xref: /openbmc/linux/arch/arm/boot/dts/st/stm32mp151.dtsi (revision 93696d8f)
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/stm32mp1-clks.h>
8#include <dt-bindings/reset/stm32mp1-resets.h>
9
10/ {
11	#address-cells = <1>;
12	#size-cells = <1>;
13
14	cpus {
15		#address-cells = <1>;
16		#size-cells = <0>;
17
18		cpu0: cpu@0 {
19			compatible = "arm,cortex-a7";
20			clock-frequency = <650000000>;
21			device_type = "cpu";
22			reg = <0>;
23		};
24	};
25
26	arm-pmu {
27		compatible = "arm,cortex-a7-pmu";
28		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
29		interrupt-affinity = <&cpu0>;
30		interrupt-parent = <&intc>;
31	};
32
33	psci {
34		compatible = "arm,psci-1.0";
35		method = "smc";
36	};
37
38	intc: interrupt-controller@a0021000 {
39		compatible = "arm,cortex-a7-gic";
40		#interrupt-cells = <3>;
41		interrupt-controller;
42		reg = <0xa0021000 0x1000>,
43		      <0xa0022000 0x2000>;
44	};
45
46	timer {
47		compatible = "arm,armv7-timer";
48		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
49			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
50			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
51			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
52		interrupt-parent = <&intc>;
53		arm,no-tick-in-suspend;
54	};
55
56	clocks {
57		clk_hse: clk-hse {
58			#clock-cells = <0>;
59			compatible = "fixed-clock";
60			clock-frequency = <24000000>;
61		};
62
63		clk_hsi: clk-hsi {
64			#clock-cells = <0>;
65			compatible = "fixed-clock";
66			clock-frequency = <64000000>;
67		};
68
69		clk_lse: clk-lse {
70			#clock-cells = <0>;
71			compatible = "fixed-clock";
72			clock-frequency = <32768>;
73		};
74
75		clk_lsi: clk-lsi {
76			#clock-cells = <0>;
77			compatible = "fixed-clock";
78			clock-frequency = <32000>;
79		};
80
81		clk_csi: clk-csi {
82			#clock-cells = <0>;
83			compatible = "fixed-clock";
84			clock-frequency = <4000000>;
85		};
86	};
87
88	thermal-zones {
89		cpu_thermal: cpu-thermal {
90			polling-delay-passive = <0>;
91			polling-delay = <0>;
92			thermal-sensors = <&dts>;
93
94			trips {
95				cpu_alert1: cpu-alert1 {
96					temperature = <85000>;
97					hysteresis = <0>;
98					type = "passive";
99				};
100
101				cpu-crit {
102					temperature = <120000>;
103					hysteresis = <0>;
104					type = "critical";
105				};
106			};
107
108			cooling-maps {
109			};
110		};
111	};
112
113	booster: regulator-booster {
114		compatible = "st,stm32mp1-booster";
115		st,syscfg = <&syscfg>;
116		status = "disabled";
117	};
118
119	soc {
120		compatible = "simple-bus";
121		#address-cells = <1>;
122		#size-cells = <1>;
123		interrupt-parent = <&intc>;
124		ranges;
125
126		timers2: timer@40000000 {
127			#address-cells = <1>;
128			#size-cells = <0>;
129			compatible = "st,stm32-timers";
130			reg = <0x40000000 0x400>;
131			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
132			interrupt-names = "global";
133			clocks = <&rcc TIM2_K>;
134			clock-names = "int";
135			dmas = <&dmamux1 18 0x400 0x1>,
136			       <&dmamux1 19 0x400 0x1>,
137			       <&dmamux1 20 0x400 0x1>,
138			       <&dmamux1 21 0x400 0x1>,
139			       <&dmamux1 22 0x400 0x1>;
140			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
141			status = "disabled";
142
143			pwm {
144				compatible = "st,stm32-pwm";
145				#pwm-cells = <3>;
146				status = "disabled";
147			};
148
149			timer@1 {
150				compatible = "st,stm32h7-timer-trigger";
151				reg = <1>;
152				status = "disabled";
153			};
154
155			counter {
156				compatible = "st,stm32-timer-counter";
157				status = "disabled";
158			};
159		};
160
161		timers3: timer@40001000 {
162			#address-cells = <1>;
163			#size-cells = <0>;
164			compatible = "st,stm32-timers";
165			reg = <0x40001000 0x400>;
166			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
167			interrupt-names = "global";
168			clocks = <&rcc TIM3_K>;
169			clock-names = "int";
170			dmas = <&dmamux1 23 0x400 0x1>,
171			       <&dmamux1 24 0x400 0x1>,
172			       <&dmamux1 25 0x400 0x1>,
173			       <&dmamux1 26 0x400 0x1>,
174			       <&dmamux1 27 0x400 0x1>,
175			       <&dmamux1 28 0x400 0x1>;
176			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
177			status = "disabled";
178
179			pwm {
180				compatible = "st,stm32-pwm";
181				#pwm-cells = <3>;
182				status = "disabled";
183			};
184
185			timer@2 {
186				compatible = "st,stm32h7-timer-trigger";
187				reg = <2>;
188				status = "disabled";
189			};
190
191			counter {
192				compatible = "st,stm32-timer-counter";
193				status = "disabled";
194			};
195		};
196
197		timers4: timer@40002000 {
198			#address-cells = <1>;
199			#size-cells = <0>;
200			compatible = "st,stm32-timers";
201			reg = <0x40002000 0x400>;
202			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
203			interrupt-names = "global";
204			clocks = <&rcc TIM4_K>;
205			clock-names = "int";
206			dmas = <&dmamux1 29 0x400 0x1>,
207			       <&dmamux1 30 0x400 0x1>,
208			       <&dmamux1 31 0x400 0x1>,
209			       <&dmamux1 32 0x400 0x1>;
210			dma-names = "ch1", "ch2", "ch3", "ch4";
211			status = "disabled";
212
213			pwm {
214				compatible = "st,stm32-pwm";
215				#pwm-cells = <3>;
216				status = "disabled";
217			};
218
219			timer@3 {
220				compatible = "st,stm32h7-timer-trigger";
221				reg = <3>;
222				status = "disabled";
223			};
224
225			counter {
226				compatible = "st,stm32-timer-counter";
227				status = "disabled";
228			};
229		};
230
231		timers5: timer@40003000 {
232			#address-cells = <1>;
233			#size-cells = <0>;
234			compatible = "st,stm32-timers";
235			reg = <0x40003000 0x400>;
236			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
237			interrupt-names = "global";
238			clocks = <&rcc TIM5_K>;
239			clock-names = "int";
240			dmas = <&dmamux1 55 0x400 0x1>,
241			       <&dmamux1 56 0x400 0x1>,
242			       <&dmamux1 57 0x400 0x1>,
243			       <&dmamux1 58 0x400 0x1>,
244			       <&dmamux1 59 0x400 0x1>,
245			       <&dmamux1 60 0x400 0x1>;
246			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
247			status = "disabled";
248
249			pwm {
250				compatible = "st,stm32-pwm";
251				#pwm-cells = <3>;
252				status = "disabled";
253			};
254
255			timer@4 {
256				compatible = "st,stm32h7-timer-trigger";
257				reg = <4>;
258				status = "disabled";
259			};
260
261			counter {
262				compatible = "st,stm32-timer-counter";
263				status = "disabled";
264			};
265		};
266
267		timers6: timer@40004000 {
268			#address-cells = <1>;
269			#size-cells = <0>;
270			compatible = "st,stm32-timers";
271			reg = <0x40004000 0x400>;
272			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
273			interrupt-names = "global";
274			clocks = <&rcc TIM6_K>;
275			clock-names = "int";
276			dmas = <&dmamux1 69 0x400 0x1>;
277			dma-names = "up";
278			status = "disabled";
279
280			timer@5 {
281				compatible = "st,stm32h7-timer-trigger";
282				reg = <5>;
283				status = "disabled";
284			};
285		};
286
287		timers7: timer@40005000 {
288			#address-cells = <1>;
289			#size-cells = <0>;
290			compatible = "st,stm32-timers";
291			reg = <0x40005000 0x400>;
292			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
293			interrupt-names = "global";
294			clocks = <&rcc TIM7_K>;
295			clock-names = "int";
296			dmas = <&dmamux1 70 0x400 0x1>;
297			dma-names = "up";
298			status = "disabled";
299
300			timer@6 {
301				compatible = "st,stm32h7-timer-trigger";
302				reg = <6>;
303				status = "disabled";
304			};
305		};
306
307		timers12: timer@40006000 {
308			#address-cells = <1>;
309			#size-cells = <0>;
310			compatible = "st,stm32-timers";
311			reg = <0x40006000 0x400>;
312			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
313			interrupt-names = "global";
314			clocks = <&rcc TIM12_K>;
315			clock-names = "int";
316			status = "disabled";
317
318			pwm {
319				compatible = "st,stm32-pwm";
320				#pwm-cells = <3>;
321				status = "disabled";
322			};
323
324			timer@11 {
325				compatible = "st,stm32h7-timer-trigger";
326				reg = <11>;
327				status = "disabled";
328			};
329		};
330
331		timers13: timer@40007000 {
332			#address-cells = <1>;
333			#size-cells = <0>;
334			compatible = "st,stm32-timers";
335			reg = <0x40007000 0x400>;
336			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
337			interrupt-names = "global";
338			clocks = <&rcc TIM13_K>;
339			clock-names = "int";
340			status = "disabled";
341
342			pwm {
343				compatible = "st,stm32-pwm";
344				#pwm-cells = <3>;
345				status = "disabled";
346			};
347
348			timer@12 {
349				compatible = "st,stm32h7-timer-trigger";
350				reg = <12>;
351				status = "disabled";
352			};
353		};
354
355		timers14: timer@40008000 {
356			#address-cells = <1>;
357			#size-cells = <0>;
358			compatible = "st,stm32-timers";
359			reg = <0x40008000 0x400>;
360			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
361			interrupt-names = "global";
362			clocks = <&rcc TIM14_K>;
363			clock-names = "int";
364			status = "disabled";
365
366			pwm {
367				compatible = "st,stm32-pwm";
368				#pwm-cells = <3>;
369				status = "disabled";
370			};
371
372			timer@13 {
373				compatible = "st,stm32h7-timer-trigger";
374				reg = <13>;
375				status = "disabled";
376			};
377		};
378
379		lptimer1: timer@40009000 {
380			#address-cells = <1>;
381			#size-cells = <0>;
382			compatible = "st,stm32-lptimer";
383			reg = <0x40009000 0x400>;
384			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
385			clocks = <&rcc LPTIM1_K>;
386			clock-names = "mux";
387			wakeup-source;
388			status = "disabled";
389
390			pwm {
391				compatible = "st,stm32-pwm-lp";
392				#pwm-cells = <3>;
393				status = "disabled";
394			};
395
396			trigger@0 {
397				compatible = "st,stm32-lptimer-trigger";
398				reg = <0>;
399				status = "disabled";
400			};
401
402			counter {
403				compatible = "st,stm32-lptimer-counter";
404				status = "disabled";
405			};
406		};
407
408		spi2: spi@4000b000 {
409			#address-cells = <1>;
410			#size-cells = <0>;
411			compatible = "st,stm32h7-spi";
412			reg = <0x4000b000 0x400>;
413			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
414			clocks = <&rcc SPI2_K>;
415			resets = <&rcc SPI2_R>;
416			dmas = <&dmamux1 39 0x400 0x05>,
417			       <&dmamux1 40 0x400 0x05>;
418			dma-names = "rx", "tx";
419			status = "disabled";
420		};
421
422		i2s2: audio-controller@4000b000 {
423			compatible = "st,stm32h7-i2s";
424			#sound-dai-cells = <0>;
425			reg = <0x4000b000 0x400>;
426			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
427			dmas = <&dmamux1 39 0x400 0x01>,
428			       <&dmamux1 40 0x400 0x01>;
429			dma-names = "rx", "tx";
430			status = "disabled";
431		};
432
433		spi3: spi@4000c000 {
434			#address-cells = <1>;
435			#size-cells = <0>;
436			compatible = "st,stm32h7-spi";
437			reg = <0x4000c000 0x400>;
438			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
439			clocks = <&rcc SPI3_K>;
440			resets = <&rcc SPI3_R>;
441			dmas = <&dmamux1 61 0x400 0x05>,
442			       <&dmamux1 62 0x400 0x05>;
443			dma-names = "rx", "tx";
444			status = "disabled";
445		};
446
447		i2s3: audio-controller@4000c000 {
448			compatible = "st,stm32h7-i2s";
449			#sound-dai-cells = <0>;
450			reg = <0x4000c000 0x400>;
451			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
452			dmas = <&dmamux1 61 0x400 0x01>,
453			       <&dmamux1 62 0x400 0x01>;
454			dma-names = "rx", "tx";
455			status = "disabled";
456		};
457
458		spdifrx: audio-controller@4000d000 {
459			compatible = "st,stm32h7-spdifrx";
460			#sound-dai-cells = <0>;
461			reg = <0x4000d000 0x400>;
462			clocks = <&rcc SPDIF_K>;
463			clock-names = "kclk";
464			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
465			dmas = <&dmamux1 93 0x400 0x01>,
466			       <&dmamux1 94 0x400 0x01>;
467			dma-names = "rx", "rx-ctrl";
468			status = "disabled";
469		};
470
471		usart2: serial@4000e000 {
472			compatible = "st,stm32h7-uart";
473			reg = <0x4000e000 0x400>;
474			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
475			clocks = <&rcc USART2_K>;
476			wakeup-source;
477			dmas = <&dmamux1 43 0x400 0x15>,
478			       <&dmamux1 44 0x400 0x11>;
479			dma-names = "rx", "tx";
480			status = "disabled";
481		};
482
483		usart3: serial@4000f000 {
484			compatible = "st,stm32h7-uart";
485			reg = <0x4000f000 0x400>;
486			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
487			clocks = <&rcc USART3_K>;
488			wakeup-source;
489			dmas = <&dmamux1 45 0x400 0x15>,
490			       <&dmamux1 46 0x400 0x11>;
491			dma-names = "rx", "tx";
492			status = "disabled";
493		};
494
495		uart4: serial@40010000 {
496			compatible = "st,stm32h7-uart";
497			reg = <0x40010000 0x400>;
498			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
499			clocks = <&rcc UART4_K>;
500			wakeup-source;
501			dmas = <&dmamux1 63 0x400 0x15>,
502			       <&dmamux1 64 0x400 0x11>;
503			dma-names = "rx", "tx";
504			status = "disabled";
505		};
506
507		uart5: serial@40011000 {
508			compatible = "st,stm32h7-uart";
509			reg = <0x40011000 0x400>;
510			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
511			clocks = <&rcc UART5_K>;
512			wakeup-source;
513			dmas = <&dmamux1 65 0x400 0x15>,
514			       <&dmamux1 66 0x400 0x11>;
515			dma-names = "rx", "tx";
516			status = "disabled";
517		};
518
519		i2c1: i2c@40012000 {
520			compatible = "st,stm32mp15-i2c";
521			reg = <0x40012000 0x400>;
522			interrupt-names = "event", "error";
523			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
524				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
525			clocks = <&rcc I2C1_K>;
526			resets = <&rcc I2C1_R>;
527			#address-cells = <1>;
528			#size-cells = <0>;
529			st,syscfg-fmp = <&syscfg 0x4 0x1>;
530			wakeup-source;
531			i2c-analog-filter;
532			status = "disabled";
533		};
534
535		i2c2: i2c@40013000 {
536			compatible = "st,stm32mp15-i2c";
537			reg = <0x40013000 0x400>;
538			interrupt-names = "event", "error";
539			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
540				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
541			clocks = <&rcc I2C2_K>;
542			resets = <&rcc I2C2_R>;
543			#address-cells = <1>;
544			#size-cells = <0>;
545			st,syscfg-fmp = <&syscfg 0x4 0x2>;
546			wakeup-source;
547			i2c-analog-filter;
548			status = "disabled";
549		};
550
551		i2c3: i2c@40014000 {
552			compatible = "st,stm32mp15-i2c";
553			reg = <0x40014000 0x400>;
554			interrupt-names = "event", "error";
555			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
556				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
557			clocks = <&rcc I2C3_K>;
558			resets = <&rcc I2C3_R>;
559			#address-cells = <1>;
560			#size-cells = <0>;
561			st,syscfg-fmp = <&syscfg 0x4 0x4>;
562			wakeup-source;
563			i2c-analog-filter;
564			status = "disabled";
565		};
566
567		i2c5: i2c@40015000 {
568			compatible = "st,stm32mp15-i2c";
569			reg = <0x40015000 0x400>;
570			interrupt-names = "event", "error";
571			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
572				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
573			clocks = <&rcc I2C5_K>;
574			resets = <&rcc I2C5_R>;
575			#address-cells = <1>;
576			#size-cells = <0>;
577			st,syscfg-fmp = <&syscfg 0x4 0x10>;
578			wakeup-source;
579			i2c-analog-filter;
580			status = "disabled";
581		};
582
583		cec: cec@40016000 {
584			compatible = "st,stm32-cec";
585			reg = <0x40016000 0x400>;
586			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
587			clocks = <&rcc CEC_K>, <&rcc CEC>;
588			clock-names = "cec", "hdmi-cec";
589			status = "disabled";
590		};
591
592		dac: dac@40017000 {
593			compatible = "st,stm32h7-dac-core";
594			reg = <0x40017000 0x400>;
595			clocks = <&rcc DAC12>;
596			clock-names = "pclk";
597			#address-cells = <1>;
598			#size-cells = <0>;
599			status = "disabled";
600
601			dac1: dac@1 {
602				compatible = "st,stm32-dac";
603				#io-channel-cells = <1>;
604				reg = <1>;
605				status = "disabled";
606			};
607
608			dac2: dac@2 {
609				compatible = "st,stm32-dac";
610				#io-channel-cells = <1>;
611				reg = <2>;
612				status = "disabled";
613			};
614		};
615
616		uart7: serial@40018000 {
617			compatible = "st,stm32h7-uart";
618			reg = <0x40018000 0x400>;
619			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
620			clocks = <&rcc UART7_K>;
621			wakeup-source;
622			dmas = <&dmamux1 79 0x400 0x15>,
623			       <&dmamux1 80 0x400 0x11>;
624			dma-names = "rx", "tx";
625			status = "disabled";
626		};
627
628		uart8: serial@40019000 {
629			compatible = "st,stm32h7-uart";
630			reg = <0x40019000 0x400>;
631			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
632			clocks = <&rcc UART8_K>;
633			wakeup-source;
634			dmas = <&dmamux1 81 0x400 0x15>,
635			       <&dmamux1 82 0x400 0x11>;
636			dma-names = "rx", "tx";
637			status = "disabled";
638		};
639
640		timers1: timer@44000000 {
641			#address-cells = <1>;
642			#size-cells = <0>;
643			compatible = "st,stm32-timers";
644			reg = <0x44000000 0x400>;
645			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
646				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
647				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
648				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
649			interrupt-names = "brk", "up", "trg-com", "cc";
650			clocks = <&rcc TIM1_K>;
651			clock-names = "int";
652			dmas = <&dmamux1 11 0x400 0x1>,
653			       <&dmamux1 12 0x400 0x1>,
654			       <&dmamux1 13 0x400 0x1>,
655			       <&dmamux1 14 0x400 0x1>,
656			       <&dmamux1 15 0x400 0x1>,
657			       <&dmamux1 16 0x400 0x1>,
658			       <&dmamux1 17 0x400 0x1>;
659			dma-names = "ch1", "ch2", "ch3", "ch4",
660				    "up", "trig", "com";
661			status = "disabled";
662
663			pwm {
664				compatible = "st,stm32-pwm";
665				#pwm-cells = <3>;
666				status = "disabled";
667			};
668
669			timer@0 {
670				compatible = "st,stm32h7-timer-trigger";
671				reg = <0>;
672				status = "disabled";
673			};
674
675			counter {
676				compatible = "st,stm32-timer-counter";
677				status = "disabled";
678			};
679		};
680
681		timers8: timer@44001000 {
682			#address-cells = <1>;
683			#size-cells = <0>;
684			compatible = "st,stm32-timers";
685			reg = <0x44001000 0x400>;
686			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
687				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
688				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
689				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
690			interrupt-names = "brk", "up", "trg-com", "cc";
691			clocks = <&rcc TIM8_K>;
692			clock-names = "int";
693			dmas = <&dmamux1 47 0x400 0x1>,
694			       <&dmamux1 48 0x400 0x1>,
695			       <&dmamux1 49 0x400 0x1>,
696			       <&dmamux1 50 0x400 0x1>,
697			       <&dmamux1 51 0x400 0x1>,
698			       <&dmamux1 52 0x400 0x1>,
699			       <&dmamux1 53 0x400 0x1>;
700			dma-names = "ch1", "ch2", "ch3", "ch4",
701				    "up", "trig", "com";
702			status = "disabled";
703
704			pwm {
705				compatible = "st,stm32-pwm";
706				#pwm-cells = <3>;
707				status = "disabled";
708			};
709
710			timer@7 {
711				compatible = "st,stm32h7-timer-trigger";
712				reg = <7>;
713				status = "disabled";
714			};
715
716			counter {
717				compatible = "st,stm32-timer-counter";
718				status = "disabled";
719			};
720		};
721
722		usart6: serial@44003000 {
723			compatible = "st,stm32h7-uart";
724			reg = <0x44003000 0x400>;
725			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
726			clocks = <&rcc USART6_K>;
727			wakeup-source;
728			dmas = <&dmamux1 71 0x400 0x15>,
729			       <&dmamux1 72 0x400 0x11>;
730			dma-names = "rx", "tx";
731			status = "disabled";
732		};
733
734		spi1: spi@44004000 {
735			#address-cells = <1>;
736			#size-cells = <0>;
737			compatible = "st,stm32h7-spi";
738			reg = <0x44004000 0x400>;
739			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
740			clocks = <&rcc SPI1_K>;
741			resets = <&rcc SPI1_R>;
742			dmas = <&dmamux1 37 0x400 0x05>,
743			       <&dmamux1 38 0x400 0x05>;
744			dma-names = "rx", "tx";
745			status = "disabled";
746		};
747
748		i2s1: audio-controller@44004000 {
749			compatible = "st,stm32h7-i2s";
750			#sound-dai-cells = <0>;
751			reg = <0x44004000 0x400>;
752			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
753			dmas = <&dmamux1 37 0x400 0x01>,
754			       <&dmamux1 38 0x400 0x01>;
755			dma-names = "rx", "tx";
756			status = "disabled";
757		};
758
759		spi4: spi@44005000 {
760			#address-cells = <1>;
761			#size-cells = <0>;
762			compatible = "st,stm32h7-spi";
763			reg = <0x44005000 0x400>;
764			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
765			clocks = <&rcc SPI4_K>;
766			resets = <&rcc SPI4_R>;
767			dmas = <&dmamux1 83 0x400 0x05>,
768			       <&dmamux1 84 0x400 0x05>;
769			dma-names = "rx", "tx";
770			status = "disabled";
771		};
772
773		timers15: timer@44006000 {
774			#address-cells = <1>;
775			#size-cells = <0>;
776			compatible = "st,stm32-timers";
777			reg = <0x44006000 0x400>;
778			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
779			interrupt-names = "global";
780			clocks = <&rcc TIM15_K>;
781			clock-names = "int";
782			dmas = <&dmamux1 105 0x400 0x1>,
783			       <&dmamux1 106 0x400 0x1>,
784			       <&dmamux1 107 0x400 0x1>,
785			       <&dmamux1 108 0x400 0x1>;
786			dma-names = "ch1", "up", "trig", "com";
787			status = "disabled";
788
789			pwm {
790				compatible = "st,stm32-pwm";
791				#pwm-cells = <3>;
792				status = "disabled";
793			};
794
795			timer@14 {
796				compatible = "st,stm32h7-timer-trigger";
797				reg = <14>;
798				status = "disabled";
799			};
800		};
801
802		timers16: timer@44007000 {
803			#address-cells = <1>;
804			#size-cells = <0>;
805			compatible = "st,stm32-timers";
806			reg = <0x44007000 0x400>;
807			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
808			interrupt-names = "global";
809			clocks = <&rcc TIM16_K>;
810			clock-names = "int";
811			dmas = <&dmamux1 109 0x400 0x1>,
812			       <&dmamux1 110 0x400 0x1>;
813			dma-names = "ch1", "up";
814			status = "disabled";
815
816			pwm {
817				compatible = "st,stm32-pwm";
818				#pwm-cells = <3>;
819				status = "disabled";
820			};
821			timer@15 {
822				compatible = "st,stm32h7-timer-trigger";
823				reg = <15>;
824				status = "disabled";
825			};
826		};
827
828		timers17: timer@44008000 {
829			#address-cells = <1>;
830			#size-cells = <0>;
831			compatible = "st,stm32-timers";
832			reg = <0x44008000 0x400>;
833			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
834			interrupt-names = "global";
835			clocks = <&rcc TIM17_K>;
836			clock-names = "int";
837			dmas = <&dmamux1 111 0x400 0x1>,
838			       <&dmamux1 112 0x400 0x1>;
839			dma-names = "ch1", "up";
840			status = "disabled";
841
842			pwm {
843				compatible = "st,stm32-pwm";
844				#pwm-cells = <3>;
845				status = "disabled";
846			};
847
848			timer@16 {
849				compatible = "st,stm32h7-timer-trigger";
850				reg = <16>;
851				status = "disabled";
852			};
853		};
854
855		spi5: spi@44009000 {
856			#address-cells = <1>;
857			#size-cells = <0>;
858			compatible = "st,stm32h7-spi";
859			reg = <0x44009000 0x400>;
860			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
861			clocks = <&rcc SPI5_K>;
862			resets = <&rcc SPI5_R>;
863			dmas = <&dmamux1 85 0x400 0x05>,
864			       <&dmamux1 86 0x400 0x05>;
865			dma-names = "rx", "tx";
866			status = "disabled";
867		};
868
869		sai1: sai@4400a000 {
870			compatible = "st,stm32h7-sai";
871			#address-cells = <1>;
872			#size-cells = <1>;
873			ranges = <0 0x4400a000 0x400>;
874			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
875			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
876			resets = <&rcc SAI1_R>;
877			status = "disabled";
878
879			sai1a: audio-controller@4400a004 {
880				#sound-dai-cells = <0>;
881
882				compatible = "st,stm32-sai-sub-a";
883				reg = <0x4 0x20>;
884				clocks = <&rcc SAI1_K>;
885				clock-names = "sai_ck";
886				dmas = <&dmamux1 87 0x400 0x01>;
887				status = "disabled";
888			};
889
890			sai1b: audio-controller@4400a024 {
891				#sound-dai-cells = <0>;
892				compatible = "st,stm32-sai-sub-b";
893				reg = <0x24 0x20>;
894				clocks = <&rcc SAI1_K>;
895				clock-names = "sai_ck";
896				dmas = <&dmamux1 88 0x400 0x01>;
897				status = "disabled";
898			};
899		};
900
901		sai2: sai@4400b000 {
902			compatible = "st,stm32h7-sai";
903			#address-cells = <1>;
904			#size-cells = <1>;
905			ranges = <0 0x4400b000 0x400>;
906			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
907			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
908			resets = <&rcc SAI2_R>;
909			status = "disabled";
910
911			sai2a: audio-controller@4400b004 {
912				#sound-dai-cells = <0>;
913				compatible = "st,stm32-sai-sub-a";
914				reg = <0x4 0x20>;
915				clocks = <&rcc SAI2_K>;
916				clock-names = "sai_ck";
917				dmas = <&dmamux1 89 0x400 0x01>;
918				status = "disabled";
919			};
920
921			sai2b: audio-controller@4400b024 {
922				#sound-dai-cells = <0>;
923				compatible = "st,stm32-sai-sub-b";
924				reg = <0x24 0x20>;
925				clocks = <&rcc SAI2_K>;
926				clock-names = "sai_ck";
927				dmas = <&dmamux1 90 0x400 0x01>;
928				status = "disabled";
929			};
930		};
931
932		sai3: sai@4400c000 {
933			compatible = "st,stm32h7-sai";
934			#address-cells = <1>;
935			#size-cells = <1>;
936			ranges = <0 0x4400c000 0x400>;
937			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
938			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
939			resets = <&rcc SAI3_R>;
940			status = "disabled";
941
942			sai3a: audio-controller@4400c004 {
943				#sound-dai-cells = <0>;
944				compatible = "st,stm32-sai-sub-a";
945				reg = <0x04 0x20>;
946				clocks = <&rcc SAI3_K>;
947				clock-names = "sai_ck";
948				dmas = <&dmamux1 113 0x400 0x01>;
949				status = "disabled";
950			};
951
952			sai3b: audio-controller@4400c024 {
953				#sound-dai-cells = <0>;
954				compatible = "st,stm32-sai-sub-b";
955				reg = <0x24 0x20>;
956				clocks = <&rcc SAI3_K>;
957				clock-names = "sai_ck";
958				dmas = <&dmamux1 114 0x400 0x01>;
959				status = "disabled";
960			};
961		};
962
963		dfsdm: dfsdm@4400d000 {
964			compatible = "st,stm32mp1-dfsdm";
965			reg = <0x4400d000 0x800>;
966			clocks = <&rcc DFSDM_K>;
967			clock-names = "dfsdm";
968			#address-cells = <1>;
969			#size-cells = <0>;
970			status = "disabled";
971
972			dfsdm0: filter@0 {
973				compatible = "st,stm32-dfsdm-adc";
974				#io-channel-cells = <1>;
975				reg = <0>;
976				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
977				dmas = <&dmamux1 101 0x400 0x01>;
978				dma-names = "rx";
979				status = "disabled";
980			};
981
982			dfsdm1: filter@1 {
983				compatible = "st,stm32-dfsdm-adc";
984				#io-channel-cells = <1>;
985				reg = <1>;
986				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
987				dmas = <&dmamux1 102 0x400 0x01>;
988				dma-names = "rx";
989				status = "disabled";
990			};
991
992			dfsdm2: filter@2 {
993				compatible = "st,stm32-dfsdm-adc";
994				#io-channel-cells = <1>;
995				reg = <2>;
996				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
997				dmas = <&dmamux1 103 0x400 0x01>;
998				dma-names = "rx";
999				status = "disabled";
1000			};
1001
1002			dfsdm3: filter@3 {
1003				compatible = "st,stm32-dfsdm-adc";
1004				#io-channel-cells = <1>;
1005				reg = <3>;
1006				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
1007				dmas = <&dmamux1 104 0x400 0x01>;
1008				dma-names = "rx";
1009				status = "disabled";
1010			};
1011
1012			dfsdm4: filter@4 {
1013				compatible = "st,stm32-dfsdm-adc";
1014				#io-channel-cells = <1>;
1015				reg = <4>;
1016				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
1017				dmas = <&dmamux1 91 0x400 0x01>;
1018				dma-names = "rx";
1019				status = "disabled";
1020			};
1021
1022			dfsdm5: filter@5 {
1023				compatible = "st,stm32-dfsdm-adc";
1024				#io-channel-cells = <1>;
1025				reg = <5>;
1026				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
1027				dmas = <&dmamux1 92 0x400 0x01>;
1028				dma-names = "rx";
1029				status = "disabled";
1030			};
1031		};
1032
1033		dma1: dma-controller@48000000 {
1034			compatible = "st,stm32-dma";
1035			reg = <0x48000000 0x400>;
1036			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
1037				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1038				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
1039				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
1040				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
1041				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
1042				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
1043				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1044			clocks = <&rcc DMA1>;
1045			resets = <&rcc DMA1_R>;
1046			#dma-cells = <4>;
1047			st,mem2mem;
1048			dma-requests = <8>;
1049		};
1050
1051		dma2: dma-controller@48001000 {
1052			compatible = "st,stm32-dma";
1053			reg = <0x48001000 0x400>;
1054			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
1055				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
1056				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
1057				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
1058				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
1059				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
1060				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1061				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1062			clocks = <&rcc DMA2>;
1063			resets = <&rcc DMA2_R>;
1064			#dma-cells = <4>;
1065			st,mem2mem;
1066			dma-requests = <8>;
1067		};
1068
1069		dmamux1: dma-router@48002000 {
1070			compatible = "st,stm32h7-dmamux";
1071			reg = <0x48002000 0x40>;
1072			#dma-cells = <3>;
1073			dma-requests = <128>;
1074			dma-masters = <&dma1 &dma2>;
1075			dma-channels = <16>;
1076			clocks = <&rcc DMAMUX>;
1077			resets = <&rcc DMAMUX_R>;
1078		};
1079
1080		adc: adc@48003000 {
1081			compatible = "st,stm32mp1-adc-core";
1082			reg = <0x48003000 0x400>;
1083			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
1084				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
1085			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
1086			clock-names = "bus", "adc";
1087			interrupt-controller;
1088			st,syscfg = <&syscfg>;
1089			#interrupt-cells = <1>;
1090			#address-cells = <1>;
1091			#size-cells = <0>;
1092			status = "disabled";
1093
1094			adc1: adc@0 {
1095				compatible = "st,stm32mp1-adc";
1096				#io-channel-cells = <1>;
1097				#address-cells = <1>;
1098				#size-cells = <0>;
1099				reg = <0x0>;
1100				interrupt-parent = <&adc>;
1101				interrupts = <0>;
1102				dmas = <&dmamux1 9 0x400 0x01>;
1103				dma-names = "rx";
1104				status = "disabled";
1105			};
1106
1107			adc2: adc@100 {
1108				compatible = "st,stm32mp1-adc";
1109				#io-channel-cells = <1>;
1110				#address-cells = <1>;
1111				#size-cells = <0>;
1112				reg = <0x100>;
1113				interrupt-parent = <&adc>;
1114				interrupts = <1>;
1115				dmas = <&dmamux1 10 0x400 0x01>;
1116				dma-names = "rx";
1117				nvmem-cells = <&vrefint>;
1118				nvmem-cell-names = "vrefint";
1119				status = "disabled";
1120				channel@13 {
1121					reg = <13>;
1122					label = "vrefint";
1123				};
1124				channel@14 {
1125					reg = <14>;
1126					label = "vddcore";
1127				};
1128			};
1129		};
1130
1131		sdmmc3: mmc@48004000 {
1132			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1133			arm,primecell-periphid = <0x00253180>;
1134			reg = <0x48004000 0x400>;
1135			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
1136			clocks = <&rcc SDMMC3_K>;
1137			clock-names = "apb_pclk";
1138			resets = <&rcc SDMMC3_R>;
1139			cap-sd-highspeed;
1140			cap-mmc-highspeed;
1141			max-frequency = <120000000>;
1142			status = "disabled";
1143		};
1144
1145		usbotg_hs: usb-otg@49000000 {
1146			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
1147			reg = <0x49000000 0x10000>;
1148			clocks = <&rcc USBO_K>, <&usbphyc>;
1149			clock-names = "otg", "utmi";
1150			resets = <&rcc USBO_R>;
1151			reset-names = "dwc2";
1152			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1153			g-rx-fifo-size = <512>;
1154			g-np-tx-fifo-size = <32>;
1155			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
1156			dr_mode = "otg";
1157			otg-rev = <0x200>;
1158			usb33d-supply = <&usb33>;
1159			status = "disabled";
1160		};
1161
1162		ipcc: mailbox@4c001000 {
1163			compatible = "st,stm32mp1-ipcc";
1164			#mbox-cells = <1>;
1165			reg = <0x4c001000 0x400>;
1166			st,proc-id = <0>;
1167			interrupts-extended =
1168				<&exti 61 1>,
1169				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1170			interrupt-names = "rx", "tx";
1171			clocks = <&rcc IPCC>;
1172			wakeup-source;
1173			status = "disabled";
1174		};
1175
1176		dcmi: dcmi@4c006000 {
1177			compatible = "st,stm32-dcmi";
1178			reg = <0x4c006000 0x400>;
1179			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1180			resets = <&rcc CAMITF_R>;
1181			clocks = <&rcc DCMI>;
1182			clock-names = "mclk";
1183			dmas = <&dmamux1 75 0x400 0x01>;
1184			dma-names = "tx";
1185			status = "disabled";
1186		};
1187
1188		rcc: rcc@50000000 {
1189			compatible = "st,stm32mp1-rcc", "syscon";
1190			reg = <0x50000000 0x1000>;
1191			#clock-cells = <1>;
1192			#reset-cells = <1>;
1193		};
1194
1195		pwr_regulators: pwr@50001000 {
1196			compatible = "st,stm32mp1,pwr-reg";
1197			reg = <0x50001000 0x10>;
1198
1199			reg11: reg11 {
1200				regulator-name = "reg11";
1201				regulator-min-microvolt = <1100000>;
1202				regulator-max-microvolt = <1100000>;
1203			};
1204
1205			reg18: reg18 {
1206				regulator-name = "reg18";
1207				regulator-min-microvolt = <1800000>;
1208				regulator-max-microvolt = <1800000>;
1209			};
1210
1211			usb33: usb33 {
1212				regulator-name = "usb33";
1213				regulator-min-microvolt = <3300000>;
1214				regulator-max-microvolt = <3300000>;
1215			};
1216		};
1217
1218		pwr_mcu: pwr_mcu@50001014 {
1219			compatible = "st,stm32mp151-pwr-mcu", "syscon";
1220			reg = <0x50001014 0x4>;
1221		};
1222
1223		exti: interrupt-controller@5000d000 {
1224			compatible = "st,stm32mp1-exti", "syscon";
1225			interrupt-controller;
1226			#interrupt-cells = <2>;
1227			reg = <0x5000d000 0x400>;
1228		};
1229
1230		syscfg: syscon@50020000 {
1231			compatible = "st,stm32mp157-syscfg", "syscon";
1232			reg = <0x50020000 0x400>;
1233			clocks = <&rcc SYSCFG>;
1234		};
1235
1236		lptimer2: timer@50021000 {
1237			#address-cells = <1>;
1238			#size-cells = <0>;
1239			compatible = "st,stm32-lptimer";
1240			reg = <0x50021000 0x400>;
1241			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
1242			clocks = <&rcc LPTIM2_K>;
1243			clock-names = "mux";
1244			wakeup-source;
1245			status = "disabled";
1246
1247			pwm {
1248				compatible = "st,stm32-pwm-lp";
1249				#pwm-cells = <3>;
1250				status = "disabled";
1251			};
1252
1253			trigger@1 {
1254				compatible = "st,stm32-lptimer-trigger";
1255				reg = <1>;
1256				status = "disabled";
1257			};
1258
1259			counter {
1260				compatible = "st,stm32-lptimer-counter";
1261				status = "disabled";
1262			};
1263		};
1264
1265		lptimer3: timer@50022000 {
1266			#address-cells = <1>;
1267			#size-cells = <0>;
1268			compatible = "st,stm32-lptimer";
1269			reg = <0x50022000 0x400>;
1270			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
1271			clocks = <&rcc LPTIM3_K>;
1272			clock-names = "mux";
1273			wakeup-source;
1274			status = "disabled";
1275
1276			pwm {
1277				compatible = "st,stm32-pwm-lp";
1278				#pwm-cells = <3>;
1279				status = "disabled";
1280			};
1281
1282			trigger@2 {
1283				compatible = "st,stm32-lptimer-trigger";
1284				reg = <2>;
1285				status = "disabled";
1286			};
1287		};
1288
1289		lptimer4: timer@50023000 {
1290			compatible = "st,stm32-lptimer";
1291			reg = <0x50023000 0x400>;
1292			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
1293			clocks = <&rcc LPTIM4_K>;
1294			clock-names = "mux";
1295			wakeup-source;
1296			status = "disabled";
1297
1298			pwm {
1299				compatible = "st,stm32-pwm-lp";
1300				#pwm-cells = <3>;
1301				status = "disabled";
1302			};
1303		};
1304
1305		lptimer5: timer@50024000 {
1306			compatible = "st,stm32-lptimer";
1307			reg = <0x50024000 0x400>;
1308			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
1309			clocks = <&rcc LPTIM5_K>;
1310			clock-names = "mux";
1311			wakeup-source;
1312			status = "disabled";
1313
1314			pwm {
1315				compatible = "st,stm32-pwm-lp";
1316				#pwm-cells = <3>;
1317				status = "disabled";
1318			};
1319		};
1320
1321		vrefbuf: vrefbuf@50025000 {
1322			compatible = "st,stm32-vrefbuf";
1323			reg = <0x50025000 0x8>;
1324			regulator-min-microvolt = <1500000>;
1325			regulator-max-microvolt = <2500000>;
1326			clocks = <&rcc VREF>;
1327			status = "disabled";
1328		};
1329
1330		sai4: sai@50027000 {
1331			compatible = "st,stm32h7-sai";
1332			#address-cells = <1>;
1333			#size-cells = <1>;
1334			ranges = <0 0x50027000 0x400>;
1335			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
1336			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
1337			resets = <&rcc SAI4_R>;
1338			status = "disabled";
1339
1340			sai4a: audio-controller@50027004 {
1341				#sound-dai-cells = <0>;
1342				compatible = "st,stm32-sai-sub-a";
1343				reg = <0x04 0x20>;
1344				clocks = <&rcc SAI4_K>;
1345				clock-names = "sai_ck";
1346				dmas = <&dmamux1 99 0x400 0x01>;
1347				status = "disabled";
1348			};
1349
1350			sai4b: audio-controller@50027024 {
1351				#sound-dai-cells = <0>;
1352				compatible = "st,stm32-sai-sub-b";
1353				reg = <0x24 0x20>;
1354				clocks = <&rcc SAI4_K>;
1355				clock-names = "sai_ck";
1356				dmas = <&dmamux1 100 0x400 0x01>;
1357				status = "disabled";
1358			};
1359		};
1360
1361		dts: thermal@50028000 {
1362			compatible = "st,stm32-thermal";
1363			reg = <0x50028000 0x100>;
1364			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
1365			clocks = <&rcc TMPSENS>;
1366			clock-names = "pclk";
1367			#thermal-sensor-cells = <0>;
1368			status = "disabled";
1369		};
1370
1371		hash1: hash@54002000 {
1372			compatible = "st,stm32f756-hash";
1373			reg = <0x54002000 0x400>;
1374			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1375			clocks = <&rcc HASH1>;
1376			resets = <&rcc HASH1_R>;
1377			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
1378			dma-names = "in";
1379			dma-maxburst = <2>;
1380			status = "disabled";
1381		};
1382
1383		rng1: rng@54003000 {
1384			compatible = "st,stm32-rng";
1385			reg = <0x54003000 0x400>;
1386			clocks = <&rcc RNG1_K>;
1387			resets = <&rcc RNG1_R>;
1388			status = "disabled";
1389		};
1390
1391		mdma1: dma-controller@58000000 {
1392			compatible = "st,stm32h7-mdma";
1393			reg = <0x58000000 0x1000>;
1394			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1395			clocks = <&rcc MDMA>;
1396			resets = <&rcc MDMA_R>;
1397			#dma-cells = <5>;
1398			dma-channels = <32>;
1399			dma-requests = <48>;
1400		};
1401
1402		fmc: memory-controller@58002000 {
1403			#address-cells = <2>;
1404			#size-cells = <1>;
1405			compatible = "st,stm32mp1-fmc2-ebi";
1406			reg = <0x58002000 0x1000>;
1407			clocks = <&rcc FMC_K>;
1408			resets = <&rcc FMC_R>;
1409			status = "disabled";
1410
1411			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
1412				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
1413				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
1414				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
1415				 <4 0 0x80000000 0x10000000>; /* NAND */
1416
1417			nand-controller@4,0 {
1418				#address-cells = <1>;
1419				#size-cells = <0>;
1420				compatible = "st,stm32mp1-fmc2-nfc";
1421				reg = <4 0x00000000 0x1000>,
1422				      <4 0x08010000 0x1000>,
1423				      <4 0x08020000 0x1000>,
1424				      <4 0x01000000 0x1000>,
1425				      <4 0x09010000 0x1000>,
1426				      <4 0x09020000 0x1000>;
1427				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1428				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
1429				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
1430				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
1431				dma-names = "tx", "rx", "ecc";
1432				status = "disabled";
1433			};
1434		};
1435
1436		qspi: spi@58003000 {
1437			compatible = "st,stm32f469-qspi";
1438			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
1439			reg-names = "qspi", "qspi_mm";
1440			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
1441			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
1442			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
1443			dma-names = "tx", "rx";
1444			clocks = <&rcc QSPI_K>;
1445			resets = <&rcc QSPI_R>;
1446			#address-cells = <1>;
1447			#size-cells = <0>;
1448			status = "disabled";
1449		};
1450
1451		sdmmc1: mmc@58005000 {
1452			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1453			arm,primecell-periphid = <0x00253180>;
1454			reg = <0x58005000 0x1000>;
1455			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1456			clocks = <&rcc SDMMC1_K>;
1457			clock-names = "apb_pclk";
1458			resets = <&rcc SDMMC1_R>;
1459			cap-sd-highspeed;
1460			cap-mmc-highspeed;
1461			max-frequency = <120000000>;
1462			status = "disabled";
1463		};
1464
1465		sdmmc2: mmc@58007000 {
1466			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1467			arm,primecell-periphid = <0x00253180>;
1468			reg = <0x58007000 0x1000>;
1469			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
1470			clocks = <&rcc SDMMC2_K>;
1471			clock-names = "apb_pclk";
1472			resets = <&rcc SDMMC2_R>;
1473			cap-sd-highspeed;
1474			cap-mmc-highspeed;
1475			max-frequency = <120000000>;
1476			status = "disabled";
1477		};
1478
1479		crc1: crc@58009000 {
1480			compatible = "st,stm32f7-crc";
1481			reg = <0x58009000 0x400>;
1482			clocks = <&rcc CRC1>;
1483			status = "disabled";
1484		};
1485
1486		ethernet0: ethernet@5800a000 {
1487			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
1488			reg = <0x5800a000 0x2000>;
1489			reg-names = "stmmaceth";
1490			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1491			interrupt-names = "macirq";
1492			clock-names = "stmmaceth",
1493				      "mac-clk-tx",
1494				      "mac-clk-rx",
1495				      "eth-ck",
1496				      "ptp_ref",
1497				      "ethstp";
1498			clocks = <&rcc ETHMAC>,
1499				 <&rcc ETHTX>,
1500				 <&rcc ETHRX>,
1501				 <&rcc ETHCK_K>,
1502				 <&rcc ETHPTP_K>,
1503				 <&rcc ETHSTP>;
1504			st,syscon = <&syscfg 0x4>;
1505			snps,mixed-burst;
1506			snps,pbl = <2>;
1507			snps,en-tx-lpi-clockgating;
1508			snps,axi-config = <&stmmac_axi_config_0>;
1509			snps,tso;
1510			status = "disabled";
1511
1512			stmmac_axi_config_0: stmmac-axi-config {
1513				snps,wr_osr_lmt = <0x7>;
1514				snps,rd_osr_lmt = <0x7>;
1515				snps,blen = <0 0 0 0 16 8 4>;
1516			};
1517		};
1518
1519		usbh_ohci: usb@5800c000 {
1520			compatible = "generic-ohci";
1521			reg = <0x5800c000 0x1000>;
1522			clocks = <&usbphyc>, <&rcc USBH>;
1523			resets = <&rcc USBH_R>;
1524			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1525			status = "disabled";
1526		};
1527
1528		usbh_ehci: usb@5800d000 {
1529			compatible = "generic-ehci";
1530			reg = <0x5800d000 0x1000>;
1531			clocks = <&usbphyc>, <&rcc USBH>;
1532			resets = <&rcc USBH_R>;
1533			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1534			companion = <&usbh_ohci>;
1535			status = "disabled";
1536		};
1537
1538		ltdc: display-controller@5a001000 {
1539			compatible = "st,stm32-ltdc";
1540			reg = <0x5a001000 0x400>;
1541			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1542				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1543			clocks = <&rcc LTDC_PX>;
1544			clock-names = "lcd";
1545			resets = <&rcc LTDC_R>;
1546			status = "disabled";
1547		};
1548
1549		iwdg2: watchdog@5a002000 {
1550			compatible = "st,stm32mp1-iwdg";
1551			reg = <0x5a002000 0x400>;
1552			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
1553			clock-names = "pclk", "lsi";
1554			status = "disabled";
1555		};
1556
1557		usbphyc: usbphyc@5a006000 {
1558			#address-cells = <1>;
1559			#size-cells = <0>;
1560			#clock-cells = <0>;
1561			compatible = "st,stm32mp1-usbphyc";
1562			reg = <0x5a006000 0x1000>;
1563			clocks = <&rcc USBPHY_K>;
1564			resets = <&rcc USBPHY_R>;
1565			vdda1v1-supply = <&reg11>;
1566			vdda1v8-supply = <&reg18>;
1567			status = "disabled";
1568
1569			usbphyc_port0: usb-phy@0 {
1570				#phy-cells = <0>;
1571				reg = <0>;
1572			};
1573
1574			usbphyc_port1: usb-phy@1 {
1575				#phy-cells = <1>;
1576				reg = <1>;
1577			};
1578		};
1579
1580		usart1: serial@5c000000 {
1581			compatible = "st,stm32h7-uart";
1582			reg = <0x5c000000 0x400>;
1583			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
1584			clocks = <&rcc USART1_K>;
1585			wakeup-source;
1586			status = "disabled";
1587		};
1588
1589		spi6: spi@5c001000 {
1590			#address-cells = <1>;
1591			#size-cells = <0>;
1592			compatible = "st,stm32h7-spi";
1593			reg = <0x5c001000 0x400>;
1594			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1595			clocks = <&rcc SPI6_K>;
1596			resets = <&rcc SPI6_R>;
1597			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
1598			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
1599			dma-names = "rx", "tx";
1600			status = "disabled";
1601		};
1602
1603		i2c4: i2c@5c002000 {
1604			compatible = "st,stm32mp15-i2c";
1605			reg = <0x5c002000 0x400>;
1606			interrupt-names = "event", "error";
1607			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1608				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1609			clocks = <&rcc I2C4_K>;
1610			resets = <&rcc I2C4_R>;
1611			#address-cells = <1>;
1612			#size-cells = <0>;
1613			st,syscfg-fmp = <&syscfg 0x4 0x8>;
1614			wakeup-source;
1615			i2c-analog-filter;
1616			status = "disabled";
1617		};
1618
1619		rtc: rtc@5c004000 {
1620			compatible = "st,stm32mp1-rtc";
1621			reg = <0x5c004000 0x400>;
1622			clocks = <&rcc RTCAPB>, <&rcc RTC>;
1623			clock-names = "pclk", "rtc_ck";
1624			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
1625			status = "disabled";
1626		};
1627
1628		bsec: efuse@5c005000 {
1629			compatible = "st,stm32mp15-bsec";
1630			reg = <0x5c005000 0x400>;
1631			#address-cells = <1>;
1632			#size-cells = <1>;
1633			part_number_otp: part-number-otp@4 {
1634				reg = <0x4 0x1>;
1635			};
1636			vrefint: vrefin-cal@52 {
1637				reg = <0x52 0x2>;
1638			};
1639			ts_cal1: calib@5c {
1640				reg = <0x5c 0x2>;
1641			};
1642			ts_cal2: calib@5e {
1643				reg = <0x5e 0x2>;
1644			};
1645		};
1646
1647		i2c6: i2c@5c009000 {
1648			compatible = "st,stm32mp15-i2c";
1649			reg = <0x5c009000 0x400>;
1650			interrupt-names = "event", "error";
1651			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
1652				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
1653			clocks = <&rcc I2C6_K>;
1654			resets = <&rcc I2C6_R>;
1655			#address-cells = <1>;
1656			#size-cells = <0>;
1657			st,syscfg-fmp = <&syscfg 0x4 0x20>;
1658			wakeup-source;
1659			i2c-analog-filter;
1660			status = "disabled";
1661		};
1662
1663		tamp: tamp@5c00a000 {
1664			compatible = "st,stm32-tamp", "syscon", "simple-mfd";
1665			reg = <0x5c00a000 0x400>;
1666		};
1667
1668		/*
1669		 * Break node order to solve dependency probe issue between
1670		 * pinctrl and exti.
1671		 */
1672		pinctrl: pinctrl@50002000 {
1673			#address-cells = <1>;
1674			#size-cells = <1>;
1675			compatible = "st,stm32mp157-pinctrl";
1676			ranges = <0 0x50002000 0xa400>;
1677			interrupt-parent = <&exti>;
1678			st,syscfg = <&exti 0x60 0xff>;
1679
1680			gpioa: gpio@50002000 {
1681				gpio-controller;
1682				#gpio-cells = <2>;
1683				interrupt-controller;
1684				#interrupt-cells = <2>;
1685				reg = <0x0 0x400>;
1686				clocks = <&rcc GPIOA>;
1687				st,bank-name = "GPIOA";
1688				status = "disabled";
1689			};
1690
1691			gpiob: gpio@50003000 {
1692				gpio-controller;
1693				#gpio-cells = <2>;
1694				interrupt-controller;
1695				#interrupt-cells = <2>;
1696				reg = <0x1000 0x400>;
1697				clocks = <&rcc GPIOB>;
1698				st,bank-name = "GPIOB";
1699				status = "disabled";
1700			};
1701
1702			gpioc: gpio@50004000 {
1703				gpio-controller;
1704				#gpio-cells = <2>;
1705				interrupt-controller;
1706				#interrupt-cells = <2>;
1707				reg = <0x2000 0x400>;
1708				clocks = <&rcc GPIOC>;
1709				st,bank-name = "GPIOC";
1710				status = "disabled";
1711			};
1712
1713			gpiod: gpio@50005000 {
1714				gpio-controller;
1715				#gpio-cells = <2>;
1716				interrupt-controller;
1717				#interrupt-cells = <2>;
1718				reg = <0x3000 0x400>;
1719				clocks = <&rcc GPIOD>;
1720				st,bank-name = "GPIOD";
1721				status = "disabled";
1722			};
1723
1724			gpioe: gpio@50006000 {
1725				gpio-controller;
1726				#gpio-cells = <2>;
1727				interrupt-controller;
1728				#interrupt-cells = <2>;
1729				reg = <0x4000 0x400>;
1730				clocks = <&rcc GPIOE>;
1731				st,bank-name = "GPIOE";
1732				status = "disabled";
1733			};
1734
1735			gpiof: gpio@50007000 {
1736				gpio-controller;
1737				#gpio-cells = <2>;
1738				interrupt-controller;
1739				#interrupt-cells = <2>;
1740				reg = <0x5000 0x400>;
1741				clocks = <&rcc GPIOF>;
1742				st,bank-name = "GPIOF";
1743				status = "disabled";
1744			};
1745
1746			gpiog: gpio@50008000 {
1747				gpio-controller;
1748				#gpio-cells = <2>;
1749				interrupt-controller;
1750				#interrupt-cells = <2>;
1751				reg = <0x6000 0x400>;
1752				clocks = <&rcc GPIOG>;
1753				st,bank-name = "GPIOG";
1754				status = "disabled";
1755			};
1756
1757			gpioh: gpio@50009000 {
1758				gpio-controller;
1759				#gpio-cells = <2>;
1760				interrupt-controller;
1761				#interrupt-cells = <2>;
1762				reg = <0x7000 0x400>;
1763				clocks = <&rcc GPIOH>;
1764				st,bank-name = "GPIOH";
1765				status = "disabled";
1766			};
1767
1768			gpioi: gpio@5000a000 {
1769				gpio-controller;
1770				#gpio-cells = <2>;
1771				interrupt-controller;
1772				#interrupt-cells = <2>;
1773				reg = <0x8000 0x400>;
1774				clocks = <&rcc GPIOI>;
1775				st,bank-name = "GPIOI";
1776				status = "disabled";
1777			};
1778
1779			gpioj: gpio@5000b000 {
1780				gpio-controller;
1781				#gpio-cells = <2>;
1782				interrupt-controller;
1783				#interrupt-cells = <2>;
1784				reg = <0x9000 0x400>;
1785				clocks = <&rcc GPIOJ>;
1786				st,bank-name = "GPIOJ";
1787				status = "disabled";
1788			};
1789
1790			gpiok: gpio@5000c000 {
1791				gpio-controller;
1792				#gpio-cells = <2>;
1793				interrupt-controller;
1794				#interrupt-cells = <2>;
1795				reg = <0xa000 0x400>;
1796				clocks = <&rcc GPIOK>;
1797				st,bank-name = "GPIOK";
1798				status = "disabled";
1799			};
1800		};
1801
1802		pinctrl_z: pinctrl@54004000 {
1803			#address-cells = <1>;
1804			#size-cells = <1>;
1805			compatible = "st,stm32mp157-z-pinctrl";
1806			ranges = <0 0x54004000 0x400>;
1807			interrupt-parent = <&exti>;
1808			st,syscfg = <&exti 0x60 0xff>;
1809
1810			gpioz: gpio@54004000 {
1811				gpio-controller;
1812				#gpio-cells = <2>;
1813				interrupt-controller;
1814				#interrupt-cells = <2>;
1815				reg = <0 0x400>;
1816				clocks = <&rcc GPIOZ>;
1817				st,bank-name = "GPIOZ";
1818				st,bank-ioport = <11>;
1819				status = "disabled";
1820			};
1821		};
1822	};
1823
1824	mlahb: ahb {
1825		compatible = "st,mlahb", "simple-bus";
1826		#address-cells = <1>;
1827		#size-cells = <1>;
1828		ranges;
1829		dma-ranges = <0x00000000 0x38000000 0x10000>,
1830			     <0x10000000 0x10000000 0x60000>,
1831			     <0x30000000 0x30000000 0x60000>;
1832
1833		m4_rproc: m4@10000000 {
1834			compatible = "st,stm32mp1-m4";
1835			reg = <0x10000000 0x40000>,
1836			      <0x30000000 0x40000>,
1837			      <0x38000000 0x10000>;
1838			resets = <&rcc MCU_R>;
1839			reset-names = "mcu_rst";
1840			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
1841			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
1842			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
1843			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
1844			status = "disabled";
1845		};
1846	};
1847};
1848