) 26 #define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30) 27 28 static void __iomem *ns_sram_base_addr __ro_after_init; 29 30 /* 31 * The common v7_exit_coherency_flush API could not be used because of the 32 * Erratum 799270 workaround. This macro is the same as the common one (in 33 * arch/arm/include/asm/cacheflush.h) except for the erratum handling. 34 */ 35 #define exynos_v7_exit_coherency_flush(level) \ 36 asm volatile( \ 37 "stmfd sp!, {fp, ip}\n\t"\ 38 "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \ 39 "bic r0, r0, #"__stringify(CR_C)"\n\t" \ 40 "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ 41 "isb\n\t"\ 42 "bl v7_flush_dcache_"__stringify(level)"\n\t" \ 43 "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ 44 "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ 45 /* Dummy Load of a device register to avoid Erratum 799270 */ \ 46 "ldr r4, [%0]\n\t" \ 47 "and r4, r4, #0\n\t" \ 48 "orr r0, r0, r4\n\t" \ 49 "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \ 50 "isb\n\t" \ 51 "dsb\n\t" \ 52 "ldmfd sp!, {fp, ip}" \ 53 : \ 54 : "Ir" (pmu_base_addr + S5P_INFORM0) \ 55 : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ 56 "r9", "r10", "lr", "memory") 57 58 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) 59 { 60 unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); 61 62 pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); 63 if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER || 64 cluster >= EXYNOS5420_NR_CLUSTERS) 65 return -EINVAL; 66 67 if (!exynos_cpu_power_state(cpunr)) { 68 exynos_cpu_power_up(cpunr); 69 70 /* 71 * This assumes the cluster number of the big cores(Cortex A15) 72 * is 0 and the Little cores(Cortex A7) is 1. 73 * When the system was booted from the Little core, 74 * they should be reset during power up cpu. 75 */ 76 if (cluster && 77 cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) { 78 unsigned int timeout = 16; 79 80 /* 81 * Before we reset the Little cores, we should wait 82 * the SPARE2 register is set to 1 because the init 83 * codes of the iROM will set the register after 84 * initialization. 85 */ 86 while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { 87 timeout--; 88 udelay(10); 89 } 90 91 if (timeout == 0) { 92 pr_err("cpu %u cluster %u powerup failed\n", 93 cpu, cluster); 94 exynos_cpu_power_down(cpunr); 95 return -ETIMEDOUT; 96 } 97 98 pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu), 99 EXYNOS_SWRESET); 100 } 101 } 102 103 return 0; 104 } 105 106 static int exynos_cluster_powerup(unsigned int cluster) 107 { 108 pr_debug("%s: cluster %u\n", __func__, cluster); 109 if (cluster >= EXYNOS5420_NR_CLUSTERS) 110 return -EINVAL; 111 112 exynos_cluster_power_up(cluster); 113 return 0; 114 } 115 116 static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster) 117 { 118 unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); 119 120 pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); 121 BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || 122 cluster >= EXYNOS5420_NR_CLUSTERS); 123 exynos_cpu_power_down(cpunr); 124 } 125 126 static void exynos_cluster_powerdown_prepare(unsigned int cluster) 127 { 128 pr_debug("%s: cluster %u\n", __func__, cluster); 129 BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS); 130 exynos_cluster_power_down(cluster); 131 } 132 133 static void exynos_cpu_cache_disable(void) 134 { 135 /* Disable and flush the local CPU cache. */ 136 exynos_v7_exit_coherency_flush(louis); 137 } 138 139 static void exynos_cluster_cache_disable(void) 140 { 141 if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) { 142 /* 143 * On the Cortex-A15 we need to disable 144 * L2 prefetching before flushing the cache. 145 */ 146 asm volatile( 147 "mcr p15, 1, %0, c15, c0, 3\n\t" 148 "isb\n\t" 149 "dsb" 150 : : "r" (0x400)); 151 } 152 153 /* Flush all cache levels for this cluster. */ 154 exynos_v7_exit_coherency_flush(all); 155 156 /* 157 * Disable cluster-level coherency by masking 158 * incoming snoops and DVM messages: 159 */ 160 cci_disable_port_by_cpu(read_cpuid_mpidr()); 161 } 162 163 static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) 164 { 165 unsigned int tries = 100; 166 unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); 167 168 pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); 169 BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || 170 cluster >= EXYNOS5420_NR_CLUSTERS); 171 172 /* Wait for the core state to be OFF */ 173 while (tries--) { 174 if ((exynos_cpu_power_state(cpunr) == 0)) 175 return 0; /* success: the CPU is halted */ 176 177 /* Otherwise, wait and retry: */ 178 msleep(1); 179 } 180 181 return -ETIMEDOUT; /* timeout */ 182 } 183 184 static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster) 185 { 186 /* especially when resuming: make sure power control is set */ 187 exynos_cpu_powerup(cpu, cluster); 188 } 189 190 static const struct mcpm_platform_ops exynos_power_ops = { 191 .cpu_powerup = exynos_cpu_powerup, 192 .cluster_powerup = exynos_cluster_powerup, 193 .cpu_powerdown_prepare = exynos_cpu_powerdown_prepare, 194 .cluster_powerdown_prepare = exynos_cluster_powerdown_prepare, 195 .cpu_cache_disable = exynos_cpu_cache_disable, 196 .cluster_cache_disable = exynos_cluster_cache_disable, 197 .wait_for_powerdown = exynos_wait_for_powerdown, 198 .cpu_is_up = exynos_cpu_is_up, 199 }; 200 201 /* 202 * Enable cluster-level coherency, in preparation for turning on the MMU. 203 */ 204 static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) 205 { 206 asm volatile ("\n" 207 "cmp r0, #1\n" 208 "bxne lr\n" 209 "b cci_enable_port_for_self"); 210 } 211 212 static const struct of_device_id exynos_dt_mcpm_match[] = { 213 { .compatible = "samsung,exynos5420" }, 214 { .compatible = "samsung,exynos5800" }, 215 {}, 216 }; 217 218 static void exynos_mcpm_setup_entry_point(void) 219 { 220 /* 221 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr 222 * as part of secondary_cpu_start(). Let's redirect it to the 223 * mcpm_entry_point(). This is done during both secondary boot-up as 224 * well as system resume. 225 */ 226 __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */ 227 __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */ 228 __raw_writel(__pa_symbol(mcpm_entry_point), ns_sram_base_addr + 8); 229 } 230 231 static struct syscore_ops exynos_mcpm_syscore_ops = { 232 .resume = exynos_mcpm_setup_entry_point, 233 }; 234 235 static int __init exynos_mcpm_init(void) 236 { 237 struct device_node *node; 238 unsigned int value, i; 239 int ret; 240 241 node = of_find_matching_node(NULL, exynos_dt_mcpm_match); 242 if (!node) 243 return -ENODEV; 244 of_node_put(node); 245 246 if (!cci_probed()) 247 return -ENODEV; 248 249 node = of_find_compatible_node(NULL, NULL, 250 "samsung,exynos4210-sysram-ns"); 251 if (!node) 252 return -ENODEV; 253 254 ns_sram_base_addr = of_iomap(node, 0); 255 of_node_put(node); 256 if (!ns_sram_base_addr) { 257 pr_err("failed to map non-secure iRAM base address\n"); 258 return -ENOMEM; 259 } 260 261 /* 262 * To increase the stability of KFC reset we need to program 263 * the PMU SPARE3 register 264 */ 265 pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); 266 267 ret = mcpm_platform_register(&exynos_power_ops); 268 if (!ret) 269 ret = mcpm_sync_init(exynos_pm_power_up_setup); 270 if (!ret) 271 ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */ 272 if (ret) { 273 iounmap(ns_sram_base_addr); 274 return ret; 275 } 276 277 mcpm_smp_set_ops(); 278 279 pr_info("Exynos MCPM support installed\n"); 280 281 /* 282 * On Exynos5420/5800 for the A15 and A7 clusters: 283 * 284 * EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores 285 * in a cluster are turned off before turning off the cluster L2. 286 * 287 * EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered 288 * off before waking it up. 289 * 290 * EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be 291 * turned on before the first man is powered up. 292 */ 293 for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) { 294 value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i)); 295 value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN | 296 EXYNOS5420_USE_ARM_CORE_DOWN_STATE | 297 EXYNOS5420_USE_L2_COMMON_UP_STATE; 298 pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i)); 299 } 300 301 exynos_mcpm_setup_entry_point(); 302 303 register_syscore_ops(&exynos_mcpm_syscore_ops); 304 305 return ret; 306 } 307 308 early_initcall(exynos_mcpm_init); 309