1/* SPDX-License-Identifier: GPL-2.0 */ 2#include <linux/linkage.h> 3#include <linux/threads.h> 4#include <asm/asm-offsets.h> 5#include <asm/assembler.h> 6#include <asm/glue-cache.h> 7#include <asm/glue-proc.h> 8 .text 9 10/* 11 * Implementation of MPIDR hash algorithm through shifting 12 * and OR'ing. 13 * 14 * @dst: register containing hash result 15 * @rs0: register containing affinity level 0 bit shift 16 * @rs1: register containing affinity level 1 bit shift 17 * @rs2: register containing affinity level 2 bit shift 18 * @mpidr: register containing MPIDR value 19 * @mask: register containing MPIDR mask 20 * 21 * Pseudo C-code: 22 * 23 *u32 dst; 24 * 25 *compute_mpidr_hash(u32 rs0, u32 rs1, u32 rs2, u32 mpidr, u32 mask) { 26 * u32 aff0, aff1, aff2; 27 * u32 mpidr_masked = mpidr & mask; 28 * aff0 = mpidr_masked & 0xff; 29 * aff1 = mpidr_masked & 0xff00; 30 * aff2 = mpidr_masked & 0xff0000; 31 * dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2); 32 *} 33 * Input registers: rs0, rs1, rs2, mpidr, mask 34 * Output register: dst 35 * Note: input and output registers must be disjoint register sets 36 (eg: a macro instance with mpidr = r1 and dst = r1 is invalid) 37 */ 38 .macro compute_mpidr_hash dst, rs0, rs1, rs2, mpidr, mask 39 and \mpidr, \mpidr, \mask @ mask out MPIDR bits 40 and \dst, \mpidr, #0xff @ mask=aff0 41 ARM( mov \dst, \dst, lsr \rs0 ) @ dst=aff0>>rs0 42 THUMB( lsr \dst, \dst, \rs0 ) 43 and \mask, \mpidr, #0xff00 @ mask = aff1 44 ARM( orr \dst, \dst, \mask, lsr \rs1 ) @ dst|=(aff1>>rs1) 45 THUMB( lsr \mask, \mask, \rs1 ) 46 THUMB( orr \dst, \dst, \mask ) 47 and \mask, \mpidr, #0xff0000 @ mask = aff2 48 ARM( orr \dst, \dst, \mask, lsr \rs2 ) @ dst|=(aff2>>rs2) 49 THUMB( lsr \mask, \mask, \rs2 ) 50 THUMB( orr \dst, \dst, \mask ) 51 .endm 52 53/* 54 * Save CPU state for a suspend. This saves the CPU general purpose 55 * registers, and allocates space on the kernel stack to save the CPU 56 * specific registers and some other data for resume. 57 * r0 = suspend function arg0 58 * r1 = suspend function 59 * r2 = MPIDR value the resuming CPU will use 60 */ 61ENTRY(__cpu_suspend) 62 stmfd sp!, {r4 - r11, lr} 63#ifdef MULTI_CPU 64 ldr r10, =processor 65 ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state 66#else 67 ldr r4, =cpu_suspend_size 68#endif 69 mov r5, sp @ current virtual SP 70#ifdef CONFIG_VMAP_STACK 71 @ Run the suspend code from the overflow stack so we don't have to rely 72 @ on vmalloc-to-phys conversions anywhere in the arch suspend code. 73 @ The original SP value captured in R5 will be restored on the way out. 74 ldr_this_cpu sp, overflow_stack_ptr, r6, r7 75#endif 76 add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn 77 sub sp, sp, r4 @ allocate CPU state on stack 78 ldr r3, =sleep_save_sp 79 stmfd sp!, {r0, r1} @ save suspend func arg and pointer 80 ldr r3, [r3, #SLEEP_SAVE_SP_VIRT] 81 ALT_SMP(W(nop)) @ don't use adr_l inside ALT_SMP() 82 ALT_UP_B(1f) 83 adr_l r0, mpidr_hash 84 /* This ldmia relies on the memory layout of the mpidr_hash struct */ 85 ldmia r0, {r1, r6-r8} @ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts 86 compute_mpidr_hash r0, r6, r7, r8, r2, r1 87 add r3, r3, r0, lsl #2 881: mov r2, r5 @ virtual SP 89 mov r1, r4 @ size of save block 90 add r0, sp, #8 @ pointer to save block 91 bl __cpu_suspend_save 92 badr lr, cpu_suspend_abort 93 ldmfd sp!, {r0, pc} @ call suspend fn 94ENDPROC(__cpu_suspend) 95 .ltorg 96 97cpu_suspend_abort: 98 ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn 99 teq r0, #0 100 moveq r0, #1 @ force non-zero value 101 mov sp, r2 102 ldmfd sp!, {r4 - r11, pc} 103ENDPROC(cpu_suspend_abort) 104 105/* 106 * r0 = control register value 107 */ 108 .align 5 109 .pushsection .idmap.text,"ax" 110ENTRY(cpu_resume_mmu) 111 ldr r3, =cpu_resume_after_mmu 112 instr_sync 113 mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc 114 mrc p15, 0, r0, c0, c0, 0 @ read id reg 115 instr_sync 116 mov r0, r0 117 mov r0, r0 118 ret r3 @ jump to virtual address 119ENDPROC(cpu_resume_mmu) 120 .popsection 121cpu_resume_after_mmu: 122#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE) 123 @ Before using the vmap'ed stack, we have to switch to swapper_pg_dir 124 @ as the ID map does not cover the vmalloc region. 125 mrc p15, 0, ip, c2, c0, 1 @ read TTBR1 126 mcr p15, 0, ip, c2, c0, 0 @ set TTBR0 127 instr_sync 128#endif 129 bl cpu_init @ restore the und/abt/irq banked regs 130 mov r0, #0 @ return zero on success 131 ldmfd sp!, {r4 - r11, pc} 132ENDPROC(cpu_resume_after_mmu) 133 134 .text 135 .align 136 137#ifdef CONFIG_MCPM 138 .arm 139THUMB( .thumb ) 140ENTRY(cpu_resume_no_hyp) 141ARM_BE8(setend be) @ ensure we are in BE mode 142 b no_hyp 143#endif 144 145#ifdef CONFIG_MMU 146 .arm 147ENTRY(cpu_resume_arm) 148 THUMB( badr r9, 1f ) @ Kernel is entered in ARM. 149 THUMB( bx r9 ) @ If this is a Thumb-2 kernel, 150 THUMB( .thumb ) @ switch to Thumb now. 151 THUMB(1: ) 152#endif 153 154ENTRY(cpu_resume) 155ARM_BE8(setend be) @ ensure we are in BE mode 156#ifdef CONFIG_ARM_VIRT_EXT 157 bl __hyp_stub_install_secondary 158#endif 159 safe_svcmode_maskall r1 160no_hyp: 161 mov r1, #0 162 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) 163 ALT_UP_B(1f) 164 adr_l r2, mpidr_hash @ r2 = struct mpidr_hash phys address 165 166 /* 167 * This ldmia relies on the memory layout of the mpidr_hash 168 * struct mpidr_hash. 169 */ 170 ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts 171 compute_mpidr_hash r1, r4, r5, r6, r0, r3 1721: 173 ldr_l r0, sleep_save_sp + SLEEP_SAVE_SP_PHYS 174 ldr r0, [r0, r1, lsl #2] 175 176 @ load phys pgd, stack, resume fn 177 ARM( ldmia r0!, {r1, sp, pc} ) 178THUMB( ldmia r0!, {r1, r2, r3} ) 179THUMB( mov sp, r2 ) 180THUMB( bx r3 ) 181ENDPROC(cpu_resume) 182 183#ifdef CONFIG_MMU 184ENDPROC(cpu_resume_arm) 185#endif 186#ifdef CONFIG_MCPM 187ENDPROC(cpu_resume_no_hyp) 188#endif 189 190 .data 191 .align 2 192 .type sleep_save_sp, #object 193ENTRY(sleep_save_sp) 194 .space SLEEP_SAVE_SP_SZ @ struct sleep_save_sp 195