1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7791.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Koelsch";
45	compatible = "renesas,koelsch", "renesas,r8a7791";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scif1;
50		i2c9 = &gpioi2c1;
51		i2c10 = &gpioi2c2;
52		i2c11 = &gpioi2c4;
53		i2c12 = &i2cexio1;
54		i2c13 = &i2chdmi;
55		i2c14 = &i2cexio4;
56		mmc0 = &sdhi0;
57		mmc1 = &sdhi1;
58		mmc2 = &sdhi2;
59	};
60
61	chosen {
62		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
63		stdout-path = "serial0:115200n8";
64	};
65
66	memory@40000000 {
67		device_type = "memory";
68		reg = <0 0x40000000 0 0x40000000>;
69	};
70
71	memory@200000000 {
72		device_type = "memory";
73		reg = <2 0x00000000 0 0x40000000>;
74	};
75
76	lbsc {
77		#address-cells = <1>;
78		#size-cells = <1>;
79	};
80
81	keyboard {
82		compatible = "gpio-keys";
83
84		pinctrl-0 = <&keyboard_pins>;
85		pinctrl-names = "default";
86
87		key-1 {
88			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
89			linux,code = <KEY_1>;
90			label = "SW2-1";
91			wakeup-source;
92			debounce-interval = <20>;
93		};
94		key-2 {
95			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
96			linux,code = <KEY_2>;
97			label = "SW2-2";
98			wakeup-source;
99			debounce-interval = <20>;
100		};
101		key-3 {
102			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
103			linux,code = <KEY_3>;
104			label = "SW2-3";
105			wakeup-source;
106			debounce-interval = <20>;
107		};
108		key-4 {
109			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
110			linux,code = <KEY_4>;
111			label = "SW2-4";
112			wakeup-source;
113			debounce-interval = <20>;
114		};
115		key-a {
116			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
117			linux,code = <KEY_A>;
118			label = "SW30";
119			wakeup-source;
120			debounce-interval = <20>;
121		};
122		key-b {
123			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
124			linux,code = <KEY_B>;
125			label = "SW31";
126			wakeup-source;
127			debounce-interval = <20>;
128		};
129		key-c {
130			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
131			linux,code = <KEY_C>;
132			label = "SW32";
133			wakeup-source;
134			debounce-interval = <20>;
135		};
136		key-d {
137			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
138			linux,code = <KEY_D>;
139			label = "SW33";
140			wakeup-source;
141			debounce-interval = <20>;
142		};
143		key-e {
144			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
145			linux,code = <KEY_E>;
146			label = "SW34";
147			wakeup-source;
148			debounce-interval = <20>;
149		};
150		key-f {
151			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
152			linux,code = <KEY_F>;
153			label = "SW35";
154			wakeup-source;
155			debounce-interval = <20>;
156		};
157		key-g {
158			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
159			linux,code = <KEY_G>;
160			label = "SW36";
161			wakeup-source;
162			debounce-interval = <20>;
163		};
164	};
165
166	leds {
167		compatible = "gpio-leds";
168		led6 {
169			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
170			label = "LED6";
171		};
172		led7 {
173			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
174			label = "LED7";
175		};
176		led8 {
177			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
178			label = "LED8";
179		};
180	};
181
182	vcc_sdhi0: regulator-vcc-sdhi0 {
183		compatible = "regulator-fixed";
184
185		regulator-name = "SDHI0 Vcc";
186		regulator-min-microvolt = <3300000>;
187		regulator-max-microvolt = <3300000>;
188
189		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
190		enable-active-high;
191	};
192
193	vccq_sdhi0: regulator-vccq-sdhi0 {
194		compatible = "regulator-gpio";
195
196		regulator-name = "SDHI0 VccQ";
197		regulator-min-microvolt = <1800000>;
198		regulator-max-microvolt = <3300000>;
199
200		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
201		gpios-states = <1>;
202		states = <3300000 1>, <1800000 0>;
203	};
204
205	vcc_sdhi1: regulator-vcc-sdhi1 {
206		compatible = "regulator-fixed";
207
208		regulator-name = "SDHI1 Vcc";
209		regulator-min-microvolt = <3300000>;
210		regulator-max-microvolt = <3300000>;
211
212		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
213		enable-active-high;
214	};
215
216	vccq_sdhi1: regulator-vccq-sdhi1 {
217		compatible = "regulator-gpio";
218
219		regulator-name = "SDHI1 VccQ";
220		regulator-min-microvolt = <1800000>;
221		regulator-max-microvolt = <3300000>;
222
223		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
224		gpios-states = <1>;
225		states = <3300000 1>, <1800000 0>;
226	};
227
228	vcc_sdhi2: regulator-vcc-sdhi2 {
229		compatible = "regulator-fixed";
230
231		regulator-name = "SDHI2 Vcc";
232		regulator-min-microvolt = <3300000>;
233		regulator-max-microvolt = <3300000>;
234
235		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
236		enable-active-high;
237	};
238
239	vccq_sdhi2: regulator-vccq-sdhi2 {
240		compatible = "regulator-gpio";
241
242		regulator-name = "SDHI2 VccQ";
243		regulator-min-microvolt = <1800000>;
244		regulator-max-microvolt = <3300000>;
245
246		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
247		gpios-states = <1>;
248		states = <3300000 1>, <1800000 0>;
249	};
250
251	audio_clock: audio_clock {
252		compatible = "fixed-clock";
253		#clock-cells = <0>;
254		clock-frequency = <11289600>;
255	};
256
257	rsnd_ak4643: sound {
258		compatible = "simple-audio-card";
259
260		simple-audio-card,format = "left_j";
261		simple-audio-card,bitclock-master = <&sndcodec>;
262		simple-audio-card,frame-master = <&sndcodec>;
263
264		sndcpu: simple-audio-card,cpu {
265			sound-dai = <&rcar_sound>;
266		};
267
268		sndcodec: simple-audio-card,codec {
269			sound-dai = <&ak4643>;
270			clocks = <&audio_clock>;
271		};
272	};
273
274	hdmi-in {
275		compatible = "hdmi-connector";
276		type = "a";
277
278		port {
279			hdmi_con_in: endpoint {
280				remote-endpoint = <&adv7612_in>;
281			};
282		};
283	};
284
285	cec_clock: cec-clock {
286		compatible = "fixed-clock";
287		#clock-cells = <0>;
288		clock-frequency = <12000000>;
289	};
290
291	hdmi-out {
292		compatible = "hdmi-connector";
293		type = "a";
294
295		port {
296			hdmi_con_out: endpoint {
297				remote-endpoint = <&adv7511_out>;
298			};
299		};
300	};
301
302	x2_clk: x2-clock {
303		compatible = "fixed-clock";
304		#clock-cells = <0>;
305		clock-frequency = <74250000>;
306	};
307
308	x13_clk: x13-clock {
309		compatible = "fixed-clock";
310		#clock-cells = <0>;
311		clock-frequency = <148500000>;
312	};
313
314	gpioi2c1: i2c-9 {
315		#address-cells = <1>;
316		#size-cells = <0>;
317		compatible = "i2c-gpio";
318		status = "disabled";
319		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321		i2c-gpio,delay-us = <5>;
322	};
323
324	gpioi2c2: i2c-10 {
325		#address-cells = <1>;
326		#size-cells = <0>;
327		compatible = "i2c-gpio";
328		status = "disabled";
329		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
330		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
331		i2c-gpio,delay-us = <5>;
332	};
333
334	gpioi2c4: i2c-11 {
335		#address-cells = <1>;
336		#size-cells = <0>;
337		compatible = "i2c-gpio";
338		status = "disabled";
339		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
340		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
341		i2c-gpio,delay-us = <5>;
342	};
343
344	/*
345	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
346	 * A fallback to GPIO is provided.
347	 */
348	i2cexio1: i2c-12 {
349		compatible = "i2c-demux-pinctrl";
350		i2c-parent = <&i2c1>, <&gpioi2c1>;
351		i2c-bus-name = "i2c-exio1";
352		#address-cells = <1>;
353		#size-cells = <0>;
354	};
355
356	/*
357	 * A fallback to GPIO is provided for I2C2.
358	 */
359	i2chdmi: i2c-13 {
360		compatible = "i2c-demux-pinctrl";
361		i2c-parent = <&i2c2>, <&gpioi2c2>;
362		i2c-bus-name = "i2c-hdmi";
363		#address-cells = <1>;
364		#size-cells = <0>;
365
366		ak4643: codec@12 {
367			compatible = "asahi-kasei,ak4643";
368			#sound-dai-cells = <0>;
369			reg = <0x12>;
370		};
371
372		composite-in@20 {
373			compatible = "adi,adv7180";
374			reg = <0x20>;
375
376			port {
377				adv7180: endpoint {
378					bus-width = <8>;
379					remote-endpoint = <&vin1ep>;
380				};
381			};
382		};
383
384		hdmi@39 {
385			compatible = "adi,adv7511w";
386			reg = <0x39>;
387			interrupt-parent = <&gpio3>;
388			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
389			clocks = <&cec_clock>;
390			clock-names = "cec";
391
392			adi,input-depth = <8>;
393			adi,input-colorspace = "rgb";
394			adi,input-clock = "1x";
395
396			ports {
397				#address-cells = <1>;
398				#size-cells = <0>;
399
400				port@0 {
401					reg = <0>;
402					adv7511_in: endpoint {
403						remote-endpoint = <&du_out_rgb>;
404					};
405				};
406
407				port@1 {
408					reg = <1>;
409					adv7511_out: endpoint {
410						remote-endpoint = <&hdmi_con_out>;
411					};
412				};
413			};
414		};
415
416		hdmi-in@4c {
417			compatible = "adi,adv7612";
418			reg = <0x4c>;
419			interrupt-parent = <&gpio4>;
420			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
421			default-input = <0>;
422
423			ports {
424				#address-cells = <1>;
425				#size-cells = <0>;
426
427				port@0 {
428					reg = <0>;
429					adv7612_in: endpoint {
430						remote-endpoint = <&hdmi_con_in>;
431					};
432				};
433
434				port@2 {
435					reg = <2>;
436					adv7612_out: endpoint {
437						remote-endpoint = <&vin0ep2>;
438					};
439				};
440			};
441		};
442
443		eeprom@50 {
444			compatible = "renesas,r1ex24002", "atmel,24c02";
445			reg = <0x50>;
446			pagesize = <16>;
447		};
448	};
449
450	/*
451	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
452	 * A fallback to GPIO is provided.
453	 */
454	i2cexio4: i2c-14 {
455		compatible = "i2c-demux-pinctrl";
456		i2c-parent = <&i2c4>, <&gpioi2c4>;
457		i2c-bus-name = "i2c-exio4";
458		#address-cells = <1>;
459		#size-cells = <0>;
460	};
461};
462
463&du {
464	pinctrl-0 = <&du_pins>;
465	pinctrl-names = "default";
466	status = "okay";
467
468	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
469		 <&x13_clk>, <&x2_clk>;
470	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
471
472	ports {
473		port@0 {
474			endpoint {
475				remote-endpoint = <&adv7511_in>;
476			};
477		};
478	};
479};
480
481&lvds0 {
482	ports {
483		port@1 {
484			lvds_connector: endpoint {
485			};
486		};
487	};
488};
489
490&extal_clk {
491	clock-frequency = <20000000>;
492};
493
494&pfc {
495	pinctrl-0 = <&scif_clk_pins>;
496	pinctrl-names = "default";
497
498	i2c1_pins: i2c1 {
499		groups = "i2c1";
500		function = "i2c1";
501	};
502
503	i2c2_pins: i2c2 {
504		groups = "i2c2";
505		function = "i2c2";
506	};
507
508	i2c4_pins: i2c4 {
509		groups = "i2c4_c";
510		function = "i2c4";
511	};
512
513	du_pins: du {
514		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
515		function = "du";
516	};
517
518	scif0_pins: scif0 {
519		groups = "scif0_data_d";
520		function = "scif0";
521	};
522
523	scif1_pins: scif1 {
524		groups = "scif1_data_d";
525		function = "scif1";
526	};
527
528	scif_clk_pins: scif_clk {
529		groups = "scif_clk";
530		function = "scif_clk";
531	};
532
533	ether_pins: ether {
534		groups = "eth_link", "eth_mdio", "eth_rmii";
535		function = "eth";
536	};
537
538	phy1_pins: phy1 {
539		groups = "intc_irq0";
540		function = "intc";
541	};
542
543	pmic_irq_pins: pmicirq {
544		groups = "intc_irq2";
545		function = "intc";
546	};
547
548	sdhi0_pins: sd0 {
549		groups = "sdhi0_data4", "sdhi0_ctrl";
550		function = "sdhi0";
551		power-source = <3300>;
552	};
553
554	sdhi0_pins_uhs: sd0_uhs {
555		groups = "sdhi0_data4", "sdhi0_ctrl";
556		function = "sdhi0";
557		power-source = <1800>;
558	};
559
560	sdhi1_pins: sd1 {
561		groups = "sdhi1_data4", "sdhi1_ctrl";
562		function = "sdhi1";
563		power-source = <3300>;
564	};
565
566	sdhi1_pins_uhs: sd1_uhs {
567		groups = "sdhi1_data4", "sdhi1_ctrl";
568		function = "sdhi1";
569		power-source = <1800>;
570	};
571
572	sdhi2_pins: sd2 {
573		groups = "sdhi2_data4", "sdhi2_ctrl";
574		function = "sdhi2";
575		power-source = <3300>;
576	};
577
578	sdhi2_pins_uhs: sd2_uhs {
579		groups = "sdhi2_data4", "sdhi2_ctrl";
580		function = "sdhi2";
581		power-source = <1800>;
582	};
583
584	qspi_pins: qspi {
585		groups = "qspi_ctrl", "qspi_data4";
586		function = "qspi";
587	};
588
589	msiof0_pins: msiof0 {
590		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
591				 "msiof0_tx";
592		function = "msiof0";
593	};
594
595	usb0_pins: usb0 {
596		groups = "usb0";
597		function = "usb0";
598	};
599
600	usb1_pins: usb1 {
601		groups = "usb1";
602		function = "usb1";
603	};
604
605	vin0_pins: vin0 {
606		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
607		function = "vin0";
608	};
609
610	vin1_pins: vin1 {
611		groups = "vin1_data8", "vin1_clk";
612		function = "vin1";
613	};
614
615	sound_pins: sound {
616		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
617		function = "ssi";
618	};
619
620	sound_clk_pins: sound_clk {
621		groups = "audio_clk_a";
622		function = "audio_clk";
623	};
624
625	keyboard_pins: keyboard {
626		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
627		bias-pull-up;
628	};
629};
630
631&ether {
632	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
633	pinctrl-names = "default";
634
635	phy-handle = <&phy1>;
636	renesas,ether-link-active-low;
637	status = "okay";
638
639	phy1: ethernet-phy@1 {
640		compatible = "ethernet-phy-id0022.1537",
641			     "ethernet-phy-ieee802.3-c22";
642		reg = <1>;
643		interrupt-parent = <&irqc0>;
644		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
645		micrel,led-mode = <1>;
646		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
647	};
648};
649
650&cmt0 {
651	status = "okay";
652};
653
654&rwdt {
655	timeout-sec = <60>;
656	status = "okay";
657};
658
659&sata0 {
660	status = "okay";
661};
662
663&scif0 {
664	pinctrl-0 = <&scif0_pins>;
665	pinctrl-names = "default";
666
667	status = "okay";
668};
669
670&scif1 {
671	pinctrl-0 = <&scif1_pins>;
672	pinctrl-names = "default";
673
674	status = "okay";
675};
676
677&scif_clk {
678	clock-frequency = <14745600>;
679};
680
681&sdhi0 {
682	pinctrl-0 = <&sdhi0_pins>;
683	pinctrl-1 = <&sdhi0_pins_uhs>;
684	pinctrl-names = "default", "state_uhs";
685
686	vmmc-supply = <&vcc_sdhi0>;
687	vqmmc-supply = <&vccq_sdhi0>;
688	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
689	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
690	sd-uhs-sdr50;
691	sd-uhs-sdr104;
692	status = "okay";
693};
694
695&sdhi1 {
696	pinctrl-0 = <&sdhi1_pins>;
697	pinctrl-1 = <&sdhi1_pins_uhs>;
698	pinctrl-names = "default", "state_uhs";
699
700	vmmc-supply = <&vcc_sdhi1>;
701	vqmmc-supply = <&vccq_sdhi1>;
702	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
703	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
704	sd-uhs-sdr50;
705	status = "okay";
706};
707
708&sdhi2 {
709	pinctrl-0 = <&sdhi2_pins>;
710	pinctrl-1 = <&sdhi2_pins_uhs>;
711	pinctrl-names = "default", "state_uhs";
712
713	vmmc-supply = <&vcc_sdhi2>;
714	vqmmc-supply = <&vccq_sdhi2>;
715	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
716	sd-uhs-sdr50;
717	status = "okay";
718};
719
720&qspi {
721	pinctrl-0 = <&qspi_pins>;
722	pinctrl-names = "default";
723
724	status = "okay";
725
726	flash: flash@0 {
727		compatible = "spansion,s25fl512s", "jedec,spi-nor";
728		reg = <0>;
729		spi-max-frequency = <30000000>;
730		spi-tx-bus-width = <4>;
731		spi-rx-bus-width = <4>;
732		spi-cpha;
733		spi-cpol;
734		m25p,fast-read;
735
736		partitions {
737			compatible = "fixed-partitions";
738			#address-cells = <1>;
739			#size-cells = <1>;
740
741			partition@0 {
742				label = "loader";
743				reg = <0x00000000 0x00080000>;
744				read-only;
745			};
746			partition@80000 {
747				label = "user";
748				reg = <0x00080000 0x00580000>;
749				read-only;
750			};
751			partition@600000 {
752				label = "flash";
753				reg = <0x00600000 0x03a00000>;
754			};
755		};
756	};
757};
758
759&msiof0 {
760	pinctrl-0 = <&msiof0_pins>;
761	pinctrl-names = "default";
762
763	status = "okay";
764
765	pmic: pmic@0 {
766		compatible = "renesas,r2a11302ft";
767		reg = <0>;
768		spi-max-frequency = <6000000>;
769		spi-cpol;
770		spi-cpha;
771	};
772};
773
774&i2c1 {
775	pinctrl-0 = <&i2c1_pins>;
776	pinctrl-names = "i2c-exio1";
777};
778
779&i2c2 {
780	pinctrl-0 = <&i2c2_pins>;
781	pinctrl-names = "i2c-hdmi";
782
783	clock-frequency = <100000>;
784};
785
786&i2c4 {
787	pinctrl-0 = <&i2c4_pins>;
788	pinctrl-names = "i2c-exio4";
789};
790
791&i2c6 {
792	pinctrl-names = "default";
793	pinctrl-0 = <&pmic_irq_pins>;
794	status = "okay";
795	clock-frequency = <100000>;
796
797	pmic@58 {
798		compatible = "dlg,da9063";
799		reg = <0x58>;
800		interrupt-parent = <&irqc0>;
801		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
802		interrupt-controller;
803
804		rtc {
805			compatible = "dlg,da9063-rtc";
806		};
807
808		watchdog {
809			compatible = "dlg,da9063-watchdog";
810		};
811	};
812
813	vdd_dvfs: regulator@68 {
814		compatible = "dlg,da9210";
815		reg = <0x68>;
816		interrupt-parent = <&irqc0>;
817		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
818
819		regulator-min-microvolt = <1000000>;
820		regulator-max-microvolt = <1000000>;
821		regulator-boot-on;
822		regulator-always-on;
823	};
824};
825
826&pci0 {
827	status = "okay";
828	pinctrl-0 = <&usb0_pins>;
829	pinctrl-names = "default";
830};
831
832&pci1 {
833	status = "okay";
834	pinctrl-0 = <&usb1_pins>;
835	pinctrl-names = "default";
836};
837
838&hsusb {
839	status = "okay";
840	pinctrl-0 = <&usb0_pins>;
841	pinctrl-names = "default";
842	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
843};
844
845&usbphy {
846	status = "okay";
847};
848
849&pcie_bus_clk {
850	clock-frequency = <100000000>;
851};
852
853&pciec {
854	status = "okay";
855};
856
857&cpu0 {
858	cpu0-supply = <&vdd_dvfs>;
859};
860
861/* HDMI video input */
862&vin0 {
863	status = "okay";
864	pinctrl-0 = <&vin0_pins>;
865	pinctrl-names = "default";
866
867	port {
868		vin0ep2: endpoint {
869			remote-endpoint = <&adv7612_out>;
870			bus-width = <24>;
871			hsync-active = <0>;
872			vsync-active = <0>;
873			pclk-sample = <1>;
874			data-active = <1>;
875		};
876	};
877};
878
879/* composite video input */
880&vin1 {
881	status = "okay";
882	pinctrl-0 = <&vin1_pins>;
883	pinctrl-names = "default";
884
885	port {
886		vin1ep: endpoint {
887			remote-endpoint = <&adv7180>;
888			bus-width = <8>;
889		};
890	};
891};
892
893&rcar_sound {
894	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
895	pinctrl-names = "default";
896
897	/* Single DAI */
898	#sound-dai-cells = <0>;
899
900	status = "okay";
901
902	rcar_sound,dai {
903		dai0 {
904			playback = <&ssi0>, <&src2>, <&dvc0>;
905			capture  = <&ssi1>, <&src3>, <&dvc1>;
906		};
907	};
908};
909
910&ssi1 {
911	shared-pin;
912};
913