xref: /openbmc/linux/arch/arm/mach-at91/pm.c (revision df0e68c1)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * arch/arm/mach-at91/pm.c
4  * AT91 Power Management
5  *
6  * Copyright (C) 2005 David Brownell
7  */
8 
9 #include <linux/genalloc.h>
10 #include <linux/io.h>
11 #include <linux/of_address.h>
12 #include <linux/of.h>
13 #include <linux/of_fdt.h>
14 #include <linux/of_platform.h>
15 #include <linux/parser.h>
16 #include <linux/suspend.h>
17 
18 #include <linux/clk/at91_pmc.h>
19 #include <linux/platform_data/atmel.h>
20 
21 #include <soc/at91/pm.h>
22 
23 #include <asm/cacheflush.h>
24 #include <asm/fncpy.h>
25 #include <asm/system_misc.h>
26 #include <asm/suspend.h>
27 
28 #include "generic.h"
29 #include "pm.h"
30 
31 #define BACKUP_DDR_PHY_CALIBRATION	(9)
32 
33 /**
34  * struct at91_pm_bu - AT91 power management backup unit data structure
35  * @suspended: true if suspended to backup mode
36  * @reserved: reserved
37  * @canary: canary data for memory checking after exit from backup mode
38  * @resume: resume API
39  * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
40  * of the memory
41  */
42 struct at91_pm_bu {
43 	int suspended;
44 	unsigned long reserved;
45 	phys_addr_t canary;
46 	phys_addr_t resume;
47 	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
48 };
49 
50 /*
51  * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
52  * @pswbu: power switch BU control registers
53  */
54 struct at91_pm_sfrbu_regs {
55 	struct {
56 		u32 key;
57 		u32 ctrl;
58 		u32 state;
59 		u32 softsw;
60 	} pswbu;
61 };
62 
63 /**
64  * struct at91_soc_pm - AT91 SoC power management data structure
65  * @config_shdwc_ws: wakeup sources configuration function for SHDWC
66  * @config_pmc_ws: wakeup srouces configuration function for PMC
67  * @ws_ids: wakup sources of_device_id array
68  * @data: PM data to be used on last phase of suspend
69  * @sfrbu_regs: SFRBU registers mapping
70  * @bu: backup unit mapped data (for backup mode)
71  * @memcs: memory chip select
72  */
73 struct at91_soc_pm {
74 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
75 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
76 	const struct of_device_id *ws_ids;
77 	struct at91_pm_bu *bu;
78 	struct at91_pm_data data;
79 	struct at91_pm_sfrbu_regs sfrbu_regs;
80 	void *memcs;
81 };
82 
83 /**
84  * enum at91_pm_iomaps:	IOs that needs to be mapped for different PM modes
85  * @AT91_PM_IOMAP_SHDWC:	SHDWC controller
86  * @AT91_PM_IOMAP_SFRBU:	SFRBU controller
87  */
88 enum at91_pm_iomaps {
89 	AT91_PM_IOMAP_SHDWC,
90 	AT91_PM_IOMAP_SFRBU,
91 };
92 
93 #define AT91_PM_IOMAP(name)	BIT(AT91_PM_IOMAP_##name)
94 
95 static struct at91_soc_pm soc_pm = {
96 	.data = {
97 		.standby_mode = AT91_PM_STANDBY,
98 		.suspend_mode = AT91_PM_ULP0,
99 	},
100 };
101 
102 static const match_table_t pm_modes __initconst = {
103 	{ AT91_PM_STANDBY,	"standby" },
104 	{ AT91_PM_ULP0,		"ulp0" },
105 	{ AT91_PM_ULP0_FAST,    "ulp0-fast" },
106 	{ AT91_PM_ULP1,		"ulp1" },
107 	{ AT91_PM_BACKUP,	"backup" },
108 	{ -1, NULL },
109 };
110 
111 #define at91_ramc_read(id, field) \
112 	__raw_readl(soc_pm.data.ramc[id] + field)
113 
114 #define at91_ramc_write(id, field, value) \
115 	__raw_writel(value, soc_pm.data.ramc[id] + field)
116 
117 static int at91_pm_valid_state(suspend_state_t state)
118 {
119 	switch (state) {
120 		case PM_SUSPEND_ON:
121 		case PM_SUSPEND_STANDBY:
122 		case PM_SUSPEND_MEM:
123 			return 1;
124 
125 		default:
126 			return 0;
127 	}
128 }
129 
130 static int canary = 0xA5A5A5A5;
131 
132 struct wakeup_source_info {
133 	unsigned int pmc_fsmr_bit;
134 	unsigned int shdwc_mr_bit;
135 	bool set_polarity;
136 };
137 
138 static const struct wakeup_source_info ws_info[] = {
139 	{ .pmc_fsmr_bit = AT91_PMC_FSTT(10),	.set_polarity = true },
140 	{ .pmc_fsmr_bit = AT91_PMC_RTCAL,	.shdwc_mr_bit = BIT(17) },
141 	{ .pmc_fsmr_bit = AT91_PMC_USBAL },
142 	{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
143 	{ .pmc_fsmr_bit = AT91_PMC_RTTAL },
144 	{ .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
145 };
146 
147 static const struct of_device_id sama5d2_ws_ids[] = {
148 	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
149 	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
150 	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
151 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
152 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
153 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
154 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
155 	{ .compatible = "atmel,sama5d2-sdhci",		.data = &ws_info[3] },
156 	{ /* sentinel */ }
157 };
158 
159 static const struct of_device_id sam9x60_ws_ids[] = {
160 	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
161 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
162 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
163 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
164 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
165 	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
166 	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
167 	{ /* sentinel */ }
168 };
169 
170 static const struct of_device_id sama7g5_ws_ids[] = {
171 	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
172 	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
173 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
174 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
175 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
176 	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
177 	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
178 	{ /* sentinel */ }
179 };
180 
181 static int at91_pm_config_ws(unsigned int pm_mode, bool set)
182 {
183 	const struct wakeup_source_info *wsi;
184 	const struct of_device_id *match;
185 	struct platform_device *pdev;
186 	struct device_node *np;
187 	unsigned int mode = 0, polarity = 0, val = 0;
188 
189 	if (pm_mode != AT91_PM_ULP1)
190 		return 0;
191 
192 	if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
193 		return -EPERM;
194 
195 	if (!set) {
196 		writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
197 		return 0;
198 	}
199 
200 	if (soc_pm.config_shdwc_ws)
201 		soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
202 
203 	/* SHDWC.MR */
204 	val = readl(soc_pm.data.shdwc + 0x04);
205 
206 	/* Loop through defined wakeup sources. */
207 	for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
208 		pdev = of_find_device_by_node(np);
209 		if (!pdev)
210 			continue;
211 
212 		if (device_may_wakeup(&pdev->dev)) {
213 			wsi = match->data;
214 
215 			/* Check if enabled on SHDWC. */
216 			if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
217 				goto put_device;
218 
219 			mode |= wsi->pmc_fsmr_bit;
220 			if (wsi->set_polarity)
221 				polarity |= wsi->pmc_fsmr_bit;
222 		}
223 
224 put_device:
225 		put_device(&pdev->dev);
226 	}
227 
228 	if (mode) {
229 		if (soc_pm.config_pmc_ws)
230 			soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
231 	} else {
232 		pr_err("AT91: PM: no ULP1 wakeup sources found!");
233 	}
234 
235 	return mode ? 0 : -EPERM;
236 }
237 
238 static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
239 					u32 *polarity)
240 {
241 	u32 val;
242 
243 	/* SHDWC.WUIR */
244 	val = readl(shdwc + 0x0c);
245 	*mode |= (val & 0x3ff);
246 	*polarity |= ((val >> 16) & 0x3ff);
247 
248 	return 0;
249 }
250 
251 static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
252 {
253 	writel(mode, pmc + AT91_PMC_FSMR);
254 	writel(polarity, pmc + AT91_PMC_FSPR);
255 
256 	return 0;
257 }
258 
259 static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
260 {
261 	writel(mode, pmc + AT91_PMC_FSMR);
262 
263 	return 0;
264 }
265 
266 /*
267  * Called after processes are frozen, but before we shutdown devices.
268  */
269 static int at91_pm_begin(suspend_state_t state)
270 {
271 	int ret;
272 
273 	switch (state) {
274 	case PM_SUSPEND_MEM:
275 		soc_pm.data.mode = soc_pm.data.suspend_mode;
276 		break;
277 
278 	case PM_SUSPEND_STANDBY:
279 		soc_pm.data.mode = soc_pm.data.standby_mode;
280 		break;
281 
282 	default:
283 		soc_pm.data.mode = -1;
284 	}
285 
286 	ret = at91_pm_config_ws(soc_pm.data.mode, true);
287 	if (ret)
288 		return ret;
289 
290 	if (soc_pm.data.mode == AT91_PM_BACKUP)
291 		soc_pm.bu->suspended = 1;
292 	else if (soc_pm.bu)
293 		soc_pm.bu->suspended = 0;
294 
295 	return 0;
296 }
297 
298 /*
299  * Verify that all the clocks are correct before entering
300  * slow-clock mode.
301  */
302 static int at91_pm_verify_clocks(void)
303 {
304 	unsigned long scsr;
305 	int i;
306 
307 	scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
308 
309 	/* USB must not be using PLLB */
310 	if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
311 		pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
312 		return 0;
313 	}
314 
315 	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
316 	for (i = 0; i < 4; i++) {
317 		u32 css;
318 
319 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
320 			continue;
321 		css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
322 		if (css != AT91_PMC_CSS_SLOW) {
323 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
324 			return 0;
325 		}
326 	}
327 
328 	return 1;
329 }
330 
331 /*
332  * Call this from platform driver suspend() to see how deeply to suspend.
333  * For example, some controllers (like OHCI) need one of the PLL clocks
334  * in order to act as a wakeup source, and those are not available when
335  * going into slow clock mode.
336  *
337  * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
338  * the very same problem (but not using at91 main_clk), and it'd be better
339  * to add one generic API rather than lots of platform-specific ones.
340  */
341 int at91_suspend_entering_slow_clock(void)
342 {
343 	return (soc_pm.data.mode >= AT91_PM_ULP0);
344 }
345 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
346 
347 static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
348 extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
349 extern u32 at91_pm_suspend_in_sram_sz;
350 
351 static int at91_suspend_finish(unsigned long val)
352 {
353 	int i;
354 
355 	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
356 		/*
357 		 * The 1st 8 words of memory might get corrupted in the process
358 		 * of DDR PHY recalibration; it is saved here in securam and it
359 		 * will be restored later, after recalibration, by bootloader
360 		 */
361 		for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
362 			soc_pm.bu->ddr_phy_calibration[i] =
363 				*((unsigned int *)soc_pm.memcs + (i - 1));
364 	}
365 
366 	flush_cache_all();
367 	outer_disable();
368 
369 	at91_suspend_sram_fn(&soc_pm.data);
370 
371 	return 0;
372 }
373 
374 static void at91_pm_switch_ba_to_vbat(void)
375 {
376 	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
377 	unsigned int val;
378 
379 	/* Just for safety. */
380 	if (!soc_pm.data.sfrbu)
381 		return;
382 
383 	val = readl(soc_pm.data.sfrbu + offset);
384 
385 	/* Already on VBAT. */
386 	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
387 		return;
388 
389 	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
390 	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
391 	writel(val, soc_pm.data.sfrbu + offset);
392 
393 	/* Wait for update. */
394 	val = readl(soc_pm.data.sfrbu + offset);
395 	while (val & soc_pm.sfrbu_regs.pswbu.state)
396 		val = readl(soc_pm.data.sfrbu + offset);
397 }
398 
399 static void at91_pm_suspend(suspend_state_t state)
400 {
401 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
402 		at91_pm_switch_ba_to_vbat();
403 
404 		cpu_suspend(0, at91_suspend_finish);
405 
406 		/* The SRAM is lost between suspend cycles */
407 		at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
408 					     &at91_pm_suspend_in_sram,
409 					     at91_pm_suspend_in_sram_sz);
410 	} else {
411 		at91_suspend_finish(0);
412 	}
413 
414 	outer_resume();
415 }
416 
417 /*
418  * STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup'
419  * event sources; and reduces DRAM power.  But otherwise it's identical to
420  * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
421  *
422  * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
423  * suspend more deeply, the master clock switches to the clk32k and turns off
424  * the main oscillator
425  *
426  * AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh
427  */
428 static int at91_pm_enter(suspend_state_t state)
429 {
430 #ifdef CONFIG_PINCTRL_AT91
431 	/*
432 	 * FIXME: this is needed to communicate between the pinctrl driver and
433 	 * the PM implementation in the machine. Possibly part of the PM
434 	 * implementation should be moved down into the pinctrl driver and get
435 	 * called as part of the generic suspend/resume path.
436 	 */
437 	at91_pinctrl_gpio_suspend();
438 #endif
439 
440 	switch (state) {
441 	case PM_SUSPEND_MEM:
442 	case PM_SUSPEND_STANDBY:
443 		/*
444 		 * Ensure that clocks are in a valid state.
445 		 */
446 		if (soc_pm.data.mode >= AT91_PM_ULP0 &&
447 		    !at91_pm_verify_clocks())
448 			goto error;
449 
450 		at91_pm_suspend(state);
451 
452 		break;
453 
454 	case PM_SUSPEND_ON:
455 		cpu_do_idle();
456 		break;
457 
458 	default:
459 		pr_debug("AT91: PM - bogus suspend state %d\n", state);
460 		goto error;
461 	}
462 
463 error:
464 #ifdef CONFIG_PINCTRL_AT91
465 	at91_pinctrl_gpio_resume();
466 #endif
467 	return 0;
468 }
469 
470 /*
471  * Called right prior to thawing processes.
472  */
473 static void at91_pm_end(void)
474 {
475 	at91_pm_config_ws(soc_pm.data.mode, false);
476 }
477 
478 
479 static const struct platform_suspend_ops at91_pm_ops = {
480 	.valid	= at91_pm_valid_state,
481 	.begin	= at91_pm_begin,
482 	.enter	= at91_pm_enter,
483 	.end	= at91_pm_end,
484 };
485 
486 static struct platform_device at91_cpuidle_device = {
487 	.name = "cpuidle-at91",
488 };
489 
490 /*
491  * The AT91RM9200 goes into self-refresh mode with this command, and will
492  * terminate self-refresh automatically on the next SDRAM access.
493  *
494  * Self-refresh mode is exited as soon as a memory access is made, but we don't
495  * know for sure when that happens. However, we need to restore the low-power
496  * mode if it was enabled before going idle. Restoring low-power mode while
497  * still in self-refresh is "not recommended", but seems to work.
498  */
499 static void at91rm9200_standby(void)
500 {
501 	asm volatile(
502 		"b    1f\n\t"
503 		".align    5\n\t"
504 		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
505 		"    str    %2, [%1, %3]\n\t"
506 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
507 		:
508 		: "r" (0), "r" (soc_pm.data.ramc[0]),
509 		  "r" (1), "r" (AT91_MC_SDRAMC_SRR));
510 }
511 
512 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
513  * remember.
514  */
515 static void at91_ddr_standby(void)
516 {
517 	/* Those two values allow us to delay self-refresh activation
518 	 * to the maximum. */
519 	u32 lpr0, lpr1 = 0;
520 	u32 mdr, saved_mdr0, saved_mdr1 = 0;
521 	u32 saved_lpr0, saved_lpr1 = 0;
522 
523 	/* LPDDR1 --> force DDR2 mode during self-refresh */
524 	saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
525 	if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
526 		mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
527 		mdr |= AT91_DDRSDRC_MD_DDR2;
528 		at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
529 	}
530 
531 	if (soc_pm.data.ramc[1]) {
532 		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
533 		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
534 		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
535 		saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
536 		if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
537 			mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
538 			mdr |= AT91_DDRSDRC_MD_DDR2;
539 			at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
540 		}
541 	}
542 
543 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
544 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
545 	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
546 
547 	/* self-refresh mode now */
548 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
549 	if (soc_pm.data.ramc[1])
550 		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
551 
552 	cpu_do_idle();
553 
554 	at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
555 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
556 	if (soc_pm.data.ramc[1]) {
557 		at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
558 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
559 	}
560 }
561 
562 static void sama5d3_ddr_standby(void)
563 {
564 	u32 lpr0;
565 	u32 saved_lpr0;
566 
567 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
568 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
569 	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
570 
571 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
572 
573 	cpu_do_idle();
574 
575 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
576 }
577 
578 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
579  * remember.
580  */
581 static void at91sam9_sdram_standby(void)
582 {
583 	u32 lpr0, lpr1 = 0;
584 	u32 saved_lpr0, saved_lpr1 = 0;
585 
586 	if (soc_pm.data.ramc[1]) {
587 		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
588 		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
589 		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
590 	}
591 
592 	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
593 	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
594 	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
595 
596 	/* self-refresh mode now */
597 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
598 	if (soc_pm.data.ramc[1])
599 		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
600 
601 	cpu_do_idle();
602 
603 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
604 	if (soc_pm.data.ramc[1])
605 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
606 }
607 
608 struct ramc_info {
609 	void (*idle)(void);
610 	unsigned int memctrl;
611 };
612 
613 static const struct ramc_info ramc_infos[] __initconst = {
614 	{ .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
615 	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
616 	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
617 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
618 };
619 
620 static const struct of_device_id ramc_ids[] __initconst = {
621 	{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
622 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
623 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
624 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
625 	{ .compatible = "microchip,sama7g5-uddrc", },
626 	{ /*sentinel*/ }
627 };
628 
629 static const struct of_device_id ramc_phy_ids[] __initconst = {
630 	{ .compatible = "microchip,sama7g5-ddr3phy", },
631 	{ /* Sentinel. */ },
632 };
633 
634 static __init int at91_dt_ramc(bool phy_mandatory)
635 {
636 	struct device_node *np;
637 	const struct of_device_id *of_id;
638 	int idx = 0;
639 	void *standby = NULL;
640 	const struct ramc_info *ramc;
641 	int ret;
642 
643 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
644 		soc_pm.data.ramc[idx] = of_iomap(np, 0);
645 		if (!soc_pm.data.ramc[idx]) {
646 			pr_err("unable to map ramc[%d] cpu registers\n", idx);
647 			ret = -ENOMEM;
648 			goto unmap_ramc;
649 		}
650 
651 		ramc = of_id->data;
652 		if (ramc) {
653 			if (!standby)
654 				standby = ramc->idle;
655 			soc_pm.data.memctrl = ramc->memctrl;
656 		}
657 
658 		idx++;
659 	}
660 
661 	if (!idx) {
662 		pr_err("unable to find compatible ram controller node in dtb\n");
663 		ret = -ENODEV;
664 		goto unmap_ramc;
665 	}
666 
667 	/* Lookup for DDR PHY node, if any. */
668 	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
669 		soc_pm.data.ramc_phy = of_iomap(np, 0);
670 		if (!soc_pm.data.ramc_phy) {
671 			pr_err("unable to map ramc phy cpu registers\n");
672 			ret = -ENOMEM;
673 			goto unmap_ramc;
674 		}
675 	}
676 
677 	if (phy_mandatory && !soc_pm.data.ramc_phy) {
678 		pr_err("DDR PHY is mandatory!\n");
679 		ret = -ENODEV;
680 		goto unmap_ramc;
681 	}
682 
683 	if (!standby) {
684 		pr_warn("ramc no standby function available\n");
685 		return 0;
686 	}
687 
688 	at91_cpuidle_device.dev.platform_data = standby;
689 
690 	return 0;
691 
692 unmap_ramc:
693 	while (idx)
694 		iounmap(soc_pm.data.ramc[--idx]);
695 
696 	return ret;
697 }
698 
699 static void at91rm9200_idle(void)
700 {
701 	/*
702 	 * Disable the processor clock.  The processor will be automatically
703 	 * re-enabled by an interrupt or by a reset.
704 	 */
705 	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
706 }
707 
708 static void at91sam9_idle(void)
709 {
710 	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
711 	cpu_do_idle();
712 }
713 
714 static void __init at91_pm_sram_init(void)
715 {
716 	struct gen_pool *sram_pool;
717 	phys_addr_t sram_pbase;
718 	unsigned long sram_base;
719 	struct device_node *node;
720 	struct platform_device *pdev = NULL;
721 
722 	for_each_compatible_node(node, NULL, "mmio-sram") {
723 		pdev = of_find_device_by_node(node);
724 		if (pdev) {
725 			of_node_put(node);
726 			break;
727 		}
728 	}
729 
730 	if (!pdev) {
731 		pr_warn("%s: failed to find sram device!\n", __func__);
732 		return;
733 	}
734 
735 	sram_pool = gen_pool_get(&pdev->dev, NULL);
736 	if (!sram_pool) {
737 		pr_warn("%s: sram pool unavailable!\n", __func__);
738 		goto out_put_device;
739 	}
740 
741 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
742 	if (!sram_base) {
743 		pr_warn("%s: unable to alloc sram!\n", __func__);
744 		goto out_put_device;
745 	}
746 
747 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
748 	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
749 					at91_pm_suspend_in_sram_sz, false);
750 	if (!at91_suspend_sram_fn) {
751 		pr_warn("SRAM: Could not map\n");
752 		goto out_put_device;
753 	}
754 
755 	/* Copy the pm suspend handler to SRAM */
756 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
757 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
758 	return;
759 
760 out_put_device:
761 	put_device(&pdev->dev);
762 	return;
763 }
764 
765 static bool __init at91_is_pm_mode_active(int pm_mode)
766 {
767 	return (soc_pm.data.standby_mode == pm_mode ||
768 		soc_pm.data.suspend_mode == pm_mode);
769 }
770 
771 static int __init at91_pm_backup_scan_memcs(unsigned long node,
772 					    const char *uname, int depth,
773 					    void *data)
774 {
775 	const char *type;
776 	const __be32 *reg;
777 	int *located = data;
778 	int size;
779 
780 	/* Memory node already located. */
781 	if (*located)
782 		return 0;
783 
784 	type = of_get_flat_dt_prop(node, "device_type", NULL);
785 
786 	/* We are scanning "memory" nodes only. */
787 	if (!type || strcmp(type, "memory"))
788 		return 0;
789 
790 	reg = of_get_flat_dt_prop(node, "reg", &size);
791 	if (reg) {
792 		soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
793 		*located = 1;
794 	}
795 
796 	return 0;
797 }
798 
799 static int __init at91_pm_backup_init(void)
800 {
801 	struct gen_pool *sram_pool;
802 	struct device_node *np;
803 	struct platform_device *pdev;
804 	int ret = -ENODEV, located = 0;
805 
806 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
807 	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
808 		return -EPERM;
809 
810 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
811 		return 0;
812 
813 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
814 	if (!np)
815 		return ret;
816 
817 	pdev = of_find_device_by_node(np);
818 	of_node_put(np);
819 	if (!pdev) {
820 		pr_warn("%s: failed to find securam device!\n", __func__);
821 		return ret;
822 	}
823 
824 	sram_pool = gen_pool_get(&pdev->dev, NULL);
825 	if (!sram_pool) {
826 		pr_warn("%s: securam pool unavailable!\n", __func__);
827 		goto securam_fail;
828 	}
829 
830 	soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
831 	if (!soc_pm.bu) {
832 		pr_warn("%s: unable to alloc securam!\n", __func__);
833 		ret = -ENOMEM;
834 		goto securam_fail;
835 	}
836 
837 	soc_pm.bu->suspended = 0;
838 	soc_pm.bu->canary = __pa_symbol(&canary);
839 	soc_pm.bu->resume = __pa_symbol(cpu_resume);
840 	if (soc_pm.data.ramc_phy) {
841 		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
842 		if (!located)
843 			goto securam_fail;
844 
845 		/* DDR3PHY_ZQ0SR0 */
846 		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
847 							  0x188);
848 	}
849 
850 	return 0;
851 
852 securam_fail:
853 	put_device(&pdev->dev);
854 	return ret;
855 }
856 
857 static const struct of_device_id atmel_shdwc_ids[] = {
858 	{ .compatible = "atmel,sama5d2-shdwc" },
859 	{ .compatible = "microchip,sam9x60-shdwc" },
860 	{ .compatible = "microchip,sama7g5-shdwc" },
861 	{ /* sentinel. */ }
862 };
863 
864 static void __init at91_pm_modes_init(const u32 *maps, int len)
865 {
866 	struct device_node *np;
867 	int ret, mode;
868 
869 	ret = at91_pm_backup_init();
870 	if (ret) {
871 		if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
872 			soc_pm.data.standby_mode = AT91_PM_ULP0;
873 		if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
874 			soc_pm.data.suspend_mode = AT91_PM_ULP0;
875 	}
876 
877 	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
878 	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
879 		np = of_find_matching_node(NULL, atmel_shdwc_ids);
880 		if (!np) {
881 			pr_warn("%s: failed to find shdwc!\n", __func__);
882 
883 			/* Use ULP0 if it doesn't needs SHDWC.*/
884 			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)))
885 				mode = AT91_PM_ULP0;
886 			else
887 				mode = AT91_PM_STANDBY;
888 
889 			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC))
890 				soc_pm.data.standby_mode = mode;
891 			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))
892 				soc_pm.data.suspend_mode = mode;
893 		} else {
894 			soc_pm.data.shdwc = of_iomap(np, 0);
895 			of_node_put(np);
896 		}
897 	}
898 
899 	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
900 	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
901 		np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
902 		if (!np) {
903 			pr_warn("%s: failed to find sfrbu!\n", __func__);
904 
905 			/*
906 			 * Use ULP0 if it doesn't need SHDWC or if SHDWC
907 			 * was already located.
908 			 */
909 			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) ||
910 			    soc_pm.data.shdwc)
911 				mode = AT91_PM_ULP0;
912 			else
913 				mode = AT91_PM_STANDBY;
914 
915 			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU))
916 				soc_pm.data.standby_mode = mode;
917 			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))
918 				soc_pm.data.suspend_mode = mode;
919 		} else {
920 			soc_pm.data.sfrbu = of_iomap(np, 0);
921 			of_node_put(np);
922 		}
923 	}
924 
925 	/* Unmap all unnecessary. */
926 	if (soc_pm.data.shdwc &&
927 	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
928 	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
929 		iounmap(soc_pm.data.shdwc);
930 		soc_pm.data.shdwc = NULL;
931 	}
932 
933 	if (soc_pm.data.sfrbu &&
934 	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
935 	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
936 		iounmap(soc_pm.data.sfrbu);
937 		soc_pm.data.sfrbu = NULL;
938 	}
939 
940 	return;
941 }
942 
943 struct pmc_info {
944 	unsigned long uhp_udp_mask;
945 	unsigned long mckr;
946 	unsigned long version;
947 };
948 
949 static const struct pmc_info pmc_infos[] __initconst = {
950 	{
951 		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
952 		.mckr = 0x30,
953 		.version = AT91_PMC_V1,
954 	},
955 
956 	{
957 		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
958 		.mckr = 0x30,
959 		.version = AT91_PMC_V1,
960 	},
961 	{
962 		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
963 		.mckr = 0x30,
964 		.version = AT91_PMC_V1,
965 	},
966 	{	.uhp_udp_mask = 0,
967 		.mckr = 0x30,
968 		.version = AT91_PMC_V1,
969 	},
970 	{
971 		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
972 		.mckr = 0x28,
973 		.version = AT91_PMC_V2,
974 	},
975 	{
976 		.mckr = 0x28,
977 		.version = AT91_PMC_V2,
978 	},
979 
980 };
981 
982 static const struct of_device_id atmel_pmc_ids[] __initconst = {
983 	{ .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
984 	{ .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
985 	{ .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] },
986 	{ .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] },
987 	{ .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
988 	{ .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
989 	{ .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] },
990 	{ .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
991 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
992 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
993 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
994 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
995 	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
996 	{ /* sentinel */ },
997 };
998 
999 static void __init at91_pm_modes_validate(const int *modes, int len)
1000 {
1001 	u8 i, standby = 0, suspend = 0;
1002 	int mode;
1003 
1004 	for (i = 0; i < len; i++) {
1005 		if (standby && suspend)
1006 			break;
1007 
1008 		if (modes[i] == soc_pm.data.standby_mode && !standby) {
1009 			standby = 1;
1010 			continue;
1011 		}
1012 
1013 		if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
1014 			suspend = 1;
1015 			continue;
1016 		}
1017 	}
1018 
1019 	if (!standby) {
1020 		if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
1021 			mode = AT91_PM_ULP0;
1022 		else
1023 			mode = AT91_PM_STANDBY;
1024 
1025 		pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
1026 			pm_modes[soc_pm.data.standby_mode].pattern,
1027 			pm_modes[mode].pattern);
1028 		soc_pm.data.standby_mode = mode;
1029 	}
1030 
1031 	if (!suspend) {
1032 		if (soc_pm.data.standby_mode == AT91_PM_ULP0)
1033 			mode = AT91_PM_STANDBY;
1034 		else
1035 			mode = AT91_PM_ULP0;
1036 
1037 		pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
1038 			pm_modes[soc_pm.data.suspend_mode].pattern,
1039 			pm_modes[mode].pattern);
1040 		soc_pm.data.suspend_mode = mode;
1041 	}
1042 }
1043 
1044 static void __init at91_pm_init(void (*pm_idle)(void))
1045 {
1046 	struct device_node *pmc_np;
1047 	const struct of_device_id *of_id;
1048 	const struct pmc_info *pmc;
1049 
1050 	if (at91_cpuidle_device.dev.platform_data)
1051 		platform_device_register(&at91_cpuidle_device);
1052 
1053 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
1054 	soc_pm.data.pmc = of_iomap(pmc_np, 0);
1055 	of_node_put(pmc_np);
1056 	if (!soc_pm.data.pmc) {
1057 		pr_err("AT91: PM not supported, PMC not found\n");
1058 		return;
1059 	}
1060 
1061 	pmc = of_id->data;
1062 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
1063 	soc_pm.data.pmc_mckr_offset = pmc->mckr;
1064 	soc_pm.data.pmc_version = pmc->version;
1065 
1066 	if (pm_idle)
1067 		arm_pm_idle = pm_idle;
1068 
1069 	at91_pm_sram_init();
1070 
1071 	if (at91_suspend_sram_fn) {
1072 		suspend_set_ops(&at91_pm_ops);
1073 		pr_info("AT91: PM: standby: %s, suspend: %s\n",
1074 			pm_modes[soc_pm.data.standby_mode].pattern,
1075 			pm_modes[soc_pm.data.suspend_mode].pattern);
1076 	} else {
1077 		pr_info("AT91: PM not supported, due to no SRAM allocated\n");
1078 	}
1079 }
1080 
1081 void __init at91rm9200_pm_init(void)
1082 {
1083 	int ret;
1084 
1085 	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
1086 		return;
1087 
1088 	/*
1089 	 * Force STANDBY and ULP0 mode to avoid calling
1090 	 * at91_pm_modes_validate() which may increase booting time.
1091 	 * Platform supports anyway only STANDBY and ULP0 modes.
1092 	 */
1093 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
1094 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
1095 
1096 	ret = at91_dt_ramc(false);
1097 	if (ret)
1098 		return;
1099 
1100 	/*
1101 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
1102 	 */
1103 	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
1104 
1105 	at91_pm_init(at91rm9200_idle);
1106 }
1107 
1108 void __init sam9x60_pm_init(void)
1109 {
1110 	static const int modes[] __initconst = {
1111 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
1112 	};
1113 	static const int iomaps[] __initconst = {
1114 		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
1115 	};
1116 	int ret;
1117 
1118 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
1119 		return;
1120 
1121 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1122 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1123 	ret = at91_dt_ramc(false);
1124 	if (ret)
1125 		return;
1126 
1127 	at91_pm_init(NULL);
1128 
1129 	soc_pm.ws_ids = sam9x60_ws_ids;
1130 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
1131 }
1132 
1133 void __init at91sam9_pm_init(void)
1134 {
1135 	int ret;
1136 
1137 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
1138 		return;
1139 
1140 	/*
1141 	 * Force STANDBY and ULP0 mode to avoid calling
1142 	 * at91_pm_modes_validate() which may increase booting time.
1143 	 * Platform supports anyway only STANDBY and ULP0 modes.
1144 	 */
1145 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
1146 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
1147 
1148 	ret = at91_dt_ramc(false);
1149 	if (ret)
1150 		return;
1151 
1152 	at91_pm_init(at91sam9_idle);
1153 }
1154 
1155 void __init sama5_pm_init(void)
1156 {
1157 	static const int modes[] __initconst = {
1158 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
1159 	};
1160 	int ret;
1161 
1162 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
1163 		return;
1164 
1165 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1166 	ret = at91_dt_ramc(false);
1167 	if (ret)
1168 		return;
1169 
1170 	at91_pm_init(NULL);
1171 }
1172 
1173 void __init sama5d2_pm_init(void)
1174 {
1175 	static const int modes[] __initconst = {
1176 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
1177 		AT91_PM_BACKUP,
1178 	};
1179 	static const u32 iomaps[] __initconst = {
1180 		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
1181 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
1182 					  AT91_PM_IOMAP(SFRBU),
1183 	};
1184 	int ret;
1185 
1186 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
1187 		return;
1188 
1189 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1190 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1191 	ret = at91_dt_ramc(false);
1192 	if (ret)
1193 		return;
1194 
1195 	at91_pm_init(NULL);
1196 
1197 	soc_pm.ws_ids = sama5d2_ws_ids;
1198 	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
1199 	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
1200 
1201 	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
1202 	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
1203 	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
1204 	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
1205 }
1206 
1207 void __init sama7_pm_init(void)
1208 {
1209 	static const int modes[] __initconst = {
1210 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
1211 	};
1212 	static const u32 iomaps[] __initconst = {
1213 		[AT91_PM_ULP0]		= AT91_PM_IOMAP(SFRBU),
1214 		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SFRBU) |
1215 					  AT91_PM_IOMAP(SHDWC),
1216 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
1217 					  AT91_PM_IOMAP(SHDWC),
1218 	};
1219 	int ret;
1220 
1221 	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
1222 		return;
1223 
1224 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1225 
1226 	ret = at91_dt_ramc(true);
1227 	if (ret)
1228 		return;
1229 
1230 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1231 	at91_pm_init(NULL);
1232 
1233 	soc_pm.ws_ids = sama7g5_ws_ids;
1234 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
1235 
1236 	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
1237 	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
1238 	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
1239 	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
1240 }
1241 
1242 static int __init at91_pm_modes_select(char *str)
1243 {
1244 	char *s;
1245 	substring_t args[MAX_OPT_ARGS];
1246 	int standby, suspend;
1247 
1248 	if (!str)
1249 		return 0;
1250 
1251 	s = strsep(&str, ",");
1252 	standby = match_token(s, pm_modes, args);
1253 	if (standby < 0)
1254 		return 0;
1255 
1256 	suspend = match_token(str, pm_modes, args);
1257 	if (suspend < 0)
1258 		return 0;
1259 
1260 	soc_pm.data.standby_mode = standby;
1261 	soc_pm.data.suspend_mode = suspend;
1262 
1263 	return 0;
1264 }
1265 early_param("atmel.pm_modes", at91_pm_modes_select);
1266