1# SPDX-License-Identifier: GPL-2.0 2if ARCH_DAVINCI 3 4config AINTC 5 bool 6 7config CP_INTC 8 bool 9 select IRQ_DOMAIN 10 11config ARCH_DAVINCI_DMx 12 bool 13 14menu "TI DaVinci Implementations" 15 16comment "DaVinci Core Type" 17 18config ARCH_DAVINCI_DM644x 19 bool "DaVinci 644x based system" 20 select AINTC 21 select ARCH_DAVINCI_DMx 22 23config ARCH_DAVINCI_DM355 24 bool "DaVinci 355 based system" 25 select AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM646x 29 bool "DaVinci 646x based system" 30 select AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DA830 34 bool "DA830/OMAP-L137/AM17x based system" 35 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 36 select ARCH_DAVINCI_DA8XX 37 # needed on silicon revs 1.0, 1.1: 38 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 39 select CP_INTC 40 41config ARCH_DAVINCI_DA850 42 bool "DA850/OMAP-L138/AM18x based system" 43 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 44 select ARCH_DAVINCI_DA8XX 45 select CP_INTC 46 47config ARCH_DAVINCI_DA8XX 48 bool 49 50config ARCH_DAVINCI_DM365 51 bool "DaVinci 365 based system" 52 select AINTC 53 select ARCH_DAVINCI_DMx 54 55comment "DaVinci Board Type" 56 57config MACH_DA8XX_DT 58 bool "Support DA8XX platforms using device tree" 59 default y 60 depends on ARCH_DAVINCI_DA850 61 select PINCTRL 62 help 63 Say y here to include support for TI DaVinci DA850 based using 64 Flattened Device Tree. More information at Documentation/devicetree 65 66config MACH_DAVINCI_EVM 67 bool "TI DM644x EVM" 68 default ARCH_DAVINCI_DM644x 69 depends on ARCH_DAVINCI_DM644x 70 help 71 Configure this option to specify the whether the board used 72 for development is a DM644x EVM 73 74config MACH_SFFSDR 75 bool "Lyrtech SFFSDR" 76 depends on ARCH_DAVINCI_DM644x 77 help 78 Say Y here to select the Lyrtech Small Form Factor 79 Software Defined Radio (SFFSDR) board. 80 81config MACH_NEUROS_OSD2 82 bool "Neuros OSD2 Open Television Set Top Box" 83 depends on ARCH_DAVINCI_DM644x 84 help 85 Configure this option to specify the whether the board used 86 for development is a Neuros OSD2 Open Set Top Box. 87 88config MACH_DAVINCI_DM355_EVM 89 bool "TI DM355 EVM" 90 default ARCH_DAVINCI_DM355 91 depends on ARCH_DAVINCI_DM355 92 help 93 Configure this option to specify the whether the board used 94 for development is a DM355 EVM 95 96config MACH_DM355_LEOPARD 97 bool "DM355 Leopard board" 98 depends on ARCH_DAVINCI_DM355 99 help 100 Configure this option to specify the whether the board used 101 for development is a DM355 Leopard board. 102 103config MACH_DAVINCI_DM6467_EVM 104 bool "TI DM6467 EVM" 105 default ARCH_DAVINCI_DM646x 106 depends on ARCH_DAVINCI_DM646x 107 select MACH_DAVINCI_DM6467TEVM 108 help 109 Configure this option to specify the whether the board used 110 for development is a DM6467 EVM 111 112config MACH_DAVINCI_DM6467TEVM 113 bool 114 115config MACH_DAVINCI_DM365_EVM 116 bool "TI DM365 EVM" 117 default ARCH_DAVINCI_DM365 118 depends on ARCH_DAVINCI_DM365 119 help 120 Configure this option to specify whether the board used 121 for development is a DM365 EVM 122 123config MACH_DAVINCI_DA830_EVM 124 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 125 default ARCH_DAVINCI_DA830 126 depends on ARCH_DAVINCI_DA830 127 select GPIO_PCF857X if I2C 128 help 129 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 130 131choice 132 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 133 depends on MACH_DAVINCI_DA830_EVM 134 help 135 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 136 detected automatically based on successful probe of the I2C 137 based GPIO expander on that board. This option selected in this 138 menu has an effect only in case of a successful UI card detection. 139 140config DA830_UI_LCD 141 bool "LCD" 142 help 143 Say Y here to use the LCD as a framebuffer or simple character 144 display. 145 146config DA830_UI_NAND 147 bool "NAND flash" 148 help 149 Say Y here to use the NAND flash. Do not forget to setup 150 the switch correctly. 151endchoice 152 153config MACH_DAVINCI_DA850_EVM 154 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 155 default ARCH_DAVINCI_DA850 156 depends on ARCH_DAVINCI_DA850 157 help 158 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 159 160choice 161 prompt "Select peripherals connected to expander on UI board" 162 depends on MACH_DAVINCI_DA850_EVM 163 help 164 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 165 EVM is detected automatically based on successful probe of the I2C 166 based GPIO expander on that card. This option selected in this 167 menu has an effect only in case of a successful UI card detection. 168 169config DA850_UI_NONE 170 bool "No peripheral is enabled" 171 help 172 Say Y if you do not want to enable any of the peripherals connected 173 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 174 175config DA850_UI_RMII 176 bool "RMII Ethernet PHY" 177 help 178 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 179 EVM. This PHY is found on the UI daughter card that is supplied with 180 the EVM. 181 NOTE: Please take care while choosing this option, MII PHY will 182 not be functional if RMII mode is selected. 183 184config DA850_UI_SD_VIDEO_PORT 185 bool "Video Port Interface" 186 help 187 Say Y if you want to use Video Port Interface (VPIF) on the 188 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 189 UI daughter card that is supplied with the EVM. 190 191endchoice 192 193config MACH_MITYOMAPL138 194 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 195 depends on ARCH_DAVINCI_DA850 196 help 197 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 198 System on Module. Information on this SoM may be found at 199 http://www.mitydsp.com 200 201config MACH_OMAPL138_HAWKBOARD 202 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 203 depends on ARCH_DAVINCI_DA850 204 help 205 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 206 Information of this board may be found at 207 http://www.hawkboard.org/ 208 209config DAVINCI_MUX 210 bool "DAVINCI multiplexing support" 211 depends on ARCH_DAVINCI 212 default y 213 help 214 Pin multiplexing support for DAVINCI boards. If your bootloader 215 sets the multiplexing correctly, say N. Otherwise, or if unsure, 216 say Y. 217 218config DAVINCI_MUX_DEBUG 219 bool "Multiplexing debug output" 220 depends on DAVINCI_MUX 221 help 222 Makes the multiplexing functions print out a lot of debug info. 223 This is useful if you want to find out the correct values of the 224 multiplexing registers. 225 226config DAVINCI_MUX_WARNINGS 227 bool "Warn about pins the bootloader didn't set up" 228 depends on DAVINCI_MUX 229 help 230 Choose Y here to warn whenever driver initialization logic needs 231 to change the pin multiplexing setup. When there are no warnings 232 printed, it's safe to deselect DAVINCI_MUX for your product. 233 234config DAVINCI_RESET_CLOCKS 235 bool "Reset unused clocks during boot" 236 depends on ARCH_DAVINCI 237 help 238 Say Y if you want to reset unused clocks during boot. 239 This option saves power, but assumes all drivers are 240 using the clock framework. Broken drivers that do not 241 yet use clock framework may not work with this option. 242 If you are booting from another operating system, you 243 probably do not want this option enabled until your 244 device drivers work properly. 245 246endmenu 247 248endif 249