1# SPDX-License-Identifier: GPL-2.0 2 3menuconfig ARCH_DAVINCI 4 bool "TI DaVinci" 5 depends on ARCH_MULTI_V5 6 select DAVINCI_TIMER 7 select ZONE_DMA 8 select PM_GENERIC_DOMAINS if PM 9 select PM_GENERIC_DOMAINS_OF if PM && OF 10 select REGMAP_MMIO 11 select RESET_CONTROLLER 12 select PINCTRL_SINGLE 13 14if ARCH_DAVINCI 15 16config ARCH_DAVINCI_DMx 17 bool 18 19comment "DaVinci Core Type" 20 21config ARCH_DAVINCI_DM644x 22 bool "DaVinci 644x based system" 23 select DAVINCI_AINTC 24 select ARCH_DAVINCI_DMx 25 26config ARCH_DAVINCI_DM355 27 bool "DaVinci 355 based system" 28 select DAVINCI_AINTC 29 select ARCH_DAVINCI_DMx 30 31config ARCH_DAVINCI_DM646x 32 bool "DaVinci 646x based system" 33 select DAVINCI_AINTC 34 select ARCH_DAVINCI_DMx 35 36config ARCH_DAVINCI_DA830 37 bool "DA830/OMAP-L137/AM17x based system" 38 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 39 select ARCH_DAVINCI_DA8XX 40 # needed on silicon revs 1.0, 1.1: 41 select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE 42 select DAVINCI_CP_INTC 43 44config ARCH_DAVINCI_DA850 45 bool "DA850/OMAP-L138/AM18x based system" 46 depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) 47 select ARCH_DAVINCI_DA8XX 48 select DAVINCI_CP_INTC 49 50config ARCH_DAVINCI_DA8XX 51 bool 52 53config ARCH_DAVINCI_DM365 54 bool "DaVinci 365 based system" 55 select DAVINCI_AINTC 56 select ARCH_DAVINCI_DMx 57 58comment "DaVinci Board Type" 59 60config MACH_DA8XX_DT 61 bool "Support DA8XX platforms using device tree" 62 default y 63 depends on ARCH_DAVINCI_DA850 64 select PINCTRL 65 help 66 Say y here to include support for TI DaVinci DA850 based using 67 Flattened Device Tree. More information at Documentation/devicetree 68 69config MACH_DAVINCI_EVM 70 bool "TI DM644x EVM" 71 default ARCH_DAVINCI_DM644x 72 depends on ARCH_DAVINCI_DM644x 73 help 74 Configure this option to specify the whether the board used 75 for development is a DM644x EVM 76 77config MACH_SFFSDR 78 bool "Lyrtech SFFSDR" 79 depends on ARCH_DAVINCI_DM644x 80 help 81 Say Y here to select the Lyrtech Small Form Factor 82 Software Defined Radio (SFFSDR) board. 83 84config MACH_NEUROS_OSD2 85 bool "Neuros OSD2 Open Television Set Top Box" 86 depends on ARCH_DAVINCI_DM644x 87 help 88 Configure this option to specify the whether the board used 89 for development is a Neuros OSD2 Open Set Top Box. 90 91config MACH_DAVINCI_DM355_EVM 92 bool "TI DM355 EVM" 93 default ARCH_DAVINCI_DM355 94 depends on ARCH_DAVINCI_DM355 95 help 96 Configure this option to specify the whether the board used 97 for development is a DM355 EVM 98 99config MACH_DM355_LEOPARD 100 bool "DM355 Leopard board" 101 depends on ARCH_DAVINCI_DM355 102 help 103 Configure this option to specify the whether the board used 104 for development is a DM355 Leopard board. 105 106config MACH_DAVINCI_DM6467_EVM 107 bool "TI DM6467 EVM" 108 default ARCH_DAVINCI_DM646x 109 depends on ARCH_DAVINCI_DM646x 110 select MACH_DAVINCI_DM6467TEVM 111 help 112 Configure this option to specify the whether the board used 113 for development is a DM6467 EVM 114 115config MACH_DAVINCI_DM6467TEVM 116 bool 117 118config MACH_DAVINCI_DM365_EVM 119 bool "TI DM365 EVM" 120 default ARCH_DAVINCI_DM365 121 depends on ARCH_DAVINCI_DM365 122 help 123 Configure this option to specify whether the board used 124 for development is a DM365 EVM 125 126config MACH_DAVINCI_DA830_EVM 127 bool "TI DA830/OMAP-L137/AM17x Reference Platform" 128 default ARCH_DAVINCI_DA830 129 depends on ARCH_DAVINCI_DA830 130 select GPIO_PCF857X if I2C 131 help 132 Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. 133 134choice 135 prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" 136 depends on MACH_DAVINCI_DA830_EVM 137 help 138 The presence of UI card on the DA830/OMAP-L137/AM17x EVM is 139 detected automatically based on successful probe of the I2C 140 based GPIO expander on that board. This option selected in this 141 menu has an effect only in case of a successful UI card detection. 142 143config DA830_UI_LCD 144 bool "LCD" 145 help 146 Say Y here to use the LCD as a framebuffer or simple character 147 display. 148 149config DA830_UI_NAND 150 bool "NAND flash" 151 help 152 Say Y here to use the NAND flash. Do not forget to setup 153 the switch correctly. 154endchoice 155 156config MACH_DAVINCI_DA850_EVM 157 bool "TI DA850/OMAP-L138/AM18x Reference Platform" 158 default ARCH_DAVINCI_DA850 159 depends on ARCH_DAVINCI_DA850 160 help 161 Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. 162 163choice 164 prompt "Select peripherals connected to expander on UI board" 165 depends on MACH_DAVINCI_DA850_EVM 166 help 167 The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x 168 EVM is detected automatically based on successful probe of the I2C 169 based GPIO expander on that card. This option selected in this 170 menu has an effect only in case of a successful UI card detection. 171 172config DA850_UI_NONE 173 bool "No peripheral is enabled" 174 help 175 Say Y if you do not want to enable any of the peripherals connected 176 to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card 177 178config DA850_UI_RMII 179 bool "RMII Ethernet PHY" 180 help 181 Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x 182 EVM. This PHY is found on the UI daughter card that is supplied with 183 the EVM. 184 NOTE: Please take care while choosing this option, MII PHY will 185 not be functional if RMII mode is selected. 186 187config DA850_UI_SD_VIDEO_PORT 188 bool "Video Port Interface" 189 help 190 Say Y if you want to use Video Port Interface (VPIF) on the 191 DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the 192 UI daughter card that is supplied with the EVM. 193 194endchoice 195 196config MACH_MITYOMAPL138 197 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" 198 depends on ARCH_DAVINCI_DA850 199 help 200 Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 201 System on Module. Information on this SoM may be found at 202 https://www.mitydsp.com 203 204config MACH_OMAPL138_HAWKBOARD 205 bool "TI AM1808 / OMAPL-138 Hawkboard platform" 206 depends on ARCH_DAVINCI_DA850 207 help 208 Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . 209 210config DAVINCI_MUX 211 bool "DAVINCI multiplexing support" 212 depends on ARCH_DAVINCI 213 default y 214 help 215 Pin multiplexing support for DAVINCI boards. If your bootloader 216 sets the multiplexing correctly, say N. Otherwise, or if unsure, 217 say Y. 218 219config DAVINCI_MUX_DEBUG 220 bool "Multiplexing debug output" 221 depends on DAVINCI_MUX 222 help 223 Makes the multiplexing functions print out a lot of debug info. 224 This is useful if you want to find out the correct values of the 225 multiplexing registers. 226 227config DAVINCI_MUX_WARNINGS 228 bool "Warn about pins the bootloader didn't set up" 229 depends on DAVINCI_MUX 230 help 231 Choose Y here to warn whenever driver initialization logic needs 232 to change the pin multiplexing setup. When there are no warnings 233 printed, it's safe to deselect DAVINCI_MUX for your product. 234 235endif 236