1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ARMv6 Performance counter handling code. 4 * 5 * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles 6 * 7 * ARMv6 has 2 configurable performance counters and a single cycle counter. 8 * They all share a single reset bit but can be written to zero so we can use 9 * that for a reset. 10 * 11 * The counters can't be individually enabled or disabled so when we remove 12 * one event and replace it with another we could get spurious counts from the 13 * wrong event. However, we can take advantage of the fact that the 14 * performance counters can export events to the event bus, and the event bus 15 * itself can be monitored. This requires that we *don't* export the events to 16 * the event bus. The procedure for disabling a configurable counter is: 17 * - change the counter to count the ETMEXTOUT[0] signal (0x20). This 18 * effectively stops the counter from counting. 19 * - disable the counter's interrupt generation (each counter has it's 20 * own interrupt enable bit). 21 * Once stopped, the counter value can be written as 0 to reset. 22 * 23 * To enable a counter: 24 * - enable the counter's interrupt generation. 25 * - set the new event type. 26 * 27 * Note: the dedicated cycle counter only counts cycles and can't be 28 * enabled/disabled independently of the others. When we want to disable the 29 * cycle counter, we have to just disable the interrupt reporting and start 30 * ignoring that counter. When re-enabling, we have to reset the value and 31 * enable the interrupt. 32 */ 33 34 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) 35 36 #include <asm/cputype.h> 37 #include <asm/irq_regs.h> 38 39 #include <linux/of.h> 40 #include <linux/perf/arm_pmu.h> 41 #include <linux/platform_device.h> 42 43 enum armv6_perf_types { 44 ARMV6_PERFCTR_ICACHE_MISS = 0x0, 45 ARMV6_PERFCTR_IBUF_STALL = 0x1, 46 ARMV6_PERFCTR_DDEP_STALL = 0x2, 47 ARMV6_PERFCTR_ITLB_MISS = 0x3, 48 ARMV6_PERFCTR_DTLB_MISS = 0x4, 49 ARMV6_PERFCTR_BR_EXEC = 0x5, 50 ARMV6_PERFCTR_BR_MISPREDICT = 0x6, 51 ARMV6_PERFCTR_INSTR_EXEC = 0x7, 52 ARMV6_PERFCTR_DCACHE_HIT = 0x9, 53 ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, 54 ARMV6_PERFCTR_DCACHE_MISS = 0xB, 55 ARMV6_PERFCTR_DCACHE_WBACK = 0xC, 56 ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, 57 ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, 58 ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, 59 ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, 60 ARMV6_PERFCTR_WBUF_DRAINED = 0x12, 61 ARMV6_PERFCTR_CPU_CYCLES = 0xFF, 62 ARMV6_PERFCTR_NOP = 0x20, 63 }; 64 65 enum armv6_counters { 66 ARMV6_CYCLE_COUNTER = 0, 67 ARMV6_COUNTER0, 68 ARMV6_COUNTER1, 69 }; 70 71 /* 72 * The hardware events that we support. We do support cache operations but 73 * we have harvard caches and no way to combine instruction and data 74 * accesses/misses in hardware. 75 */ 76 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { 77 PERF_MAP_ALL_UNSUPPORTED, 78 [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, 79 [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, 80 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, 81 [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, 82 [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, 83 [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, 84 }; 85 86 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] 87 [PERF_COUNT_HW_CACHE_OP_MAX] 88 [PERF_COUNT_HW_CACHE_RESULT_MAX] = { 89 PERF_CACHE_MAP_ALL_UNSUPPORTED, 90 91 /* 92 * The performance counters don't differentiate between read and write 93 * accesses/misses so this isn't strictly correct, but it's the best we 94 * can do. Writes and reads get combined. 95 */ 96 [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, 97 [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, 98 [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, 99 [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, 100 101 [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, 102 103 /* 104 * The ARM performance counters can count micro DTLB misses, micro ITLB 105 * misses and main TLB misses. There isn't an event for TLB misses, so 106 * use the micro misses here and if users want the main TLB misses they 107 * can use a raw counter. 108 */ 109 [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, 110 [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, 111 112 [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, 113 [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, 114 }; 115 116 enum armv6mpcore_perf_types { 117 ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, 118 ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, 119 ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, 120 ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, 121 ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, 122 ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, 123 ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, 124 ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, 125 ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, 126 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, 127 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, 128 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, 129 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, 130 ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, 131 ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, 132 ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, 133 ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, 134 ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, 135 ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, 136 ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, 137 }; 138 139 /* 140 * The hardware events that we support. We do support cache operations but 141 * we have harvard caches and no way to combine instruction and data 142 * accesses/misses in hardware. 143 */ 144 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { 145 PERF_MAP_ALL_UNSUPPORTED, 146 [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, 147 [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, 148 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, 149 [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, 150 [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL, 151 [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL, 152 }; 153 154 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] 155 [PERF_COUNT_HW_CACHE_OP_MAX] 156 [PERF_COUNT_HW_CACHE_RESULT_MAX] = { 157 PERF_CACHE_MAP_ALL_UNSUPPORTED, 158 159 [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, 160 [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, 161 [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, 162 [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, 163 164 [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, 165 166 /* 167 * The ARM performance counters can count micro DTLB misses, micro ITLB 168 * misses and main TLB misses. There isn't an event for TLB misses, so 169 * use the micro misses here and if users want the main TLB misses they 170 * can use a raw counter. 171 */ 172 [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, 173 [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, 174 175 [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, 176 [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, 177 }; 178 179 static inline unsigned long 180 armv6_pmcr_read(void) 181 { 182 u32 val; 183 asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); 184 return val; 185 } 186 187 static inline void 188 armv6_pmcr_write(unsigned long val) 189 { 190 asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); 191 } 192 193 #define ARMV6_PMCR_ENABLE (1 << 0) 194 #define ARMV6_PMCR_CTR01_RESET (1 << 1) 195 #define ARMV6_PMCR_CCOUNT_RESET (1 << 2) 196 #define ARMV6_PMCR_CCOUNT_DIV (1 << 3) 197 #define ARMV6_PMCR_COUNT0_IEN (1 << 4) 198 #define ARMV6_PMCR_COUNT1_IEN (1 << 5) 199 #define ARMV6_PMCR_CCOUNT_IEN (1 << 6) 200 #define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) 201 #define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) 202 #define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) 203 #define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 204 #define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) 205 #define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 206 #define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) 207 208 #define ARMV6_PMCR_OVERFLOWED_MASK \ 209 (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ 210 ARMV6_PMCR_CCOUNT_OVERFLOW) 211 212 static inline int 213 armv6_pmcr_has_overflowed(unsigned long pmcr) 214 { 215 return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; 216 } 217 218 static inline int 219 armv6_pmcr_counter_has_overflowed(unsigned long pmcr, 220 enum armv6_counters counter) 221 { 222 int ret = 0; 223 224 if (ARMV6_CYCLE_COUNTER == counter) 225 ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; 226 else if (ARMV6_COUNTER0 == counter) 227 ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; 228 else if (ARMV6_COUNTER1 == counter) 229 ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; 230 else 231 WARN_ONCE(1, "invalid counter number (%d)\n", counter); 232 233 return ret; 234 } 235 236 static inline u64 armv6pmu_read_counter(struct perf_event *event) 237 { 238 struct hw_perf_event *hwc = &event->hw; 239 int counter = hwc->idx; 240 unsigned long value = 0; 241 242 if (ARMV6_CYCLE_COUNTER == counter) 243 asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); 244 else if (ARMV6_COUNTER0 == counter) 245 asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); 246 else if (ARMV6_COUNTER1 == counter) 247 asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); 248 else 249 WARN_ONCE(1, "invalid counter number (%d)\n", counter); 250 251 return value; 252 } 253 254 static inline void armv6pmu_write_counter(struct perf_event *event, u64 value) 255 { 256 struct hw_perf_event *hwc = &event->hw; 257 int counter = hwc->idx; 258 259 if (ARMV6_CYCLE_COUNTER == counter) 260 asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); 261 else if (ARMV6_COUNTER0 == counter) 262 asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); 263 else if (ARMV6_COUNTER1 == counter) 264 asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); 265 else 266 WARN_ONCE(1, "invalid counter number (%d)\n", counter); 267 } 268 269 static void armv6pmu_enable_event(struct perf_event *event) 270 { 271 unsigned long val, mask, evt, flags; 272 struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); 273 struct hw_perf_event *hwc = &event->hw; 274 struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); 275 int idx = hwc->idx; 276 277 if (ARMV6_CYCLE_COUNTER == idx) { 278 mask = 0; 279 evt = ARMV6_PMCR_CCOUNT_IEN; 280 } else if (ARMV6_COUNTER0 == idx) { 281 mask = ARMV6_PMCR_EVT_COUNT0_MASK; 282 evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | 283 ARMV6_PMCR_COUNT0_IEN; 284 } else if (ARMV6_COUNTER1 == idx) { 285 mask = ARMV6_PMCR_EVT_COUNT1_MASK; 286 evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | 287 ARMV6_PMCR_COUNT1_IEN; 288 } else { 289 WARN_ONCE(1, "invalid counter number (%d)\n", idx); 290 return; 291 } 292 293 /* 294 * Mask out the current event and set the counter to count the event 295 * that we're interested in. 296 */ 297 raw_spin_lock_irqsave(&events->pmu_lock, flags); 298 val = armv6_pmcr_read(); 299 val &= ~mask; 300 val |= evt; 301 armv6_pmcr_write(val); 302 raw_spin_unlock_irqrestore(&events->pmu_lock, flags); 303 } 304 305 static irqreturn_t 306 armv6pmu_handle_irq(struct arm_pmu *cpu_pmu) 307 { 308 unsigned long pmcr = armv6_pmcr_read(); 309 struct perf_sample_data data; 310 struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events); 311 struct pt_regs *regs; 312 int idx; 313 314 if (!armv6_pmcr_has_overflowed(pmcr)) 315 return IRQ_NONE; 316 317 regs = get_irq_regs(); 318 319 /* 320 * The interrupts are cleared by writing the overflow flags back to 321 * the control register. All of the other bits don't have any effect 322 * if they are rewritten, so write the whole value back. 323 */ 324 armv6_pmcr_write(pmcr); 325 326 for (idx = 0; idx < cpu_pmu->num_events; ++idx) { 327 struct perf_event *event = cpuc->events[idx]; 328 struct hw_perf_event *hwc; 329 330 /* Ignore if we don't have an event. */ 331 if (!event) 332 continue; 333 334 /* 335 * We have a single interrupt for all counters. Check that 336 * each counter has overflowed before we process it. 337 */ 338 if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) 339 continue; 340 341 hwc = &event->hw; 342 armpmu_event_update(event); 343 perf_sample_data_init(&data, 0, hwc->last_period); 344 if (!armpmu_event_set_period(event)) 345 continue; 346 347 if (perf_event_overflow(event, &data, regs)) 348 cpu_pmu->disable(event); 349 } 350 351 /* 352 * Handle the pending perf events. 353 * 354 * Note: this call *must* be run with interrupts disabled. For 355 * platforms that can have the PMU interrupts raised as an NMI, this 356 * will not work. 357 */ 358 irq_work_run(); 359 360 return IRQ_HANDLED; 361 } 362 363 static void armv6pmu_start(struct arm_pmu *cpu_pmu) 364 { 365 unsigned long flags, val; 366 struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); 367 368 raw_spin_lock_irqsave(&events->pmu_lock, flags); 369 val = armv6_pmcr_read(); 370 val |= ARMV6_PMCR_ENABLE; 371 armv6_pmcr_write(val); 372 raw_spin_unlock_irqrestore(&events->pmu_lock, flags); 373 } 374 375 static void armv6pmu_stop(struct arm_pmu *cpu_pmu) 376 { 377 unsigned long flags, val; 378 struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); 379 380 raw_spin_lock_irqsave(&events->pmu_lock, flags); 381 val = armv6_pmcr_read(); 382 val &= ~ARMV6_PMCR_ENABLE; 383 armv6_pmcr_write(val); 384 raw_spin_unlock_irqrestore(&events->pmu_lock, flags); 385 } 386 387 static int 388 armv6pmu_get_event_idx(struct pmu_hw_events *cpuc, 389 struct perf_event *event) 390 { 391 struct hw_perf_event *hwc = &event->hw; 392 /* Always place a cycle counter into the cycle counter. */ 393 if (ARMV6_PERFCTR_CPU_CYCLES == hwc->config_base) { 394 if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) 395 return -EAGAIN; 396 397 return ARMV6_CYCLE_COUNTER; 398 } else { 399 /* 400 * For anything other than a cycle counter, try and use 401 * counter0 and counter1. 402 */ 403 if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) 404 return ARMV6_COUNTER1; 405 406 if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) 407 return ARMV6_COUNTER0; 408 409 /* The counters are all in use. */ 410 return -EAGAIN; 411 } 412 } 413 414 static void armv6pmu_clear_event_idx(struct pmu_hw_events *cpuc, 415 struct perf_event *event) 416 { 417 clear_bit(event->hw.idx, cpuc->used_mask); 418 } 419 420 static void armv6pmu_disable_event(struct perf_event *event) 421 { 422 unsigned long val, mask, evt, flags; 423 struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); 424 struct hw_perf_event *hwc = &event->hw; 425 struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); 426 int idx = hwc->idx; 427 428 if (ARMV6_CYCLE_COUNTER == idx) { 429 mask = ARMV6_PMCR_CCOUNT_IEN; 430 evt = 0; 431 } else if (ARMV6_COUNTER0 == idx) { 432 mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; 433 evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; 434 } else if (ARMV6_COUNTER1 == idx) { 435 mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; 436 evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; 437 } else { 438 WARN_ONCE(1, "invalid counter number (%d)\n", idx); 439 return; 440 } 441 442 /* 443 * Mask out the current event and set the counter to count the number 444 * of ETM bus signal assertion cycles. The external reporting should 445 * be disabled and so this should never increment. 446 */ 447 raw_spin_lock_irqsave(&events->pmu_lock, flags); 448 val = armv6_pmcr_read(); 449 val &= ~mask; 450 val |= evt; 451 armv6_pmcr_write(val); 452 raw_spin_unlock_irqrestore(&events->pmu_lock, flags); 453 } 454 455 static void armv6mpcore_pmu_disable_event(struct perf_event *event) 456 { 457 unsigned long val, mask, flags, evt = 0; 458 struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); 459 struct hw_perf_event *hwc = &event->hw; 460 struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events); 461 int idx = hwc->idx; 462 463 if (ARMV6_CYCLE_COUNTER == idx) { 464 mask = ARMV6_PMCR_CCOUNT_IEN; 465 } else if (ARMV6_COUNTER0 == idx) { 466 mask = ARMV6_PMCR_COUNT0_IEN; 467 } else if (ARMV6_COUNTER1 == idx) { 468 mask = ARMV6_PMCR_COUNT1_IEN; 469 } else { 470 WARN_ONCE(1, "invalid counter number (%d)\n", idx); 471 return; 472 } 473 474 /* 475 * Unlike UP ARMv6, we don't have a way of stopping the counters. We 476 * simply disable the interrupt reporting. 477 */ 478 raw_spin_lock_irqsave(&events->pmu_lock, flags); 479 val = armv6_pmcr_read(); 480 val &= ~mask; 481 val |= evt; 482 armv6_pmcr_write(val); 483 raw_spin_unlock_irqrestore(&events->pmu_lock, flags); 484 } 485 486 static int armv6_map_event(struct perf_event *event) 487 { 488 return armpmu_map_event(event, &armv6_perf_map, 489 &armv6_perf_cache_map, 0xFF); 490 } 491 492 static void armv6pmu_init(struct arm_pmu *cpu_pmu) 493 { 494 cpu_pmu->handle_irq = armv6pmu_handle_irq; 495 cpu_pmu->enable = armv6pmu_enable_event; 496 cpu_pmu->disable = armv6pmu_disable_event; 497 cpu_pmu->read_counter = armv6pmu_read_counter; 498 cpu_pmu->write_counter = armv6pmu_write_counter; 499 cpu_pmu->get_event_idx = armv6pmu_get_event_idx; 500 cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx; 501 cpu_pmu->start = armv6pmu_start; 502 cpu_pmu->stop = armv6pmu_stop; 503 cpu_pmu->map_event = armv6_map_event; 504 cpu_pmu->num_events = 3; 505 } 506 507 static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) 508 { 509 armv6pmu_init(cpu_pmu); 510 cpu_pmu->name = "armv6_1136"; 511 return 0; 512 } 513 514 static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) 515 { 516 armv6pmu_init(cpu_pmu); 517 cpu_pmu->name = "armv6_1156"; 518 return 0; 519 } 520 521 static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) 522 { 523 armv6pmu_init(cpu_pmu); 524 cpu_pmu->name = "armv6_1176"; 525 return 0; 526 } 527 528 /* 529 * ARMv6mpcore is almost identical to single core ARMv6 with the exception 530 * that some of the events have different enumerations and that there is no 531 * *hack* to stop the programmable counters. To stop the counters we simply 532 * disable the interrupt reporting and update the event. When unthrottling we 533 * reset the period and enable the interrupt reporting. 534 */ 535 536 static int armv6mpcore_map_event(struct perf_event *event) 537 { 538 return armpmu_map_event(event, &armv6mpcore_perf_map, 539 &armv6mpcore_perf_cache_map, 0xFF); 540 } 541 542 static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) 543 { 544 cpu_pmu->name = "armv6_11mpcore"; 545 cpu_pmu->handle_irq = armv6pmu_handle_irq; 546 cpu_pmu->enable = armv6pmu_enable_event; 547 cpu_pmu->disable = armv6mpcore_pmu_disable_event; 548 cpu_pmu->read_counter = armv6pmu_read_counter; 549 cpu_pmu->write_counter = armv6pmu_write_counter; 550 cpu_pmu->get_event_idx = armv6pmu_get_event_idx; 551 cpu_pmu->clear_event_idx = armv6pmu_clear_event_idx; 552 cpu_pmu->start = armv6pmu_start; 553 cpu_pmu->stop = armv6pmu_stop; 554 cpu_pmu->map_event = armv6mpcore_map_event; 555 cpu_pmu->num_events = 3; 556 557 return 0; 558 } 559 560 static const struct of_device_id armv6_pmu_of_device_ids[] = { 561 {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, 562 {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, 563 {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, 564 { /* sentinel value */ } 565 }; 566 567 static const struct pmu_probe_info armv6_pmu_probe_table[] = { 568 ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init), 569 ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init), 570 ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init), 571 ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init), 572 { /* sentinel value */ } 573 }; 574 575 static int armv6_pmu_device_probe(struct platform_device *pdev) 576 { 577 return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids, 578 armv6_pmu_probe_table); 579 } 580 581 static struct platform_driver armv6_pmu_driver = { 582 .driver = { 583 .name = "armv6-pmu", 584 .of_match_table = armv6_pmu_of_device_ids, 585 }, 586 .probe = armv6_pmu_device_probe, 587 }; 588 589 builtin_platform_driver(armv6_pmu_driver); 590 #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ 591