1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) Protonic Holland
4 * Author: David Jander <david@protonic.nl>
5 */
6/dts-v1/;
7
8#include "stm32mp151a-prtt1l.dtsi"
9
10/ {
11	model = "Protonic PRTT1C";
12	compatible = "prt,prtt1c", "st,stm32mp151";
13
14	clock_ksz9031: clock-ksz9031 {
15		compatible = "fixed-clock";
16		#clock-cells = <0>;
17		clock-frequency = <25000000>;
18	};
19
20	clock_sja1105: clock-sja1105 {
21		compatible = "fixed-clock";
22		#clock-cells = <0>;
23		clock-frequency = <25000000>;
24	};
25
26	pse_t1l1: ethernet-pse-1 {
27		compatible = "podl-pse-regulator";
28		pse-supply = <&reg_t1l1>;
29		#pse-cells = <0>;
30	};
31
32	pse_t1l2: ethernet-pse-2 {
33		compatible = "podl-pse-regulator";
34		pse-supply = <&reg_t1l2>;
35		#pse-cells = <0>;
36	};
37
38	mdio0: mdio {
39		compatible = "virtual,mdio-gpio";
40		#address-cells = <1>;
41		#size-cells = <0>;
42		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
43			 &gpioa 2 GPIO_ACTIVE_HIGH>;
44
45	};
46
47	reg_t1l1: regulator-pse-t1l1 {
48		compatible = "regulator-fixed";
49		regulator-name = "pse-t1l1";
50		regulator-min-microvolt = <12000000>;
51		regulator-max-microvolt = <12000000>;
52		gpio = <&gpiog 13 GPIO_ACTIVE_HIGH>;
53		enable-active-high;
54	};
55
56	reg_t1l2: regulator-pse-t1l2 {
57		compatible = "regulator-fixed";
58		regulator-name = "pse-t1l2";
59		regulator-min-microvolt = <12000000>;
60		regulator-max-microvolt = <12000000>;
61		gpio = <&gpiog 14 GPIO_ACTIVE_HIGH>;
62		enable-active-high;
63	};
64
65	wifi_pwrseq: wifi-pwrseq {
66		compatible = "mmc-pwrseq-simple";
67		reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
68	};
69};
70
71&ethernet0 {
72	fixed-link {
73		speed = <100>;
74		full-duplex;
75	};
76};
77
78&gpioa {
79	gpio-line-names =
80		"", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
81		"", "", "", "", "", "", "", "SPI1_nSS";
82};
83
84&gpiod {
85	gpio-line-names =
86		"", "", "", "", "", "", "", "",
87		"WFM_RESET", "", "", "", "", "", "", "";
88};
89
90&gpioe {
91	gpio-line-names =
92		"SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
93		"", "", "", "", "WFM_nIRQ", "", "", "";
94};
95
96&gpiog {
97	gpio-line-names =
98		"", "", "", "", "", "", "", "PHY3_nINT",
99		"PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
100		"PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
101};
102
103&mdio0 {
104	/* All this DP83TD510E PHYs can't be probed before switch@0 is
105	 * probed so we need to use compatible with PHYid
106	 */
107	/* TI DP83TD510E */
108	t1l0_phy: ethernet-phy@6 {
109		compatible = "ethernet-phy-id2000.0181";
110		reg = <6>;
111		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
112		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
113		reset-assert-us = <10>;
114		reset-deassert-us = <35>;
115	};
116
117	/* TI DP83TD510E */
118	t1l1_phy: ethernet-phy@7 {
119		compatible = "ethernet-phy-id2000.0181";
120		reg = <7>;
121		interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
122		reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
123		reset-assert-us = <10>;
124		reset-deassert-us = <35>;
125		pses = <&pse_t1l1>;
126	};
127
128	/* TI DP83TD510E */
129	t1l2_phy: ethernet-phy@10 {
130		compatible = "ethernet-phy-id2000.0181";
131		reg = <10>;
132		interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
133		reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
134		reset-assert-us = <10>;
135		reset-deassert-us = <35>;
136		pses = <&pse_t1l2>;
137	};
138
139	/* Micrel KSZ9031 */
140	rj45_phy: ethernet-phy@2 {
141		reg = <2>;
142		interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
143		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
144		reset-assert-us = <10000>;
145		reset-deassert-us = <1000>;
146
147		clocks = <&clock_ksz9031>;
148	};
149};
150
151&qspi {
152	status = "disabled";
153};
154
155&sdmmc2 {
156	pinctrl-names = "default", "opendrain", "sleep";
157	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
158	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
159	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
160	non-removable;
161	no-sd;
162	no-sdio;
163	no-1-8-v;
164	st,neg-edge;
165	bus-width = <8>;
166	vmmc-supply = <&reg_3v3>;
167	vqmmc-supply = <&reg_3v3>;
168	status = "okay";
169};
170
171&sdmmc2_b4_od_pins_a {
172	pins1 {
173		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
174			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
175			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
176			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
177	};
178};
179
180&sdmmc2_b4_pins_a {
181	pins1 {
182		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
183			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
184			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
185			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
186			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
187	};
188};
189
190&sdmmc2_b4_sleep_pins_a {
191	pins {
192		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
193			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
194			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
195			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
196			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
197			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
198	};
199};
200
201&sdmmc2_d47_pins_a {
202	pins {
203		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
204			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
205			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
206			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
207	};
208};
209
210&sdmmc2_d47_sleep_pins_a {
211	pins {
212		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
213			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
214			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
215			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
216	};
217};
218
219&sdmmc3 {
220	pinctrl-names = "default", "opendrain", "sleep";
221	pinctrl-0 = <&sdmmc3_b4_pins_b>;
222	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
223	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
224	non-removable;
225	no-1-8-v;
226	st,neg-edge;
227	bus-width = <4>;
228	vmmc-supply = <&reg_3v3>;
229	vqmmc-supply = <&reg_3v3>;
230	mmc-pwrseq = <&wifi_pwrseq>;
231	#address-cells = <1>;
232	#size-cells = <0>;
233	status = "okay";
234
235	mmc@1 {
236		compatible = "prt,prtt1c-wfm200", "silabs,wf200";
237		reg = <1>;
238	};
239};
240
241&sdmmc3_b4_od_pins_b {
242	pins1 {
243		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
244			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
245			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
246			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
247	};
248};
249
250&sdmmc3_b4_pins_b {
251	pins1 {
252		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
253			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
254			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
255			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
256			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
257	};
258};
259
260&sdmmc3_b4_sleep_pins_b {
261	pins {
262		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
263			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
264			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
265			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
266			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
267			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
268	};
269};
270
271&spi1 {
272	pinctrl-0 = <&spi1_pins_b>;
273	pinctrl-names = "default";
274	cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
275	/delete-property/dmas;
276	/delete-property/dma-names;
277	status = "okay";
278
279	switch@0 {
280		compatible = "nxp,sja1105q";
281		reg = <0>;
282		spi-max-frequency = <4000000>;
283		spi-rx-delay-us = <1>;
284		spi-tx-delay-us = <1>;
285		spi-cpha;
286
287		reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
288
289		clocks = <&clock_sja1105>;
290
291		ports {
292			#address-cells = <1>;
293			#size-cells = <0>;
294
295			port@0 {
296				reg = <0>;
297				label = "t1l0";
298				phy-mode = "rmii";
299				phy-handle = <&t1l0_phy>;
300			};
301
302			port@1 {
303				reg = <1>;
304				label = "t1l1";
305				phy-mode = "rmii";
306				phy-handle = <&t1l1_phy>;
307			};
308
309			port@2 {
310				reg = <2>;
311				label = "t1l2";
312				phy-mode = "rmii";
313				phy-handle = <&t1l2_phy>;
314			};
315
316			port@3 {
317				reg = <3>;
318				label = "rj45";
319				phy-handle = <&rj45_phy>;
320				phy-mode = "rgmii-id";
321			};
322
323			port@4 {
324				reg = <4>;
325				label = "cpu";
326				ethernet = <&ethernet0>;
327				phy-mode = "rmii";
328
329				fixed-link {
330					speed = <100>;
331					full-duplex;
332				};
333			};
334		};
335	};
336};
337