1 /* 2 * arch/arm/include/asm/assembler.h 3 * 4 * Copyright (C) 1996-2000 Russell King 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This file contains arm architecture specific defines 11 * for the different processors. 12 * 13 * Do not include any C declarations in this file - it is included by 14 * assembler source. 15 */ 16 #ifndef __ASSEMBLY__ 17 #error "Only include this from assembly code" 18 #endif 19 20 #include <asm/ptrace.h> 21 22 /* 23 * Endian independent macros for shifting bytes within registers. 24 */ 25 #ifndef __ARMEB__ 26 #define pull lsr 27 #define push lsl 28 #define get_byte_0 lsl #0 29 #define get_byte_1 lsr #8 30 #define get_byte_2 lsr #16 31 #define get_byte_3 lsr #24 32 #define put_byte_0 lsl #0 33 #define put_byte_1 lsl #8 34 #define put_byte_2 lsl #16 35 #define put_byte_3 lsl #24 36 #else 37 #define pull lsl 38 #define push lsr 39 #define get_byte_0 lsr #24 40 #define get_byte_1 lsr #16 41 #define get_byte_2 lsr #8 42 #define get_byte_3 lsl #0 43 #define put_byte_0 lsl #24 44 #define put_byte_1 lsl #16 45 #define put_byte_2 lsl #8 46 #define put_byte_3 lsl #0 47 #endif 48 49 /* 50 * Data preload for architectures that support it 51 */ 52 #if __LINUX_ARM_ARCH__ >= 5 53 #define PLD(code...) code 54 #else 55 #define PLD(code...) 56 #endif 57 58 /* 59 * This can be used to enable code to cacheline align the destination 60 * pointer when bulk writing to memory. Experiments on StrongARM and 61 * XScale didn't show this a worthwhile thing to do when the cache is not 62 * set to write-allocate (this would need further testing on XScale when WA 63 * is used). 64 * 65 * On Feroceon there is much to gain however, regardless of cache mode. 66 */ 67 #ifdef CONFIG_CPU_FEROCEON 68 #define CALGN(code...) code 69 #else 70 #define CALGN(code...) 71 #endif 72 73 /* 74 * Enable and disable interrupts 75 */ 76 #if __LINUX_ARM_ARCH__ >= 6 77 .macro disable_irq_notrace 78 cpsid i 79 .endm 80 81 .macro enable_irq_notrace 82 cpsie i 83 .endm 84 #else 85 .macro disable_irq_notrace 86 msr cpsr_c, #PSR_I_BIT | SVC_MODE 87 .endm 88 89 .macro enable_irq_notrace 90 msr cpsr_c, #SVC_MODE 91 .endm 92 #endif 93 94 .macro asm_trace_hardirqs_off 95 #if defined(CONFIG_TRACE_IRQFLAGS) 96 stmdb sp!, {r0-r3, ip, lr} 97 bl trace_hardirqs_off 98 ldmia sp!, {r0-r3, ip, lr} 99 #endif 100 .endm 101 102 .macro asm_trace_hardirqs_on_cond, cond 103 #if defined(CONFIG_TRACE_IRQFLAGS) 104 /* 105 * actually the registers should be pushed and pop'd conditionally, but 106 * after bl the flags are certainly clobbered 107 */ 108 stmdb sp!, {r0-r3, ip, lr} 109 bl\cond trace_hardirqs_on 110 ldmia sp!, {r0-r3, ip, lr} 111 #endif 112 .endm 113 114 .macro asm_trace_hardirqs_on 115 asm_trace_hardirqs_on_cond al 116 .endm 117 118 .macro disable_irq 119 disable_irq_notrace 120 asm_trace_hardirqs_off 121 .endm 122 123 .macro enable_irq 124 asm_trace_hardirqs_on 125 enable_irq_notrace 126 .endm 127 /* 128 * Save the current IRQ state and disable IRQs. Note that this macro 129 * assumes FIQs are enabled, and that the processor is in SVC mode. 130 */ 131 .macro save_and_disable_irqs, oldcpsr 132 mrs \oldcpsr, cpsr 133 disable_irq 134 .endm 135 136 /* 137 * Restore interrupt state previously stored in a register. We don't 138 * guarantee that this will preserve the flags. 139 */ 140 .macro restore_irqs_notrace, oldcpsr 141 msr cpsr_c, \oldcpsr 142 .endm 143 144 .macro restore_irqs, oldcpsr 145 tst \oldcpsr, #PSR_I_BIT 146 asm_trace_hardirqs_on_cond eq 147 restore_irqs_notrace \oldcpsr 148 .endm 149 150 #define USER(x...) \ 151 9999: x; \ 152 .pushsection __ex_table,"a"; \ 153 .align 3; \ 154 .long 9999b,9001f; \ 155 .popsection 156 157 #ifdef CONFIG_SMP 158 #define ALT_SMP(instr...) \ 159 9998: instr 160 #define ALT_UP(instr...) \ 161 .pushsection ".alt.smp.init", "a" ;\ 162 .long 9998b ;\ 163 instr ;\ 164 .popsection 165 #define ALT_UP_B(label) \ 166 .equ up_b_offset, label - 9998b ;\ 167 .pushsection ".alt.smp.init", "a" ;\ 168 .long 9998b ;\ 169 b . + up_b_offset ;\ 170 .popsection 171 #else 172 #define ALT_SMP(instr...) 173 #define ALT_UP(instr...) instr 174 #define ALT_UP_B(label) b label 175 #endif 176 177 /* 178 * SMP data memory barrier 179 */ 180 .macro smp_dmb 181 #ifdef CONFIG_SMP 182 #if __LINUX_ARM_ARCH__ >= 7 183 ALT_SMP(dmb) 184 #elif __LINUX_ARM_ARCH__ == 6 185 ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb 186 #else 187 #error Incompatible SMP platform 188 #endif 189 ALT_UP(nop) 190 #endif 191 .endm 192 193 #ifdef CONFIG_THUMB2_KERNEL 194 .macro setmode, mode, reg 195 mov \reg, #\mode 196 msr cpsr_c, \reg 197 .endm 198 #else 199 .macro setmode, mode, reg 200 msr cpsr_c, #\mode 201 .endm 202 #endif 203 204 /* 205 * STRT/LDRT access macros with ARM and Thumb-2 variants 206 */ 207 #ifdef CONFIG_THUMB2_KERNEL 208 209 .macro usraccoff, instr, reg, ptr, inc, off, cond, abort 210 9999: 211 .if \inc == 1 212 \instr\cond\()bt \reg, [\ptr, #\off] 213 .elseif \inc == 4 214 \instr\cond\()t \reg, [\ptr, #\off] 215 .else 216 .error "Unsupported inc macro argument" 217 .endif 218 219 .pushsection __ex_table,"a" 220 .align 3 221 .long 9999b, \abort 222 .popsection 223 .endm 224 225 .macro usracc, instr, reg, ptr, inc, cond, rept, abort 226 @ explicit IT instruction needed because of the label 227 @ introduced by the USER macro 228 .ifnc \cond,al 229 .if \rept == 1 230 itt \cond 231 .elseif \rept == 2 232 ittt \cond 233 .else 234 .error "Unsupported rept macro argument" 235 .endif 236 .endif 237 238 @ Slightly optimised to avoid incrementing the pointer twice 239 usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort 240 .if \rept == 2 241 usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort 242 .endif 243 244 add\cond \ptr, #\rept * \inc 245 .endm 246 247 #else /* !CONFIG_THUMB2_KERNEL */ 248 249 .macro usracc, instr, reg, ptr, inc, cond, rept, abort 250 .rept \rept 251 9999: 252 .if \inc == 1 253 \instr\cond\()bt \reg, [\ptr], #\inc 254 .elseif \inc == 4 255 \instr\cond\()t \reg, [\ptr], #\inc 256 .else 257 .error "Unsupported inc macro argument" 258 .endif 259 260 .pushsection __ex_table,"a" 261 .align 3 262 .long 9999b, \abort 263 .popsection 264 .endr 265 .endm 266 267 #endif /* CONFIG_THUMB2_KERNEL */ 268 269 .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f 270 usracc str, \reg, \ptr, \inc, \cond, \rept, \abort 271 .endm 272 273 .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f 274 usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort 275 .endm 276