1 /* 2 * arch/arm/mach-ep93xx/vision_ep9307.c 3 * Vision Engraving Systems EP9307 SoM support. 4 * 5 * Copyright (C) 2008-2011 Vision Engraving Systems 6 * H Hartley Sweeten <hsweeten@visionengravers.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or (at 11 * your option) any later version. 12 */ 13 14 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 15 16 #include <linux/kernel.h> 17 #include <linux/init.h> 18 #include <linux/platform_device.h> 19 #include <linux/irq.h> 20 #include <linux/gpio.h> 21 #include <linux/gpio/machine.h> 22 #include <linux/fb.h> 23 #include <linux/io.h> 24 #include <linux/mtd/partitions.h> 25 #include <linux/i2c.h> 26 #include <linux/platform_data/pca953x.h> 27 #include <linux/spi/spi.h> 28 #include <linux/spi/flash.h> 29 #include <linux/spi/mmc_spi.h> 30 #include <linux/mmc/host.h> 31 32 #include <sound/cs4271.h> 33 34 #include <mach/hardware.h> 35 #include <linux/platform_data/video-ep93xx.h> 36 #include <linux/platform_data/spi-ep93xx.h> 37 #include <mach/gpio-ep93xx.h> 38 39 #include <asm/mach-types.h> 40 #include <asm/mach/map.h> 41 #include <asm/mach/arch.h> 42 43 #include "soc.h" 44 45 /************************************************************************* 46 * Static I/O mappings for the FPGA 47 *************************************************************************/ 48 #define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE 49 #define VISION_VIRT_BASE 0xfebff000 50 51 static struct map_desc vision_io_desc[] __initdata = { 52 { 53 .virtual = VISION_VIRT_BASE, 54 .pfn = __phys_to_pfn(VISION_PHYS_BASE), 55 .length = SZ_4K, 56 .type = MT_DEVICE, 57 }, 58 }; 59 60 static void __init vision_map_io(void) 61 { 62 ep93xx_map_io(); 63 64 iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); 65 } 66 67 /************************************************************************* 68 * Ethernet 69 *************************************************************************/ 70 static struct ep93xx_eth_data vision_eth_data __initdata = { 71 .phy_id = 1, 72 }; 73 74 /************************************************************************* 75 * Framebuffer 76 *************************************************************************/ 77 #define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 78 79 static int vision_lcd_setup(struct platform_device *pdev) 80 { 81 int err; 82 83 err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, 84 dev_name(&pdev->dev)); 85 if (err) 86 return err; 87 88 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | 89 EP93XX_SYSCON_DEVCFG_RASONP3 | 90 EP93XX_SYSCON_DEVCFG_EXVC); 91 92 return 0; 93 } 94 95 static void vision_lcd_teardown(struct platform_device *pdev) 96 { 97 gpio_free(VISION_LCD_ENABLE); 98 } 99 100 static void vision_lcd_blank(int blank_mode, struct fb_info *info) 101 { 102 if (blank_mode) 103 gpio_set_value(VISION_LCD_ENABLE, 0); 104 else 105 gpio_set_value(VISION_LCD_ENABLE, 1); 106 } 107 108 static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { 109 .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, 110 .setup = vision_lcd_setup, 111 .teardown = vision_lcd_teardown, 112 .blank = vision_lcd_blank, 113 }; 114 115 116 /************************************************************************* 117 * GPIO Expanders 118 *************************************************************************/ 119 #define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) 120 #define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) 121 #define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) 122 #define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) 123 124 static struct pca953x_platform_data pca953x_74_gpio_data = { 125 .gpio_base = PCA9539_74_GPIO_BASE, 126 .irq_base = EP93XX_BOARD_IRQ(0), 127 }; 128 129 static struct pca953x_platform_data pca953x_75_gpio_data = { 130 .gpio_base = PCA9539_75_GPIO_BASE, 131 .irq_base = -1, 132 }; 133 134 static struct pca953x_platform_data pca953x_76_gpio_data = { 135 .gpio_base = PCA9539_76_GPIO_BASE, 136 .irq_base = -1, 137 }; 138 139 static struct pca953x_platform_data pca953x_77_gpio_data = { 140 .gpio_base = PCA9539_77_GPIO_BASE, 141 .irq_base = -1, 142 }; 143 144 /************************************************************************* 145 * I2C Bus 146 *************************************************************************/ 147 148 static struct i2c_board_info vision_i2c_info[] __initdata = { 149 { 150 I2C_BOARD_INFO("isl1208", 0x6f), 151 .irq = IRQ_EP93XX_EXT1, 152 }, { 153 I2C_BOARD_INFO("pca9539", 0x74), 154 .platform_data = &pca953x_74_gpio_data, 155 }, { 156 I2C_BOARD_INFO("pca9539", 0x75), 157 .platform_data = &pca953x_75_gpio_data, 158 }, { 159 I2C_BOARD_INFO("pca9539", 0x76), 160 .platform_data = &pca953x_76_gpio_data, 161 }, { 162 I2C_BOARD_INFO("pca9539", 0x77), 163 .platform_data = &pca953x_77_gpio_data, 164 }, 165 }; 166 167 /************************************************************************* 168 * SPI CS4271 Audio Codec 169 *************************************************************************/ 170 static struct cs4271_platform_data vision_cs4271_data = { 171 .gpio_nreset = EP93XX_GPIO_LINE_H(2), 172 }; 173 174 /************************************************************************* 175 * SPI Flash 176 *************************************************************************/ 177 static struct mtd_partition vision_spi_flash_partitions[] = { 178 { 179 .name = "SPI bootstrap", 180 .offset = 0, 181 .size = SZ_4K, 182 }, { 183 .name = "Bootstrap config", 184 .offset = MTDPART_OFS_APPEND, 185 .size = SZ_4K, 186 }, { 187 .name = "System config", 188 .offset = MTDPART_OFS_APPEND, 189 .size = MTDPART_SIZ_FULL, 190 }, 191 }; 192 193 static struct flash_platform_data vision_spi_flash_data = { 194 .name = "SPI Flash", 195 .parts = vision_spi_flash_partitions, 196 .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), 197 }; 198 199 /************************************************************************* 200 * SPI SD/MMC host 201 *************************************************************************/ 202 static struct mmc_spi_platform_data vision_spi_mmc_data = { 203 .detect_delay = 100, 204 .powerup_msecs = 100, 205 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, 206 .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, 207 }; 208 209 static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { 210 .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ 211 .table = { 212 /* Card detect */ 213 GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW), 214 /* Write protect */ 215 GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH), 216 { }, 217 }, 218 }; 219 220 /************************************************************************* 221 * SPI Bus 222 *************************************************************************/ 223 static struct spi_board_info vision_spi_board_info[] __initdata = { 224 { 225 .modalias = "cs4271", 226 .platform_data = &vision_cs4271_data, 227 .max_speed_hz = 6000000, 228 .bus_num = 0, 229 .chip_select = 0, 230 .mode = SPI_MODE_3, 231 }, { 232 .modalias = "sst25l", 233 .platform_data = &vision_spi_flash_data, 234 .max_speed_hz = 20000000, 235 .bus_num = 0, 236 .chip_select = 1, 237 .mode = SPI_MODE_3, 238 }, { 239 .modalias = "mmc_spi", 240 .platform_data = &vision_spi_mmc_data, 241 .max_speed_hz = 20000000, 242 .bus_num = 0, 243 .chip_select = 2, 244 .mode = SPI_MODE_3, 245 }, 246 }; 247 248 static int vision_spi_chipselects[] __initdata = { 249 EP93XX_GPIO_LINE_EGPIO6, 250 EP93XX_GPIO_LINE_EGPIO7, 251 EP93XX_GPIO_LINE_G(2), 252 }; 253 254 static struct ep93xx_spi_info vision_spi_master __initdata = { 255 .chipselect = vision_spi_chipselects, 256 .num_chipselect = ARRAY_SIZE(vision_spi_chipselects), 257 .use_dma = 1, 258 }; 259 260 /************************************************************************* 261 * I2S Audio 262 *************************************************************************/ 263 static struct platform_device vision_audio_device = { 264 .name = "edb93xx-audio", 265 .id = -1, 266 }; 267 268 static void __init vision_register_i2s(void) 269 { 270 ep93xx_register_i2s(); 271 platform_device_register(&vision_audio_device); 272 } 273 274 /************************************************************************* 275 * Machine Initialization 276 *************************************************************************/ 277 static void __init vision_init_machine(void) 278 { 279 ep93xx_init_devices(); 280 ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); 281 ep93xx_register_eth(&vision_eth_data, 1); 282 ep93xx_register_fb(&ep93xxfb_info); 283 ep93xx_register_pwm(1, 0); 284 285 /* 286 * Request the gpio expander's interrupt gpio line now to prevent 287 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). 288 */ 289 if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, 290 "pca9539:74")) 291 pr_warn("cannot request interrupt gpio for pca9539:74\n"); 292 293 vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); 294 295 ep93xx_register_i2c(vision_i2c_info, 296 ARRAY_SIZE(vision_i2c_info)); 297 gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); 298 ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, 299 ARRAY_SIZE(vision_spi_board_info)); 300 vision_register_i2s(); 301 } 302 303 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") 304 /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ 305 .atag_offset = 0x100, 306 .map_io = vision_map_io, 307 .init_irq = ep93xx_init_irq, 308 .init_time = ep93xx_timer_init, 309 .init_machine = vision_init_machine, 310 .init_late = ep93xx_init_late, 311 .restart = ep93xx_restart, 312 MACHINE_END 313