1/* 2 * linux/arch/arm/kernel/head-nommu.S 3 * 4 * Copyright (C) 1994-2002 Russell King 5 * Copyright (C) 2003-2006 Hyok S. Choi 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 * Common kernel startup code (non-paged MM) 12 * 13 */ 14#include <linux/linkage.h> 15#include <linux/init.h> 16#include <linux/errno.h> 17 18#include <asm/assembler.h> 19#include <asm/ptrace.h> 20#include <asm/asm-offsets.h> 21#include <asm/memory.h> 22#include <asm/cp15.h> 23#include <asm/thread_info.h> 24#include <asm/v7m.h> 25#include <asm/mpu.h> 26#include <asm/page.h> 27 28/* 29 * Kernel startup entry point. 30 * --------------------------- 31 * 32 * This is normally called from the decompressor code. The requirements 33 * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, 34 * r1 = machine nr. 35 * 36 * See linux/arch/arm/tools/mach-types for the complete list of machine 37 * numbers for r1. 38 * 39 */ 40 41 __HEAD 42 43#ifdef CONFIG_CPU_THUMBONLY 44 .thumb 45ENTRY(stext) 46#else 47 .arm 48ENTRY(stext) 49 50 THUMB( badr r9, 1f ) @ Kernel is always entered in ARM. 51 THUMB( bx r9 ) @ If this is a Thumb-2 kernel, 52 THUMB( .thumb ) @ switch to Thumb now. 53 THUMB(1: ) 54#endif 55 56#ifdef CONFIG_ARM_VIRT_EXT 57 bl __hyp_stub_install 58#endif 59 @ ensure svc mode and all interrupts masked 60 safe_svcmode_maskall r9 61 @ and irqs disabled 62#if defined(CONFIG_CPU_CP15) 63 mrc p15, 0, r9, c0, c0 @ get processor id 64#elif defined(CONFIG_CPU_V7M) 65 ldr r9, =BASEADDR_V7M_SCB 66 ldr r9, [r9, V7M_SCB_CPUID] 67#else 68 ldr r9, =CONFIG_PROCESSOR_ID 69#endif 70 bl __lookup_processor_type @ r5=procinfo r9=cpuid 71 movs r10, r5 @ invalid processor (r5=0)? 72 beq __error_p @ yes, error 'p' 73 74#ifdef CONFIG_ARM_MPU 75 bl __setup_mpu 76#endif 77 78 badr lr, 1f @ return (PIC) address 79 ldr r12, [r10, #PROCINFO_INITFUNC] 80 add r12, r12, r10 81 ret r12 821: ldr lr, =__mmap_switched 83 b __after_proc_init 84ENDPROC(stext) 85 86#ifdef CONFIG_SMP 87 .text 88ENTRY(secondary_startup) 89 /* 90 * Common entry point for secondary CPUs. 91 * 92 * Ensure that we're in SVC mode, and IRQs are disabled. Lookup 93 * the processor type - there is no need to check the machine type 94 * as it has already been validated by the primary processor. 95 */ 96#ifdef CONFIG_ARM_VIRT_EXT 97 bl __hyp_stub_install_secondary 98#endif 99 safe_svcmode_maskall r9 100 101#ifndef CONFIG_CPU_CP15 102 ldr r9, =CONFIG_PROCESSOR_ID 103#else 104 mrc p15, 0, r9, c0, c0 @ get processor id 105#endif 106 bl __lookup_processor_type @ r5=procinfo r9=cpuid 107 movs r10, r5 @ invalid processor? 108 beq __error_p @ yes, error 'p' 109 110 ldr r7, __secondary_data 111 112#ifdef CONFIG_ARM_MPU 113 bl __secondary_setup_mpu @ Initialize the MPU 114#endif 115 116 badr lr, 1f @ return (PIC) address 117 ldr r12, [r10, #PROCINFO_INITFUNC] 118 add r12, r12, r10 119 ret r12 1201: bl __after_proc_init 121 ldr sp, [r7, #12] @ set up the stack pointer 122 mov fp, #0 123 b secondary_start_kernel 124ENDPROC(secondary_startup) 125 126 .type __secondary_data, %object 127__secondary_data: 128 .long secondary_data 129#endif /* CONFIG_SMP */ 130 131/* 132 * Set the Control Register and Read the process ID. 133 */ 134 .text 135__after_proc_init: 136#ifdef CONFIG_ARM_MPU 137M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) 138M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) 139M_CLASS(ldr r3, [r12, 0x50]) 140AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0 141 and r3, r3, #(MMFR0_PMSA) @ PMSA field 142 teq r3, #(MMFR0_PMSAv7) @ PMSA v7 143 beq 1f 144 teq r3, #(MMFR0_PMSAv8) @ PMSA v8 145 /* 146 * Memory region attributes for PMSAv8: 147 * 148 * n = AttrIndx[2:0] 149 * n MAIR 150 * DEVICE_nGnRnE 000 00000000 151 * NORMAL 001 11111111 152 */ 153 ldreq r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) | \ 154 PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL) 155AR_CLASS(mcreq p15, 0, r3, c10, c2, 0) @ MAIR 0 156M_CLASS(streq r3, [r12, #PMSAv8_MAIR0]) 157 moveq r3, #0 158AR_CLASS(mcreq p15, 0, r3, c10, c2, 1) @ MAIR 1 159M_CLASS(streq r3, [r12, #PMSAv8_MAIR1]) 160 1611: 162#endif 163#ifdef CONFIG_CPU_CP15 164 /* 165 * CP15 system control register value returned in r0 from 166 * the CPU init function. 167 */ 168 169#ifdef CONFIG_ARM_MPU 170 biceq r0, r0, #CR_BR @ Disable the 'default mem-map' 171 orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on) 172#endif 173#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 174 orr r0, r0, #CR_A 175#else 176 bic r0, r0, #CR_A 177#endif 178#ifdef CONFIG_CPU_DCACHE_DISABLE 179 bic r0, r0, #CR_C 180#endif 181#ifdef CONFIG_CPU_BPREDICT_DISABLE 182 bic r0, r0, #CR_Z 183#endif 184#ifdef CONFIG_CPU_ICACHE_DISABLE 185 bic r0, r0, #CR_I 186#endif 187 mcr p15, 0, r0, c1, c0, 0 @ write control reg 188 instr_sync 189#elif defined (CONFIG_CPU_V7M) 190#ifdef CONFIG_ARM_MPU 191 ldreq r3, [r12, MPU_CTRL] 192 biceq r3, #MPU_CTRL_PRIVDEFENA 193 orreq r3, #MPU_CTRL_ENABLE 194 streq r3, [r12, MPU_CTRL] 195 isb 196#endif 197 /* For V7M systems we want to modify the CCR similarly to the SCTLR */ 198#ifdef CONFIG_CPU_DCACHE_DISABLE 199 bic r0, r0, #V7M_SCB_CCR_DC 200#endif 201#ifdef CONFIG_CPU_BPREDICT_DISABLE 202 bic r0, r0, #V7M_SCB_CCR_BP 203#endif 204#ifdef CONFIG_CPU_ICACHE_DISABLE 205 bic r0, r0, #V7M_SCB_CCR_IC 206#endif 207 str r0, [r12, V7M_SCB_CCR] 208#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */ 209 ret lr 210ENDPROC(__after_proc_init) 211 .ltorg 212 213#ifdef CONFIG_ARM_MPU 214 215 216#ifndef CONFIG_CPU_V7M 217/* Set which MPU region should be programmed */ 218.macro set_region_nr tmp, rgnr, unused 219 mov \tmp, \rgnr @ Use static region numbers 220 mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR 221.endm 222 223/* Setup a single MPU region, either D or I side (D-side for unified) */ 224.macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused 225 mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR 226 mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR 227 mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR 228.endm 229#else 230.macro set_region_nr tmp, rgnr, base 231 mov \tmp, \rgnr 232 str \tmp, [\base, #PMSAv7_RNR] 233.endm 234 235.macro setup_region bar, acr, sr, unused, base 236 lsl \acr, \acr, #16 237 orr \acr, \acr, \sr 238 str \bar, [\base, #PMSAv7_RBAR] 239 str \acr, [\base, #PMSAv7_RASR] 240.endm 241 242#endif 243/* 244 * Setup the MPU and initial MPU Regions. We create the following regions: 245 * Region 0: Use this for probing the MPU details, so leave disabled. 246 * Region 1: Background region - covers the whole of RAM as strongly ordered 247 * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6 248 * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page 249 * 250 * r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION 251*/ 252 __HEAD 253 254ENTRY(__setup_mpu) 255 256 /* Probe for v7 PMSA compliance */ 257M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) 258M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) 259 260AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0 261M_CLASS(ldr r0, [r12, 0x50]) 262 and r0, r0, #(MMFR0_PMSA) @ PMSA field 263 teq r0, #(MMFR0_PMSAv7) @ PMSA v7 264 beq __setup_pmsa_v7 265 teq r0, #(MMFR0_PMSAv8) @ PMSA v8 266 beq __setup_pmsa_v8 267 268 ret lr 269ENDPROC(__setup_mpu) 270 271ENTRY(__setup_pmsa_v7) 272 /* Calculate the size of a region covering just the kernel */ 273 ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET 274 ldr r6, =(_end) @ Cover whole kernel 275 sub r6, r6, r5 @ Minimum size of region to map 276 clz r6, r6 @ Region size must be 2^N... 277 rsb r6, r6, #31 @ ...so round up region size 278 lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field 279 orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit 280 281 /* Determine whether the D/I-side memory map is unified. We set the 282 * flags here and continue to use them for the rest of this function */ 283AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR 284M_CLASS(ldr r0, [r12, #MPU_TYPE]) 285 ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU 286 bxeq lr 287 tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified 288 289 /* Setup second region first to free up r6 */ 290 set_region_nr r0, #PMSAv7_RAM_REGION, r12 291 isb 292 /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ 293 ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET 294 ldr r5,=(PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL) 295 296 setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled 297 beq 1f @ Memory-map not unified 298 setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled 2991: isb 300 301 /* First/background region */ 302 set_region_nr r0, #PMSAv7_BG_REGION, r12 303 isb 304 /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ 305 mov r0, #0 @ BG region starts at 0x0 306 ldr r5,=(PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0NA) 307 mov r6, #PMSAv7_RSR_ALL_MEM @ 4GB region, enabled 308 309 setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ 0x0, BG region, enabled 310 beq 2f @ Memory-map not unified 311 setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12 @ 0x0, BG region, enabled 3122: isb 313 314#ifdef CONFIG_XIP_KERNEL 315 set_region_nr r0, #PMSAv7_ROM_REGION, r12 316 isb 317 318 ldr r5,=(PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL) 319 320 ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start 321 ldr r6, =(_exiprom) @ ROM end 322 sub r6, r6, r0 @ Minimum size of region to map 323 clz r6, r6 @ Region size must be 2^N... 324 rsb r6, r6, #31 @ ...so round up region size 325 lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field 326 orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit 327 328 setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 329 beq 3f @ Memory-map not unified 330 setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 3313: isb 332#endif 333 ret lr 334ENDPROC(__setup_pmsa_v7) 335 336ENTRY(__setup_pmsa_v8) 337 mov r0, #0 338AR_CLASS(mcr p15, 0, r0, c6, c2, 1) @ PRSEL 339M_CLASS(str r0, [r12, #PMSAv8_RNR]) 340 isb 341 342#ifdef CONFIG_XIP_KERNEL 343 ldr r5, =CONFIG_XIP_PHYS_ADDR @ ROM start 344 ldr r6, =(_exiprom) @ ROM end 345 sub r6, r6, #1 346 bic r6, r6, #(PMSAv8_MINALIGN - 1) 347 348 orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) 349 orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) 350 351AR_CLASS(mcr p15, 0, r5, c6, c8, 0) @ PRBAR0 352AR_CLASS(mcr p15, 0, r6, c6, c8, 1) @ PRLAR0 353M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(0)]) 354M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(0)]) 355#endif 356 357 ldr r5, =KERNEL_START 358 ldr r6, =KERNEL_END 359 sub r6, r6, #1 360 bic r6, r6, #(PMSAv8_MINALIGN - 1) 361 362 orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) 363 orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) 364 365AR_CLASS(mcr p15, 0, r5, c6, c8, 4) @ PRBAR1 366AR_CLASS(mcr p15, 0, r6, c6, c8, 5) @ PRLAR1 367M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(1)]) 368M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(1)]) 369 370 /* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */ 371#ifdef CONFIG_XIP_KERNEL 372 ldr r6, =KERNEL_START 373 ldr r5, =CONFIG_XIP_PHYS_ADDR 374 cmp r6, r5 375 movcs r6, r5 376#else 377 ldr r6, =KERNEL_START 378#endif 379 cmp r6, #0 380 beq 1f 381 382 mov r5, #0 383 sub r6, r6, #1 384 bic r6, r6, #(PMSAv8_MINALIGN - 1) 385 386 orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) 387 orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) 388 389AR_CLASS(mcr p15, 0, r5, c6, c9, 0) @ PRBAR2 390AR_CLASS(mcr p15, 0, r6, c6, c9, 1) @ PRLAR2 391M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(2)]) 392M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(2)]) 393 3941: 395 /* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */ 396#ifdef CONFIG_XIP_KERNEL 397 ldr r5, =KERNEL_END 398 ldr r6, =(_exiprom) 399 cmp r5, r6 400 movcc r5, r6 401#else 402 ldr r5, =KERNEL_END 403#endif 404 mov r6, #0xffffffff 405 bic r6, r6, #(PMSAv8_MINALIGN - 1) 406 407 orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) 408 orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) 409 410AR_CLASS(mcr p15, 0, r5, c6, c9, 4) @ PRBAR3 411AR_CLASS(mcr p15, 0, r6, c6, c9, 5) @ PRLAR3 412M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(3)]) 413M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)]) 414 415#ifdef CONFIG_XIP_KERNEL 416 /* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */ 417 ldr r5, =(_exiprom) 418 ldr r6, =KERNEL_END 419 cmp r5, r6 420 movcs r5, r6 421 422 ldr r6, =KERNEL_START 423 ldr r0, =CONFIG_XIP_PHYS_ADDR 424 cmp r6, r0 425 movcc r6, r0 426 427 sub r6, r6, #1 428 bic r6, r6, #(PMSAv8_MINALIGN - 1) 429 430 orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) 431 orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) 432 433#ifdef CONFIG_CPU_V7M 434 /* There is no alias for n == 4 */ 435 mov r0, #4 436 str r0, [r12, #PMSAv8_RNR] @ PRSEL 437 isb 438 439 str r5, [r12, #PMSAv8_RBAR_A(0)] 440 str r6, [r12, #PMSAv8_RLAR_A(0)] 441#else 442 mcr p15, 0, r5, c6, c10, 1 @ PRBAR4 443 mcr p15, 0, r6, c6, c10, 2 @ PRLAR4 444#endif 445#endif 446 ret lr 447ENDPROC(__setup_pmsa_v8) 448 449#ifdef CONFIG_SMP 450/* 451 * r6: pointer at mpu_rgn_info 452 */ 453 454 .text 455ENTRY(__secondary_setup_mpu) 456 /* Use MPU region info supplied by __cpu_up */ 457 ldr r6, [r7] @ get secondary_data.mpu_rgn_info 458 459 /* Probe for v7 PMSA compliance */ 460 mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 461 and r0, r0, #(MMFR0_PMSA) @ PMSA field 462 teq r0, #(MMFR0_PMSAv7) @ PMSA v7 463 beq __secondary_setup_pmsa_v7 464 teq r0, #(MMFR0_PMSAv8) @ PMSA v8 465 beq __secondary_setup_pmsa_v8 466 b __error_p 467ENDPROC(__secondary_setup_mpu) 468 469/* 470 * r6: pointer at mpu_rgn_info 471 */ 472ENTRY(__secondary_setup_pmsa_v7) 473 /* Determine whether the D/I-side memory map is unified. We set the 474 * flags here and continue to use them for the rest of this function */ 475 mrc p15, 0, r0, c0, c0, 4 @ MPUIR 476 ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU 477 beq __error_p 478 479 ldr r4, [r6, #MPU_RNG_INFO_USED] 480 mov r5, #MPU_RNG_SIZE 481 add r3, r6, #MPU_RNG_INFO_RNGS 482 mla r3, r4, r5, r3 483 4841: 485 tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified 486 sub r3, r3, #MPU_RNG_SIZE 487 sub r4, r4, #1 488 489 set_region_nr r0, r4 490 isb 491 492 ldr r0, [r3, #MPU_RGN_DRBAR] 493 ldr r6, [r3, #MPU_RGN_DRSR] 494 ldr r5, [r3, #MPU_RGN_DRACR] 495 496 setup_region r0, r5, r6, PMSAv7_DATA_SIDE 497 beq 2f 498 setup_region r0, r5, r6, PMSAv7_INSTR_SIDE 4992: isb 500 501 mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR 502 cmp r4, #0 503 bgt 1b 504 505 ret lr 506ENDPROC(__secondary_setup_pmsa_v7) 507 508ENTRY(__secondary_setup_pmsa_v8) 509 ldr r4, [r6, #MPU_RNG_INFO_USED] 510#ifndef CONFIG_XIP_KERNEL 511 add r4, r4, #1 512#endif 513 mov r5, #MPU_RNG_SIZE 514 add r3, r6, #MPU_RNG_INFO_RNGS 515 mla r3, r4, r5, r3 516 5171: 518 sub r3, r3, #MPU_RNG_SIZE 519 sub r4, r4, #1 520 521 mcr p15, 0, r4, c6, c2, 1 @ PRSEL 522 isb 523 524 ldr r5, [r3, #MPU_RGN_PRBAR] 525 ldr r6, [r3, #MPU_RGN_PRLAR] 526 527 mcr p15, 0, r5, c6, c3, 0 @ PRBAR 528 mcr p15, 0, r6, c6, c3, 1 @ PRLAR 529 530 cmp r4, #0 531 bgt 1b 532 533 ret lr 534ENDPROC(__secondary_setup_pmsa_v8) 535#endif /* CONFIG_SMP */ 536#endif /* CONFIG_ARM_MPU */ 537#include "head-common.S" 538