1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6#include <dt-bindings/display/tda998x.h>
7#include <dt-bindings/interrupt-controller/irq.h>
8
9&am33xx_pinmux {
10	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
11		pinctrl-single,pins = <
12			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
13			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
14			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
15			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
16			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
17			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
18			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
19			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
20			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
21			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
22			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
23			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
24			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
25			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
26			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
27			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
28			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
29			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
30			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
31			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
32			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
33		>;
34	};
35
36	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
37		pinctrl-single,pins = <
38			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
39		>;
40	};
41
42	mcasp0_pins: mcasp0-pins {
43		pinctrl-single,pins = <
44			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
45			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
46			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
47			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
48			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
49		>;
50	};
51};
52
53&lcdc {
54	status = "okay";
55
56	/* If you want to get 24 bit RGB and 16 BGR mode instead of
57	 * current 16 bit RGB and 24 BGR modes, set the propety
58	 * below to "crossed" and uncomment the video-ports -property
59	 * in tda19988 node.
60	 */
61	blue-and-red-wiring = "straight";
62
63	port {
64		lcdc_0: endpoint@0 {
65			remote-endpoint = <&hdmi_0>;
66		};
67	};
68};
69
70&i2c0 {
71	tda19988: tda19988@70 {
72		compatible = "nxp,tda998x";
73		reg = <0x70>;
74		nxp,calib-gpios = <&gpio1 25 0>;
75		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
76
77		pinctrl-names = "default", "off";
78		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
79		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
80
81		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
82		/* video-ports = <0x234501>; */
83
84		#sound-dai-cells = <0>;
85		audio-ports = <	TDA998x_I2S	0x03>;
86
87		ports {
88			#address-cells = <1>;
89			#size-cells = <0>;
90
91			port@0 {
92				reg = <0>;
93
94				hdmi_0: endpoint {
95					remote-endpoint = <&lcdc_0>;
96				};
97			};
98		};
99	};
100};
101
102&mcasp0	{
103	#sound-dai-cells = <0>;
104	pinctrl-names = "default";
105	pinctrl-0 = <&mcasp0_pins>;
106	status = "okay";
107	op-mode = <0>;	/* MCASP_IIS_MODE */
108	tdm-slots = <2>;
109	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
110			0 0 1 0
111		>;
112	tx-num-evt = <32>;
113	rx-num-evt = <32>;
114};
115
116/ {
117	clk_mcasp0_fixed: clk_mcasp0_fixed {
118		#clock-cells = <0>;
119		compatible = "fixed-clock";
120		clock-frequency = <24576000>;
121	};
122
123	clk_mcasp0: clk_mcasp0 {
124		#clock-cells = <0>;
125		compatible = "gpio-gate-clock";
126		clocks = <&clk_mcasp0_fixed>;
127		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
128	};
129
130	sound {
131		compatible = "simple-audio-card";
132		simple-audio-card,name = "TI BeagleBone Black";
133		simple-audio-card,format = "i2s";
134		simple-audio-card,bitclock-master = <&dailink0_master>;
135		simple-audio-card,frame-master = <&dailink0_master>;
136
137		dailink0_master: simple-audio-card,cpu {
138			sound-dai = <&mcasp0>;
139			clocks = <&clk_mcasp0>;
140		};
141
142		simple-audio-card,codec {
143			sound-dai = <&tda19988>;
144		};
145	};
146};
147