1# SPDX-License-Identifier: GPL-2.0 2 3menuconfig ARCH_DAVINCI 4 bool "TI DaVinci" 5 depends on ARCH_MULTI_V5 6 select DAVINCI_TIMER 7 select ZONE_DMA 8 select ARCH_HAS_HOLES_MEMORYMODEL 9 select PM_GENERIC_DOMAINS if PM 10 select PM_GENERIC_DOMAINS_OF if PM && OF 11 select REGMAP_MMIO 12 select RESET_CONTROLLER 13 select HAVE_IDE 14 select PINCTRL_SINGLE 15 16if ARCH_DAVINCI 17 18config ARCH_DAVINCI_DMx 19 bool 20 21comment "DaVinci Core Type" 22 23config ARCH_DAVINCI_DM644x 24 bool "DaVinci 644x based system" 25 select DAVINCI_AINTC 26 select ARCH_DAVINCI_DMx 27 28config ARCH_DAVINCI_DM355 29 bool "DaVinci 355 based system" 30 select DAVINCI_AINTC 31 select ARCH_DAVINCI_DMx 32 33config ARCH_DAVINCI_DM646x 34 bool "DaVinci 646x based system" 35 select DAVINCI_AINTC 36 select ARCH_DAVINCI_DMx 37 38config ARCH_DAVINCI_DA830 39 bool "DA830/OMAP-L137/AM17x based system" 40 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 41 select ARCH_DAVINCI_DA8XX 42 # needed on silicon revs 1.0, 1.1: 43 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 44 select DAVINCI_CP_INTC 45 46config ARCH_DAVINCI_DA850 47 bool "DA850/OMAP-L138/AM18x based system" 48 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 49 select ARCH_DAVINCI_DA8XX 50 select DAVINCI_CP_INTC 51 52config ARCH_DAVINCI_DA8XX 53 bool 54 55config ARCH_DAVINCI_DM365 56 bool "DaVinci 365 based system" 57 select DAVINCI_AINTC 58 select ARCH_DAVINCI_DMx 59 60comment "DaVinci Board Type" 61 62config MACH_DA8XX_DT 63 bool "Support DA8XX platforms using device tree" 64 default y 65 depends on ARCH_DAVINCI_DA850 66 select PINCTRL 67 help 68 Say y here to include support for TI DaVinci DA850 based using 69 Flattened Device Tree. More information at Documentation/devicetree 70 71config MACH_DAVINCI_EVM 72 bool "TI DM644x EVM" 73 default ARCH_DAVINCI_DM644x 74 depends on ARCH_DAVINCI_DM644x 75 help 76 Configure this option to specify the whether the board used 77 for development is a DM644x EVM 78 79config MACH_SFFSDR 80 bool "Lyrtech SFFSDR" 81 depends on ARCH_DAVINCI_DM644x 82 help 83 Say Y here to select the Lyrtech Small Form Factor 84 Software Defined Radio (SFFSDR) board. 85 86config MACH_NEUROS_OSD2 87 bool "Neuros OSD2 Open Television Set Top Box" 88 depends on ARCH_DAVINCI_DM644x 89 help 90 Configure this option to specify the whether the board used 91 for development is a Neuros OSD2 Open Set Top Box. 92 93config MACH_DAVINCI_DM355_EVM 94 bool "TI DM355 EVM" 95 default ARCH_DAVINCI_DM355 96 depends on ARCH_DAVINCI_DM355 97 help 98 Configure this option to specify the whether the board used 99 for development is a DM355 EVM 100 101config MACH_DM355_LEOPARD 102 bool "DM355 Leopard board" 103 depends on ARCH_DAVINCI_DM355 104 help 105 Configure this option to specify the whether the board used 106 for development is a DM355 Leopard board. 107 108config MACH_DAVINCI_DM6467_EVM 109 bool "TI DM6467 EVM" 110 default ARCH_DAVINCI_DM646x 111 depends on ARCH_DAVINCI_DM646x 112 select MACH_DAVINCI_DM6467TEVM 113 help 114 Configure this option to specify the whether the board used 115 for development is a DM6467 EVM 116 117config MACH_DAVINCI_DM6467TEVM 118 bool 119 120config MACH_DAVINCI_DM365_EVM 121 bool "TI DM365 EVM" 122 default ARCH_DAVINCI_DM365 123 depends on ARCH_DAVINCI_DM365 124 help 125 Configure this option to specify whether the board used 126 for development is a DM365 EVM 127 128config MACH_DAVINCI_DA830_EVM 129 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 130 default ARCH_DAVINCI_DA830 131 depends on ARCH_DAVINCI_DA830 132 select GPIO_PCF857X if I2C 133 help 134 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 135 136choice 137 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 138 depends on MACH_DAVINCI_DA830_EVM 139 help 140 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 141 detected automatically based on successful probe of the I2C 142 based GPIO expander on that board. This option selected in this 143 menu has an effect only in case of a successful UI card detection. 144 145config DA830_UI_LCD 146 bool "LCD" 147 help 148 Say Y here to use the LCD as a framebuffer or simple character 149 display. 150 151config DA830_UI_NAND 152 bool "NAND flash" 153 help 154 Say Y here to use the NAND flash. Do not forget to setup 155 the switch correctly. 156endchoice 157 158config MACH_DAVINCI_DA850_EVM 159 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 160 default ARCH_DAVINCI_DA850 161 depends on ARCH_DAVINCI_DA850 162 help 163 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 164 165choice 166 prompt "Select peripherals connected to expander on UI board" 167 depends on MACH_DAVINCI_DA850_EVM 168 help 169 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 170 EVM is detected automatically based on successful probe of the I2C 171 based GPIO expander on that card. This option selected in this 172 menu has an effect only in case of a successful UI card detection. 173 174config DA850_UI_NONE 175 bool "No peripheral is enabled" 176 help 177 Say Y if you do not want to enable any of the peripherals connected 178 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 179 180config DA850_UI_RMII 181 bool "RMII Ethernet PHY" 182 help 183 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 184 EVM. This PHY is found on the UI daughter card that is supplied with 185 the EVM. 186 NOTE: Please take care while choosing this option, MII PHY will 187 not be functional if RMII mode is selected. 188 189config DA850_UI_SD_VIDEO_PORT 190 bool "Video Port Interface" 191 help 192 Say Y if you want to use Video Port Interface (VPIF) on the 193 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 194 UI daughter card that is supplied with the EVM. 195 196endchoice 197 198config MACH_MITYOMAPL138 199 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 200 depends on ARCH_DAVINCI_DA850 201 help 202 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 203 System on Module. Information on this SoM may be found at 204 https://www.mitydsp.com 205 206config MACH_OMAPL138_HAWKBOARD 207 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 208 depends on ARCH_DAVINCI_DA850 209 help 210 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 211 212config DAVINCI_MUX 213 bool "DAVINCI multiplexing support" 214 depends on ARCH_DAVINCI 215 default y 216 help 217 Pin multiplexing support for DAVINCI boards. If your bootloader 218 sets the multiplexing correctly, say N. Otherwise, or if unsure, 219 say Y. 220 221config DAVINCI_MUX_DEBUG 222 bool "Multiplexing debug output" 223 depends on DAVINCI_MUX 224 help 225 Makes the multiplexing functions print out a lot of debug info. 226 This is useful if you want to find out the correct values of the 227 multiplexing registers. 228 229config DAVINCI_MUX_WARNINGS 230 bool "Warn about pins the bootloader didn't set up" 231 depends on DAVINCI_MUX 232 help 233 Choose Y here to warn whenever driver initialization logic needs 234 to change the pin multiplexing setup. When there are no warnings 235 printed, it's safe to deselect DAVINCI_MUX for your product. 236 237endif 238