1/* 2 * Copyright (C) 2010,2011 Google, Inc. 3 * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. 4 * 5 * Author: 6 * Colin Cross <ccross@google.com> 7 * Erik Gilling <konkers@google.com> 8 * Doug Anderson <dianders@chromium.org> 9 * Stephen Warren <swarren@nvidia.com> 10 * 11 * Portions based on mach-omap2's debug-macro.S 12 * Copyright (C) 1994-1999 Russell King 13 * 14 * This software is licensed under the terms of the GNU General Public 15 * License version 2, as published by the Free Software Foundation, and 16 * may be copied, distributed, and modified under those terms. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 */ 24 25#include <linux/serial_reg.h> 26 27#define UART_SHIFT 2 28 29/* Physical addresses */ 30#define TEGRA_CLK_RESET_BASE 0x60006000 31#define TEGRA_APB_MISC_BASE 0x70000000 32#define TEGRA_UARTA_BASE 0x70006000 33#define TEGRA_UARTB_BASE 0x70006040 34#define TEGRA_UARTC_BASE 0x70006200 35#define TEGRA_UARTD_BASE 0x70006300 36#define TEGRA_UARTE_BASE 0x70006400 37#define TEGRA_PMC_BASE 0x7000e400 38 39#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) 40#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) 41#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) 42#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) 43#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) 44#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) 45#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) 46#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) 47 48/* 49 * Must be section-aligned since a section mapping is used early on. 50 * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[]. 51 */ 52#define UART_VIRTUAL_BASE 0xfe800000 53 54#define checkuart(rp, rv, lhu, bit, uart) \ 55 /* Load address of CLK_RST register */ \ 56 ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \ 57 /* Load value from CLK_RST register */ \ 58 ldr rp, [rp, #0] ; \ 59 /* Test UART's reset bit */ \ 60 tst rp, #(1 << bit) ; \ 61 /* If set, can't use UART; jump to save no UART */ \ 62 bne 90f ; \ 63 /* Load address of CLK_OUT_ENB register */ \ 64 ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \ 65 /* Load value from CLK_OUT_ENB register */ \ 66 ldr rp, [rp, #0] ; \ 67 /* Test UART's clock enable bit */ \ 68 tst rp, #(1 << bit) ; \ 69 /* If clear, can't use UART; jump to save no UART */ \ 70 beq 90f ; \ 71 /* Passed all tests, load address of UART registers */ \ 72 ldr rp, =TEGRA_UART##uart##_BASE ; \ 73 /* Jump to save UART address */ \ 74 b 91f 75 76 .macro addruart, rp, rv, tmp 77 adr \rp, 99f @ actual addr of 99f 78 ldr \rv, [\rp] @ linked addr is stored there 79 sub \rv, \rv, \rp @ offset between the two 80 ldr \rp, [\rp, #4] @ linked tegra_uart_config 81 sub \tmp, \rp, \rv @ actual tegra_uart_config 82 ldr \rp, [\tmp] @ Load tegra_uart_config 83 cmp \rp, #1 @ needs initialization? 84 bne 100f @ no; go load the addresses 85 mov \rv, #0 @ yes; record init is done 86 str \rv, [\tmp] 87 88#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA 89 /* Check ODMDATA */ 9010: ldr \rp, =TEGRA_PMC_SCRATCH20 91 ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 92 lsr \rv, \rp, #18 @ 19:18 are console type 93 and \rv, \rv, #3 94 cmp \rv, #2 @ 2 and 3 mean DCC, UART 95 beq 11f @ some boards swap the meaning 96 cmp \rv, #3 @ so accept either 97 bne 90f 9811: lsr \rv, \rp, #15 @ 17:15 are UART ID 99 and \rv, #7 100 cmp \rv, #0 @ UART 0? 101 beq 20f 102 cmp \rv, #1 @ UART 1? 103 beq 21f 104 cmp \rv, #2 @ UART 2? 105 beq 22f 106 cmp \rv, #3 @ UART 3? 107 beq 23f 108 cmp \rv, #4 @ UART 4? 109 beq 24f 110 b 90f @ invalid 111#endif 112 113#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ 114 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 115 /* Check UART A validity */ 11620: checkuart(\rp, \rv, L, 6, A) 117#endif 118 119#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ 120 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 121 /* Check UART B validity */ 12221: checkuart(\rp, \rv, L, 7, B) 123#endif 124 125#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ 126 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 127 /* Check UART C validity */ 12822: checkuart(\rp, \rv, H, 23, C) 129#endif 130 131#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ 132 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 133 /* Check UART D validity */ 13423: checkuart(\rp, \rv, U, 1, D) 135#endif 136 137#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ 138 defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) 139 /* Check UART E validity */ 14024: 141 checkuart(\rp, \rv, U, 2, E) 142#endif 143 144 /* No valid UART found */ 14590: mov \rp, #0 146 /* fall through */ 147 148 /* Record whichever UART we chose */ 14991: str \rp, [\tmp, #4] @ Store in tegra_uart_phys 150 cmp \rp, #0 @ Valid UART address? 151 bne 92f @ Yes, go process it 152 str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt 153 b 100f @ Done 15492: and \rv, \rp, #0xffffff @ offset within 1MB section 155 add \rv, \rv, #UART_VIRTUAL_BASE 156 str \rv, [\tmp, #8] @ Store in tegra_uart_virt 157 b 100f 158 159 .align 16099: .word . 161 .word tegra_uart_config 162 .ltorg 163 164 /* Load previously selected UART address */ 165100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys 166 ldr \rv, [\tmp, #8] @ Load tegra_uart_virt 167 .endm 168 169/* 170 * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra 171 * check to make sure that the UART address is actually valid. 172 */ 173 174 .macro senduart, rd, rx 175 cmp \rx, #0 176 strneb \rd, [\rx, #UART_TX << UART_SHIFT] 1771001: 178 .endm 179 180 .macro busyuart, rd, rx 181 cmp \rx, #0 182 beq 1002f 1831001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] 184 and \rd, \rd, #UART_LSR_THRE 185 teq \rd, #UART_LSR_THRE 186 bne 1001b 1871002: 188 .endm 189 190 .macro waituart, rd, rx 191#ifdef FLOW_CONTROL 192 cmp \rx, #0 193 beq 1002f 1941001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] 195 tst \rd, #UART_MSR_CTS 196 beq 1001b 1971002: 198#endif 199 .endm 200 201/* 202 * Storage for the state maintained by the macros above. 203 * 204 * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. 205 * That's because this header is included from multiple files, and we only 206 * want a single copy of the data. In particular, the UART probing code above 207 * assumes it's running using physical addresses. This is true when this file 208 * is included from head.o, but not when included from debug.o. So we need 209 * to share the probe results between the two copies, rather than having 210 * to re-run the probing again later. 211 * 212 * In the decompressor, we put the symbol/storage right here, since common.c 213 * isn't included in the decompressor build. This symbol gets put in .text 214 * even though it's really data, since .data is discarded from the 215 * decompressor. Luckily, .text is writeable in the decompressor, unless 216 * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. 217 */ 218#if defined(ZIMAGE) 219tegra_uart_config: 220 /* Debug UART initialization required */ 221 .word 1 222 /* Debug UART physical address */ 223 .word 0 224 /* Debug UART virtual address */ 225 .word 0 226#endif 227