1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* arch/arm/include/debug/sa1100.S 3 * 4 * Debugging macro include header 5 * 6 * Copyright (C) 1994-1999 Russell King 7 * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks 8*/ 9 10#define UTCR3 0x0c 11#define UTDR 0x14 12#define UTSR1 0x20 13#define UTCR3_TXE 0x00000002 /* Transmit Enable */ 14#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ 15#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ 16 17 .macro addruart, rp, rv, tmp 18 mrc p15, 0, \rp, c1, c0 19 tst \rp, #1 @ MMU enabled? 20 moveq \rp, #0x80000000 @ physical base address 21 movne \rp, #0xf8000000 @ virtual address 22 23 @ We probe for the active serial port here, coherently with 24 @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. 25 @ We assume r1 can be clobbered. 26 27 @ see if Ser3 is active 28 add \rp, \rp, #0x00050000 29 ldr \rv, [\rp, #UTCR3] 30 tst \rv, #UTCR3_TXE 31 32 @ if Ser3 is inactive, then try Ser1 33 addeq \rp, \rp, #(0x00010000 - 0x00050000) 34 ldreq \rv, [\rp, #UTCR3] 35 tsteq \rv, #UTCR3_TXE 36 37 @ if Ser1 is inactive, then try Ser2 38 addeq \rp, \rp, #(0x00030000 - 0x00010000) 39 ldreq \rv, [\rp, #UTCR3] 40 tsteq \rv, #UTCR3_TXE 41 42 @ clear top bits, and generate both phys and virt addresses 43 lsl \rp, \rp, #8 44 lsr \rp, \rp, #8 45 orr \rv, \rp, #0xf8000000 @ virtual 46 orr \rp, \rp, #0x80000000 @ physical 47 48 .endm 49 50 .macro senduart,rd,rx 51 str \rd, [\rx, #UTDR] 52 .endm 53 54 .macro waituartcts,rd,rx 55 .endm 56 57 .macro waituarttxrdy,rd,rx 581001: ldr \rd, [\rx, #UTSR1] 59 tst \rd, #UTSR1_TNF 60 beq 1001b 61 .endm 62 63 .macro busyuart,rd,rx 641001: ldr \rd, [\rx, #UTSR1] 65 tst \rd, #UTSR1_TBY 66 bne 1001b 67 .endm 68