xref: /openbmc/linux/arch/arm/mach-at91/Kconfig (revision 9c784f95)

if ARCH_AT91

menu "Atmel AT91 System-on-Chip"

choice
	prompt "Atmel AT91 Processor"

config ARCH_AT91RM9200
	bool "AT91RM9200"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9260
	bool "AT91SAM9260 or AT91SAM9XE"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9261
	bool "AT91SAM9261"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9263
	bool "AT91SAM9263"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9RL
	bool "AT91SAM9RL"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91SAM9G20
	bool "AT91SAM9G20"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91CAP9
	bool "AT91CAP9"
	select GENERIC_TIME
	select GENERIC_CLOCKEVENTS

config ARCH_AT91X40
	bool "AT91x40"

endchoice

config AT91_PMC_UNIT
	bool
	default !ARCH_AT91X40

# ----------------------------------------------------------

if ARCH_AT91RM9200

comment "AT91RM9200 Board Type"

config MACH_ONEARM
	bool "Ajeco 1ARM Single Board Computer"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Ajeco's 1ARM Single Board Computer.
	  <http://www.ajeco.fi/products.htm>

config ARCH_AT91RM9200DK
	bool "Atmel AT91RM9200-DK Development board"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Atmel's AT91RM9200-DK Development board.
	  (Discontinued)

config MACH_AT91RM9200EK
	bool "Atmel AT91RM9200-EK Evaluation Kit"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>

config MACH_CSB337
	bool "Cogent CSB337"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Cogent's CSB337 board.
	  <http://www.cogcomp.com/csb_csb337.htm>

config MACH_CSB637
	bool "Cogent CSB637"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Cogent's CSB637 board.
	  <http://www.cogcomp.com/csb_csb637.htm>

config MACH_CARMEVA
	bool "Conitec ARM&EVA"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
	  <http://www.conitec.net/english/linuxboard.htm>

config MACH_ATEB9200
	bool "Embest ATEB9200"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Embest's ATEB9200 board.
	  <http://www.embedinfo.com/english/product/ATEB9200.asp>

config MACH_KB9200
	bool "KwikByte KB920x"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using KwikByte's KB920x board.
	  <http://kwikbyte.com/KB9202_description_new.htm>

config MACH_PICOTUX2XX
	bool "picotux 200"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using a picotux 200.
	  <http://www.picotux.com/>

config MACH_KAFA
	bool "Sperry-Sun KAFA board"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using Sperry-Sun's KAFA board.

config MACH_ECBAT91
	bool "emQbit ECB_AT91 SBC"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using emQbit's ECB_AT91 board.
	  <http://wiki.emqbit.com/free-ecb-at91>

config MACH_YL9200
	bool "ucDragon YL-9200"
	depends on ARCH_AT91RM9200
	help
	  Select this if you are using the ucDragon YL-9200 board.

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9260

comment "AT91SAM9260 Variants"

config ARCH_AT91SAM9260_SAM9XE
	bool "AT91SAM9XE"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
	  They are basically AT91SAM9260s with various sizes of embedded Flash.

comment "AT91SAM9260 / AT91SAM9XE Board Type"

config MACH_AT91SAM9260EK
	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>

config MACH_CAM60
	bool "KwikByte KB9260 (CAM60) board"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
	  <http://www.kwikbyte.com/KB9260.html>

config MACH_SAM9_L9260
	bool "Olimex SAM9-L9260 board"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
	  <http://www.olimex.com/dev/sam9-L9260.html>

config MACH_AFEB9260
	bool "Custom afeb9260 board v1"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using custom afeb9260 board based on
	  open hardware design. Select this for revision 1 of the board.
	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
	  <http://groups.google.com/group/arm9fpga-evolution-board>

config MACH_USB_A9260
	bool "CALAO USB-A9260"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using a Calao Systems USB-A9260.
	  <http://www.calao-systems.com>

config MACH_QIL_A9260
	bool "CALAO QIL-A9260 board"
	depends on ARCH_AT91SAM9260
	help
	  Select this if you are using a Calao Systems QIL-A9260 Board.
	  <http://www.calao-systems.com>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9261

comment "AT91SAM9261 Board Type"

config MACH_AT91SAM9261EK
	bool "Atmel AT91SAM9261-EK Evaluation Kit"
	depends on ARCH_AT91SAM9261
	help
	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9263

comment "AT91SAM9263 Board Type"

config MACH_AT91SAM9263EK
	bool "Atmel AT91SAM9263-EK Evaluation Kit"
	depends on ARCH_AT91SAM9263
	help
	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>

config MACH_USB_A9263
	bool "CALAO USB-A9263"
	depends on ARCH_AT91SAM9263
	help
	  Select this if you are using a Calao Systems USB-A9263.
	  <http://www.calao-systems.com>

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9RL

comment "AT91SAM9RL Board Type"

config MACH_AT91SAM9RLEK
	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
	depends on ARCH_AT91SAM9RL
	help
	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.

endif

# ----------------------------------------------------------

if ARCH_AT91SAM9G20

comment "AT91SAM9G20 Board Type"

config MACH_AT91SAM9G20EK
	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
	depends on ARCH_AT91SAM9G20
	help
	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.

endif

# ----------------------------------------------------------

if ARCH_AT91CAP9

comment "AT91CAP9 Board Type"

config MACH_AT91CAP9ADK
	bool "Atmel AT91CAP9A-DK Evaluation Kit"
	depends on ARCH_AT91CAP9
	help
	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>

endif

# ----------------------------------------------------------

if ARCH_AT91X40

comment "AT91X40 Board Type"

config MACH_AT91EB01
	bool "Atmel AT91EB01 Evaluation Kit"
	help
	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
	  It is also a popular target for simulators such as GDB's
	  ARM simulator (commonly known as the ARMulator) and the
	  Skyeye simulator.

endif

# ----------------------------------------------------------

comment "AT91 Board Options"

config MTD_AT91_DATAFLASH_CARD
	bool "Enable DataFlash Card support"
	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
	help
	  Enable support for the DataFlash card.

config MTD_NAND_ATMEL_BUSWIDTH_16
	bool "Enable 16-bit data bus interface to NAND flash"
	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
	help
	  On AT91SAM926x boards both types of NAND flash can be present
	  (8 and 16 bit data bus width).

# ----------------------------------------------------------

comment "AT91 Feature Selections"

config AT91_PROGRAMMABLE_CLOCKS
	bool "Programmable Clocks"
	help
	  Select this if you need to program one or more of the PCK0..PCK3
	  programmable clock outputs.

config AT91_TIMER_HZ
       int "Kernel HZ (jiffies per second)"
       range 32 1024
       depends on ARCH_AT91
       default "128" if ARCH_AT91RM9200
       default "100"
       help
	  On AT91rm9200 chips where you're using a system clock derived
	  from the 32768 Hz hardware clock, this tick rate should divide
	  it exactly: use a power-of-two value, such as 128 or 256, to
	  reduce timing errors caused by rounding.

	  On AT91sam926x chips, or otherwise when using a higher precision
	  system clock (of at least several MHz), rounding is less of a
	  problem so it can be safer to use a decimal values like 100.

choice
	prompt "Select a UART for early kernel messages"

config AT91_EARLY_DBGU
	bool "DBGU"

config AT91_EARLY_USART0
	bool "USART0"

config AT91_EARLY_USART1
	bool "USART1"

config AT91_EARLY_USART2
	bool "USART2"
	depends on ! ARCH_AT91X40

config AT91_EARLY_USART3
	bool "USART3"
	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)

config AT91_EARLY_USART4
	bool "USART4"
	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20

config AT91_EARLY_USART5
	bool "USART5"
	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20

endchoice

endmenu

endif