1# SPDX-License-Identifier: GPL-2.0 2 3menuconfig ARCH_DAVINCI 4 bool "TI DaVinci" 5 depends on ARCH_MULTI_V5 6 depends on CPU_LITTLE_ENDIAN 7 select DAVINCI_TIMER 8 select ZONE_DMA 9 select PM_GENERIC_DOMAINS if PM 10 select PM_GENERIC_DOMAINS_OF if PM && OF 11 select REGMAP_MMIO 12 select RESET_CONTROLLER 13 select PINCTRL_SINGLE 14 15if ARCH_DAVINCI 16 17config ARCH_DAVINCI_DMx 18 bool 19 20comment "DaVinci Core Type" 21 22config ARCH_DAVINCI_DM644x 23 bool "DaVinci 644x based system" 24 select DAVINCI_AINTC 25 select ARCH_DAVINCI_DMx 26 27config ARCH_DAVINCI_DM355 28 bool "DaVinci 355 based system" 29 select DAVINCI_AINTC 30 select ARCH_DAVINCI_DMx 31 32config ARCH_DAVINCI_DM646x 33 bool "DaVinci 646x based system" 34 select DAVINCI_AINTC 35 select ARCH_DAVINCI_DMx 36 37config ARCH_DAVINCI_DA830 38 bool "DA830/OMAP-L137/AM17x based system" 39 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 40 select ARCH_DAVINCI_DA8XX 41 # needed on silicon revs 1.0, 1.1: 42 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 43 select DAVINCI_CP_INTC 44 45config ARCH_DAVINCI_DA850 46 bool "DA850/OMAP-L138/AM18x based system" 47 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 48 select ARCH_DAVINCI_DA8XX 49 select DAVINCI_CP_INTC 50 51config ARCH_DAVINCI_DA8XX 52 bool 53 54config ARCH_DAVINCI_DM365 55 bool "DaVinci 365 based system" 56 select DAVINCI_AINTC 57 select ARCH_DAVINCI_DMx 58 59comment "DaVinci Board Type" 60 61config MACH_DA8XX_DT 62 bool "Support DA8XX platforms using device tree" 63 default y 64 depends on ARCH_DAVINCI_DA850 65 select PINCTRL 66 help 67 Say y here to include support for TI DaVinci DA850 based using 68 Flattened Device Tree. More information at Documentation/devicetree 69 70config MACH_DAVINCI_EVM 71 bool "TI DM644x EVM" 72 default ARCH_DAVINCI_DM644x 73 depends on ARCH_DAVINCI_DM644x 74 help 75 Configure this option to specify the whether the board used 76 for development is a DM644x EVM 77 78config MACH_SFFSDR 79 bool "Lyrtech SFFSDR" 80 depends on ARCH_DAVINCI_DM644x 81 help 82 Say Y here to select the Lyrtech Small Form Factor 83 Software Defined Radio (SFFSDR) board. 84 85config MACH_NEUROS_OSD2 86 bool "Neuros OSD2 Open Television Set Top Box" 87 depends on ARCH_DAVINCI_DM644x 88 help 89 Configure this option to specify the whether the board used 90 for development is a Neuros OSD2 Open Set Top Box. 91 92config MACH_DAVINCI_DM355_EVM 93 bool "TI DM355 EVM" 94 default ARCH_DAVINCI_DM355 95 depends on ARCH_DAVINCI_DM355 96 help 97 Configure this option to specify the whether the board used 98 for development is a DM355 EVM 99 100config MACH_DM355_LEOPARD 101 bool "DM355 Leopard board" 102 depends on ARCH_DAVINCI_DM355 103 help 104 Configure this option to specify the whether the board used 105 for development is a DM355 Leopard board. 106 107config MACH_DAVINCI_DM6467_EVM 108 bool "TI DM6467 EVM" 109 default ARCH_DAVINCI_DM646x 110 depends on ARCH_DAVINCI_DM646x 111 select MACH_DAVINCI_DM6467TEVM 112 help 113 Configure this option to specify the whether the board used 114 for development is a DM6467 EVM 115 116config MACH_DAVINCI_DM6467TEVM 117 bool 118 119config MACH_DAVINCI_DM365_EVM 120 bool "TI DM365 EVM" 121 default ARCH_DAVINCI_DM365 122 depends on ARCH_DAVINCI_DM365 123 help 124 Configure this option to specify whether the board used 125 for development is a DM365 EVM 126 127config MACH_DAVINCI_DA830_EVM 128 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 129 default ARCH_DAVINCI_DA830 130 depends on ARCH_DAVINCI_DA830 131 select GPIO_PCF857X if I2C 132 help 133 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 134 135choice 136 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 137 depends on MACH_DAVINCI_DA830_EVM 138 help 139 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 140 detected automatically based on successful probe of the I2C 141 based GPIO expander on that board. This option selected in this 142 menu has an effect only in case of a successful UI card detection. 143 144config DA830_UI_LCD 145 bool "LCD" 146 help 147 Say Y here to use the LCD as a framebuffer or simple character 148 display. 149 150config DA830_UI_NAND 151 bool "NAND flash" 152 help 153 Say Y here to use the NAND flash. Do not forget to setup 154 the switch correctly. 155endchoice 156 157config MACH_DAVINCI_DA850_EVM 158 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 159 default ARCH_DAVINCI_DA850 160 depends on ARCH_DAVINCI_DA850 161 help 162 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 163 164choice 165 prompt "Select peripherals connected to expander on UI board" 166 depends on MACH_DAVINCI_DA850_EVM 167 help 168 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 169 EVM is detected automatically based on successful probe of the I2C 170 based GPIO expander on that card. This option selected in this 171 menu has an effect only in case of a successful UI card detection. 172 173config DA850_UI_NONE 174 bool "No peripheral is enabled" 175 help 176 Say Y if you do not want to enable any of the peripherals connected 177 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 178 179config DA850_UI_RMII 180 bool "RMII Ethernet PHY" 181 help 182 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 183 EVM. This PHY is found on the UI daughter card that is supplied with 184 the EVM. 185 NOTE: Please take care while choosing this option, MII PHY will 186 not be functional if RMII mode is selected. 187 188config DA850_UI_SD_VIDEO_PORT 189 bool "Video Port Interface" 190 help 191 Say Y if you want to use Video Port Interface (VPIF) on the 192 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 193 UI daughter card that is supplied with the EVM. 194 195endchoice 196 197config MACH_MITYOMAPL138 198 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 199 depends on ARCH_DAVINCI_DA850 200 help 201 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 202 System on Module. Information on this SoM may be found at 203 https://www.mitydsp.com 204 205config MACH_OMAPL138_HAWKBOARD 206 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 207 depends on ARCH_DAVINCI_DA850 208 help 209 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 210 211config DAVINCI_MUX 212 bool "DAVINCI multiplexing support" 213 depends on ARCH_DAVINCI 214 default y 215 help 216 Pin multiplexing support for DAVINCI boards. If your bootloader 217 sets the multiplexing correctly, say N. Otherwise, or if unsure, 218 say Y. 219 220config DAVINCI_MUX_DEBUG 221 bool "Multiplexing debug output" 222 depends on DAVINCI_MUX 223 help 224 Makes the multiplexing functions print out a lot of debug info. 225 This is useful if you want to find out the correct values of the 226 multiplexing registers. 227 228config DAVINCI_MUX_WARNINGS 229 bool "Warn about pins the bootloader didn't set up" 230 depends on DAVINCI_MUX 231 help 232 Choose Y here to warn whenever driver initialization logic needs 233 to change the pin multiplexing setup. When there are no warnings 234 printed, it's safe to deselect DAVINCI_MUX for your product. 235 236endif 237