1# SPDX-License-Identifier: GPL-2.0 2 3menuconfig ARCH_DAVINCI 4 bool "TI DaVinci" 5 depends on ARCH_MULTI_V5 6 select DAVINCI_TIMER 7 select ZONE_DMA 8 select ARCH_HAS_HOLES_MEMORYMODEL 9 select PM_GENERIC_DOMAINS if PM 10 select PM_GENERIC_DOMAINS_OF if PM && OF 11 select REGMAP_MMIO 12 select RESET_CONTROLLER 13 select HAVE_IDE 14 select PINCTRL_SINGLE 15 16if ARCH_DAVINCI 17 18config ARCH_DAVINCI_DMx 19 bool 20 21comment "DaVinci Core Type" 22 23config ARCH_DAVINCI_DM644x 24 bool "DaVinci 644x based system" 25 select DAVINCI_AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM355 29 bool "DaVinci 355 based system" 30 select DAVINCI_AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DM646x 34 bool "DaVinci 646x based system" 35 select DAVINCI_AINTC 36 select ARCH_DAVINCI_DMx 37 38config ARCH_DAVINCI_DA830 39 bool "DA830/OMAP-L137/AM17x based system" 40 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 41 select ARCH_DAVINCI_DA8XX 42 # needed on silicon revs 1.0, 1.1: 43 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 44 select DAVINCI_CP_INTC 45 46config ARCH_DAVINCI_DA850 47 bool "DA850/OMAP-L138/AM18x based system" 48 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 49 select ARCH_DAVINCI_DA8XX 50 select DAVINCI_CP_INTC 51 52config ARCH_DAVINCI_DA8XX 53 bool 54 55config ARCH_DAVINCI_DM365 56 bool "DaVinci 365 based system" 57 select DAVINCI_AINTC 58 select ARCH_DAVINCI_DMx 59 60comment "DaVinci Board Type" 61 62config MACH_DA8XX_DT 63 bool "Support DA8XX platforms using device tree" 64 default y 65 depends on ARCH_DAVINCI_DA850 66 select PINCTRL 67 select TIMER_OF 68 help 69 Say y here to include support for TI DaVinci DA850 based using 70 Flattened Device Tree. More information at Documentation/devicetree 71 72config MACH_DAVINCI_EVM 73 bool "TI DM644x EVM" 74 default ARCH_DAVINCI_DM644x 75 depends on ARCH_DAVINCI_DM644x 76 help 77 Configure this option to specify the whether the board used 78 for development is a DM644x EVM 79 80config MACH_SFFSDR 81 bool "Lyrtech SFFSDR" 82 depends on ARCH_DAVINCI_DM644x 83 help 84 Say Y here to select the Lyrtech Small Form Factor 85 Software Defined Radio (SFFSDR) board. 86 87config MACH_NEUROS_OSD2 88 bool "Neuros OSD2 Open Television Set Top Box" 89 depends on ARCH_DAVINCI_DM644x 90 help 91 Configure this option to specify the whether the board used 92 for development is a Neuros OSD2 Open Set Top Box. 93 94config MACH_DAVINCI_DM355_EVM 95 bool "TI DM355 EVM" 96 default ARCH_DAVINCI_DM355 97 depends on ARCH_DAVINCI_DM355 98 help 99 Configure this option to specify the whether the board used 100 for development is a DM355 EVM 101 102config MACH_DM355_LEOPARD 103 bool "DM355 Leopard board" 104 depends on ARCH_DAVINCI_DM355 105 help 106 Configure this option to specify the whether the board used 107 for development is a DM355 Leopard board. 108 109config MACH_DAVINCI_DM6467_EVM 110 bool "TI DM6467 EVM" 111 default ARCH_DAVINCI_DM646x 112 depends on ARCH_DAVINCI_DM646x 113 select MACH_DAVINCI_DM6467TEVM 114 help 115 Configure this option to specify the whether the board used 116 for development is a DM6467 EVM 117 118config MACH_DAVINCI_DM6467TEVM 119 bool 120 121config MACH_DAVINCI_DM365_EVM 122 bool "TI DM365 EVM" 123 default ARCH_DAVINCI_DM365 124 depends on ARCH_DAVINCI_DM365 125 help 126 Configure this option to specify whether the board used 127 for development is a DM365 EVM 128 129config MACH_DAVINCI_DA830_EVM 130 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 131 default ARCH_DAVINCI_DA830 132 depends on ARCH_DAVINCI_DA830 133 select GPIO_PCF857X if I2C 134 help 135 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 136 137choice 138 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 139 depends on MACH_DAVINCI_DA830_EVM 140 help 141 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 142 detected automatically based on successful probe of the I2C 143 based GPIO expander on that board. This option selected in this 144 menu has an effect only in case of a successful UI card detection. 145 146config DA830_UI_LCD 147 bool "LCD" 148 help 149 Say Y here to use the LCD as a framebuffer or simple character 150 display. 151 152config DA830_UI_NAND 153 bool "NAND flash" 154 help 155 Say Y here to use the NAND flash. Do not forget to setup 156 the switch correctly. 157endchoice 158 159config MACH_DAVINCI_DA850_EVM 160 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 161 default ARCH_DAVINCI_DA850 162 depends on ARCH_DAVINCI_DA850 163 help 164 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 165 166choice 167 prompt "Select peripherals connected to expander on UI board" 168 depends on MACH_DAVINCI_DA850_EVM 169 help 170 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 171 EVM is detected automatically based on successful probe of the I2C 172 based GPIO expander on that card. This option selected in this 173 menu has an effect only in case of a successful UI card detection. 174 175config DA850_UI_NONE 176 bool "No peripheral is enabled" 177 help 178 Say Y if you do not want to enable any of the peripherals connected 179 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 180 181config DA850_UI_RMII 182 bool "RMII Ethernet PHY" 183 help 184 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 185 EVM. This PHY is found on the UI daughter card that is supplied with 186 the EVM. 187 NOTE: Please take care while choosing this option, MII PHY will 188 not be functional if RMII mode is selected. 189 190config DA850_UI_SD_VIDEO_PORT 191 bool "Video Port Interface" 192 help 193 Say Y if you want to use Video Port Interface (VPIF) on the 194 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 195 UI daughter card that is supplied with the EVM. 196 197endchoice 198 199config MACH_MITYOMAPL138 200 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 201 depends on ARCH_DAVINCI_DA850 202 help 203 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 204 System on Module. Information on this SoM may be found at 205 http://www.mitydsp.com 206 207config MACH_OMAPL138_HAWKBOARD 208 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 209 depends on ARCH_DAVINCI_DA850 210 help 211 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 212 Information of this board may be found at 213 http://www.hawkboard.org/ 214 215config DAVINCI_MUX 216 bool "DAVINCI multiplexing support" 217 depends on ARCH_DAVINCI 218 default y 219 help 220 Pin multiplexing support for DAVINCI boards. If your bootloader 221 sets the multiplexing correctly, say N. Otherwise, or if unsure, 222 say Y. 223 224config DAVINCI_MUX_DEBUG 225 bool "Multiplexing debug output" 226 depends on DAVINCI_MUX 227 help 228 Makes the multiplexing functions print out a lot of debug info. 229 This is useful if you want to find out the correct values of the 230 multiplexing registers. 231 232config DAVINCI_MUX_WARNINGS 233 bool "Warn about pins the bootloader didn't set up" 234 depends on DAVINCI_MUX 235 help 236 Choose Y here to warn whenever driver initialization logic needs 237 to change the pin multiplexing setup. When there are no warnings 238 printed, it's safe to deselect DAVINCI_MUX for your product. 239 240endif 241