1// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
2/*
3 * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
4 * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
5 * Copyright (C) 2020 Marek Vasut <marex@denx.de>
6 */
7
8#include "stm32mp15-pinctrl.dtsi"
9#include "stm32mp15xxac-pinctrl.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/mfd/st,stpmic1.h>
12
13/ {
14	aliases {
15		spi0 = &qspi;
16	};
17
18	memory@c0000000 {
19		device_type = "memory";
20		reg = <0xc0000000 0x40000000>;
21	};
22
23	reserved-memory {
24		#address-cells = <1>;
25		#size-cells = <1>;
26		ranges;
27
28		mcuram2: mcuram2@10000000 {
29			compatible = "shared-dma-pool";
30			reg = <0x10000000 0x40000>;
31			no-map;
32		};
33
34		vdev0vring0: vdev0vring0@10040000 {
35			compatible = "shared-dma-pool";
36			reg = <0x10040000 0x1000>;
37			no-map;
38		};
39
40		vdev0vring1: vdev0vring1@10041000 {
41			compatible = "shared-dma-pool";
42			reg = <0x10041000 0x1000>;
43			no-map;
44		};
45
46		vdev0buffer: vdev0buffer@10042000 {
47			compatible = "shared-dma-pool";
48			reg = <0x10042000 0x4000>;
49			no-map;
50		};
51
52		mcuram: mcuram@30000000 {
53			compatible = "shared-dma-pool";
54			reg = <0x30000000 0x40000>;
55			no-map;
56		};
57
58		retram: retram@38000000 {
59			compatible = "shared-dma-pool";
60			reg = <0x38000000 0x10000>;
61			no-map;
62		};
63	};
64};
65
66&crc1 {
67	status = "okay";
68};
69
70&dts {
71	status = "okay";
72};
73
74&i2c4 {
75	pinctrl-names = "default";
76	pinctrl-0 = <&i2c4_pins_a>;
77	i2c-scl-rising-time-ns = <185>;
78	i2c-scl-falling-time-ns = <20>;
79	status = "okay";
80	/delete-property/dmas;
81	/delete-property/dma-names;
82
83	pmic: stpmic@33 {
84		compatible = "st,stpmic1";
85		reg = <0x33>;
86		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
87		interrupt-controller;
88		#interrupt-cells = <2>;
89		status = "okay";
90
91		regulators {
92			compatible = "st,stpmic1-regulators";
93
94			ldo1-supply = <&v3v3>;
95			ldo2-supply = <&v3v3>;
96			ldo3-supply = <&vdd_ddr>;
97			ldo5-supply = <&v3v3>;
98			ldo6-supply = <&v3v3>;
99			pwr_sw1-supply = <&bst_out>;
100			pwr_sw2-supply = <&bst_out>;
101
102			vddcore: buck1 {
103				regulator-name = "vddcore";
104				regulator-min-microvolt = <1200000>;
105				regulator-max-microvolt = <1350000>;
106				regulator-always-on;
107				regulator-initial-mode = <0>;
108				regulator-over-current-protection;
109			};
110
111			vdd_ddr: buck2 {
112				regulator-name = "vdd_ddr";
113				regulator-min-microvolt = <1350000>;
114				regulator-max-microvolt = <1350000>;
115				regulator-always-on;
116				regulator-initial-mode = <0>;
117				regulator-over-current-protection;
118			};
119
120			vdd: buck3 {
121				regulator-name = "vdd";
122				regulator-min-microvolt = <3300000>;
123				regulator-max-microvolt = <3300000>;
124				regulator-always-on;
125				regulator-initial-mode = <0>;
126				regulator-over-current-protection;
127			};
128
129			v3v3: buck4 {
130				regulator-name = "v3v3";
131				regulator-min-microvolt = <3300000>;
132				regulator-max-microvolt = <3300000>;
133				regulator-always-on;
134				regulator-over-current-protection;
135				regulator-initial-mode = <0>;
136			};
137
138			vdda: ldo1 {
139				regulator-name = "vdda";
140				regulator-min-microvolt = <2900000>;
141				regulator-max-microvolt = <2900000>;
142				interrupts = <IT_CURLIM_LDO1 0>;
143			};
144
145			v2v8: ldo2 {
146				regulator-name = "v2v8";
147				regulator-min-microvolt = <2800000>;
148				regulator-max-microvolt = <2800000>;
149				interrupts = <IT_CURLIM_LDO2 0>;
150			};
151
152			vtt_ddr: ldo3 {
153				regulator-name = "vtt_ddr";
154				regulator-min-microvolt = <500000>;
155				regulator-max-microvolt = <750000>;
156				regulator-always-on;
157				regulator-over-current-protection;
158			};
159
160			vdd_usb: ldo4 {
161				regulator-name = "vdd_usb";
162				interrupts = <IT_CURLIM_LDO4 0>;
163			};
164
165			vdd_sd: ldo5 {
166				regulator-name = "vdd_sd";
167				regulator-min-microvolt = <2900000>;
168				regulator-max-microvolt = <2900000>;
169				interrupts = <IT_CURLIM_LDO5 0>;
170				regulator-boot-on;
171			};
172
173			v1v8: ldo6 {
174				regulator-name = "v1v8";
175				regulator-min-microvolt = <1800000>;
176				regulator-max-microvolt = <1800000>;
177				interrupts = <IT_CURLIM_LDO6 0>;
178				regulator-enable-ramp-delay = <300000>;
179			};
180
181			vref_ddr: vref_ddr {
182				regulator-name = "vref_ddr";
183				regulator-always-on;
184			};
185
186			bst_out: boost {
187				regulator-name = "bst_out";
188				interrupts = <IT_OCP_BOOST 0>;
189			};
190
191			vbus_otg: pwr_sw1 {
192				regulator-name = "vbus_otg";
193				interrupts = <IT_OCP_OTG 0>;
194				regulator-active-discharge = <1>;
195			};
196
197			vbus_sw: pwr_sw2 {
198				regulator-name = "vbus_sw";
199				interrupts = <IT_OCP_SWOUT 0>;
200				regulator-active-discharge = <1>;
201			};
202		};
203
204		onkey {
205			compatible = "st,stpmic1-onkey";
206			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
207			interrupt-names = "onkey-falling", "onkey-rising";
208			status = "okay";
209		};
210
211		watchdog {
212			compatible = "st,stpmic1-wdt";
213			status = "disabled";
214		};
215	};
216};
217
218&ipcc {
219	status = "okay";
220};
221
222&iwdg2 {
223	timeout-sec = <32>;
224	status = "okay";
225};
226
227&m4_rproc {
228	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
229			<&vdev0vring1>, <&vdev0buffer>;
230	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
231	mbox-names = "vq0", "vq1", "shutdown", "detach";
232	interrupt-parent = <&exti>;
233	interrupts = <68 1>;
234	status = "okay";
235};
236
237&pwr_regulators {
238	vdd-supply = <&vdd>;
239	vdd_3v3_usbfs-supply = <&vdd_usb>;
240};
241
242&qspi {
243	pinctrl-names = "default", "sleep";
244	pinctrl-0 = <&qspi_clk_pins_a
245		     &qspi_bk1_pins_a
246		     &qspi_cs1_pins_a>;
247	pinctrl-1 = <&qspi_clk_sleep_pins_a
248		     &qspi_bk1_sleep_pins_a
249		     &qspi_cs1_sleep_pins_a>;
250	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
251	#address-cells = <1>;
252	#size-cells = <0>;
253	status = "okay";
254
255	flash0: flash@0 {
256		compatible = "jedec,spi-nor";
257		reg = <0>;
258		spi-rx-bus-width = <4>;
259		spi-max-frequency = <50000000>;
260		#address-cells = <1>;
261		#size-cells = <1>;
262	};
263};
264
265&rng1 {
266	status = "okay";
267};
268
269&rtc {
270	status = "okay";
271};
272