1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * arch/arm/mach-at91/pm.c 4 * AT91 Power Management 5 * 6 * Copyright (C) 2005 David Brownell 7 */ 8 9 #include <linux/genalloc.h> 10 #include <linux/io.h> 11 #include <linux/of_address.h> 12 #include <linux/of.h> 13 #include <linux/of_platform.h> 14 #include <linux/parser.h> 15 #include <linux/suspend.h> 16 17 #include <linux/clk/at91_pmc.h> 18 #include <linux/platform_data/atmel.h> 19 20 #include <asm/cacheflush.h> 21 #include <asm/fncpy.h> 22 #include <asm/system_misc.h> 23 #include <asm/suspend.h> 24 25 #include "generic.h" 26 #include "pm.h" 27 28 /* 29 * FIXME: this is needed to communicate between the pinctrl driver and 30 * the PM implementation in the machine. Possibly part of the PM 31 * implementation should be moved down into the pinctrl driver and get 32 * called as part of the generic suspend/resume path. 33 */ 34 #ifdef CONFIG_PINCTRL_AT91 35 extern void at91_pinctrl_gpio_suspend(void); 36 extern void at91_pinctrl_gpio_resume(void); 37 #endif 38 39 struct at91_soc_pm { 40 int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); 41 int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); 42 const struct of_device_id *ws_ids; 43 struct at91_pm_data data; 44 }; 45 46 static struct at91_soc_pm soc_pm = { 47 .data = { 48 .standby_mode = AT91_PM_STANDBY, 49 .suspend_mode = AT91_PM_ULP0, 50 }, 51 }; 52 53 static const match_table_t pm_modes __initconst = { 54 { AT91_PM_STANDBY, "standby" }, 55 { AT91_PM_ULP0, "ulp0" }, 56 { AT91_PM_ULP1, "ulp1" }, 57 { AT91_PM_BACKUP, "backup" }, 58 { -1, NULL }, 59 }; 60 61 #define at91_ramc_read(id, field) \ 62 __raw_readl(soc_pm.data.ramc[id] + field) 63 64 #define at91_ramc_write(id, field, value) \ 65 __raw_writel(value, soc_pm.data.ramc[id] + field) 66 67 static int at91_pm_valid_state(suspend_state_t state) 68 { 69 switch (state) { 70 case PM_SUSPEND_ON: 71 case PM_SUSPEND_STANDBY: 72 case PM_SUSPEND_MEM: 73 return 1; 74 75 default: 76 return 0; 77 } 78 } 79 80 static int canary = 0xA5A5A5A5; 81 82 static struct at91_pm_bu { 83 int suspended; 84 unsigned long reserved; 85 phys_addr_t canary; 86 phys_addr_t resume; 87 } *pm_bu; 88 89 struct wakeup_source_info { 90 unsigned int pmc_fsmr_bit; 91 unsigned int shdwc_mr_bit; 92 bool set_polarity; 93 }; 94 95 static const struct wakeup_source_info ws_info[] = { 96 { .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true }, 97 { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) }, 98 { .pmc_fsmr_bit = AT91_PMC_USBAL }, 99 { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD }, 100 { .pmc_fsmr_bit = AT91_PMC_RTTAL }, 101 { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE }, 102 }; 103 104 static const struct of_device_id sama5d2_ws_ids[] = { 105 { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, 106 { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, 107 { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, 108 { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, 109 { .compatible = "usb-ohci", .data = &ws_info[2] }, 110 { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, 111 { .compatible = "usb-ehci", .data = &ws_info[2] }, 112 { .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] }, 113 { /* sentinel */ } 114 }; 115 116 static const struct of_device_id sam9x60_ws_ids[] = { 117 { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, 118 { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, 119 { .compatible = "usb-ohci", .data = &ws_info[2] }, 120 { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, 121 { .compatible = "usb-ehci", .data = &ws_info[2] }, 122 { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, 123 { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] }, 124 { /* sentinel */ } 125 }; 126 127 static int at91_pm_config_ws(unsigned int pm_mode, bool set) 128 { 129 const struct wakeup_source_info *wsi; 130 const struct of_device_id *match; 131 struct platform_device *pdev; 132 struct device_node *np; 133 unsigned int mode = 0, polarity = 0, val = 0; 134 135 if (pm_mode != AT91_PM_ULP1) 136 return 0; 137 138 if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids) 139 return -EPERM; 140 141 if (!set) { 142 writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR); 143 return 0; 144 } 145 146 if (soc_pm.config_shdwc_ws) 147 soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity); 148 149 /* SHDWC.MR */ 150 val = readl(soc_pm.data.shdwc + 0x04); 151 152 /* Loop through defined wakeup sources. */ 153 for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) { 154 pdev = of_find_device_by_node(np); 155 if (!pdev) 156 continue; 157 158 if (device_may_wakeup(&pdev->dev)) { 159 wsi = match->data; 160 161 /* Check if enabled on SHDWC. */ 162 if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit)) 163 goto put_device; 164 165 mode |= wsi->pmc_fsmr_bit; 166 if (wsi->set_polarity) 167 polarity |= wsi->pmc_fsmr_bit; 168 } 169 170 put_device: 171 put_device(&pdev->dev); 172 } 173 174 if (mode) { 175 if (soc_pm.config_pmc_ws) 176 soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity); 177 } else { 178 pr_err("AT91: PM: no ULP1 wakeup sources found!"); 179 } 180 181 return mode ? 0 : -EPERM; 182 } 183 184 static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode, 185 u32 *polarity) 186 { 187 u32 val; 188 189 /* SHDWC.WUIR */ 190 val = readl(shdwc + 0x0c); 191 *mode |= (val & 0x3ff); 192 *polarity |= ((val >> 16) & 0x3ff); 193 194 return 0; 195 } 196 197 static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) 198 { 199 writel(mode, pmc + AT91_PMC_FSMR); 200 writel(polarity, pmc + AT91_PMC_FSPR); 201 202 return 0; 203 } 204 205 static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) 206 { 207 writel(mode, pmc + AT91_PMC_FSMR); 208 209 return 0; 210 } 211 212 /* 213 * Called after processes are frozen, but before we shutdown devices. 214 */ 215 static int at91_pm_begin(suspend_state_t state) 216 { 217 switch (state) { 218 case PM_SUSPEND_MEM: 219 soc_pm.data.mode = soc_pm.data.suspend_mode; 220 break; 221 222 case PM_SUSPEND_STANDBY: 223 soc_pm.data.mode = soc_pm.data.standby_mode; 224 break; 225 226 default: 227 soc_pm.data.mode = -1; 228 } 229 230 return at91_pm_config_ws(soc_pm.data.mode, true); 231 } 232 233 /* 234 * Verify that all the clocks are correct before entering 235 * slow-clock mode. 236 */ 237 static int at91_pm_verify_clocks(void) 238 { 239 unsigned long scsr; 240 int i; 241 242 scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR); 243 244 /* USB must not be using PLLB */ 245 if ((scsr & soc_pm.data.uhp_udp_mask) != 0) { 246 pr_err("AT91: PM - Suspend-to-RAM with USB still active\n"); 247 return 0; 248 } 249 250 /* PCK0..PCK3 must be disabled, or configured to use clk32k */ 251 for (i = 0; i < 4; i++) { 252 u32 css; 253 254 if ((scsr & (AT91_PMC_PCK0 << i)) == 0) 255 continue; 256 css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS; 257 if (css != AT91_PMC_CSS_SLOW) { 258 pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); 259 return 0; 260 } 261 } 262 263 return 1; 264 } 265 266 /* 267 * Call this from platform driver suspend() to see how deeply to suspend. 268 * For example, some controllers (like OHCI) need one of the PLL clocks 269 * in order to act as a wakeup source, and those are not available when 270 * going into slow clock mode. 271 * 272 * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have 273 * the very same problem (but not using at91 main_clk), and it'd be better 274 * to add one generic API rather than lots of platform-specific ones. 275 */ 276 int at91_suspend_entering_slow_clock(void) 277 { 278 return (soc_pm.data.mode >= AT91_PM_ULP0); 279 } 280 EXPORT_SYMBOL(at91_suspend_entering_slow_clock); 281 282 static void (*at91_suspend_sram_fn)(struct at91_pm_data *); 283 extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data); 284 extern u32 at91_pm_suspend_in_sram_sz; 285 286 static int at91_suspend_finish(unsigned long val) 287 { 288 flush_cache_all(); 289 outer_disable(); 290 291 at91_suspend_sram_fn(&soc_pm.data); 292 293 return 0; 294 } 295 296 static void at91_pm_suspend(suspend_state_t state) 297 { 298 if (soc_pm.data.mode == AT91_PM_BACKUP) { 299 pm_bu->suspended = 1; 300 301 cpu_suspend(0, at91_suspend_finish); 302 303 /* The SRAM is lost between suspend cycles */ 304 at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, 305 &at91_pm_suspend_in_sram, 306 at91_pm_suspend_in_sram_sz); 307 } else { 308 at91_suspend_finish(0); 309 } 310 311 outer_resume(); 312 } 313 314 /* 315 * STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup' 316 * event sources; and reduces DRAM power. But otherwise it's identical to 317 * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks. 318 * 319 * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must 320 * suspend more deeply, the master clock switches to the clk32k and turns off 321 * the main oscillator 322 * 323 * AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh 324 */ 325 static int at91_pm_enter(suspend_state_t state) 326 { 327 #ifdef CONFIG_PINCTRL_AT91 328 at91_pinctrl_gpio_suspend(); 329 #endif 330 331 switch (state) { 332 case PM_SUSPEND_MEM: 333 case PM_SUSPEND_STANDBY: 334 /* 335 * Ensure that clocks are in a valid state. 336 */ 337 if (soc_pm.data.mode >= AT91_PM_ULP0 && 338 !at91_pm_verify_clocks()) 339 goto error; 340 341 at91_pm_suspend(state); 342 343 break; 344 345 case PM_SUSPEND_ON: 346 cpu_do_idle(); 347 break; 348 349 default: 350 pr_debug("AT91: PM - bogus suspend state %d\n", state); 351 goto error; 352 } 353 354 error: 355 #ifdef CONFIG_PINCTRL_AT91 356 at91_pinctrl_gpio_resume(); 357 #endif 358 return 0; 359 } 360 361 /* 362 * Called right prior to thawing processes. 363 */ 364 static void at91_pm_end(void) 365 { 366 at91_pm_config_ws(soc_pm.data.mode, false); 367 } 368 369 370 static const struct platform_suspend_ops at91_pm_ops = { 371 .valid = at91_pm_valid_state, 372 .begin = at91_pm_begin, 373 .enter = at91_pm_enter, 374 .end = at91_pm_end, 375 }; 376 377 static struct platform_device at91_cpuidle_device = { 378 .name = "cpuidle-at91", 379 }; 380 381 /* 382 * The AT91RM9200 goes into self-refresh mode with this command, and will 383 * terminate self-refresh automatically on the next SDRAM access. 384 * 385 * Self-refresh mode is exited as soon as a memory access is made, but we don't 386 * know for sure when that happens. However, we need to restore the low-power 387 * mode if it was enabled before going idle. Restoring low-power mode while 388 * still in self-refresh is "not recommended", but seems to work. 389 */ 390 static void at91rm9200_standby(void) 391 { 392 asm volatile( 393 "b 1f\n\t" 394 ".align 5\n\t" 395 "1: mcr p15, 0, %0, c7, c10, 4\n\t" 396 " str %2, [%1, %3]\n\t" 397 " mcr p15, 0, %0, c7, c0, 4\n\t" 398 : 399 : "r" (0), "r" (soc_pm.data.ramc[0]), 400 "r" (1), "r" (AT91_MC_SDRAMC_SRR)); 401 } 402 403 /* We manage both DDRAM/SDRAM controllers, we need more than one value to 404 * remember. 405 */ 406 static void at91_ddr_standby(void) 407 { 408 /* Those two values allow us to delay self-refresh activation 409 * to the maximum. */ 410 u32 lpr0, lpr1 = 0; 411 u32 mdr, saved_mdr0, saved_mdr1 = 0; 412 u32 saved_lpr0, saved_lpr1 = 0; 413 414 /* LPDDR1 --> force DDR2 mode during self-refresh */ 415 saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR); 416 if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) { 417 mdr = saved_mdr0 & ~AT91_DDRSDRC_MD; 418 mdr |= AT91_DDRSDRC_MD_DDR2; 419 at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr); 420 } 421 422 if (soc_pm.data.ramc[1]) { 423 saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); 424 lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; 425 lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; 426 saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR); 427 if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) { 428 mdr = saved_mdr1 & ~AT91_DDRSDRC_MD; 429 mdr |= AT91_DDRSDRC_MD_DDR2; 430 at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr); 431 } 432 } 433 434 saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); 435 lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; 436 lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; 437 438 /* self-refresh mode now */ 439 at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); 440 if (soc_pm.data.ramc[1]) 441 at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); 442 443 cpu_do_idle(); 444 445 at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0); 446 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); 447 if (soc_pm.data.ramc[1]) { 448 at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1); 449 at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); 450 } 451 } 452 453 static void sama5d3_ddr_standby(void) 454 { 455 u32 lpr0; 456 u32 saved_lpr0; 457 458 saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); 459 lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; 460 lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN; 461 462 at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); 463 464 cpu_do_idle(); 465 466 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); 467 } 468 469 /* We manage both DDRAM/SDRAM controllers, we need more than one value to 470 * remember. 471 */ 472 static void at91sam9_sdram_standby(void) 473 { 474 u32 lpr0, lpr1 = 0; 475 u32 saved_lpr0, saved_lpr1 = 0; 476 477 if (soc_pm.data.ramc[1]) { 478 saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); 479 lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; 480 lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; 481 } 482 483 saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); 484 lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; 485 lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; 486 487 /* self-refresh mode now */ 488 at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); 489 if (soc_pm.data.ramc[1]) 490 at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); 491 492 cpu_do_idle(); 493 494 at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); 495 if (soc_pm.data.ramc[1]) 496 at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); 497 } 498 499 struct ramc_info { 500 void (*idle)(void); 501 unsigned int memctrl; 502 }; 503 504 static const struct ramc_info ramc_infos[] __initconst = { 505 { .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC}, 506 { .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC}, 507 { .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, 508 { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, 509 }; 510 511 static const struct of_device_id ramc_ids[] __initconst = { 512 { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] }, 513 { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] }, 514 { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] }, 515 { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] }, 516 { /*sentinel*/ } 517 }; 518 519 static __init void at91_dt_ramc(void) 520 { 521 struct device_node *np; 522 const struct of_device_id *of_id; 523 int idx = 0; 524 void *standby = NULL; 525 const struct ramc_info *ramc; 526 527 for_each_matching_node_and_match(np, ramc_ids, &of_id) { 528 soc_pm.data.ramc[idx] = of_iomap(np, 0); 529 if (!soc_pm.data.ramc[idx]) 530 panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); 531 532 ramc = of_id->data; 533 if (!standby) 534 standby = ramc->idle; 535 soc_pm.data.memctrl = ramc->memctrl; 536 537 idx++; 538 } 539 540 if (!idx) 541 panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); 542 543 if (!standby) { 544 pr_warn("ramc no standby function available\n"); 545 return; 546 } 547 548 at91_cpuidle_device.dev.platform_data = standby; 549 } 550 551 static void at91rm9200_idle(void) 552 { 553 /* 554 * Disable the processor clock. The processor will be automatically 555 * re-enabled by an interrupt or by a reset. 556 */ 557 writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR); 558 } 559 560 static void at91sam9x60_idle(void) 561 { 562 cpu_do_idle(); 563 } 564 565 static void at91sam9_idle(void) 566 { 567 writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR); 568 cpu_do_idle(); 569 } 570 571 static void __init at91_pm_sram_init(void) 572 { 573 struct gen_pool *sram_pool; 574 phys_addr_t sram_pbase; 575 unsigned long sram_base; 576 struct device_node *node; 577 struct platform_device *pdev = NULL; 578 579 for_each_compatible_node(node, NULL, "mmio-sram") { 580 pdev = of_find_device_by_node(node); 581 if (pdev) { 582 of_node_put(node); 583 break; 584 } 585 } 586 587 if (!pdev) { 588 pr_warn("%s: failed to find sram device!\n", __func__); 589 return; 590 } 591 592 sram_pool = gen_pool_get(&pdev->dev, NULL); 593 if (!sram_pool) { 594 pr_warn("%s: sram pool unavailable!\n", __func__); 595 goto out_put_device; 596 } 597 598 sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz); 599 if (!sram_base) { 600 pr_warn("%s: unable to alloc sram!\n", __func__); 601 goto out_put_device; 602 } 603 604 sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); 605 at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase, 606 at91_pm_suspend_in_sram_sz, false); 607 if (!at91_suspend_sram_fn) { 608 pr_warn("SRAM: Could not map\n"); 609 goto out_put_device; 610 } 611 612 /* Copy the pm suspend handler to SRAM */ 613 at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, 614 &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); 615 return; 616 617 out_put_device: 618 put_device(&pdev->dev); 619 return; 620 } 621 622 static bool __init at91_is_pm_mode_active(int pm_mode) 623 { 624 return (soc_pm.data.standby_mode == pm_mode || 625 soc_pm.data.suspend_mode == pm_mode); 626 } 627 628 static int __init at91_pm_backup_init(void) 629 { 630 struct gen_pool *sram_pool; 631 struct device_node *np; 632 struct platform_device *pdev = NULL; 633 int ret = -ENODEV; 634 635 if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) 636 return -EPERM; 637 638 if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) 639 return 0; 640 641 np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); 642 if (!np) { 643 pr_warn("%s: failed to find sfrbu!\n", __func__); 644 return ret; 645 } 646 647 soc_pm.data.sfrbu = of_iomap(np, 0); 648 of_node_put(np); 649 650 np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam"); 651 if (!np) 652 goto securam_fail_no_ref_dev; 653 654 pdev = of_find_device_by_node(np); 655 of_node_put(np); 656 if (!pdev) { 657 pr_warn("%s: failed to find securam device!\n", __func__); 658 goto securam_fail_no_ref_dev; 659 } 660 661 sram_pool = gen_pool_get(&pdev->dev, NULL); 662 if (!sram_pool) { 663 pr_warn("%s: securam pool unavailable!\n", __func__); 664 goto securam_fail; 665 } 666 667 pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); 668 if (!pm_bu) { 669 pr_warn("%s: unable to alloc securam!\n", __func__); 670 ret = -ENOMEM; 671 goto securam_fail; 672 } 673 674 pm_bu->suspended = 0; 675 pm_bu->canary = __pa_symbol(&canary); 676 pm_bu->resume = __pa_symbol(cpu_resume); 677 678 return 0; 679 680 securam_fail: 681 put_device(&pdev->dev); 682 securam_fail_no_ref_dev: 683 iounmap(soc_pm.data.sfrbu); 684 soc_pm.data.sfrbu = NULL; 685 return ret; 686 } 687 688 static void __init at91_pm_use_default_mode(int pm_mode) 689 { 690 if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP) 691 return; 692 693 if (soc_pm.data.standby_mode == pm_mode) 694 soc_pm.data.standby_mode = AT91_PM_ULP0; 695 if (soc_pm.data.suspend_mode == pm_mode) 696 soc_pm.data.suspend_mode = AT91_PM_ULP0; 697 } 698 699 static const struct of_device_id atmel_shdwc_ids[] = { 700 { .compatible = "atmel,sama5d2-shdwc" }, 701 { .compatible = "microchip,sam9x60-shdwc" }, 702 { /* sentinel. */ } 703 }; 704 705 static void __init at91_pm_modes_init(void) 706 { 707 struct device_node *np; 708 int ret; 709 710 if (!at91_is_pm_mode_active(AT91_PM_BACKUP) && 711 !at91_is_pm_mode_active(AT91_PM_ULP1)) 712 return; 713 714 np = of_find_matching_node(NULL, atmel_shdwc_ids); 715 if (!np) { 716 pr_warn("%s: failed to find shdwc!\n", __func__); 717 goto ulp1_default; 718 } 719 720 soc_pm.data.shdwc = of_iomap(np, 0); 721 of_node_put(np); 722 723 ret = at91_pm_backup_init(); 724 if (ret) { 725 if (!at91_is_pm_mode_active(AT91_PM_ULP1)) 726 goto unmap; 727 else 728 goto backup_default; 729 } 730 731 return; 732 733 unmap: 734 iounmap(soc_pm.data.shdwc); 735 soc_pm.data.shdwc = NULL; 736 ulp1_default: 737 at91_pm_use_default_mode(AT91_PM_ULP1); 738 backup_default: 739 at91_pm_use_default_mode(AT91_PM_BACKUP); 740 } 741 742 struct pmc_info { 743 unsigned long uhp_udp_mask; 744 unsigned long mckr; 745 unsigned long version; 746 }; 747 748 static const struct pmc_info pmc_infos[] __initconst = { 749 { 750 .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP, 751 .mckr = 0x30, 752 .version = AT91_PMC_V1, 753 }, 754 755 { 756 .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, 757 .mckr = 0x30, 758 .version = AT91_PMC_V1, 759 }, 760 { 761 .uhp_udp_mask = AT91SAM926x_PMC_UHP, 762 .mckr = 0x30, 763 .version = AT91_PMC_V1, 764 }, 765 { .uhp_udp_mask = 0, 766 .mckr = 0x30, 767 .version = AT91_PMC_V1, 768 }, 769 { 770 .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP, 771 .mckr = 0x28, 772 .version = AT91_PMC_V2, 773 }, 774 }; 775 776 static const struct of_device_id atmel_pmc_ids[] __initconst = { 777 { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] }, 778 { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] }, 779 { .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] }, 780 { .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] }, 781 { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] }, 782 { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] }, 783 { .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] }, 784 { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] }, 785 { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] }, 786 { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, 787 { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, 788 { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] }, 789 { /* sentinel */ }, 790 }; 791 792 static void __init at91_pm_init(void (*pm_idle)(void)) 793 { 794 struct device_node *pmc_np; 795 const struct of_device_id *of_id; 796 const struct pmc_info *pmc; 797 798 if (at91_cpuidle_device.dev.platform_data) 799 platform_device_register(&at91_cpuidle_device); 800 801 pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id); 802 soc_pm.data.pmc = of_iomap(pmc_np, 0); 803 if (!soc_pm.data.pmc) { 804 pr_err("AT91: PM not supported, PMC not found\n"); 805 return; 806 } 807 808 pmc = of_id->data; 809 soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask; 810 soc_pm.data.pmc_mckr_offset = pmc->mckr; 811 soc_pm.data.pmc_version = pmc->version; 812 813 if (pm_idle) 814 arm_pm_idle = pm_idle; 815 816 at91_pm_sram_init(); 817 818 if (at91_suspend_sram_fn) { 819 suspend_set_ops(&at91_pm_ops); 820 pr_info("AT91: PM: standby: %s, suspend: %s\n", 821 pm_modes[soc_pm.data.standby_mode].pattern, 822 pm_modes[soc_pm.data.suspend_mode].pattern); 823 } else { 824 pr_info("AT91: PM not supported, due to no SRAM allocated\n"); 825 } 826 } 827 828 void __init at91rm9200_pm_init(void) 829 { 830 if (!IS_ENABLED(CONFIG_SOC_AT91RM9200)) 831 return; 832 833 at91_dt_ramc(); 834 835 /* 836 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. 837 */ 838 at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0); 839 840 at91_pm_init(at91rm9200_idle); 841 } 842 843 void __init sam9x60_pm_init(void) 844 { 845 if (!IS_ENABLED(CONFIG_SOC_SAM9X60)) 846 return; 847 848 at91_pm_modes_init(); 849 at91_dt_ramc(); 850 at91_pm_init(at91sam9x60_idle); 851 852 soc_pm.ws_ids = sam9x60_ws_ids; 853 soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws; 854 } 855 856 void __init at91sam9_pm_init(void) 857 { 858 if (!IS_ENABLED(CONFIG_SOC_AT91SAM9)) 859 return; 860 861 at91_dt_ramc(); 862 at91_pm_init(at91sam9_idle); 863 } 864 865 void __init sama5_pm_init(void) 866 { 867 if (!IS_ENABLED(CONFIG_SOC_SAMA5)) 868 return; 869 870 at91_dt_ramc(); 871 at91_pm_init(NULL); 872 } 873 874 void __init sama5d2_pm_init(void) 875 { 876 if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) 877 return; 878 879 at91_pm_modes_init(); 880 sama5_pm_init(); 881 882 soc_pm.ws_ids = sama5d2_ws_ids; 883 soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws; 884 soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws; 885 } 886 887 static int __init at91_pm_modes_select(char *str) 888 { 889 char *s; 890 substring_t args[MAX_OPT_ARGS]; 891 int standby, suspend; 892 893 if (!str) 894 return 0; 895 896 s = strsep(&str, ","); 897 standby = match_token(s, pm_modes, args); 898 if (standby < 0) 899 return 0; 900 901 suspend = match_token(str, pm_modes, args); 902 if (suspend < 0) 903 return 0; 904 905 soc_pm.data.standby_mode = standby; 906 soc_pm.data.suspend_mode = suspend; 907 908 return 0; 909 } 910 early_param("atmel.pm_modes", at91_pm_modes_select); 911