1# SPDX-License-Identifier: GPL-2.0 2if ARCH_DAVINCI 3 4config AINTC 5 bool 6 7config CP_INTC 8 bool 9 select IRQ_DOMAIN 10 11config ARCH_DAVINCI_DMx 12 bool 13 14menu "TI DaVinci Implementations" 15 16comment "DaVinci Core Type" 17 18config ARCH_DAVINCI_DM644x 19 bool "DaVinci 644x based system" 20 select AINTC 21 select ARCH_DAVINCI_DMx 22 23config ARCH_DAVINCI_DM355 24 bool "DaVinci 355 based system" 25 select AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM646x 29 bool "DaVinci 646x based system" 30 select AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DA830 34 bool "DA830/OMAP-L137/AM17x based system" 35 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 36 select ARCH_DAVINCI_DA8XX 37 # needed on silicon revs 1.0, 1.1: 38 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 39 select CP_INTC 40 41config ARCH_DAVINCI_DA850 42 bool "DA850/OMAP-L138/AM18x based system" 43 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 44 select ARCH_DAVINCI_DA8XX 45 select CP_INTC 46 47config ARCH_DAVINCI_DA8XX 48 bool 49 50config ARCH_DAVINCI_DM365 51 bool "DaVinci 365 based system" 52 select AINTC 53 select ARCH_DAVINCI_DMx 54 55comment "DaVinci Board Type" 56 57config MACH_DA8XX_DT 58 bool "Support DA8XX platforms using device tree" 59 default y 60 depends on ARCH_DAVINCI_DA850 61 select PINCTRL 62 select TIMER_OF 63 help 64 Say y here to include support for TI DaVinci DA850 based using 65 Flattened Device Tree. More information at Documentation/devicetree 66 67config MACH_DAVINCI_EVM 68 bool "TI DM644x EVM" 69 default ARCH_DAVINCI_DM644x 70 depends on ARCH_DAVINCI_DM644x 71 help 72 Configure this option to specify the whether the board used 73 for development is a DM644x EVM 74 75config MACH_SFFSDR 76 bool "Lyrtech SFFSDR" 77 depends on ARCH_DAVINCI_DM644x 78 help 79 Say Y here to select the Lyrtech Small Form Factor 80 Software Defined Radio (SFFSDR) board. 81 82config MACH_NEUROS_OSD2 83 bool "Neuros OSD2 Open Television Set Top Box" 84 depends on ARCH_DAVINCI_DM644x 85 help 86 Configure this option to specify the whether the board used 87 for development is a Neuros OSD2 Open Set Top Box. 88 89config MACH_DAVINCI_DM355_EVM 90 bool "TI DM355 EVM" 91 default ARCH_DAVINCI_DM355 92 depends on ARCH_DAVINCI_DM355 93 help 94 Configure this option to specify the whether the board used 95 for development is a DM355 EVM 96 97config MACH_DM355_LEOPARD 98 bool "DM355 Leopard board" 99 depends on ARCH_DAVINCI_DM355 100 help 101 Configure this option to specify the whether the board used 102 for development is a DM355 Leopard board. 103 104config MACH_DAVINCI_DM6467_EVM 105 bool "TI DM6467 EVM" 106 default ARCH_DAVINCI_DM646x 107 depends on ARCH_DAVINCI_DM646x 108 select MACH_DAVINCI_DM6467TEVM 109 help 110 Configure this option to specify the whether the board used 111 for development is a DM6467 EVM 112 113config MACH_DAVINCI_DM6467TEVM 114 bool 115 116config MACH_DAVINCI_DM365_EVM 117 bool "TI DM365 EVM" 118 default ARCH_DAVINCI_DM365 119 depends on ARCH_DAVINCI_DM365 120 help 121 Configure this option to specify whether the board used 122 for development is a DM365 EVM 123 124config MACH_DAVINCI_DA830_EVM 125 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 126 default ARCH_DAVINCI_DA830 127 depends on ARCH_DAVINCI_DA830 128 select GPIO_PCF857X if I2C 129 help 130 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 131 132choice 133 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 134 depends on MACH_DAVINCI_DA830_EVM 135 help 136 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 137 detected automatically based on successful probe of the I2C 138 based GPIO expander on that board. This option selected in this 139 menu has an effect only in case of a successful UI card detection. 140 141config DA830_UI_LCD 142 bool "LCD" 143 help 144 Say Y here to use the LCD as a framebuffer or simple character 145 display. 146 147config DA830_UI_NAND 148 bool "NAND flash" 149 help 150 Say Y here to use the NAND flash. Do not forget to setup 151 the switch correctly. 152endchoice 153 154config MACH_DAVINCI_DA850_EVM 155 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 156 default ARCH_DAVINCI_DA850 157 depends on ARCH_DAVINCI_DA850 158 help 159 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 160 161choice 162 prompt "Select peripherals connected to expander on UI board" 163 depends on MACH_DAVINCI_DA850_EVM 164 help 165 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 166 EVM is detected automatically based on successful probe of the I2C 167 based GPIO expander on that card. This option selected in this 168 menu has an effect only in case of a successful UI card detection. 169 170config DA850_UI_NONE 171 bool "No peripheral is enabled" 172 help 173 Say Y if you do not want to enable any of the peripherals connected 174 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 175 176config DA850_UI_RMII 177 bool "RMII Ethernet PHY" 178 help 179 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 180 EVM. This PHY is found on the UI daughter card that is supplied with 181 the EVM. 182 NOTE: Please take care while choosing this option, MII PHY will 183 not be functional if RMII mode is selected. 184 185config DA850_UI_SD_VIDEO_PORT 186 bool "Video Port Interface" 187 help 188 Say Y if you want to use Video Port Interface (VPIF) on the 189 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 190 UI daughter card that is supplied with the EVM. 191 192endchoice 193 194config MACH_MITYOMAPL138 195 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 196 depends on ARCH_DAVINCI_DA850 197 help 198 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 199 System on Module. Information on this SoM may be found at 200 http://www.mitydsp.com 201 202config MACH_OMAPL138_HAWKBOARD 203 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 204 depends on ARCH_DAVINCI_DA850 205 help 206 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 207 Information of this board may be found at 208 http://www.hawkboard.org/ 209 210config DAVINCI_MUX 211 bool "DAVINCI multiplexing support" 212 depends on ARCH_DAVINCI 213 default y 214 help 215 Pin multiplexing support for DAVINCI boards. If your bootloader 216 sets the multiplexing correctly, say N. Otherwise, or if unsure, 217 say Y. 218 219config DAVINCI_MUX_DEBUG 220 bool "Multiplexing debug output" 221 depends on DAVINCI_MUX 222 help 223 Makes the multiplexing functions print out a lot of debug info. 224 This is useful if you want to find out the correct values of the 225 multiplexing registers. 226 227config DAVINCI_MUX_WARNINGS 228 bool "Warn about pins the bootloader didn't set up" 229 depends on DAVINCI_MUX 230 help 231 Choose Y here to warn whenever driver initialization logic needs 232 to change the pin multiplexing setup. When there are no warnings 233 printed, it's safe to deselect DAVINCI_MUX for your product. 234 235endmenu 236 237endif 238