xref: /openbmc/linux/arch/arm/boot/dts/st/stm32mp151.dtsi (revision 6db6b729)
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/stm32mp1-clks.h>
8#include <dt-bindings/reset/stm32mp1-resets.h>
9
10/ {
11	#address-cells = <1>;
12	#size-cells = <1>;
13
14	cpus {
15		#address-cells = <1>;
16		#size-cells = <0>;
17
18		cpu0: cpu@0 {
19			compatible = "arm,cortex-a7";
20			clock-frequency = <650000000>;
21			device_type = "cpu";
22			reg = <0>;
23		};
24	};
25
26	arm-pmu {
27		compatible = "arm,cortex-a7-pmu";
28		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
29		interrupt-affinity = <&cpu0>;
30		interrupt-parent = <&intc>;
31	};
32
33	psci {
34		compatible = "arm,psci-1.0";
35		method = "smc";
36	};
37
38	intc: interrupt-controller@a0021000 {
39		compatible = "arm,cortex-a7-gic";
40		#interrupt-cells = <3>;
41		interrupt-controller;
42		reg = <0xa0021000 0x1000>,
43		      <0xa0022000 0x2000>;
44	};
45
46	timer {
47		compatible = "arm,armv7-timer";
48		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
49			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
50			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
51			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
52		interrupt-parent = <&intc>;
53	};
54
55	clocks {
56		clk_hse: clk-hse {
57			#clock-cells = <0>;
58			compatible = "fixed-clock";
59			clock-frequency = <24000000>;
60		};
61
62		clk_hsi: clk-hsi {
63			#clock-cells = <0>;
64			compatible = "fixed-clock";
65			clock-frequency = <64000000>;
66		};
67
68		clk_lse: clk-lse {
69			#clock-cells = <0>;
70			compatible = "fixed-clock";
71			clock-frequency = <32768>;
72		};
73
74		clk_lsi: clk-lsi {
75			#clock-cells = <0>;
76			compatible = "fixed-clock";
77			clock-frequency = <32000>;
78		};
79
80		clk_csi: clk-csi {
81			#clock-cells = <0>;
82			compatible = "fixed-clock";
83			clock-frequency = <4000000>;
84		};
85	};
86
87	thermal-zones {
88		cpu_thermal: cpu-thermal {
89			polling-delay-passive = <0>;
90			polling-delay = <0>;
91			thermal-sensors = <&dts>;
92
93			trips {
94				cpu_alert1: cpu-alert1 {
95					temperature = <85000>;
96					hysteresis = <0>;
97					type = "passive";
98				};
99
100				cpu-crit {
101					temperature = <120000>;
102					hysteresis = <0>;
103					type = "critical";
104				};
105			};
106
107			cooling-maps {
108			};
109		};
110	};
111
112	booster: regulator-booster {
113		compatible = "st,stm32mp1-booster";
114		st,syscfg = <&syscfg>;
115		status = "disabled";
116	};
117
118	soc {
119		compatible = "simple-bus";
120		#address-cells = <1>;
121		#size-cells = <1>;
122		interrupt-parent = <&intc>;
123		ranges;
124
125		timers2: timer@40000000 {
126			#address-cells = <1>;
127			#size-cells = <0>;
128			compatible = "st,stm32-timers";
129			reg = <0x40000000 0x400>;
130			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
131			interrupt-names = "global";
132			clocks = <&rcc TIM2_K>;
133			clock-names = "int";
134			dmas = <&dmamux1 18 0x400 0x1>,
135			       <&dmamux1 19 0x400 0x1>,
136			       <&dmamux1 20 0x400 0x1>,
137			       <&dmamux1 21 0x400 0x1>,
138			       <&dmamux1 22 0x400 0x1>;
139			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
140			status = "disabled";
141
142			pwm {
143				compatible = "st,stm32-pwm";
144				#pwm-cells = <3>;
145				status = "disabled";
146			};
147
148			timer@1 {
149				compatible = "st,stm32h7-timer-trigger";
150				reg = <1>;
151				status = "disabled";
152			};
153
154			counter {
155				compatible = "st,stm32-timer-counter";
156				status = "disabled";
157			};
158		};
159
160		timers3: timer@40001000 {
161			#address-cells = <1>;
162			#size-cells = <0>;
163			compatible = "st,stm32-timers";
164			reg = <0x40001000 0x400>;
165			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
166			interrupt-names = "global";
167			clocks = <&rcc TIM3_K>;
168			clock-names = "int";
169			dmas = <&dmamux1 23 0x400 0x1>,
170			       <&dmamux1 24 0x400 0x1>,
171			       <&dmamux1 25 0x400 0x1>,
172			       <&dmamux1 26 0x400 0x1>,
173			       <&dmamux1 27 0x400 0x1>,
174			       <&dmamux1 28 0x400 0x1>;
175			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
176			status = "disabled";
177
178			pwm {
179				compatible = "st,stm32-pwm";
180				#pwm-cells = <3>;
181				status = "disabled";
182			};
183
184			timer@2 {
185				compatible = "st,stm32h7-timer-trigger";
186				reg = <2>;
187				status = "disabled";
188			};
189
190			counter {
191				compatible = "st,stm32-timer-counter";
192				status = "disabled";
193			};
194		};
195
196		timers4: timer@40002000 {
197			#address-cells = <1>;
198			#size-cells = <0>;
199			compatible = "st,stm32-timers";
200			reg = <0x40002000 0x400>;
201			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
202			interrupt-names = "global";
203			clocks = <&rcc TIM4_K>;
204			clock-names = "int";
205			dmas = <&dmamux1 29 0x400 0x1>,
206			       <&dmamux1 30 0x400 0x1>,
207			       <&dmamux1 31 0x400 0x1>,
208			       <&dmamux1 32 0x400 0x1>;
209			dma-names = "ch1", "ch2", "ch3", "ch4";
210			status = "disabled";
211
212			pwm {
213				compatible = "st,stm32-pwm";
214				#pwm-cells = <3>;
215				status = "disabled";
216			};
217
218			timer@3 {
219				compatible = "st,stm32h7-timer-trigger";
220				reg = <3>;
221				status = "disabled";
222			};
223
224			counter {
225				compatible = "st,stm32-timer-counter";
226				status = "disabled";
227			};
228		};
229
230		timers5: timer@40003000 {
231			#address-cells = <1>;
232			#size-cells = <0>;
233			compatible = "st,stm32-timers";
234			reg = <0x40003000 0x400>;
235			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
236			interrupt-names = "global";
237			clocks = <&rcc TIM5_K>;
238			clock-names = "int";
239			dmas = <&dmamux1 55 0x400 0x1>,
240			       <&dmamux1 56 0x400 0x1>,
241			       <&dmamux1 57 0x400 0x1>,
242			       <&dmamux1 58 0x400 0x1>,
243			       <&dmamux1 59 0x400 0x1>,
244			       <&dmamux1 60 0x400 0x1>;
245			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
246			status = "disabled";
247
248			pwm {
249				compatible = "st,stm32-pwm";
250				#pwm-cells = <3>;
251				status = "disabled";
252			};
253
254			timer@4 {
255				compatible = "st,stm32h7-timer-trigger";
256				reg = <4>;
257				status = "disabled";
258			};
259
260			counter {
261				compatible = "st,stm32-timer-counter";
262				status = "disabled";
263			};
264		};
265
266		timers6: timer@40004000 {
267			#address-cells = <1>;
268			#size-cells = <0>;
269			compatible = "st,stm32-timers";
270			reg = <0x40004000 0x400>;
271			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
272			interrupt-names = "global";
273			clocks = <&rcc TIM6_K>;
274			clock-names = "int";
275			dmas = <&dmamux1 69 0x400 0x1>;
276			dma-names = "up";
277			status = "disabled";
278
279			timer@5 {
280				compatible = "st,stm32h7-timer-trigger";
281				reg = <5>;
282				status = "disabled";
283			};
284		};
285
286		timers7: timer@40005000 {
287			#address-cells = <1>;
288			#size-cells = <0>;
289			compatible = "st,stm32-timers";
290			reg = <0x40005000 0x400>;
291			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
292			interrupt-names = "global";
293			clocks = <&rcc TIM7_K>;
294			clock-names = "int";
295			dmas = <&dmamux1 70 0x400 0x1>;
296			dma-names = "up";
297			status = "disabled";
298
299			timer@6 {
300				compatible = "st,stm32h7-timer-trigger";
301				reg = <6>;
302				status = "disabled";
303			};
304		};
305
306		timers12: timer@40006000 {
307			#address-cells = <1>;
308			#size-cells = <0>;
309			compatible = "st,stm32-timers";
310			reg = <0x40006000 0x400>;
311			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
312			interrupt-names = "global";
313			clocks = <&rcc TIM12_K>;
314			clock-names = "int";
315			status = "disabled";
316
317			pwm {
318				compatible = "st,stm32-pwm";
319				#pwm-cells = <3>;
320				status = "disabled";
321			};
322
323			timer@11 {
324				compatible = "st,stm32h7-timer-trigger";
325				reg = <11>;
326				status = "disabled";
327			};
328		};
329
330		timers13: timer@40007000 {
331			#address-cells = <1>;
332			#size-cells = <0>;
333			compatible = "st,stm32-timers";
334			reg = <0x40007000 0x400>;
335			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
336			interrupt-names = "global";
337			clocks = <&rcc TIM13_K>;
338			clock-names = "int";
339			status = "disabled";
340
341			pwm {
342				compatible = "st,stm32-pwm";
343				#pwm-cells = <3>;
344				status = "disabled";
345			};
346
347			timer@12 {
348				compatible = "st,stm32h7-timer-trigger";
349				reg = <12>;
350				status = "disabled";
351			};
352		};
353
354		timers14: timer@40008000 {
355			#address-cells = <1>;
356			#size-cells = <0>;
357			compatible = "st,stm32-timers";
358			reg = <0x40008000 0x400>;
359			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
360			interrupt-names = "global";
361			clocks = <&rcc TIM14_K>;
362			clock-names = "int";
363			status = "disabled";
364
365			pwm {
366				compatible = "st,stm32-pwm";
367				#pwm-cells = <3>;
368				status = "disabled";
369			};
370
371			timer@13 {
372				compatible = "st,stm32h7-timer-trigger";
373				reg = <13>;
374				status = "disabled";
375			};
376		};
377
378		lptimer1: timer@40009000 {
379			#address-cells = <1>;
380			#size-cells = <0>;
381			compatible = "st,stm32-lptimer";
382			reg = <0x40009000 0x400>;
383			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
384			clocks = <&rcc LPTIM1_K>;
385			clock-names = "mux";
386			wakeup-source;
387			status = "disabled";
388
389			pwm {
390				compatible = "st,stm32-pwm-lp";
391				#pwm-cells = <3>;
392				status = "disabled";
393			};
394
395			trigger@0 {
396				compatible = "st,stm32-lptimer-trigger";
397				reg = <0>;
398				status = "disabled";
399			};
400
401			counter {
402				compatible = "st,stm32-lptimer-counter";
403				status = "disabled";
404			};
405		};
406
407		spi2: spi@4000b000 {
408			#address-cells = <1>;
409			#size-cells = <0>;
410			compatible = "st,stm32h7-spi";
411			reg = <0x4000b000 0x400>;
412			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
413			clocks = <&rcc SPI2_K>;
414			resets = <&rcc SPI2_R>;
415			dmas = <&dmamux1 39 0x400 0x05>,
416			       <&dmamux1 40 0x400 0x05>;
417			dma-names = "rx", "tx";
418			status = "disabled";
419		};
420
421		i2s2: audio-controller@4000b000 {
422			compatible = "st,stm32h7-i2s";
423			#sound-dai-cells = <0>;
424			reg = <0x4000b000 0x400>;
425			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
426			dmas = <&dmamux1 39 0x400 0x01>,
427			       <&dmamux1 40 0x400 0x01>;
428			dma-names = "rx", "tx";
429			status = "disabled";
430		};
431
432		spi3: spi@4000c000 {
433			#address-cells = <1>;
434			#size-cells = <0>;
435			compatible = "st,stm32h7-spi";
436			reg = <0x4000c000 0x400>;
437			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
438			clocks = <&rcc SPI3_K>;
439			resets = <&rcc SPI3_R>;
440			dmas = <&dmamux1 61 0x400 0x05>,
441			       <&dmamux1 62 0x400 0x05>;
442			dma-names = "rx", "tx";
443			status = "disabled";
444		};
445
446		i2s3: audio-controller@4000c000 {
447			compatible = "st,stm32h7-i2s";
448			#sound-dai-cells = <0>;
449			reg = <0x4000c000 0x400>;
450			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
451			dmas = <&dmamux1 61 0x400 0x01>,
452			       <&dmamux1 62 0x400 0x01>;
453			dma-names = "rx", "tx";
454			status = "disabled";
455		};
456
457		spdifrx: audio-controller@4000d000 {
458			compatible = "st,stm32h7-spdifrx";
459			#sound-dai-cells = <0>;
460			reg = <0x4000d000 0x400>;
461			clocks = <&rcc SPDIF_K>;
462			clock-names = "kclk";
463			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
464			dmas = <&dmamux1 93 0x400 0x01>,
465			       <&dmamux1 94 0x400 0x01>;
466			dma-names = "rx", "rx-ctrl";
467			status = "disabled";
468		};
469
470		usart2: serial@4000e000 {
471			compatible = "st,stm32h7-uart";
472			reg = <0x4000e000 0x400>;
473			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
474			clocks = <&rcc USART2_K>;
475			wakeup-source;
476			dmas = <&dmamux1 43 0x400 0x15>,
477			       <&dmamux1 44 0x400 0x11>;
478			dma-names = "rx", "tx";
479			status = "disabled";
480		};
481
482		usart3: serial@4000f000 {
483			compatible = "st,stm32h7-uart";
484			reg = <0x4000f000 0x400>;
485			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
486			clocks = <&rcc USART3_K>;
487			wakeup-source;
488			dmas = <&dmamux1 45 0x400 0x15>,
489			       <&dmamux1 46 0x400 0x11>;
490			dma-names = "rx", "tx";
491			status = "disabled";
492		};
493
494		uart4: serial@40010000 {
495			compatible = "st,stm32h7-uart";
496			reg = <0x40010000 0x400>;
497			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
498			clocks = <&rcc UART4_K>;
499			wakeup-source;
500			dmas = <&dmamux1 63 0x400 0x15>,
501			       <&dmamux1 64 0x400 0x11>;
502			dma-names = "rx", "tx";
503			status = "disabled";
504		};
505
506		uart5: serial@40011000 {
507			compatible = "st,stm32h7-uart";
508			reg = <0x40011000 0x400>;
509			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
510			clocks = <&rcc UART5_K>;
511			wakeup-source;
512			dmas = <&dmamux1 65 0x400 0x15>,
513			       <&dmamux1 66 0x400 0x11>;
514			dma-names = "rx", "tx";
515			status = "disabled";
516		};
517
518		i2c1: i2c@40012000 {
519			compatible = "st,stm32mp15-i2c";
520			reg = <0x40012000 0x400>;
521			interrupt-names = "event", "error";
522			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
523				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
524			clocks = <&rcc I2C1_K>;
525			resets = <&rcc I2C1_R>;
526			#address-cells = <1>;
527			#size-cells = <0>;
528			st,syscfg-fmp = <&syscfg 0x4 0x1>;
529			wakeup-source;
530			i2c-analog-filter;
531			status = "disabled";
532		};
533
534		i2c2: i2c@40013000 {
535			compatible = "st,stm32mp15-i2c";
536			reg = <0x40013000 0x400>;
537			interrupt-names = "event", "error";
538			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
539				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
540			clocks = <&rcc I2C2_K>;
541			resets = <&rcc I2C2_R>;
542			#address-cells = <1>;
543			#size-cells = <0>;
544			st,syscfg-fmp = <&syscfg 0x4 0x2>;
545			wakeup-source;
546			i2c-analog-filter;
547			status = "disabled";
548		};
549
550		i2c3: i2c@40014000 {
551			compatible = "st,stm32mp15-i2c";
552			reg = <0x40014000 0x400>;
553			interrupt-names = "event", "error";
554			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
555				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
556			clocks = <&rcc I2C3_K>;
557			resets = <&rcc I2C3_R>;
558			#address-cells = <1>;
559			#size-cells = <0>;
560			st,syscfg-fmp = <&syscfg 0x4 0x4>;
561			wakeup-source;
562			i2c-analog-filter;
563			status = "disabled";
564		};
565
566		i2c5: i2c@40015000 {
567			compatible = "st,stm32mp15-i2c";
568			reg = <0x40015000 0x400>;
569			interrupt-names = "event", "error";
570			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
571				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
572			clocks = <&rcc I2C5_K>;
573			resets = <&rcc I2C5_R>;
574			#address-cells = <1>;
575			#size-cells = <0>;
576			st,syscfg-fmp = <&syscfg 0x4 0x10>;
577			wakeup-source;
578			i2c-analog-filter;
579			status = "disabled";
580		};
581
582		cec: cec@40016000 {
583			compatible = "st,stm32-cec";
584			reg = <0x40016000 0x400>;
585			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
586			clocks = <&rcc CEC_K>, <&rcc CEC>;
587			clock-names = "cec", "hdmi-cec";
588			status = "disabled";
589		};
590
591		dac: dac@40017000 {
592			compatible = "st,stm32h7-dac-core";
593			reg = <0x40017000 0x400>;
594			clocks = <&rcc DAC12>;
595			clock-names = "pclk";
596			#address-cells = <1>;
597			#size-cells = <0>;
598			status = "disabled";
599
600			dac1: dac@1 {
601				compatible = "st,stm32-dac";
602				#io-channel-cells = <1>;
603				reg = <1>;
604				status = "disabled";
605			};
606
607			dac2: dac@2 {
608				compatible = "st,stm32-dac";
609				#io-channel-cells = <1>;
610				reg = <2>;
611				status = "disabled";
612			};
613		};
614
615		uart7: serial@40018000 {
616			compatible = "st,stm32h7-uart";
617			reg = <0x40018000 0x400>;
618			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
619			clocks = <&rcc UART7_K>;
620			wakeup-source;
621			dmas = <&dmamux1 79 0x400 0x15>,
622			       <&dmamux1 80 0x400 0x11>;
623			dma-names = "rx", "tx";
624			status = "disabled";
625		};
626
627		uart8: serial@40019000 {
628			compatible = "st,stm32h7-uart";
629			reg = <0x40019000 0x400>;
630			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
631			clocks = <&rcc UART8_K>;
632			wakeup-source;
633			dmas = <&dmamux1 81 0x400 0x15>,
634			       <&dmamux1 82 0x400 0x11>;
635			dma-names = "rx", "tx";
636			status = "disabled";
637		};
638
639		timers1: timer@44000000 {
640			#address-cells = <1>;
641			#size-cells = <0>;
642			compatible = "st,stm32-timers";
643			reg = <0x44000000 0x400>;
644			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
645				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
646				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
647				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
648			interrupt-names = "brk", "up", "trg-com", "cc";
649			clocks = <&rcc TIM1_K>;
650			clock-names = "int";
651			dmas = <&dmamux1 11 0x400 0x1>,
652			       <&dmamux1 12 0x400 0x1>,
653			       <&dmamux1 13 0x400 0x1>,
654			       <&dmamux1 14 0x400 0x1>,
655			       <&dmamux1 15 0x400 0x1>,
656			       <&dmamux1 16 0x400 0x1>,
657			       <&dmamux1 17 0x400 0x1>;
658			dma-names = "ch1", "ch2", "ch3", "ch4",
659				    "up", "trig", "com";
660			status = "disabled";
661
662			pwm {
663				compatible = "st,stm32-pwm";
664				#pwm-cells = <3>;
665				status = "disabled";
666			};
667
668			timer@0 {
669				compatible = "st,stm32h7-timer-trigger";
670				reg = <0>;
671				status = "disabled";
672			};
673
674			counter {
675				compatible = "st,stm32-timer-counter";
676				status = "disabled";
677			};
678		};
679
680		timers8: timer@44001000 {
681			#address-cells = <1>;
682			#size-cells = <0>;
683			compatible = "st,stm32-timers";
684			reg = <0x44001000 0x400>;
685			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
686				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
687				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
688				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
689			interrupt-names = "brk", "up", "trg-com", "cc";
690			clocks = <&rcc TIM8_K>;
691			clock-names = "int";
692			dmas = <&dmamux1 47 0x400 0x1>,
693			       <&dmamux1 48 0x400 0x1>,
694			       <&dmamux1 49 0x400 0x1>,
695			       <&dmamux1 50 0x400 0x1>,
696			       <&dmamux1 51 0x400 0x1>,
697			       <&dmamux1 52 0x400 0x1>,
698			       <&dmamux1 53 0x400 0x1>;
699			dma-names = "ch1", "ch2", "ch3", "ch4",
700				    "up", "trig", "com";
701			status = "disabled";
702
703			pwm {
704				compatible = "st,stm32-pwm";
705				#pwm-cells = <3>;
706				status = "disabled";
707			};
708
709			timer@7 {
710				compatible = "st,stm32h7-timer-trigger";
711				reg = <7>;
712				status = "disabled";
713			};
714
715			counter {
716				compatible = "st,stm32-timer-counter";
717				status = "disabled";
718			};
719		};
720
721		usart6: serial@44003000 {
722			compatible = "st,stm32h7-uart";
723			reg = <0x44003000 0x400>;
724			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
725			clocks = <&rcc USART6_K>;
726			wakeup-source;
727			dmas = <&dmamux1 71 0x400 0x15>,
728			       <&dmamux1 72 0x400 0x11>;
729			dma-names = "rx", "tx";
730			status = "disabled";
731		};
732
733		spi1: spi@44004000 {
734			#address-cells = <1>;
735			#size-cells = <0>;
736			compatible = "st,stm32h7-spi";
737			reg = <0x44004000 0x400>;
738			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
739			clocks = <&rcc SPI1_K>;
740			resets = <&rcc SPI1_R>;
741			dmas = <&dmamux1 37 0x400 0x05>,
742			       <&dmamux1 38 0x400 0x05>;
743			dma-names = "rx", "tx";
744			status = "disabled";
745		};
746
747		i2s1: audio-controller@44004000 {
748			compatible = "st,stm32h7-i2s";
749			#sound-dai-cells = <0>;
750			reg = <0x44004000 0x400>;
751			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
752			dmas = <&dmamux1 37 0x400 0x01>,
753			       <&dmamux1 38 0x400 0x01>;
754			dma-names = "rx", "tx";
755			status = "disabled";
756		};
757
758		spi4: spi@44005000 {
759			#address-cells = <1>;
760			#size-cells = <0>;
761			compatible = "st,stm32h7-spi";
762			reg = <0x44005000 0x400>;
763			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
764			clocks = <&rcc SPI4_K>;
765			resets = <&rcc SPI4_R>;
766			dmas = <&dmamux1 83 0x400 0x05>,
767			       <&dmamux1 84 0x400 0x05>;
768			dma-names = "rx", "tx";
769			status = "disabled";
770		};
771
772		timers15: timer@44006000 {
773			#address-cells = <1>;
774			#size-cells = <0>;
775			compatible = "st,stm32-timers";
776			reg = <0x44006000 0x400>;
777			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
778			interrupt-names = "global";
779			clocks = <&rcc TIM15_K>;
780			clock-names = "int";
781			dmas = <&dmamux1 105 0x400 0x1>,
782			       <&dmamux1 106 0x400 0x1>,
783			       <&dmamux1 107 0x400 0x1>,
784			       <&dmamux1 108 0x400 0x1>;
785			dma-names = "ch1", "up", "trig", "com";
786			status = "disabled";
787
788			pwm {
789				compatible = "st,stm32-pwm";
790				#pwm-cells = <3>;
791				status = "disabled";
792			};
793
794			timer@14 {
795				compatible = "st,stm32h7-timer-trigger";
796				reg = <14>;
797				status = "disabled";
798			};
799		};
800
801		timers16: timer@44007000 {
802			#address-cells = <1>;
803			#size-cells = <0>;
804			compatible = "st,stm32-timers";
805			reg = <0x44007000 0x400>;
806			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
807			interrupt-names = "global";
808			clocks = <&rcc TIM16_K>;
809			clock-names = "int";
810			dmas = <&dmamux1 109 0x400 0x1>,
811			       <&dmamux1 110 0x400 0x1>;
812			dma-names = "ch1", "up";
813			status = "disabled";
814
815			pwm {
816				compatible = "st,stm32-pwm";
817				#pwm-cells = <3>;
818				status = "disabled";
819			};
820			timer@15 {
821				compatible = "st,stm32h7-timer-trigger";
822				reg = <15>;
823				status = "disabled";
824			};
825		};
826
827		timers17: timer@44008000 {
828			#address-cells = <1>;
829			#size-cells = <0>;
830			compatible = "st,stm32-timers";
831			reg = <0x44008000 0x400>;
832			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
833			interrupt-names = "global";
834			clocks = <&rcc TIM17_K>;
835			clock-names = "int";
836			dmas = <&dmamux1 111 0x400 0x1>,
837			       <&dmamux1 112 0x400 0x1>;
838			dma-names = "ch1", "up";
839			status = "disabled";
840
841			pwm {
842				compatible = "st,stm32-pwm";
843				#pwm-cells = <3>;
844				status = "disabled";
845			};
846
847			timer@16 {
848				compatible = "st,stm32h7-timer-trigger";
849				reg = <16>;
850				status = "disabled";
851			};
852		};
853
854		spi5: spi@44009000 {
855			#address-cells = <1>;
856			#size-cells = <0>;
857			compatible = "st,stm32h7-spi";
858			reg = <0x44009000 0x400>;
859			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
860			clocks = <&rcc SPI5_K>;
861			resets = <&rcc SPI5_R>;
862			dmas = <&dmamux1 85 0x400 0x05>,
863			       <&dmamux1 86 0x400 0x05>;
864			dma-names = "rx", "tx";
865			status = "disabled";
866		};
867
868		sai1: sai@4400a000 {
869			compatible = "st,stm32h7-sai";
870			#address-cells = <1>;
871			#size-cells = <1>;
872			ranges = <0 0x4400a000 0x400>;
873			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
874			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
875			resets = <&rcc SAI1_R>;
876			status = "disabled";
877
878			sai1a: audio-controller@4400a004 {
879				#sound-dai-cells = <0>;
880
881				compatible = "st,stm32-sai-sub-a";
882				reg = <0x4 0x20>;
883				clocks = <&rcc SAI1_K>;
884				clock-names = "sai_ck";
885				dmas = <&dmamux1 87 0x400 0x01>;
886				status = "disabled";
887			};
888
889			sai1b: audio-controller@4400a024 {
890				#sound-dai-cells = <0>;
891				compatible = "st,stm32-sai-sub-b";
892				reg = <0x24 0x20>;
893				clocks = <&rcc SAI1_K>;
894				clock-names = "sai_ck";
895				dmas = <&dmamux1 88 0x400 0x01>;
896				status = "disabled";
897			};
898		};
899
900		sai2: sai@4400b000 {
901			compatible = "st,stm32h7-sai";
902			#address-cells = <1>;
903			#size-cells = <1>;
904			ranges = <0 0x4400b000 0x400>;
905			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
906			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
907			resets = <&rcc SAI2_R>;
908			status = "disabled";
909
910			sai2a: audio-controller@4400b004 {
911				#sound-dai-cells = <0>;
912				compatible = "st,stm32-sai-sub-a";
913				reg = <0x4 0x20>;
914				clocks = <&rcc SAI2_K>;
915				clock-names = "sai_ck";
916				dmas = <&dmamux1 89 0x400 0x01>;
917				status = "disabled";
918			};
919
920			sai2b: audio-controller@4400b024 {
921				#sound-dai-cells = <0>;
922				compatible = "st,stm32-sai-sub-b";
923				reg = <0x24 0x20>;
924				clocks = <&rcc SAI2_K>;
925				clock-names = "sai_ck";
926				dmas = <&dmamux1 90 0x400 0x01>;
927				status = "disabled";
928			};
929		};
930
931		sai3: sai@4400c000 {
932			compatible = "st,stm32h7-sai";
933			#address-cells = <1>;
934			#size-cells = <1>;
935			ranges = <0 0x4400c000 0x400>;
936			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
937			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
938			resets = <&rcc SAI3_R>;
939			status = "disabled";
940
941			sai3a: audio-controller@4400c004 {
942				#sound-dai-cells = <0>;
943				compatible = "st,stm32-sai-sub-a";
944				reg = <0x04 0x20>;
945				clocks = <&rcc SAI3_K>;
946				clock-names = "sai_ck";
947				dmas = <&dmamux1 113 0x400 0x01>;
948				status = "disabled";
949			};
950
951			sai3b: audio-controller@4400c024 {
952				#sound-dai-cells = <0>;
953				compatible = "st,stm32-sai-sub-b";
954				reg = <0x24 0x20>;
955				clocks = <&rcc SAI3_K>;
956				clock-names = "sai_ck";
957				dmas = <&dmamux1 114 0x400 0x01>;
958				status = "disabled";
959			};
960		};
961
962		dfsdm: dfsdm@4400d000 {
963			compatible = "st,stm32mp1-dfsdm";
964			reg = <0x4400d000 0x800>;
965			clocks = <&rcc DFSDM_K>;
966			clock-names = "dfsdm";
967			#address-cells = <1>;
968			#size-cells = <0>;
969			status = "disabled";
970
971			dfsdm0: filter@0 {
972				compatible = "st,stm32-dfsdm-adc";
973				#io-channel-cells = <1>;
974				reg = <0>;
975				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
976				dmas = <&dmamux1 101 0x400 0x01>;
977				dma-names = "rx";
978				status = "disabled";
979			};
980
981			dfsdm1: filter@1 {
982				compatible = "st,stm32-dfsdm-adc";
983				#io-channel-cells = <1>;
984				reg = <1>;
985				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
986				dmas = <&dmamux1 102 0x400 0x01>;
987				dma-names = "rx";
988				status = "disabled";
989			};
990
991			dfsdm2: filter@2 {
992				compatible = "st,stm32-dfsdm-adc";
993				#io-channel-cells = <1>;
994				reg = <2>;
995				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
996				dmas = <&dmamux1 103 0x400 0x01>;
997				dma-names = "rx";
998				status = "disabled";
999			};
1000
1001			dfsdm3: filter@3 {
1002				compatible = "st,stm32-dfsdm-adc";
1003				#io-channel-cells = <1>;
1004				reg = <3>;
1005				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
1006				dmas = <&dmamux1 104 0x400 0x01>;
1007				dma-names = "rx";
1008				status = "disabled";
1009			};
1010
1011			dfsdm4: filter@4 {
1012				compatible = "st,stm32-dfsdm-adc";
1013				#io-channel-cells = <1>;
1014				reg = <4>;
1015				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
1016				dmas = <&dmamux1 91 0x400 0x01>;
1017				dma-names = "rx";
1018				status = "disabled";
1019			};
1020
1021			dfsdm5: filter@5 {
1022				compatible = "st,stm32-dfsdm-adc";
1023				#io-channel-cells = <1>;
1024				reg = <5>;
1025				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
1026				dmas = <&dmamux1 92 0x400 0x01>;
1027				dma-names = "rx";
1028				status = "disabled";
1029			};
1030		};
1031
1032		dma1: dma-controller@48000000 {
1033			compatible = "st,stm32-dma";
1034			reg = <0x48000000 0x400>;
1035			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
1036				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1037				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
1038				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
1039				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
1040				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
1041				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
1042				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
1043			clocks = <&rcc DMA1>;
1044			resets = <&rcc DMA1_R>;
1045			#dma-cells = <4>;
1046			st,mem2mem;
1047			dma-requests = <8>;
1048		};
1049
1050		dma2: dma-controller@48001000 {
1051			compatible = "st,stm32-dma";
1052			reg = <0x48001000 0x400>;
1053			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
1054				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
1055				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
1056				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
1057				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
1058				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
1059				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1060				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1061			clocks = <&rcc DMA2>;
1062			resets = <&rcc DMA2_R>;
1063			#dma-cells = <4>;
1064			st,mem2mem;
1065			dma-requests = <8>;
1066		};
1067
1068		dmamux1: dma-router@48002000 {
1069			compatible = "st,stm32h7-dmamux";
1070			reg = <0x48002000 0x40>;
1071			#dma-cells = <3>;
1072			dma-requests = <128>;
1073			dma-masters = <&dma1 &dma2>;
1074			dma-channels = <16>;
1075			clocks = <&rcc DMAMUX>;
1076			resets = <&rcc DMAMUX_R>;
1077		};
1078
1079		adc: adc@48003000 {
1080			compatible = "st,stm32mp1-adc-core";
1081			reg = <0x48003000 0x400>;
1082			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
1083				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
1084			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
1085			clock-names = "bus", "adc";
1086			interrupt-controller;
1087			st,syscfg = <&syscfg>;
1088			#interrupt-cells = <1>;
1089			#address-cells = <1>;
1090			#size-cells = <0>;
1091			status = "disabled";
1092
1093			adc1: adc@0 {
1094				compatible = "st,stm32mp1-adc";
1095				#io-channel-cells = <1>;
1096				#address-cells = <1>;
1097				#size-cells = <0>;
1098				reg = <0x0>;
1099				interrupt-parent = <&adc>;
1100				interrupts = <0>;
1101				dmas = <&dmamux1 9 0x400 0x01>;
1102				dma-names = "rx";
1103				status = "disabled";
1104			};
1105
1106			adc2: adc@100 {
1107				compatible = "st,stm32mp1-adc";
1108				#io-channel-cells = <1>;
1109				#address-cells = <1>;
1110				#size-cells = <0>;
1111				reg = <0x100>;
1112				interrupt-parent = <&adc>;
1113				interrupts = <1>;
1114				dmas = <&dmamux1 10 0x400 0x01>;
1115				dma-names = "rx";
1116				nvmem-cells = <&vrefint>;
1117				nvmem-cell-names = "vrefint";
1118				status = "disabled";
1119				channel@13 {
1120					reg = <13>;
1121					label = "vrefint";
1122				};
1123				channel@14 {
1124					reg = <14>;
1125					label = "vddcore";
1126				};
1127			};
1128		};
1129
1130		sdmmc3: mmc@48004000 {
1131			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1132			arm,primecell-periphid = <0x00253180>;
1133			reg = <0x48004000 0x400>;
1134			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
1135			clocks = <&rcc SDMMC3_K>;
1136			clock-names = "apb_pclk";
1137			resets = <&rcc SDMMC3_R>;
1138			cap-sd-highspeed;
1139			cap-mmc-highspeed;
1140			max-frequency = <120000000>;
1141			status = "disabled";
1142		};
1143
1144		usbotg_hs: usb-otg@49000000 {
1145			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
1146			reg = <0x49000000 0x10000>;
1147			clocks = <&rcc USBO_K>, <&usbphyc>;
1148			clock-names = "otg", "utmi";
1149			resets = <&rcc USBO_R>;
1150			reset-names = "dwc2";
1151			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1152			g-rx-fifo-size = <512>;
1153			g-np-tx-fifo-size = <32>;
1154			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
1155			dr_mode = "otg";
1156			otg-rev = <0x200>;
1157			usb33d-supply = <&usb33>;
1158			status = "disabled";
1159		};
1160
1161		ipcc: mailbox@4c001000 {
1162			compatible = "st,stm32mp1-ipcc";
1163			#mbox-cells = <1>;
1164			reg = <0x4c001000 0x400>;
1165			st,proc-id = <0>;
1166			interrupts-extended =
1167				<&exti 61 1>,
1168				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1169			interrupt-names = "rx", "tx";
1170			clocks = <&rcc IPCC>;
1171			wakeup-source;
1172			status = "disabled";
1173		};
1174
1175		dcmi: dcmi@4c006000 {
1176			compatible = "st,stm32-dcmi";
1177			reg = <0x4c006000 0x400>;
1178			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1179			resets = <&rcc CAMITF_R>;
1180			clocks = <&rcc DCMI>;
1181			clock-names = "mclk";
1182			dmas = <&dmamux1 75 0x400 0x01>;
1183			dma-names = "tx";
1184			status = "disabled";
1185		};
1186
1187		rcc: rcc@50000000 {
1188			compatible = "st,stm32mp1-rcc", "syscon";
1189			reg = <0x50000000 0x1000>;
1190			#clock-cells = <1>;
1191			#reset-cells = <1>;
1192		};
1193
1194		pwr_regulators: pwr@50001000 {
1195			compatible = "st,stm32mp1,pwr-reg";
1196			reg = <0x50001000 0x10>;
1197
1198			reg11: reg11 {
1199				regulator-name = "reg11";
1200				regulator-min-microvolt = <1100000>;
1201				regulator-max-microvolt = <1100000>;
1202			};
1203
1204			reg18: reg18 {
1205				regulator-name = "reg18";
1206				regulator-min-microvolt = <1800000>;
1207				regulator-max-microvolt = <1800000>;
1208			};
1209
1210			usb33: usb33 {
1211				regulator-name = "usb33";
1212				regulator-min-microvolt = <3300000>;
1213				regulator-max-microvolt = <3300000>;
1214			};
1215		};
1216
1217		pwr_mcu: pwr_mcu@50001014 {
1218			compatible = "st,stm32mp151-pwr-mcu", "syscon";
1219			reg = <0x50001014 0x4>;
1220		};
1221
1222		exti: interrupt-controller@5000d000 {
1223			compatible = "st,stm32mp1-exti", "syscon";
1224			interrupt-controller;
1225			#interrupt-cells = <2>;
1226			reg = <0x5000d000 0x400>;
1227		};
1228
1229		syscfg: syscon@50020000 {
1230			compatible = "st,stm32mp157-syscfg", "syscon";
1231			reg = <0x50020000 0x400>;
1232			clocks = <&rcc SYSCFG>;
1233		};
1234
1235		lptimer2: timer@50021000 {
1236			#address-cells = <1>;
1237			#size-cells = <0>;
1238			compatible = "st,stm32-lptimer";
1239			reg = <0x50021000 0x400>;
1240			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
1241			clocks = <&rcc LPTIM2_K>;
1242			clock-names = "mux";
1243			wakeup-source;
1244			status = "disabled";
1245
1246			pwm {
1247				compatible = "st,stm32-pwm-lp";
1248				#pwm-cells = <3>;
1249				status = "disabled";
1250			};
1251
1252			trigger@1 {
1253				compatible = "st,stm32-lptimer-trigger";
1254				reg = <1>;
1255				status = "disabled";
1256			};
1257
1258			counter {
1259				compatible = "st,stm32-lptimer-counter";
1260				status = "disabled";
1261			};
1262		};
1263
1264		lptimer3: timer@50022000 {
1265			#address-cells = <1>;
1266			#size-cells = <0>;
1267			compatible = "st,stm32-lptimer";
1268			reg = <0x50022000 0x400>;
1269			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
1270			clocks = <&rcc LPTIM3_K>;
1271			clock-names = "mux";
1272			wakeup-source;
1273			status = "disabled";
1274
1275			pwm {
1276				compatible = "st,stm32-pwm-lp";
1277				#pwm-cells = <3>;
1278				status = "disabled";
1279			};
1280
1281			trigger@2 {
1282				compatible = "st,stm32-lptimer-trigger";
1283				reg = <2>;
1284				status = "disabled";
1285			};
1286		};
1287
1288		lptimer4: timer@50023000 {
1289			compatible = "st,stm32-lptimer";
1290			reg = <0x50023000 0x400>;
1291			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
1292			clocks = <&rcc LPTIM4_K>;
1293			clock-names = "mux";
1294			wakeup-source;
1295			status = "disabled";
1296
1297			pwm {
1298				compatible = "st,stm32-pwm-lp";
1299				#pwm-cells = <3>;
1300				status = "disabled";
1301			};
1302		};
1303
1304		lptimer5: timer@50024000 {
1305			compatible = "st,stm32-lptimer";
1306			reg = <0x50024000 0x400>;
1307			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
1308			clocks = <&rcc LPTIM5_K>;
1309			clock-names = "mux";
1310			wakeup-source;
1311			status = "disabled";
1312
1313			pwm {
1314				compatible = "st,stm32-pwm-lp";
1315				#pwm-cells = <3>;
1316				status = "disabled";
1317			};
1318		};
1319
1320		vrefbuf: vrefbuf@50025000 {
1321			compatible = "st,stm32-vrefbuf";
1322			reg = <0x50025000 0x8>;
1323			regulator-min-microvolt = <1500000>;
1324			regulator-max-microvolt = <2500000>;
1325			clocks = <&rcc VREF>;
1326			status = "disabled";
1327		};
1328
1329		sai4: sai@50027000 {
1330			compatible = "st,stm32h7-sai";
1331			#address-cells = <1>;
1332			#size-cells = <1>;
1333			ranges = <0 0x50027000 0x400>;
1334			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
1335			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
1336			resets = <&rcc SAI4_R>;
1337			status = "disabled";
1338
1339			sai4a: audio-controller@50027004 {
1340				#sound-dai-cells = <0>;
1341				compatible = "st,stm32-sai-sub-a";
1342				reg = <0x04 0x20>;
1343				clocks = <&rcc SAI4_K>;
1344				clock-names = "sai_ck";
1345				dmas = <&dmamux1 99 0x400 0x01>;
1346				status = "disabled";
1347			};
1348
1349			sai4b: audio-controller@50027024 {
1350				#sound-dai-cells = <0>;
1351				compatible = "st,stm32-sai-sub-b";
1352				reg = <0x24 0x20>;
1353				clocks = <&rcc SAI4_K>;
1354				clock-names = "sai_ck";
1355				dmas = <&dmamux1 100 0x400 0x01>;
1356				status = "disabled";
1357			};
1358		};
1359
1360		dts: thermal@50028000 {
1361			compatible = "st,stm32-thermal";
1362			reg = <0x50028000 0x100>;
1363			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
1364			clocks = <&rcc TMPSENS>;
1365			clock-names = "pclk";
1366			#thermal-sensor-cells = <0>;
1367			status = "disabled";
1368		};
1369
1370		hash1: hash@54002000 {
1371			compatible = "st,stm32f756-hash";
1372			reg = <0x54002000 0x400>;
1373			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1374			clocks = <&rcc HASH1>;
1375			resets = <&rcc HASH1_R>;
1376			dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
1377			dma-names = "in";
1378			dma-maxburst = <2>;
1379			status = "disabled";
1380		};
1381
1382		rng1: rng@54003000 {
1383			compatible = "st,stm32-rng";
1384			reg = <0x54003000 0x400>;
1385			clocks = <&rcc RNG1_K>;
1386			resets = <&rcc RNG1_R>;
1387			status = "disabled";
1388		};
1389
1390		mdma1: dma-controller@58000000 {
1391			compatible = "st,stm32h7-mdma";
1392			reg = <0x58000000 0x1000>;
1393			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1394			clocks = <&rcc MDMA>;
1395			resets = <&rcc MDMA_R>;
1396			#dma-cells = <5>;
1397			dma-channels = <32>;
1398			dma-requests = <48>;
1399		};
1400
1401		fmc: memory-controller@58002000 {
1402			#address-cells = <2>;
1403			#size-cells = <1>;
1404			compatible = "st,stm32mp1-fmc2-ebi";
1405			reg = <0x58002000 0x1000>;
1406			clocks = <&rcc FMC_K>;
1407			resets = <&rcc FMC_R>;
1408			status = "disabled";
1409
1410			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
1411				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
1412				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
1413				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
1414				 <4 0 0x80000000 0x10000000>; /* NAND */
1415
1416			nand-controller@4,0 {
1417				#address-cells = <1>;
1418				#size-cells = <0>;
1419				compatible = "st,stm32mp1-fmc2-nfc";
1420				reg = <4 0x00000000 0x1000>,
1421				      <4 0x08010000 0x1000>,
1422				      <4 0x08020000 0x1000>,
1423				      <4 0x01000000 0x1000>,
1424				      <4 0x09010000 0x1000>,
1425				      <4 0x09020000 0x1000>;
1426				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1427				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
1428				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
1429				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
1430				dma-names = "tx", "rx", "ecc";
1431				status = "disabled";
1432			};
1433		};
1434
1435		qspi: spi@58003000 {
1436			compatible = "st,stm32f469-qspi";
1437			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
1438			reg-names = "qspi", "qspi_mm";
1439			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
1440			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
1441			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
1442			dma-names = "tx", "rx";
1443			clocks = <&rcc QSPI_K>;
1444			resets = <&rcc QSPI_R>;
1445			#address-cells = <1>;
1446			#size-cells = <0>;
1447			status = "disabled";
1448		};
1449
1450		sdmmc1: mmc@58005000 {
1451			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1452			arm,primecell-periphid = <0x00253180>;
1453			reg = <0x58005000 0x1000>;
1454			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1455			clocks = <&rcc SDMMC1_K>;
1456			clock-names = "apb_pclk";
1457			resets = <&rcc SDMMC1_R>;
1458			cap-sd-highspeed;
1459			cap-mmc-highspeed;
1460			max-frequency = <120000000>;
1461			status = "disabled";
1462		};
1463
1464		sdmmc2: mmc@58007000 {
1465			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
1466			arm,primecell-periphid = <0x00253180>;
1467			reg = <0x58007000 0x1000>;
1468			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
1469			clocks = <&rcc SDMMC2_K>;
1470			clock-names = "apb_pclk";
1471			resets = <&rcc SDMMC2_R>;
1472			cap-sd-highspeed;
1473			cap-mmc-highspeed;
1474			max-frequency = <120000000>;
1475			status = "disabled";
1476		};
1477
1478		crc1: crc@58009000 {
1479			compatible = "st,stm32f7-crc";
1480			reg = <0x58009000 0x400>;
1481			clocks = <&rcc CRC1>;
1482			status = "disabled";
1483		};
1484
1485		ethernet0: ethernet@5800a000 {
1486			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
1487			reg = <0x5800a000 0x2000>;
1488			reg-names = "stmmaceth";
1489			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1490			interrupt-names = "macirq";
1491			clock-names = "stmmaceth",
1492				      "mac-clk-tx",
1493				      "mac-clk-rx",
1494				      "eth-ck",
1495				      "ptp_ref",
1496				      "ethstp";
1497			clocks = <&rcc ETHMAC>,
1498				 <&rcc ETHTX>,
1499				 <&rcc ETHRX>,
1500				 <&rcc ETHCK_K>,
1501				 <&rcc ETHPTP_K>,
1502				 <&rcc ETHSTP>;
1503			st,syscon = <&syscfg 0x4>;
1504			snps,mixed-burst;
1505			snps,pbl = <2>;
1506			snps,en-tx-lpi-clockgating;
1507			snps,axi-config = <&stmmac_axi_config_0>;
1508			snps,tso;
1509			status = "disabled";
1510
1511			stmmac_axi_config_0: stmmac-axi-config {
1512				snps,wr_osr_lmt = <0x7>;
1513				snps,rd_osr_lmt = <0x7>;
1514				snps,blen = <0 0 0 0 16 8 4>;
1515			};
1516		};
1517
1518		usbh_ohci: usb@5800c000 {
1519			compatible = "generic-ohci";
1520			reg = <0x5800c000 0x1000>;
1521			clocks = <&usbphyc>, <&rcc USBH>;
1522			resets = <&rcc USBH_R>;
1523			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
1524			status = "disabled";
1525		};
1526
1527		usbh_ehci: usb@5800d000 {
1528			compatible = "generic-ehci";
1529			reg = <0x5800d000 0x1000>;
1530			clocks = <&usbphyc>, <&rcc USBH>;
1531			resets = <&rcc USBH_R>;
1532			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1533			companion = <&usbh_ohci>;
1534			status = "disabled";
1535		};
1536
1537		ltdc: display-controller@5a001000 {
1538			compatible = "st,stm32-ltdc";
1539			reg = <0x5a001000 0x400>;
1540			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1541				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1542			clocks = <&rcc LTDC_PX>;
1543			clock-names = "lcd";
1544			resets = <&rcc LTDC_R>;
1545			status = "disabled";
1546		};
1547
1548		iwdg2: watchdog@5a002000 {
1549			compatible = "st,stm32mp1-iwdg";
1550			reg = <0x5a002000 0x400>;
1551			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
1552			clock-names = "pclk", "lsi";
1553			status = "disabled";
1554		};
1555
1556		usbphyc: usbphyc@5a006000 {
1557			#address-cells = <1>;
1558			#size-cells = <0>;
1559			#clock-cells = <0>;
1560			compatible = "st,stm32mp1-usbphyc";
1561			reg = <0x5a006000 0x1000>;
1562			clocks = <&rcc USBPHY_K>;
1563			resets = <&rcc USBPHY_R>;
1564			vdda1v1-supply = <&reg11>;
1565			vdda1v8-supply = <&reg18>;
1566			status = "disabled";
1567
1568			usbphyc_port0: usb-phy@0 {
1569				#phy-cells = <0>;
1570				reg = <0>;
1571			};
1572
1573			usbphyc_port1: usb-phy@1 {
1574				#phy-cells = <1>;
1575				reg = <1>;
1576			};
1577		};
1578
1579		usart1: serial@5c000000 {
1580			compatible = "st,stm32h7-uart";
1581			reg = <0x5c000000 0x400>;
1582			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
1583			clocks = <&rcc USART1_K>;
1584			wakeup-source;
1585			status = "disabled";
1586		};
1587
1588		spi6: spi@5c001000 {
1589			#address-cells = <1>;
1590			#size-cells = <0>;
1591			compatible = "st,stm32h7-spi";
1592			reg = <0x5c001000 0x400>;
1593			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1594			clocks = <&rcc SPI6_K>;
1595			resets = <&rcc SPI6_R>;
1596			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
1597			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
1598			dma-names = "rx", "tx";
1599			status = "disabled";
1600		};
1601
1602		i2c4: i2c@5c002000 {
1603			compatible = "st,stm32mp15-i2c";
1604			reg = <0x5c002000 0x400>;
1605			interrupt-names = "event", "error";
1606			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1607				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1608			clocks = <&rcc I2C4_K>;
1609			resets = <&rcc I2C4_R>;
1610			#address-cells = <1>;
1611			#size-cells = <0>;
1612			st,syscfg-fmp = <&syscfg 0x4 0x8>;
1613			wakeup-source;
1614			i2c-analog-filter;
1615			status = "disabled";
1616		};
1617
1618		rtc: rtc@5c004000 {
1619			compatible = "st,stm32mp1-rtc";
1620			reg = <0x5c004000 0x400>;
1621			clocks = <&rcc RTCAPB>, <&rcc RTC>;
1622			clock-names = "pclk", "rtc_ck";
1623			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
1624			status = "disabled";
1625		};
1626
1627		bsec: efuse@5c005000 {
1628			compatible = "st,stm32mp15-bsec";
1629			reg = <0x5c005000 0x400>;
1630			#address-cells = <1>;
1631			#size-cells = <1>;
1632			part_number_otp: part-number-otp@4 {
1633				reg = <0x4 0x1>;
1634			};
1635			vrefint: vrefin-cal@52 {
1636				reg = <0x52 0x2>;
1637			};
1638			ts_cal1: calib@5c {
1639				reg = <0x5c 0x2>;
1640			};
1641			ts_cal2: calib@5e {
1642				reg = <0x5e 0x2>;
1643			};
1644		};
1645
1646		i2c6: i2c@5c009000 {
1647			compatible = "st,stm32mp15-i2c";
1648			reg = <0x5c009000 0x400>;
1649			interrupt-names = "event", "error";
1650			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
1651				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
1652			clocks = <&rcc I2C6_K>;
1653			resets = <&rcc I2C6_R>;
1654			#address-cells = <1>;
1655			#size-cells = <0>;
1656			st,syscfg-fmp = <&syscfg 0x4 0x20>;
1657			wakeup-source;
1658			i2c-analog-filter;
1659			status = "disabled";
1660		};
1661
1662		tamp: tamp@5c00a000 {
1663			compatible = "st,stm32-tamp", "syscon", "simple-mfd";
1664			reg = <0x5c00a000 0x400>;
1665		};
1666
1667		/*
1668		 * Break node order to solve dependency probe issue between
1669		 * pinctrl and exti.
1670		 */
1671		pinctrl: pinctrl@50002000 {
1672			#address-cells = <1>;
1673			#size-cells = <1>;
1674			compatible = "st,stm32mp157-pinctrl";
1675			ranges = <0 0x50002000 0xa400>;
1676			interrupt-parent = <&exti>;
1677			st,syscfg = <&exti 0x60 0xff>;
1678
1679			gpioa: gpio@50002000 {
1680				gpio-controller;
1681				#gpio-cells = <2>;
1682				interrupt-controller;
1683				#interrupt-cells = <2>;
1684				reg = <0x0 0x400>;
1685				clocks = <&rcc GPIOA>;
1686				st,bank-name = "GPIOA";
1687				status = "disabled";
1688			};
1689
1690			gpiob: gpio@50003000 {
1691				gpio-controller;
1692				#gpio-cells = <2>;
1693				interrupt-controller;
1694				#interrupt-cells = <2>;
1695				reg = <0x1000 0x400>;
1696				clocks = <&rcc GPIOB>;
1697				st,bank-name = "GPIOB";
1698				status = "disabled";
1699			};
1700
1701			gpioc: gpio@50004000 {
1702				gpio-controller;
1703				#gpio-cells = <2>;
1704				interrupt-controller;
1705				#interrupt-cells = <2>;
1706				reg = <0x2000 0x400>;
1707				clocks = <&rcc GPIOC>;
1708				st,bank-name = "GPIOC";
1709				status = "disabled";
1710			};
1711
1712			gpiod: gpio@50005000 {
1713				gpio-controller;
1714				#gpio-cells = <2>;
1715				interrupt-controller;
1716				#interrupt-cells = <2>;
1717				reg = <0x3000 0x400>;
1718				clocks = <&rcc GPIOD>;
1719				st,bank-name = "GPIOD";
1720				status = "disabled";
1721			};
1722
1723			gpioe: gpio@50006000 {
1724				gpio-controller;
1725				#gpio-cells = <2>;
1726				interrupt-controller;
1727				#interrupt-cells = <2>;
1728				reg = <0x4000 0x400>;
1729				clocks = <&rcc GPIOE>;
1730				st,bank-name = "GPIOE";
1731				status = "disabled";
1732			};
1733
1734			gpiof: gpio@50007000 {
1735				gpio-controller;
1736				#gpio-cells = <2>;
1737				interrupt-controller;
1738				#interrupt-cells = <2>;
1739				reg = <0x5000 0x400>;
1740				clocks = <&rcc GPIOF>;
1741				st,bank-name = "GPIOF";
1742				status = "disabled";
1743			};
1744
1745			gpiog: gpio@50008000 {
1746				gpio-controller;
1747				#gpio-cells = <2>;
1748				interrupt-controller;
1749				#interrupt-cells = <2>;
1750				reg = <0x6000 0x400>;
1751				clocks = <&rcc GPIOG>;
1752				st,bank-name = "GPIOG";
1753				status = "disabled";
1754			};
1755
1756			gpioh: gpio@50009000 {
1757				gpio-controller;
1758				#gpio-cells = <2>;
1759				interrupt-controller;
1760				#interrupt-cells = <2>;
1761				reg = <0x7000 0x400>;
1762				clocks = <&rcc GPIOH>;
1763				st,bank-name = "GPIOH";
1764				status = "disabled";
1765			};
1766
1767			gpioi: gpio@5000a000 {
1768				gpio-controller;
1769				#gpio-cells = <2>;
1770				interrupt-controller;
1771				#interrupt-cells = <2>;
1772				reg = <0x8000 0x400>;
1773				clocks = <&rcc GPIOI>;
1774				st,bank-name = "GPIOI";
1775				status = "disabled";
1776			};
1777
1778			gpioj: gpio@5000b000 {
1779				gpio-controller;
1780				#gpio-cells = <2>;
1781				interrupt-controller;
1782				#interrupt-cells = <2>;
1783				reg = <0x9000 0x400>;
1784				clocks = <&rcc GPIOJ>;
1785				st,bank-name = "GPIOJ";
1786				status = "disabled";
1787			};
1788
1789			gpiok: gpio@5000c000 {
1790				gpio-controller;
1791				#gpio-cells = <2>;
1792				interrupt-controller;
1793				#interrupt-cells = <2>;
1794				reg = <0xa000 0x400>;
1795				clocks = <&rcc GPIOK>;
1796				st,bank-name = "GPIOK";
1797				status = "disabled";
1798			};
1799		};
1800
1801		pinctrl_z: pinctrl@54004000 {
1802			#address-cells = <1>;
1803			#size-cells = <1>;
1804			compatible = "st,stm32mp157-z-pinctrl";
1805			ranges = <0 0x54004000 0x400>;
1806			interrupt-parent = <&exti>;
1807			st,syscfg = <&exti 0x60 0xff>;
1808
1809			gpioz: gpio@54004000 {
1810				gpio-controller;
1811				#gpio-cells = <2>;
1812				interrupt-controller;
1813				#interrupt-cells = <2>;
1814				reg = <0 0x400>;
1815				clocks = <&rcc GPIOZ>;
1816				st,bank-name = "GPIOZ";
1817				st,bank-ioport = <11>;
1818				status = "disabled";
1819			};
1820		};
1821	};
1822
1823	mlahb: ahb {
1824		compatible = "st,mlahb", "simple-bus";
1825		#address-cells = <1>;
1826		#size-cells = <1>;
1827		ranges;
1828		dma-ranges = <0x00000000 0x38000000 0x10000>,
1829			     <0x10000000 0x10000000 0x60000>,
1830			     <0x30000000 0x30000000 0x60000>;
1831
1832		m4_rproc: m4@10000000 {
1833			compatible = "st,stm32mp1-m4";
1834			reg = <0x10000000 0x40000>,
1835			      <0x30000000 0x40000>,
1836			      <0x38000000 0x10000>;
1837			resets = <&rcc MCU_R>;
1838			reset-names = "mcu_rst";
1839			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
1840			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
1841			st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
1842			st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
1843			status = "disabled";
1844		};
1845	};
1846};
1847