1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Copyright (c) 2012 Linaro Limited. 4 */ 5 6#include <linux/init.h> 7#include <linux/irqchip/arm-gic-v3.h> 8#include <linux/linkage.h> 9#include <asm/assembler.h> 10#include <asm/virt.h> 11 12#ifndef ZIMAGE 13/* 14 * For the kernel proper, we need to find out the CPU boot mode long after 15 * boot, so we need to store it in a writable variable. 16 * 17 * This is not in .bss, because we set it sufficiently early that the boot-time 18 * zeroing of .bss would clobber it. 19 */ 20.data 21 .align 2 22ENTRY(__boot_cpu_mode) 23 .long 0 24.text 25 26 /* 27 * Save the primary CPU boot mode. Requires 3 scratch registers. 28 */ 29 .macro store_primary_cpu_mode reg1, reg2, reg3 30 mrs \reg1, cpsr 31 and \reg1, \reg1, #MODE_MASK 32 adr \reg2, .L__boot_cpu_mode_offset 33 ldr \reg3, [\reg2] 34 str \reg1, [\reg2, \reg3] 35 .endm 36 37 /* 38 * Compare the current mode with the one saved on the primary CPU. 39 * If they don't match, record that fact. The Z bit indicates 40 * if there's a match or not. 41 * Requires 3 additionnal scratch registers. 42 */ 43 .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 44 adr \reg2, .L__boot_cpu_mode_offset 45 ldr \reg3, [\reg2] 46 ldr \reg1, [\reg2, \reg3] 47 cmp \mode, \reg1 @ matches primary CPU boot mode? 48 orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH 49 strne \reg1, [\reg2, \reg3] @ record what happened and give up 50 .endm 51 52#else /* ZIMAGE */ 53 54 .macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req 55 .endm 56 57/* 58 * The zImage loader only runs on one CPU, so we don't bother with mult-CPU 59 * consistency checking: 60 */ 61 .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 62 cmp \mode, \mode 63 .endm 64 65#endif /* ZIMAGE */ 66 67/* 68 * Hypervisor stub installation functions. 69 * 70 * These must be called with the MMU and D-cache off. 71 * They are not ABI compliant and are only intended to be called from the kernel 72 * entry points in head.S. 73 */ 74@ Call this from the primary CPU 75ENTRY(__hyp_stub_install) 76 store_primary_cpu_mode r4, r5, r6 77ENDPROC(__hyp_stub_install) 78 79 @ fall through... 80 81@ Secondary CPUs should call here 82ENTRY(__hyp_stub_install_secondary) 83 mrs r4, cpsr 84 and r4, r4, #MODE_MASK 85 86 /* 87 * If the secondary has booted with a different mode, give up 88 * immediately. 89 */ 90 compare_cpu_mode_with_primary r4, r5, r6, r7 91 retne lr 92 93 /* 94 * Once we have given up on one CPU, we do not try to install the 95 * stub hypervisor on the remaining ones: because the saved boot mode 96 * is modified, it can't compare equal to the CPSR mode field any 97 * more. 98 * 99 * Otherwise... 100 */ 101 102 cmp r4, #HYP_MODE 103 retne lr @ give up if the CPU is not in HYP mode 104 105/* 106 * Configure HSCTLR to set correct exception endianness/instruction set 107 * state etc. 108 * Turn off all traps 109 * Eventually, CPU-specific code might be needed -- assume not for now 110 * 111 * This code relies on the "eret" instruction to synchronize the 112 * various coprocessor accesses. This is done when we switch to SVC 113 * (see safe_svcmode_maskall). 114 */ 115 @ Now install the hypervisor stub: 116 W(adr) r7, __hyp_stub_vectors 117 mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR) 118 119 @ Disable all traps, so we don't get any nasty surprise 120 mov r7, #0 121 mcr p15, 4, r7, c1, c1, 0 @ HCR 122 mcr p15, 4, r7, c1, c1, 2 @ HCPTR 123 mcr p15, 4, r7, c1, c1, 3 @ HSTR 124 125THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE 126ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE 127 mcr p15, 4, r7, c1, c0, 0 @ HSCTLR 128 129 mrc p15, 4, r7, c1, c1, 1 @ HDCR 130 and r7, #0x1f @ Preserve HPMN 131 mcr p15, 4, r7, c1, c1, 1 @ HDCR 132 133 @ Make sure NS-SVC is initialised appropriately 134 mrc p15, 0, r7, c1, c0, 0 @ SCTLR 135 orr r7, #(1 << 5) @ CP15 barriers enabled 136 bic r7, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7) 137 bic r7, #(3 << 19) @ WXN and UWXN disabled 138 mcr p15, 0, r7, c1, c0, 0 @ SCTLR 139 140 mrc p15, 0, r7, c0, c0, 0 @ MIDR 141 mcr p15, 4, r7, c0, c0, 0 @ VPIDR 142 143 mrc p15, 0, r7, c0, c0, 5 @ MPIDR 144 mcr p15, 4, r7, c0, c0, 5 @ VMPIDR 145 146#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER) 147 @ make CNTP_* and CNTPCT accessible from PL1 148 mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 149 ubfx r7, r7, #16, #4 150 teq r7, #0 151 beq 1f 152 mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL 153 orr r7, r7, #3 @ PL1PCEN | PL1PCTEN 154 mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL 155 mov r7, #0 156 mcrr p15, 4, r7, r7, c14 @ CNTVOFF 157 158 @ Disable virtual timer in case it was counting 159 mrc p15, 0, r7, c14, c3, 1 @ CNTV_CTL 160 bic r7, #1 @ Clear ENABLE 161 mcr p15, 0, r7, c14, c3, 1 @ CNTV_CTL 1621: 163#endif 164 165#ifdef CONFIG_ARM_GIC_V3 166 @ Check whether GICv3 system registers are available 167 mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 168 ubfx r7, r7, #28, #4 169 teq r7, #0 170 beq 2f 171 172 @ Enable system register accesses 173 mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE 174 orr r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE) 175 mcr p15, 4, r7, c12, c9, 5 @ ICC_HSRE 176 isb 177 178 @ SRE bit could be forced to 0 by firmware. 179 @ Check whether it sticks before accessing any other sysreg 180 mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE 181 tst r7, #ICC_SRE_EL2_SRE 182 beq 2f 183 mov r7, #0 184 mcr p15, 4, r7, c12, c11, 0 @ ICH_HCR 1852: 186#endif 187 188 bx lr @ The boot CPU mode is left in r4. 189ENDPROC(__hyp_stub_install_secondary) 190 191__hyp_stub_do_trap: 192#ifdef ZIMAGE 193 teq r0, #HVC_SET_VECTORS 194 bne 1f 195 /* Only the ZIMAGE stubs can change the HYP vectors */ 196 mcr p15, 4, r1, c12, c0, 0 @ set HVBAR 197 b __hyp_stub_exit 198#endif 199 2001: teq r0, #HVC_SOFT_RESTART 201 bne 2f 202 bx r1 203 2042: ldr r0, =HVC_STUB_ERR 205 __ERET 206 207__hyp_stub_exit: 208 mov r0, #0 209 __ERET 210ENDPROC(__hyp_stub_do_trap) 211 212/* 213 * __hyp_set_vectors is only used when ZIMAGE must bounce between HYP 214 * and SVC. For the kernel itself, the vectors are set once and for 215 * all by the stubs. 216 */ 217ENTRY(__hyp_set_vectors) 218 mov r1, r0 219 mov r0, #HVC_SET_VECTORS 220 __HVC(0) 221 ret lr 222ENDPROC(__hyp_set_vectors) 223 224ENTRY(__hyp_soft_restart) 225 mov r1, r0 226 mov r0, #HVC_SOFT_RESTART 227 __HVC(0) 228 ret lr 229ENDPROC(__hyp_soft_restart) 230 231#ifndef ZIMAGE 232.align 2 233.L__boot_cpu_mode_offset: 234 .long __boot_cpu_mode - . 235#endif 236 237.align 5 238ENTRY(__hyp_stub_vectors) 239__hyp_stub_reset: W(b) . 240__hyp_stub_und: W(b) . 241__hyp_stub_svc: W(b) . 242__hyp_stub_pabort: W(b) . 243__hyp_stub_dabort: W(b) . 244__hyp_stub_trap: W(b) __hyp_stub_do_trap 245__hyp_stub_irq: W(b) . 246__hyp_stub_fiq: W(b) . 247ENDPROC(__hyp_stub_vectors) 248 249