xref: /openbmc/linux/arch/arm/include/debug/exynos.S (revision 2f3428b5)
1a2e40710SArnd Bergmann/*
2a2e40710SArnd Bergmann * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
3a2e40710SArnd Bergmann *		http://www.samsung.com
4a2e40710SArnd Bergmann *
5a2e40710SArnd Bergmann * This program is free software; you can redistribute it and/or modify
6a2e40710SArnd Bergmann * it under the terms of the GNU General Public License version 2 as
7a2e40710SArnd Bergmann * published by the Free Software Foundation.
8a2e40710SArnd Bergmann*/
9a2e40710SArnd Bergmann
10a2e40710SArnd Bergmann/* pull in the relevant register and map files. */
11a2e40710SArnd Bergmann
12a2e40710SArnd Bergmann#define S3C_ADDR_BASE   0xF6000000
13a2e40710SArnd Bergmann#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
14a2e40710SArnd Bergmann#define EXYNOS4_PA_UART	0x13800000
15a2e40710SArnd Bergmann#define EXYNOS5_PA_UART	0x12C00000
16a2e40710SArnd Bergmann
17a2e40710SArnd Bergmann	/* note, for the boot process to work we have to keep the UART
18a2e40710SArnd Bergmann	 * virtual address aligned to an 1MiB boundary for the L1
19a2e40710SArnd Bergmann	 * mapping the head code makes. We keep the UART virtual address
20a2e40710SArnd Bergmann	 * aligned and add in the offset when we load the value here.
21a2e40710SArnd Bergmann	 */
22a2e40710SArnd Bergmann
23a2e40710SArnd Bergmann	.macro addruart, rp, rv, tmp
24a2e40710SArnd Bergmann		mrc	p15, 0, \tmp, c0, c0, 0
25a2e40710SArnd Bergmann		and	\tmp, \tmp, #0xf0
26a2e40710SArnd Bergmann		teq	\tmp, #0xf0		@@ A15
272f3428b5SJoonyoung Shim		beq	100f
282f3428b5SJoonyoung Shim		mrc	p15, 0, \tmp, c0, c0, 5
292f3428b5SJoonyoung Shim		and	\tmp, \tmp, #0xf00
302f3428b5SJoonyoung Shim		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
312f3428b5SJoonyoung Shim100:		ldreq	\rp, =EXYNOS5_PA_UART
32a2e40710SArnd Bergmann		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
33a2e40710SArnd Bergmann		ldr	\rv, =S3C_VA_UART
34a2e40710SArnd Bergmann#if CONFIG_DEBUG_S3C_UART != 0
35a2e40710SArnd Bergmann		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
36a2e40710SArnd Bergmann		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
37a2e40710SArnd Bergmann#endif
38a2e40710SArnd Bergmann	.endm
39a2e40710SArnd Bergmann
40a2e40710SArnd Bergmann#define fifo_full fifo_full_s5pv210
41a2e40710SArnd Bergmann#define fifo_level fifo_level_s5pv210
42a2e40710SArnd Bergmann
43a2e40710SArnd Bergmann#include <debug/samsung.S>
44