1if ARCH_DAVINCI 2 3config AINTC 4 bool 5 6config CP_INTC 7 bool 8 select IRQ_DOMAIN 9 10config ARCH_DAVINCI_DMx 11 bool 12 13menu "TI DaVinci Implementations" 14 15comment "DaVinci Core Type" 16 17config ARCH_DAVINCI_DM644x 18 bool "DaVinci 644x based system" 19 select AINTC 20 select ARCH_DAVINCI_DMx 21 22config ARCH_DAVINCI_DM355 23 bool "DaVinci 355 based system" 24 select AINTC 25 select ARCH_DAVINCI_DMx 26 27config ARCH_DAVINCI_DM646x 28 bool "DaVinci 646x based system" 29 select AINTC 30 select ARCH_DAVINCI_DMx 31 32config ARCH_DAVINCI_DA830 33 bool "DA830/OMAP-L137/AM17x based system" 34 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 35 select ARCH_DAVINCI_DA8XX 36 # needed on silicon revs 1.0, 1.1: 37 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 38 select CP_INTC 39 40config ARCH_DAVINCI_DA850 41 bool "DA850/OMAP-L138/AM18x based system" 42 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 43 select ARCH_DAVINCI_DA8XX 44 select CP_INTC 45 46config ARCH_DAVINCI_DA8XX 47 bool 48 49config ARCH_DAVINCI_DM365 50 bool "DaVinci 365 based system" 51 select AINTC 52 select ARCH_DAVINCI_DMx 53 54comment "DaVinci Board Type" 55 56config MACH_DA8XX_DT 57 bool "Support DA8XX platforms using device tree" 58 default y 59 depends on ARCH_DAVINCI_DA850 60 select PINCTRL 61 help 62 Say y here to include support for TI DaVinci DA850 based using 63 Flattened Device Tree. More information at Documentation/devicetree 64 65config MACH_DAVINCI_EVM 66 bool "TI DM644x EVM" 67 default ARCH_DAVINCI_DM644x 68 depends on ARCH_DAVINCI_DM644x 69 help 70 Configure this option to specify the whether the board used 71 for development is a DM644x EVM 72 73config MACH_SFFSDR 74 bool "Lyrtech SFFSDR" 75 depends on ARCH_DAVINCI_DM644x 76 help 77 Say Y here to select the Lyrtech Small Form Factor 78 Software Defined Radio (SFFSDR) board. 79 80config MACH_NEUROS_OSD2 81 bool "Neuros OSD2 Open Television Set Top Box" 82 depends on ARCH_DAVINCI_DM644x 83 help 84 Configure this option to specify the whether the board used 85 for development is a Neuros OSD2 Open Set Top Box. 86 87config MACH_DAVINCI_DM355_EVM 88 bool "TI DM355 EVM" 89 default ARCH_DAVINCI_DM355 90 depends on ARCH_DAVINCI_DM355 91 help 92 Configure this option to specify the whether the board used 93 for development is a DM355 EVM 94 95config MACH_DM355_LEOPARD 96 bool "DM355 Leopard board" 97 depends on ARCH_DAVINCI_DM355 98 help 99 Configure this option to specify the whether the board used 100 for development is a DM355 Leopard board. 101 102config MACH_DAVINCI_DM6467_EVM 103 bool "TI DM6467 EVM" 104 default ARCH_DAVINCI_DM646x 105 depends on ARCH_DAVINCI_DM646x 106 select MACH_DAVINCI_DM6467TEVM 107 help 108 Configure this option to specify the whether the board used 109 for development is a DM6467 EVM 110 111config MACH_DAVINCI_DM6467TEVM 112 bool 113 114config MACH_DAVINCI_DM365_EVM 115 bool "TI DM365 EVM" 116 default ARCH_DAVINCI_DM365 117 depends on ARCH_DAVINCI_DM365 118 help 119 Configure this option to specify whether the board used 120 for development is a DM365 EVM 121 122config MACH_DAVINCI_DA830_EVM 123 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 124 default ARCH_DAVINCI_DA830 125 depends on ARCH_DAVINCI_DA830 126 select GPIO_PCF857X if I2C 127 help 128 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 129 130choice 131 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 132 depends on MACH_DAVINCI_DA830_EVM 133 help 134 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 135 detected automatically based on successful probe of the I2C 136 based GPIO expander on that board. This option selected in this 137 menu has an effect only in case of a successful UI card detection. 138 139config DA830_UI_LCD 140 bool "LCD" 141 help 142 Say Y here to use the LCD as a framebuffer or simple character 143 display. 144 145config DA830_UI_NAND 146 bool "NAND flash" 147 help 148 Say Y here to use the NAND flash. Do not forget to setup 149 the switch correctly. 150endchoice 151 152config MACH_DAVINCI_DA850_EVM 153 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 154 default ARCH_DAVINCI_DA850 155 depends on ARCH_DAVINCI_DA850 156 help 157 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 158 159choice 160 prompt "Select peripherals connected to expander on UI board" 161 depends on MACH_DAVINCI_DA850_EVM 162 help 163 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 164 EVM is detected automatically based on successful probe of the I2C 165 based GPIO expander on that card. This option selected in this 166 menu has an effect only in case of a successful UI card detection. 167 168config DA850_UI_NONE 169 bool "No peripheral is enabled" 170 help 171 Say Y if you do not want to enable any of the peripherals connected 172 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 173 174config DA850_UI_RMII 175 bool "RMII Ethernet PHY" 176 help 177 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 178 EVM. This PHY is found on the UI daughter card that is supplied with 179 the EVM. 180 NOTE: Please take care while choosing this option, MII PHY will 181 not be functional if RMII mode is selected. 182 183config DA850_UI_SD_VIDEO_PORT 184 bool "Video Port Interface" 185 help 186 Say Y if you want to use Video Port Interface (VPIF) on the 187 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 188 UI daughter card that is supplied with the EVM. 189 190endchoice 191 192config MACH_MITYOMAPL138 193 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 194 depends on ARCH_DAVINCI_DA850 195 help 196 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 197 System on Module. Information on this SoM may be found at 198 http://www.mitydsp.com 199 200config MACH_OMAPL138_HAWKBOARD 201 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 202 depends on ARCH_DAVINCI_DA850 203 help 204 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 205 Information of this board may be found at 206 http://www.hawkboard.org/ 207 208config DAVINCI_MUX 209 bool "DAVINCI multiplexing support" 210 depends on ARCH_DAVINCI 211 default y 212 help 213 Pin multiplexing support for DAVINCI boards. If your bootloader 214 sets the multiplexing correctly, say N. Otherwise, or if unsure, 215 say Y. 216 217config DAVINCI_MUX_DEBUG 218 bool "Multiplexing debug output" 219 depends on DAVINCI_MUX 220 help 221 Makes the multiplexing functions print out a lot of debug info. 222 This is useful if you want to find out the correct values of the 223 multiplexing registers. 224 225config DAVINCI_MUX_WARNINGS 226 bool "Warn about pins the bootloader didn't set up" 227 depends on DAVINCI_MUX 228 help 229 Choose Y here to warn whenever driver initialization logic needs 230 to change the pin multiplexing setup. When there are no warnings 231 printed, it's safe to deselect DAVINCI_MUX for your product. 232 233config DAVINCI_RESET_CLOCKS 234 bool "Reset unused clocks during boot" 235 depends on ARCH_DAVINCI 236 help 237 Say Y if you want to reset unused clocks during boot. 238 This option saves power, but assumes all drivers are 239 using the clock framework. Broken drivers that do not 240 yet use clock framework may not work with this option. 241 If you are booting from another operating system, you 242 probably do not want this option enabled until your 243 device drivers work properly. 244 245endmenu 246 247endif 248