1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * arch/arm/include/asm/pgtable.h 4 * 5 * Copyright (C) 1995-2002 Russell King 6 */ 7 #ifndef _ASMARM_PGTABLE_H 8 #define _ASMARM_PGTABLE_H 9 10 #include <linux/const.h> 11 #include <asm/proc-fns.h> 12 13 #ifndef __ASSEMBLY__ 14 /* 15 * ZERO_PAGE is a global shared page that is always zero: used 16 * for zero-mapped memory areas etc.. 17 */ 18 extern struct page *empty_zero_page; 19 #define ZERO_PAGE(vaddr) (empty_zero_page) 20 #endif 21 22 #ifndef CONFIG_MMU 23 24 #include <asm-generic/pgtable-nopud.h> 25 #include <asm/pgtable-nommu.h> 26 27 #else 28 29 #include <asm-generic/pgtable-nopud.h> 30 #include <asm/memory.h> 31 #include <asm/pgtable-hwdef.h> 32 33 34 #include <asm/tlbflush.h> 35 36 #ifdef CONFIG_ARM_LPAE 37 #include <asm/pgtable-3level.h> 38 #else 39 #include <asm/pgtable-2level.h> 40 #endif 41 42 /* 43 * Just any arbitrary offset to the start of the vmalloc VM area: the 44 * current 8MB value just means that there will be a 8MB "hole" after the 45 * physical memory until the kernel virtual memory starts. That means that 46 * any out-of-bounds memory accesses will hopefully be caught. 47 * The vmalloc() routines leaves a hole of 4kB between each vmalloced 48 * area for the same reason. ;) 49 */ 50 #define VMALLOC_OFFSET (8*1024*1024) 51 #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) 52 #define VMALLOC_END 0xff800000UL 53 54 #define LIBRARY_TEXT_START 0x0c000000 55 56 #ifndef __ASSEMBLY__ 57 extern void __pte_error(const char *file, int line, pte_t); 58 extern void __pmd_error(const char *file, int line, pmd_t); 59 extern void __pgd_error(const char *file, int line, pgd_t); 60 61 #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte) 62 #define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd) 63 #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd) 64 65 /* 66 * This is the lowest virtual address we can permit any user space 67 * mapping to be mapped at. This is particularly important for 68 * non-high vector CPUs. 69 */ 70 #define FIRST_USER_ADDRESS (PAGE_SIZE * 2) 71 72 /* 73 * Use TASK_SIZE as the ceiling argument for free_pgtables() and 74 * free_pgd_range() to avoid freeing the modules pmd when LPAE is enabled (pmd 75 * page shared between user and kernel). 76 */ 77 #ifdef CONFIG_ARM_LPAE 78 #define USER_PGTABLES_CEILING TASK_SIZE 79 #endif 80 81 /* 82 * The pgprot_* and protection_map entries will be fixed up in runtime 83 * to include the cachable and bufferable bits based on memory policy, 84 * as well as any architecture dependent bits like global/ASID and SMP 85 * shared mapping bits. 86 */ 87 #define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG 88 89 extern pgprot_t pgprot_user; 90 extern pgprot_t pgprot_kernel; 91 92 #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) 93 94 #define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE) 95 #define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN) 96 #define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER) 97 #define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) 98 #define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY) 99 #define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) 100 #define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY) 101 #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) 102 #define PAGE_KERNEL_EXEC pgprot_kernel 103 104 #define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) 105 #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) 106 #define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER) 107 #define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) 108 #define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY) 109 #define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN) 110 #define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY) 111 112 #define __pgprot_modify(prot,mask,bits) \ 113 __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) 114 115 #define pgprot_noncached(prot) \ 116 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) 117 118 #define pgprot_writecombine(prot) \ 119 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) 120 121 #define pgprot_stronglyordered(prot) \ 122 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) 123 124 #define pgprot_device(prot) \ 125 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_SHARED | L_PTE_SHARED | L_PTE_DIRTY | L_PTE_XN) 126 127 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE 128 #define pgprot_dmacoherent(prot) \ 129 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN) 130 #define __HAVE_PHYS_MEM_ACCESS_PROT 131 struct file; 132 extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, 133 unsigned long size, pgprot_t vma_prot); 134 #else 135 #define pgprot_dmacoherent(prot) \ 136 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN) 137 #endif 138 139 #endif /* __ASSEMBLY__ */ 140 141 /* 142 * The table below defines the page protection levels that we insert into our 143 * Linux page table version. These get translated into the best that the 144 * architecture can perform. Note that on most ARM hardware: 145 * 1) We cannot do execute protection 146 * 2) If we could do execute protection, then read is implied 147 * 3) write implies read permissions 148 */ 149 150 #ifndef __ASSEMBLY__ 151 152 extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; 153 154 #define pud_page(pud) pmd_page(__pmd(pud_val(pud))) 155 #define pud_write(pud) pmd_write(__pmd(pud_val(pud))) 156 157 #define pmd_none(pmd) (!pmd_val(pmd)) 158 159 static inline pte_t *pmd_page_vaddr(pmd_t pmd) 160 { 161 return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK); 162 } 163 164 #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) 165 166 #define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) 167 #define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) 168 169 #define pte_page(pte) pfn_to_page(pte_pfn(pte)) 170 #define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot) 171 172 #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) 173 174 #define pte_isset(pte, val) ((u32)(val) == (val) ? pte_val(pte) & (val) \ 175 : !!(pte_val(pte) & (val))) 176 #define pte_isclear(pte, val) (!(pte_val(pte) & (val))) 177 178 #define pte_none(pte) (!pte_val(pte)) 179 #define pte_present(pte) (pte_isset((pte), L_PTE_PRESENT)) 180 #define pte_valid(pte) (pte_isset((pte), L_PTE_VALID)) 181 #define pte_accessible(mm, pte) (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte)) 182 #define pte_write(pte) (pte_isclear((pte), L_PTE_RDONLY)) 183 #define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY)) 184 #define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG)) 185 #define pte_exec(pte) (pte_isclear((pte), L_PTE_XN)) 186 187 #define pte_valid_user(pte) \ 188 (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) 189 190 static inline bool pte_access_permitted(pte_t pte, bool write) 191 { 192 pteval_t mask = L_PTE_PRESENT | L_PTE_USER; 193 pteval_t needed = mask; 194 195 if (write) 196 mask |= L_PTE_RDONLY; 197 198 return (pte_val(pte) & mask) == needed; 199 } 200 #define pte_access_permitted pte_access_permitted 201 202 #if __LINUX_ARM_ARCH__ < 6 203 static inline void __sync_icache_dcache(pte_t pteval) 204 { 205 } 206 #else 207 extern void __sync_icache_dcache(pte_t pteval); 208 #endif 209 210 void set_pte_at(struct mm_struct *mm, unsigned long addr, 211 pte_t *ptep, pte_t pteval); 212 213 static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot) 214 { 215 pte_val(pte) &= ~pgprot_val(prot); 216 return pte; 217 } 218 219 static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot) 220 { 221 pte_val(pte) |= pgprot_val(prot); 222 return pte; 223 } 224 225 static inline pte_t pte_wrprotect(pte_t pte) 226 { 227 return set_pte_bit(pte, __pgprot(L_PTE_RDONLY)); 228 } 229 230 static inline pte_t pte_mkwrite(pte_t pte) 231 { 232 return clear_pte_bit(pte, __pgprot(L_PTE_RDONLY)); 233 } 234 235 static inline pte_t pte_mkclean(pte_t pte) 236 { 237 return clear_pte_bit(pte, __pgprot(L_PTE_DIRTY)); 238 } 239 240 static inline pte_t pte_mkdirty(pte_t pte) 241 { 242 return set_pte_bit(pte, __pgprot(L_PTE_DIRTY)); 243 } 244 245 static inline pte_t pte_mkold(pte_t pte) 246 { 247 return clear_pte_bit(pte, __pgprot(L_PTE_YOUNG)); 248 } 249 250 static inline pte_t pte_mkyoung(pte_t pte) 251 { 252 return set_pte_bit(pte, __pgprot(L_PTE_YOUNG)); 253 } 254 255 static inline pte_t pte_mkexec(pte_t pte) 256 { 257 return clear_pte_bit(pte, __pgprot(L_PTE_XN)); 258 } 259 260 static inline pte_t pte_mknexec(pte_t pte) 261 { 262 return set_pte_bit(pte, __pgprot(L_PTE_XN)); 263 } 264 265 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) 266 { 267 const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER | 268 L_PTE_NONE | L_PTE_VALID; 269 pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); 270 return pte; 271 } 272 273 /* 274 * Encode and decode a swap entry. Swap entries are stored in the Linux 275 * page tables as follows: 276 * 277 * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 278 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 279 * <--------------- offset ------------------------> < type -> 0 0 280 * 281 * This gives us up to 31 swap files and 128GB per swap file. Note that 282 * the offset field is always non-zero. 283 */ 284 #define __SWP_TYPE_SHIFT 2 285 #define __SWP_TYPE_BITS 5 286 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) 287 #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) 288 289 #define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK) 290 #define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) 291 #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) }) 292 293 #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) 294 #define __swp_entry_to_pte(swp) __pte((swp).val | PTE_TYPE_FAULT) 295 296 /* 297 * It is an error for the kernel to have more swap files than we can 298 * encode in the PTEs. This ensures that we know when MAX_SWAPFILES 299 * is increased beyond what we presently support. 300 */ 301 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) 302 303 /* 304 * We provide our own arch_get_unmapped_area to cope with VIPT caches. 305 */ 306 #define HAVE_ARCH_UNMAPPED_AREA 307 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN 308 309 #endif /* !__ASSEMBLY__ */ 310 311 #endif /* CONFIG_MMU */ 312 313 #endif /* _ASMARM_PGTABLE_H */ 314