1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Common support for CompuLab CM-T3x CoMs
4 */
5
6/ {
7
8	memory@80000000 {
9		device_type = "memory";
10		reg = <0x80000000 0x10000000>; /* 256 MB */
11	};
12
13	leds {
14		compatible = "gpio-leds";
15		pinctrl-names = "default";
16		pinctrl-0 = <&green_led_pins>;
17		ledb {
18			label = "cm-t3x:green";
19			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
20			linux,default-trigger = "heartbeat";
21		};
22	};
23
24	/* HS USB Port 1 Power */
25	hsusb1_power: hsusb1_power_reg {
26		compatible = "regulator-fixed";
27		regulator-name = "hsusb1_vbus";
28		regulator-min-microvolt = <3300000>;
29		regulator-max-microvolt = <3300000>;
30		startup-delay-us = <70000>;
31	};
32
33	/* HS USB Port 2 Power */
34	hsusb2_power: hsusb2_power_reg {
35		compatible = "regulator-fixed";
36		regulator-name = "hsusb2_vbus";
37		regulator-min-microvolt = <3300000>;
38		regulator-max-microvolt = <3300000>;
39		startup-delay-us = <70000>;
40	};
41
42	/* HS USB Host PHY on PORT 1 */
43	hsusb1_phy: hsusb1_phy {
44		compatible = "usb-nop-xceiv";
45		vcc-supply = <&hsusb1_power>;
46		#phy-cells = <0>;
47	};
48
49	/* HS USB Host PHY on PORT 2 */
50	hsusb2_phy: hsusb2-phy-pins {
51		compatible = "usb-nop-xceiv";
52		vcc-supply = <&hsusb2_power>;
53		#phy-cells = <0>;
54	};
55
56	ads7846reg: ads7846-reg {
57		compatible = "regulator-fixed";
58		regulator-name = "ads7846-reg";
59		regulator-min-microvolt = <3300000>;
60		regulator-max-microvolt = <3300000>;
61	};
62
63	tv0: svideo-connector {
64		compatible = "svideo-connector";
65		label = "tv";
66
67		port {
68			tv_connector_in: endpoint {
69				remote-endpoint = <&venc_out>;
70			};
71		};
72	};
73};
74
75&omap3_pmx_core {
76
77	uart3_pins: uart3-pins {
78		pinctrl-single,pins = <
79			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
80			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
81		>;
82	};
83
84	mmc1_pins: mmc1-pins {
85		pinctrl-single,pins = <
86			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
87			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
88			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
89			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
90			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
91			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
92		>;
93	};
94
95	green_led_pins: green-led-pins {
96		pinctrl-single,pins = <
97			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
98		>;
99	};
100
101	dss_dpi_pins_common: dss-dpi-common-pins {
102		pinctrl-single,pins = <
103			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
104			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
105			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
106			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
107
108			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
109			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
110			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
111			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
112			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
113			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
114			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
115			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
116			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
117			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
118			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
119			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
120			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
121			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
122			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
123			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
124			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
125			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
126		>;
127	};
128
129	dss_dpi_pins_cm_t35x: dss-dpi-cm-t35x-pins {
130		pinctrl-single,pins = <
131			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
132			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
133			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
134			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
135			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
136			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
137		>;
138	};
139
140	ads7846_pins: ads7846-pins {
141		pinctrl-single,pins = <
142			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
143		>;
144	};
145
146	mcspi1_pins: mcspi1-pins {
147		pinctrl-single,pins = <
148			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
149			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
150			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
151			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
152		>;
153	};
154
155	i2c1_pins: i2c1-pins {
156		pinctrl-single,pins = <
157			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
158			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
159		>;
160	};
161
162	mcbsp2_pins: mcbsp2-pins {
163		pinctrl-single,pins = <
164			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
165			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
166			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr */
167			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx */
168		>;
169	};
170};
171
172&uart3 {
173	pinctrl-names = "default";
174	pinctrl-0 = <&uart3_pins>;
175};
176
177&mmc1 {
178	pinctrl-names = "default";
179	pinctrl-0 = <&mmc1_pins>;
180	bus-width = <4>;
181};
182
183&mmc3 {
184	status = "disabled";
185};
186
187&i2c1 {
188	pinctrl-names = "default";
189	pinctrl-0 = <&i2c1_pins>;
190
191	clock-frequency = <400000>;
192
193	at24@50 {
194		compatible = "atmel,24c02";
195		pagesize = <16>;
196		reg = <0x50>;
197	};
198};
199
200&i2c3 {
201	clock-frequency = <400000>;
202};
203
204&usbhshost {
205	port1-mode = "ehci-phy";
206	port2-mode = "ehci-phy";
207};
208
209&usbhsehci {
210	phys = <&hsusb1_phy &hsusb2_phy>;
211};
212
213&mcspi1 {
214	pinctrl-names = "default";
215	pinctrl-0 = <&mcspi1_pins>;
216
217	/* touch controller */
218	ads7846@0 {
219		pinctrl-names = "default";
220		pinctrl-0 = <&ads7846_pins>;
221
222		compatible = "ti,ads7846";
223		vcc-supply = <&ads7846reg>;
224
225		reg = <0>;			/* CS0 */
226		spi-max-frequency = <1500000>;
227
228		interrupt-parent = <&gpio2>;
229		interrupts = <25 0>;		/* gpio_57 */
230		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
231
232		ti,x-min = /bits/ 16 <0x0>;
233		ti,x-max = /bits/ 16 <0x0fff>;
234		ti,y-min = /bits/ 16 <0x0>;
235		ti,y-max = /bits/ 16 <0x0fff>;
236
237		ti,x-plate-ohms = /bits/ 16 <180>;
238		ti,pressure-max = /bits/ 16 <255>;
239
240		ti,debounce-max = /bits/ 16 <30>;
241		ti,debounce-tol = /bits/ 16 <10>;
242		ti,debounce-rep = /bits/ 16 <1>;
243
244		wakeup-source;
245	};
246};
247
248&venc {
249	status = "okay";
250
251	port {
252		venc_out: endpoint {
253			remote-endpoint = <&tv_connector_in>;
254			ti,channels = <2>;
255		};
256	};
257};
258
259&mcbsp2 {
260	status = "okay";
261
262	pinctrl-names = "default";
263	pinctrl-0 = <&mcbsp2_pins>;
264};
265
266&gpmc {
267	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
268
269	nand@0,0 {
270		compatible = "ti,omap2-nand";
271		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
272		interrupt-parent = <&gpmc>;
273		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
274			     <1 IRQ_TYPE_NONE>;	/* termcount */
275		nand-bus-width = <8>;
276		gpmc,device-width = <1>;
277		ti,nand-ecc-opt = "sw";
278
279		gpmc,cs-on-ns = <0>;
280		gpmc,cs-rd-off-ns = <120>;
281		gpmc,cs-wr-off-ns = <120>;
282
283		gpmc,adv-on-ns = <0>;
284		gpmc,adv-rd-off-ns = <120>;
285		gpmc,adv-wr-off-ns = <120>;
286
287		gpmc,we-on-ns = <6>;
288		gpmc,we-off-ns = <90>;
289
290		gpmc,oe-on-ns = <6>;
291		gpmc,oe-off-ns = <90>;
292
293		gpmc,page-burst-access-ns = <6>;
294		gpmc,access-ns = <72>;
295		gpmc,cycle2cycle-delay-ns = <60>;
296
297		gpmc,rd-cycle-ns = <120>;
298		gpmc,wr-cycle-ns = <120>;
299		gpmc,wr-access-ns = <186>;
300		gpmc,wr-data-mux-bus-ns = <90>;
301
302		#address-cells = <1>;
303		#size-cells = <1>;
304
305		partition@0 {
306			label = "xloader";
307			reg = <0 0x80000>;
308		};
309		partition@80000 {
310			label = "uboot";
311			reg = <0x80000 0x1e0000>;
312		};
313		partition@260000 {
314			label = "uboot environment";
315			reg = <0x260000 0x40000>;
316		};
317		partition@2a0000 {
318			label = "linux";
319			reg = <0x2a0000 0x400000>;
320		};
321		partition@6a0000 {
322			label = "rootfs";
323			reg = <0x6a0000 0x1f880000>;
324		};
325	};
326};
327