xref: /openbmc/linux/arch/arm/boot/dts/st/spear3xx.dtsi (revision d35ac6ac)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DTS file for all SPEAr3xx SoCs
4 *
5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
6 */
7
8/ {
9	#address-cells = <1>;
10	#size-cells = <1>;
11	interrupt-parent = <&vic>;
12
13	cpus {
14		#address-cells = <0>;
15		#size-cells = <0>;
16
17		cpu {
18			compatible = "arm,arm926ej-s";
19			device_type = "cpu";
20		};
21	};
22
23	memory {
24		device_type = "memory";
25		reg = <0 0x40000000>;
26	};
27
28	ahb {
29		#address-cells = <1>;
30		#size-cells = <1>;
31		compatible = "simple-bus";
32		ranges = <0xd0000000 0xd0000000 0x30000000>;
33
34		vic: interrupt-controller@f1100000 {
35			compatible = "arm,pl190-vic";
36			interrupt-controller;
37			reg = <0xf1100000 0x1000>;
38			#interrupt-cells = <1>;
39		};
40
41		dma@fc400000 {
42			compatible = "arm,pl080", "arm,primecell";
43			reg = <0xfc400000 0x1000>;
44			interrupt-parent = <&vic>;
45			interrupts = <8>;
46			status = "disabled";
47		};
48
49		gmac: eth@e0800000 {
50			compatible = "snps,dwmac-3.40a";
51			reg = <0xe0800000 0x8000>;
52			interrupts = <23 22>;
53			interrupt-names = "macirq", "eth_wake_irq";
54			phy-mode = "mii";
55			status = "disabled";
56		};
57
58		smi: flash@fc000000 {
59			compatible = "st,spear600-smi";
60			#address-cells = <1>;
61			#size-cells = <1>;
62			reg = <0xfc000000 0x1000>;
63			interrupts = <9>;
64			status = "disabled";
65		};
66
67		spi0: spi@d0100000 {
68			compatible = "arm,pl022", "arm,primecell";
69			reg = <0xd0100000 0x1000>;
70			interrupts = <20>;
71			#address-cells = <1>;
72			#size-cells = <0>;
73			status = "disabled";
74		};
75
76		ehci@e1800000 {
77			compatible = "st,spear600-ehci", "usb-ehci";
78			reg = <0xe1800000 0x1000>;
79			interrupts = <26>;
80			status = "disabled";
81		};
82
83		ohci@e1900000 {
84			compatible = "st,spear600-ohci", "usb-ohci";
85			reg = <0xe1900000 0x1000>;
86			interrupts = <25>;
87			status = "disabled";
88		};
89
90		ohci@e2100000 {
91			compatible = "st,spear600-ohci", "usb-ohci";
92			reg = <0xe2100000 0x1000>;
93			interrupts = <27>;
94			status = "disabled";
95		};
96
97		apb {
98			#address-cells = <1>;
99			#size-cells = <1>;
100			compatible = "simple-bus";
101			ranges = <0xd0000000 0xd0000000 0x30000000>;
102
103			gpio0: gpio@fc980000 {
104				compatible = "arm,pl061", "arm,primecell";
105				reg = <0xfc980000 0x1000>;
106				interrupts = <11>;
107				gpio-controller;
108				#gpio-cells = <2>;
109				interrupt-controller;
110				#interrupt-cells = <2>;
111				status = "disabled";
112			};
113
114			i2c0: i2c@d0180000 {
115				#address-cells = <1>;
116				#size-cells = <0>;
117				compatible = "snps,designware-i2c";
118				reg = <0xd0180000 0x1000>;
119				interrupts = <21>;
120				status = "disabled";
121			};
122
123			rtc@fc900000 {
124				compatible = "st,spear600-rtc";
125				reg = <0xfc900000 0x1000>;
126				interrupts = <10>;
127				status = "disabled";
128			};
129
130			serial@d0000000 {
131				compatible = "arm,pl011", "arm,primecell";
132				reg = <0xd0000000 0x1000>;
133				interrupts = <19>;
134				status = "disabled";
135			};
136
137			wdt@fc880000 {
138				compatible = "arm,sp805", "arm,primecell";
139				reg = <0xfc880000 0x1000>;
140				interrupts = <12>;
141				status = "disabled";
142			};
143
144			timer@f0000000 {
145				compatible = "st,spear-timer";
146				reg = <0xf0000000 0x400>;
147				interrupts = <2>;
148			};
149		};
150	};
151};
152