1#include <linux/init.h> 2#include <linux/linkage.h> 3 4#include <asm/assembler.h> 5#include <asm/asm-offsets.h> 6#include <asm/errno.h> 7#include <asm/thread_info.h> 8#include <asm/v7m.h> 9 10@ Bad Abort numbers 11@ ----------------- 12@ 13#define BAD_PREFETCH 0 14#define BAD_DATA 1 15#define BAD_ADDREXCPTN 2 16#define BAD_IRQ 3 17#define BAD_UNDEFINSTR 4 18 19@ 20@ Most of the stack format comes from struct pt_regs, but with 21@ the addition of 8 bytes for storing syscall args 5 and 6. 22@ This _must_ remain a multiple of 8 for EABI. 23@ 24#define S_OFF 8 25 26/* 27 * The SWI code relies on the fact that R0 is at the bottom of the stack 28 * (due to slow/fast restore user regs). 29 */ 30#if S_R0 != 0 31#error "Please fix" 32#endif 33 34 .macro zero_fp 35#ifdef CONFIG_FRAME_POINTER 36 mov fp, #0 37#endif 38 .endm 39 40 .macro alignment_trap, rtemp 41#ifdef CONFIG_ALIGNMENT_TRAP 42 ldr \rtemp, .LCcralign 43 ldr \rtemp, [\rtemp] 44 mcr p15, 0, \rtemp, c1, c0 45#endif 46 .endm 47 48#ifdef CONFIG_CPU_V7M 49/* 50 * ARMv7-M exception entry/exit macros. 51 * 52 * xPSR, ReturnAddress(), LR (R14), R12, R3, R2, R1, and R0 are 53 * automatically saved on the current stack (32 words) before 54 * switching to the exception stack (SP_main). 55 * 56 * If exception is taken while in user mode, SP_main is 57 * empty. Otherwise, SP_main is aligned to 64 bit automatically 58 * (CCR.STKALIGN set). 59 * 60 * Linux assumes that the interrupts are disabled when entering an 61 * exception handler and it may BUG if this is not the case. Interrupts 62 * are disabled during entry and reenabled in the exit macro. 63 * 64 * v7m_exception_slow_exit is used when returning from SVC or PendSV. 65 * When returning to kernel mode, we don't return from exception. 66 */ 67 .macro v7m_exception_entry 68 @ determine the location of the registers saved by the core during 69 @ exception entry. Depending on the mode the cpu was in when the 70 @ exception happend that is either on the main or the process stack. 71 @ Bit 2 of EXC_RETURN stored in the lr register specifies which stack 72 @ was used. 73 tst lr, #EXC_RET_STACK_MASK 74 mrsne r12, psp 75 moveq r12, sp 76 77 @ we cannot rely on r0-r3 and r12 matching the value saved in the 78 @ exception frame because of tail-chaining. So these have to be 79 @ reloaded. 80 ldmia r12!, {r0-r3} 81 82 @ Linux expects to have irqs off. Do it here before taking stack space 83 cpsid i 84 85 sub sp, #S_FRAME_SIZE-S_IP 86 stmdb sp!, {r0-r11} 87 88 @ load saved r12, lr, return address and xPSR. 89 @ r0-r7 are used for signals and never touched from now on. Clobbering 90 @ r8-r12 is OK. 91 mov r9, r12 92 ldmia r9!, {r8, r10-r12} 93 94 @ calculate the original stack pointer value. 95 @ r9 currently points to the memory location just above the auto saved 96 @ xPSR. 97 @ The cpu might automatically 8-byte align the stack. Bit 9 98 @ of the saved xPSR specifies if stack aligning took place. In this case 99 @ another 32-bit value is included in the stack. 100 101 tst r12, V7M_xPSR_FRAMEPTRALIGN 102 addne r9, r9, #4 103 104 @ store saved r12 using str to have a register to hold the base for stm 105 str r8, [sp, #S_IP] 106 add r8, sp, #S_SP 107 @ store r13-r15, xPSR 108 stmia r8!, {r9-r12} 109 @ store old_r0 110 str r0, [r8] 111 .endm 112 113 /* 114 * PENDSV and SVCALL are configured to have the same exception 115 * priorities. As a kernel thread runs at SVCALL execution priority it 116 * can never be preempted and so we will never have to return to a 117 * kernel thread here. 118 */ 119 .macro v7m_exception_slow_exit ret_r0 120 cpsid i 121 ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK 122 123 @ read original r12, sp, lr, pc and xPSR 124 add r12, sp, #S_IP 125 ldmia r12, {r1-r5} 126 127 @ an exception frame is always 8-byte aligned. To tell the hardware if 128 @ the sp to be restored is aligned or not set bit 9 of the saved xPSR 129 @ accordingly. 130 tst r2, #4 131 subne r2, r2, #4 132 orrne r5, V7M_xPSR_FRAMEPTRALIGN 133 biceq r5, V7M_xPSR_FRAMEPTRALIGN 134 135 @ write basic exception frame 136 stmdb r2!, {r1, r3-r5} 137 ldmia sp, {r1, r3-r5} 138 .if \ret_r0 139 stmdb r2!, {r0, r3-r5} 140 .else 141 stmdb r2!, {r1, r3-r5} 142 .endif 143 144 @ restore process sp 145 msr psp, r2 146 147 @ restore original r4-r11 148 ldmia sp!, {r0-r11} 149 150 @ restore main sp 151 add sp, sp, #S_FRAME_SIZE-S_IP 152 153 cpsie i 154 bx lr 155 .endm 156#endif /* CONFIG_CPU_V7M */ 157 158 @ 159 @ Store/load the USER SP and LR registers by switching to the SYS 160 @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not 161 @ available. Should only be called from SVC mode 162 @ 163 .macro store_user_sp_lr, rd, rtemp, offset = 0 164 mrs \rtemp, cpsr 165 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) 166 msr cpsr_c, \rtemp @ switch to the SYS mode 167 168 str sp, [\rd, #\offset] @ save sp_usr 169 str lr, [\rd, #\offset + 4] @ save lr_usr 170 171 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) 172 msr cpsr_c, \rtemp @ switch back to the SVC mode 173 .endm 174 175 .macro load_user_sp_lr, rd, rtemp, offset = 0 176 mrs \rtemp, cpsr 177 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) 178 msr cpsr_c, \rtemp @ switch to the SYS mode 179 180 ldr sp, [\rd, #\offset] @ load sp_usr 181 ldr lr, [\rd, #\offset + 4] @ load lr_usr 182 183 eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE) 184 msr cpsr_c, \rtemp @ switch back to the SVC mode 185 .endm 186 187#ifndef CONFIG_THUMB2_KERNEL 188 .macro svc_exit, rpsr, irq = 0 189 .if \irq != 0 190 @ IRQs already off 191#ifdef CONFIG_TRACE_IRQFLAGS 192 @ The parent context IRQs must have been enabled to get here in 193 @ the first place, so there's no point checking the PSR I bit. 194 bl trace_hardirqs_on 195#endif 196 .else 197 @ IRQs off again before pulling preserved data off the stack 198 disable_irq_notrace 199#ifdef CONFIG_TRACE_IRQFLAGS 200 tst \rpsr, #PSR_I_BIT 201 bleq trace_hardirqs_on 202 tst \rpsr, #PSR_I_BIT 203 blne trace_hardirqs_off 204#endif 205 .endif 206 msr spsr_cxsf, \rpsr 207#if defined(CONFIG_CPU_V6) 208 ldr r0, [sp] 209 strex r1, r2, [sp] @ clear the exclusive monitor 210 ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr 211#elif defined(CONFIG_CPU_32v6K) 212 clrex @ clear the exclusive monitor 213 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr 214#else 215 ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr 216#endif 217 .endm 218 219 .macro restore_user_regs, fast = 0, offset = 0 220 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr 221 ldr lr, [sp, #\offset + S_PC]! @ get pc 222 msr spsr_cxsf, r1 @ save in spsr_svc 223#if defined(CONFIG_CPU_V6) 224 strex r1, r2, [sp] @ clear the exclusive monitor 225#elif defined(CONFIG_CPU_32v6K) 226 clrex @ clear the exclusive monitor 227#endif 228 .if \fast 229 ldmdb sp, {r1 - lr}^ @ get calling r1 - lr 230 .else 231 ldmdb sp, {r0 - lr}^ @ get calling r0 - lr 232 .endif 233 mov r0, r0 @ ARMv5T and earlier require a nop 234 @ after ldm {}^ 235 add sp, sp, #S_FRAME_SIZE - S_PC 236 movs pc, lr @ return & move spsr_svc into cpsr 237 .endm 238 239 .macro get_thread_info, rd 240 mov \rd, sp, lsr #13 241 mov \rd, \rd, lsl #13 242 .endm 243 244 @ 245 @ 32-bit wide "mov pc, reg" 246 @ 247 .macro movw_pc, reg 248 mov pc, \reg 249 .endm 250#else /* CONFIG_THUMB2_KERNEL */ 251 .macro svc_exit, rpsr, irq = 0 252 .if \irq != 0 253 @ IRQs already off 254#ifdef CONFIG_TRACE_IRQFLAGS 255 @ The parent context IRQs must have been enabled to get here in 256 @ the first place, so there's no point checking the PSR I bit. 257 bl trace_hardirqs_on 258#endif 259 .else 260 @ IRQs off again before pulling preserved data off the stack 261 disable_irq_notrace 262#ifdef CONFIG_TRACE_IRQFLAGS 263 tst \rpsr, #PSR_I_BIT 264 bleq trace_hardirqs_on 265 tst \rpsr, #PSR_I_BIT 266 blne trace_hardirqs_off 267#endif 268 .endif 269 ldr lr, [sp, #S_SP] @ top of the stack 270 ldrd r0, r1, [sp, #S_LR] @ calling lr and pc 271 clrex @ clear the exclusive monitor 272 stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context 273 ldmia sp, {r0 - r12} 274 mov sp, lr 275 ldr lr, [sp], #4 276 rfeia sp! 277 .endm 278 279#ifdef CONFIG_CPU_V7M 280 /* 281 * Note we don't need to do clrex here as clearing the local monitor is 282 * part of each exception entry and exit sequence. 283 */ 284 .macro restore_user_regs, fast = 0, offset = 0 285 .if \offset 286 add sp, #\offset 287 .endif 288 v7m_exception_slow_exit ret_r0 = \fast 289 .endm 290#else /* ifdef CONFIG_CPU_V7M */ 291 .macro restore_user_regs, fast = 0, offset = 0 292 clrex @ clear the exclusive monitor 293 mov r2, sp 294 load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr 295 ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr 296 ldr lr, [sp, #\offset + S_PC] @ get pc 297 add sp, sp, #\offset + S_SP 298 msr spsr_cxsf, r1 @ save in spsr_svc 299 .if \fast 300 ldmdb sp, {r1 - r12} @ get calling r1 - r12 301 .else 302 ldmdb sp, {r0 - r12} @ get calling r0 - r12 303 .endif 304 add sp, sp, #S_FRAME_SIZE - S_SP 305 movs pc, lr @ return & move spsr_svc into cpsr 306 .endm 307#endif /* ifdef CONFIG_CPU_V7M / else */ 308 309 .macro get_thread_info, rd 310 mov \rd, sp 311 lsr \rd, \rd, #13 312 mov \rd, \rd, lsl #13 313 .endm 314 315 @ 316 @ 32-bit wide "mov pc, reg" 317 @ 318 .macro movw_pc, reg 319 mov pc, \reg 320 nop 321 .endm 322#endif /* !CONFIG_THUMB2_KERNEL */ 323 324/* 325 * Context tracking subsystem. Used to instrument transitions 326 * between user and kernel mode. 327 */ 328 .macro ct_user_exit, save = 1 329#ifdef CONFIG_CONTEXT_TRACKING 330 .if \save 331 stmdb sp!, {r0-r3, ip, lr} 332 bl context_tracking_user_exit 333 ldmia sp!, {r0-r3, ip, lr} 334 .else 335 bl context_tracking_user_exit 336 .endif 337#endif 338 .endm 339 340 .macro ct_user_enter, save = 1 341#ifdef CONFIG_CONTEXT_TRACKING 342 .if \save 343 stmdb sp!, {r0-r3, ip, lr} 344 bl context_tracking_user_enter 345 ldmia sp!, {r0-r3, ip, lr} 346 .else 347 bl context_tracking_user_enter 348 .endif 349#endif 350 .endm 351 352/* 353 * These are the registers used in the syscall handler, and allow us to 354 * have in theory up to 7 arguments to a function - r0 to r6. 355 * 356 * r7 is reserved for the system call number for thumb mode. 357 * 358 * Note that tbl == why is intentional. 359 * 360 * We must set at least "tsk" and "why" when calling ret_with_reschedule. 361 */ 362scno .req r7 @ syscall number 363tbl .req r8 @ syscall table pointer 364why .req r8 @ Linux syscall (!= 0) 365tsk .req r9 @ current thread_info 366