1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/*
7 * VScom OnRISC
8 * http://www.vscom.de
9 */
10
11/dts-v1/;
12
13#include "am335x-baltos.dtsi"
14#include "am335x-baltos-leds.dtsi"
15
16/ {
17	model = "NetCom Plus";
18};
19
20&am33xx_pinmux {
21	uart1_pins: uart1-pins {
22		pinctrl-single,pins = <
23			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
24			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
25			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
26			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
27			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
28			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
29			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
30			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
31		>;
32	};
33
34	uart2_pins: uart2-pins {
35		pinctrl-single,pins = <
36			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
37			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
38			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
39			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
40			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
41			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
42			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
43			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
44		>;
45	};
46};
47
48&usb0_phy {
49	status = "okay";
50};
51
52&usb0 {
53	status = "okay";
54	dr_mode = "host";
55};
56
57&uart1 {
58	pinctrl-names = "default";
59	pinctrl-0 = <&uart1_pins>;
60	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
61	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
62	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
63	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
64
65	status = "okay";
66};
67
68&uart2 {
69	pinctrl-names = "default";
70	pinctrl-0 = <&uart2_pins>;
71	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
72	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
73	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
74	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
75
76	status = "okay";
77};
78
79&davinci_mdio_sw {
80	phy0: ethernet-phy@0 {
81		reg = <1>;
82	};
83};
84
85&cpsw_port1 {
86	phy-mode = "rmii";
87	ti,dual-emac-pvid = <1>;
88	phy-handle = <&phy0>;
89};
90
91&cpsw_port2 {
92	phy-mode = "rgmii-id";
93	ti,dual-emac-pvid = <2>;
94	phy-handle = <&phy1>;
95};
96
97&gpio0 {
98	gpio-line-names =
99		"MDIO",
100		"MDC",
101		"UART2_RX",
102		"UART2_TX",
103		"I2C1_SDA",
104		"I2C1_SCL",
105		"NC",
106		"NC",
107		"NC",
108		"NC",
109		"NC",
110		"NC",
111		"UART1_CTSN",
112		"UART1_RTSN",
113		"UART1_RX",
114		"UART1_TX",
115		"onrisc:blue:wlan",
116		"onrisc:green:app",
117		"USB0_DRVVBUS",
118		"ETH2_INT",
119		"NC",
120		"NC",
121		"MMC1_DAT0",
122		"MMC1_DAT1",
123		"NC",
124		"NC",
125		"MMC1_DAT2",
126		"MMC1_DAT3",
127		"NC",
128		"NC",
129		"GPMC_WAIT0",
130		"GPMC_WP_N";
131};
132
133&gpio1 {
134	gpio-line-names =
135		"GPMC_AD0",
136		"GPMC_AD1",
137		"GPMC_AD2",
138		"GPMC_AD3",
139		"GPMC_AD4",
140		"GPMC_AD5",
141		"GPMC_AD6",
142		"GPMC_AD7",
143		"NC",
144		"NC",
145		"CONSOLE_RX",
146		"CONSOLE_TX",
147		"UART2_DTR",
148		"UART2_DSR",
149		"UART2_DCD",
150		"UART2_RI",
151		"RGMII2_TCTL",
152		"RGMII2_RCTL",
153		"RGMII2_TD3",
154		"RGMII2_TD2",
155		"RGMII2_TD1",
156		"RGMII2_TD0",
157		"RGMII2_TCLK",
158		"RGMII2_RCLK",
159		"RGMII2_RD3",
160		"RGMII2_RD2",
161		"RGMII2_RD1",
162		"RGMII2_RD0",
163		"PMIC_INT1",
164		"GPMC_CSN0_Flash",
165		"MMC1_CLK",
166		"MMC1_CMD";
167};
168
169&gpio2 {
170	gpio-line-names =
171		"GPMC_CSN3_BUS",
172		"GPMC_CLK",
173		"GPMC_ADVN_ALE",
174		"GPMC_OEN_RE_N",
175		"GPMC_WE_N",
176		"GPMC_BEN0_CLE",
177		"NC",
178		"NC",
179		"NC",
180		"NC",
181		"NC",
182		"NC",
183		"NC",
184		"NC",
185		"NC",
186		"NC",
187		"NC",
188		"NC",
189		"SW2_0",
190		"SW2_1",
191		"NC",
192		"NC",
193		"UART1_DTR",
194		"UART1_DSR",
195		"UART1_DCD",
196		"UART1_RI",
197		"MMC0_DAT3",
198		"MMC0_DAT2",
199		"MMC0_DAT1",
200		"MMC0_DAT0",
201		"MMC0_CLK",
202		"MMC0_CMD";
203};
204
205&gpio3 {
206	gpio-line-names =
207		"onrisc:red:power",
208		"NC",
209		"NC",
210		"NC",
211		"NC",
212		"UART2_CTSN",
213		"UART2_RTSN",
214		"WLAN_IRQ",
215		"WLAN_EN",
216		"SW2_2",
217		"SW2_3",
218		"NC",
219		"NC",
220		"NC",
221		"ModeA0",
222		"ModeA1",
223		"ModeA2",
224		"ModeA3",
225		"NC",
226		"NC",
227		"NC",
228		"NC",
229		"NC",
230		"NC",
231		"NC",
232		"NC",
233		"NC",
234		"NC",
235		"NC",
236		"NC",
237		"NC",
238		"NC";
239};
240