1// SPDX-License-Identifier: GPL-2.0 2/dts-v1/; 3 4#include <dt-bindings/interconnect/qcom,msm8974.h> 5#include <dt-bindings/interrupt-controller/arm-gic.h> 6#include <dt-bindings/clock/qcom,gcc-msm8974.h> 7#include <dt-bindings/clock/qcom,mmcc-msm8974.h> 8#include <dt-bindings/clock/qcom,rpmcc.h> 9#include <dt-bindings/reset/qcom,gcc-msm8974.h> 10#include <dt-bindings/gpio/gpio.h> 11 12/ { 13 #address-cells = <1>; 14 #size-cells = <1>; 15 interrupt-parent = <&intc>; 16 17 clocks { 18 xo_board: xo_board { 19 compatible = "fixed-clock"; 20 #clock-cells = <0>; 21 clock-frequency = <19200000>; 22 }; 23 24 sleep_clk: sleep_clk { 25 compatible = "fixed-clock"; 26 #clock-cells = <0>; 27 clock-frequency = <32768>; 28 }; 29 }; 30 31 cpus { 32 #address-cells = <1>; 33 #size-cells = <0>; 34 interrupts = <GIC_PPI 9 0xf04>; 35 36 CPU0: cpu@0 { 37 compatible = "qcom,krait"; 38 enable-method = "qcom,kpss-acc-v2"; 39 device_type = "cpu"; 40 reg = <0>; 41 next-level-cache = <&L2>; 42 qcom,acc = <&acc0>; 43 qcom,saw = <&saw0>; 44 cpu-idle-states = <&CPU_SPC>; 45 }; 46 47 CPU1: cpu@1 { 48 compatible = "qcom,krait"; 49 enable-method = "qcom,kpss-acc-v2"; 50 device_type = "cpu"; 51 reg = <1>; 52 next-level-cache = <&L2>; 53 qcom,acc = <&acc1>; 54 qcom,saw = <&saw1>; 55 cpu-idle-states = <&CPU_SPC>; 56 }; 57 58 CPU2: cpu@2 { 59 compatible = "qcom,krait"; 60 enable-method = "qcom,kpss-acc-v2"; 61 device_type = "cpu"; 62 reg = <2>; 63 next-level-cache = <&L2>; 64 qcom,acc = <&acc2>; 65 qcom,saw = <&saw2>; 66 cpu-idle-states = <&CPU_SPC>; 67 }; 68 69 CPU3: cpu@3 { 70 compatible = "qcom,krait"; 71 enable-method = "qcom,kpss-acc-v2"; 72 device_type = "cpu"; 73 reg = <3>; 74 next-level-cache = <&L2>; 75 qcom,acc = <&acc3>; 76 qcom,saw = <&saw3>; 77 cpu-idle-states = <&CPU_SPC>; 78 }; 79 80 L2: l2-cache { 81 compatible = "cache"; 82 cache-level = <2>; 83 cache-unified; 84 qcom,saw = <&saw_l2>; 85 }; 86 87 idle-states { 88 CPU_SPC: spc { 89 compatible = "qcom,idle-state-spc", 90 "arm,idle-state"; 91 entry-latency-us = <150>; 92 exit-latency-us = <200>; 93 min-residency-us = <2000>; 94 }; 95 }; 96 }; 97 98 firmware { 99 scm { 100 compatible = "qcom,scm-msm8974", "qcom,scm"; 101 clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; 102 clock-names = "core", "bus", "iface"; 103 }; 104 }; 105 106 memory { 107 device_type = "memory"; 108 reg = <0x0 0x0>; 109 }; 110 111 pmu { 112 compatible = "qcom,krait-pmu"; 113 interrupts = <GIC_PPI 7 0xf04>; 114 }; 115 116 reserved-memory { 117 #address-cells = <1>; 118 #size-cells = <1>; 119 ranges; 120 121 mpss_region: mpss@8000000 { 122 reg = <0x08000000 0x5100000>; 123 no-map; 124 }; 125 126 mba_region: mba@d100000 { 127 reg = <0x0d100000 0x100000>; 128 no-map; 129 }; 130 131 wcnss_region: wcnss@d200000 { 132 reg = <0x0d200000 0xa00000>; 133 no-map; 134 }; 135 136 adsp_region: adsp@dc00000 { 137 reg = <0x0dc00000 0x1900000>; 138 no-map; 139 }; 140 141 venus_region: memory@f500000 { 142 reg = <0x0f500000 0x500000>; 143 no-map; 144 }; 145 146 smem_region: smem@fa00000 { 147 reg = <0xfa00000 0x200000>; 148 no-map; 149 }; 150 151 tz_region: memory@fc00000 { 152 reg = <0x0fc00000 0x160000>; 153 no-map; 154 }; 155 156 rfsa_mem: memory@fd60000 { 157 reg = <0x0fd60000 0x20000>; 158 no-map; 159 }; 160 161 rmtfs@fd80000 { 162 compatible = "qcom,rmtfs-mem"; 163 reg = <0x0fd80000 0x180000>; 164 no-map; 165 166 qcom,client-id = <1>; 167 }; 168 }; 169 170 smem { 171 compatible = "qcom,smem"; 172 173 memory-region = <&smem_region>; 174 qcom,rpm-msg-ram = <&rpm_msg_ram>; 175 176 hwlocks = <&tcsr_mutex 3>; 177 }; 178 179 smp2p-adsp { 180 compatible = "qcom,smp2p"; 181 qcom,smem = <443>, <429>; 182 183 interrupt-parent = <&intc>; 184 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; 185 186 qcom,ipc = <&apcs 8 10>; 187 188 qcom,local-pid = <0>; 189 qcom,remote-pid = <2>; 190 191 adsp_smp2p_out: master-kernel { 192 qcom,entry-name = "master-kernel"; 193 #qcom,smem-state-cells = <1>; 194 }; 195 196 adsp_smp2p_in: slave-kernel { 197 qcom,entry-name = "slave-kernel"; 198 199 interrupt-controller; 200 #interrupt-cells = <2>; 201 }; 202 }; 203 204 smp2p-modem { 205 compatible = "qcom,smp2p"; 206 qcom,smem = <435>, <428>; 207 208 interrupt-parent = <&intc>; 209 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; 210 211 qcom,ipc = <&apcs 8 14>; 212 213 qcom,local-pid = <0>; 214 qcom,remote-pid = <1>; 215 216 modem_smp2p_out: master-kernel { 217 qcom,entry-name = "master-kernel"; 218 #qcom,smem-state-cells = <1>; 219 }; 220 221 modem_smp2p_in: slave-kernel { 222 qcom,entry-name = "slave-kernel"; 223 224 interrupt-controller; 225 #interrupt-cells = <2>; 226 }; 227 }; 228 229 smp2p-wcnss { 230 compatible = "qcom,smp2p"; 231 qcom,smem = <451>, <431>; 232 233 interrupt-parent = <&intc>; 234 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; 235 236 qcom,ipc = <&apcs 8 18>; 237 238 qcom,local-pid = <0>; 239 qcom,remote-pid = <4>; 240 241 wcnss_smp2p_out: master-kernel { 242 qcom,entry-name = "master-kernel"; 243 244 #qcom,smem-state-cells = <1>; 245 }; 246 247 wcnss_smp2p_in: slave-kernel { 248 qcom,entry-name = "slave-kernel"; 249 250 interrupt-controller; 251 #interrupt-cells = <2>; 252 }; 253 }; 254 255 smsm { 256 compatible = "qcom,smsm"; 257 258 #address-cells = <1>; 259 #size-cells = <0>; 260 261 qcom,ipc-1 = <&apcs 8 13>; 262 qcom,ipc-2 = <&apcs 8 9>; 263 qcom,ipc-3 = <&apcs 8 19>; 264 265 apps_smsm: apps@0 { 266 reg = <0>; 267 268 #qcom,smem-state-cells = <1>; 269 }; 270 271 modem_smsm: modem@1 { 272 reg = <1>; 273 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 274 275 interrupt-controller; 276 #interrupt-cells = <2>; 277 }; 278 279 adsp_smsm: adsp@2 { 280 reg = <2>; 281 interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; 282 283 interrupt-controller; 284 #interrupt-cells = <2>; 285 }; 286 287 wcnss_smsm: wcnss@7 { 288 reg = <7>; 289 interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; 290 291 interrupt-controller; 292 #interrupt-cells = <2>; 293 }; 294 }; 295 296 smd { 297 compatible = "qcom,smd"; 298 299 rpm { 300 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; 301 qcom,ipc = <&apcs 8 0>; 302 qcom,smd-edge = <15>; 303 304 rpm_requests: rpm-requests { 305 compatible = "qcom,rpm-msm8974"; 306 qcom,smd-channels = "rpm_requests"; 307 308 rpmcc: clock-controller { 309 compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; 310 #clock-cells = <1>; 311 clocks = <&xo_board>; 312 clock-names = "xo"; 313 }; 314 }; 315 }; 316 }; 317 318 soc: soc { 319 #address-cells = <1>; 320 #size-cells = <1>; 321 ranges; 322 compatible = "simple-bus"; 323 324 intc: interrupt-controller@f9000000 { 325 compatible = "qcom,msm-qgic2"; 326 interrupt-controller; 327 #interrupt-cells = <3>; 328 reg = <0xf9000000 0x1000>, 329 <0xf9002000 0x1000>; 330 }; 331 332 apcs: syscon@f9011000 { 333 compatible = "syscon"; 334 reg = <0xf9011000 0x1000>; 335 }; 336 337 timer@f9020000 { 338 #address-cells = <1>; 339 #size-cells = <1>; 340 ranges; 341 compatible = "arm,armv7-timer-mem"; 342 reg = <0xf9020000 0x1000>; 343 clock-frequency = <19200000>; 344 345 frame@f9021000 { 346 frame-number = <0>; 347 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 348 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 349 reg = <0xf9021000 0x1000>, 350 <0xf9022000 0x1000>; 351 }; 352 353 frame@f9023000 { 354 frame-number = <1>; 355 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 356 reg = <0xf9023000 0x1000>; 357 status = "disabled"; 358 }; 359 360 frame@f9024000 { 361 frame-number = <2>; 362 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 363 reg = <0xf9024000 0x1000>; 364 status = "disabled"; 365 }; 366 367 frame@f9025000 { 368 frame-number = <3>; 369 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 370 reg = <0xf9025000 0x1000>; 371 status = "disabled"; 372 }; 373 374 frame@f9026000 { 375 frame-number = <4>; 376 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 377 reg = <0xf9026000 0x1000>; 378 status = "disabled"; 379 }; 380 381 frame@f9027000 { 382 frame-number = <5>; 383 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 384 reg = <0xf9027000 0x1000>; 385 status = "disabled"; 386 }; 387 388 frame@f9028000 { 389 frame-number = <6>; 390 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 391 reg = <0xf9028000 0x1000>; 392 status = "disabled"; 393 }; 394 }; 395 396 saw0: power-controller@f9089000 { 397 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 398 reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; 399 }; 400 401 saw1: power-controller@f9099000 { 402 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 403 reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; 404 }; 405 406 saw2: power-controller@f90a9000 { 407 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 408 reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; 409 }; 410 411 saw3: power-controller@f90b9000 { 412 compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; 413 reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; 414 }; 415 416 saw_l2: power-controller@f9012000 { 417 compatible = "qcom,saw2"; 418 reg = <0xf9012000 0x1000>; 419 regulator; 420 }; 421 422 acc0: power-manager@f9088000 { 423 compatible = "qcom,kpss-acc-v2"; 424 reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; 425 }; 426 427 acc1: power-manager@f9098000 { 428 compatible = "qcom,kpss-acc-v2"; 429 reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; 430 }; 431 432 acc2: power-manager@f90a8000 { 433 compatible = "qcom,kpss-acc-v2"; 434 reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; 435 }; 436 437 acc3: power-manager@f90b8000 { 438 compatible = "qcom,kpss-acc-v2"; 439 reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; 440 }; 441 442 sdhc_1: mmc@f9824900 { 443 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 444 reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; 445 reg-names = "hc", "core"; 446 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 447 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 448 interrupt-names = "hc_irq", "pwr_irq"; 449 clocks = <&gcc GCC_SDCC1_AHB_CLK>, 450 <&gcc GCC_SDCC1_APPS_CLK>, 451 <&xo_board>; 452 clock-names = "iface", "core", "xo"; 453 bus-width = <8>; 454 non-removable; 455 456 status = "disabled"; 457 }; 458 459 sdhc_3: mmc@f9864900 { 460 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 461 reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; 462 reg-names = "hc", "core"; 463 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, 464 <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; 465 interrupt-names = "hc_irq", "pwr_irq"; 466 clocks = <&gcc GCC_SDCC3_AHB_CLK>, 467 <&gcc GCC_SDCC3_APPS_CLK>, 468 <&xo_board>; 469 clock-names = "iface", "core", "xo"; 470 bus-width = <4>; 471 472 #address-cells = <1>; 473 #size-cells = <0>; 474 475 status = "disabled"; 476 }; 477 478 sdhc_2: mmc@f98a4900 { 479 compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; 480 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; 481 reg-names = "hc", "core"; 482 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 483 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 484 interrupt-names = "hc_irq", "pwr_irq"; 485 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 486 <&gcc GCC_SDCC2_APPS_CLK>, 487 <&xo_board>; 488 clock-names = "iface", "core", "xo"; 489 bus-width = <4>; 490 491 #address-cells = <1>; 492 #size-cells = <0>; 493 494 status = "disabled"; 495 }; 496 497 blsp1_uart1: serial@f991d000 { 498 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 499 reg = <0xf991d000 0x1000>; 500 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 501 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 502 clock-names = "core", "iface"; 503 status = "disabled"; 504 }; 505 506 blsp1_uart2: serial@f991e000 { 507 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 508 reg = <0xf991e000 0x1000>; 509 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; 510 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 511 clock-names = "core", "iface"; 512 pinctrl-names = "default"; 513 pinctrl-0 = <&blsp1_uart2_default>; 514 status = "disabled"; 515 }; 516 517 blsp1_i2c1: i2c@f9923000 { 518 status = "disabled"; 519 compatible = "qcom,i2c-qup-v2.1.1"; 520 reg = <0xf9923000 0x1000>; 521 interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; 522 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 523 clock-names = "core", "iface"; 524 pinctrl-names = "default", "sleep"; 525 pinctrl-0 = <&blsp1_i2c1_default>; 526 pinctrl-1 = <&blsp1_i2c1_sleep>; 527 #address-cells = <1>; 528 #size-cells = <0>; 529 }; 530 531 blsp1_i2c2: i2c@f9924000 { 532 status = "disabled"; 533 compatible = "qcom,i2c-qup-v2.1.1"; 534 reg = <0xf9924000 0x1000>; 535 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 536 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 537 clock-names = "core", "iface"; 538 pinctrl-names = "default", "sleep"; 539 pinctrl-0 = <&blsp1_i2c2_default>; 540 pinctrl-1 = <&blsp1_i2c2_sleep>; 541 #address-cells = <1>; 542 #size-cells = <0>; 543 }; 544 545 blsp1_i2c3: i2c@f9925000 { 546 status = "disabled"; 547 compatible = "qcom,i2c-qup-v2.1.1"; 548 reg = <0xf9925000 0x1000>; 549 interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; 550 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 551 clock-names = "core", "iface"; 552 pinctrl-names = "default", "sleep"; 553 pinctrl-0 = <&blsp1_i2c3_default>; 554 pinctrl-1 = <&blsp1_i2c3_sleep>; 555 #address-cells = <1>; 556 #size-cells = <0>; 557 }; 558 559 blsp1_i2c6: i2c@f9928000 { 560 status = "disabled"; 561 compatible = "qcom,i2c-qup-v2.1.1"; 562 reg = <0xf9928000 0x1000>; 563 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 564 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; 565 clock-names = "core", "iface"; 566 pinctrl-names = "default", "sleep"; 567 pinctrl-0 = <&blsp1_i2c6_default>; 568 pinctrl-1 = <&blsp1_i2c6_sleep>; 569 #address-cells = <1>; 570 #size-cells = <0>; 571 }; 572 573 blsp2_dma: dma-controller@f9944000 { 574 compatible = "qcom,bam-v1.4.0"; 575 reg = <0xf9944000 0x19000>; 576 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; 577 clocks = <&gcc GCC_BLSP2_AHB_CLK>; 578 clock-names = "bam_clk"; 579 #dma-cells = <1>; 580 qcom,ee = <0>; 581 }; 582 583 blsp2_uart1: serial@f995d000 { 584 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 585 reg = <0xf995d000 0x1000>; 586 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; 587 clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 588 clock-names = "core", "iface"; 589 pinctrl-names = "default", "sleep"; 590 pinctrl-0 = <&blsp2_uart1_default>; 591 pinctrl-1 = <&blsp2_uart1_sleep>; 592 status = "disabled"; 593 }; 594 595 blsp2_uart2: serial@f995e000 { 596 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 597 reg = <0xf995e000 0x1000>; 598 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 599 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 600 clock-names = "core", "iface"; 601 status = "disabled"; 602 }; 603 604 blsp2_uart4: serial@f9960000 { 605 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 606 reg = <0xf9960000 0x1000>; 607 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; 608 clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 609 clock-names = "core", "iface"; 610 pinctrl-names = "default"; 611 pinctrl-0 = <&blsp2_uart4_default>; 612 status = "disabled"; 613 }; 614 615 blsp2_i2c2: i2c@f9964000 { 616 status = "disabled"; 617 compatible = "qcom,i2c-qup-v2.1.1"; 618 reg = <0xf9964000 0x1000>; 619 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; 620 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 621 clock-names = "core", "iface"; 622 pinctrl-names = "default", "sleep"; 623 pinctrl-0 = <&blsp2_i2c2_default>; 624 pinctrl-1 = <&blsp2_i2c2_sleep>; 625 #address-cells = <1>; 626 #size-cells = <0>; 627 }; 628 629 blsp2_i2c5: i2c@f9967000 { 630 status = "disabled"; 631 compatible = "qcom,i2c-qup-v2.1.1"; 632 reg = <0xf9967000 0x1000>; 633 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 634 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 635 clock-names = "core", "iface"; 636 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; 637 dma-names = "tx", "rx"; 638 pinctrl-names = "default", "sleep"; 639 pinctrl-0 = <&blsp2_i2c5_default>; 640 pinctrl-1 = <&blsp2_i2c5_sleep>; 641 #address-cells = <1>; 642 #size-cells = <0>; 643 }; 644 645 blsp2_i2c6: i2c@f9968000 { 646 status = "disabled"; 647 compatible = "qcom,i2c-qup-v2.1.1"; 648 reg = <0xf9968000 0x1000>; 649 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; 650 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; 651 clock-names = "core", "iface"; 652 pinctrl-names = "default", "sleep"; 653 pinctrl-0 = <&blsp2_i2c6_default>; 654 pinctrl-1 = <&blsp2_i2c6_sleep>; 655 #address-cells = <1>; 656 #size-cells = <0>; 657 }; 658 659 usb: usb@f9a55000 { 660 compatible = "qcom,ci-hdrc"; 661 reg = <0xf9a55000 0x200>, 662 <0xf9a55200 0x200>; 663 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; 664 clocks = <&gcc GCC_USB_HS_AHB_CLK>, 665 <&gcc GCC_USB_HS_SYSTEM_CLK>; 666 clock-names = "iface", "core"; 667 assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; 668 assigned-clock-rates = <75000000>; 669 resets = <&gcc GCC_USB_HS_BCR>; 670 reset-names = "core"; 671 phy_type = "ulpi"; 672 dr_mode = "otg"; 673 ahb-burst-config = <0>; 674 phy-names = "usb-phy"; 675 status = "disabled"; 676 #reset-cells = <1>; 677 678 ulpi { 679 usb_hs1_phy: phy-0 { 680 compatible = "qcom,usb-hs-phy-msm8974", 681 "qcom,usb-hs-phy"; 682 #phy-cells = <0>; 683 clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; 684 clock-names = "ref", "sleep"; 685 resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; 686 reset-names = "phy", "por"; 687 status = "disabled"; 688 }; 689 690 usb_hs2_phy: phy-1 { 691 compatible = "qcom,usb-hs-phy-msm8974", 692 "qcom,usb-hs-phy"; 693 #phy-cells = <0>; 694 clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; 695 clock-names = "ref", "sleep"; 696 resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>; 697 reset-names = "phy", "por"; 698 status = "disabled"; 699 }; 700 }; 701 }; 702 703 rng@f9bff000 { 704 compatible = "qcom,prng"; 705 reg = <0xf9bff000 0x200>; 706 clocks = <&gcc GCC_PRNG_AHB_CLK>; 707 clock-names = "core"; 708 }; 709 710 pronto: remoteproc@fb204000 { 711 compatible = "qcom,pronto-v2-pil", "qcom,pronto"; 712 reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; 713 reg-names = "ccu", "dxe", "pmu"; 714 715 memory-region = <&wcnss_region>; 716 717 interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, 718 <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 719 <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 720 <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 721 <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 722 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 723 724 qcom,smem-states = <&wcnss_smp2p_out 0>; 725 qcom,smem-state-names = "stop"; 726 727 status = "disabled"; 728 729 iris { 730 compatible = "qcom,wcn3680"; 731 732 clocks = <&rpmcc RPM_SMD_CXO_A2>; 733 clock-names = "xo"; 734 }; 735 736 smd-edge { 737 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; 738 739 qcom,ipc = <&apcs 8 17>; 740 qcom,smd-edge = <6>; 741 742 wcnss { 743 compatible = "qcom,wcnss"; 744 qcom,smd-channels = "WCNSS_CTRL"; 745 status = "disabled"; 746 747 qcom,mmio = <&pronto>; 748 749 bluetooth { 750 compatible = "qcom,wcnss-bt"; 751 }; 752 753 wifi { 754 compatible = "qcom,wcnss-wlan"; 755 756 interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, 757 <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; 758 interrupt-names = "tx", "rx"; 759 760 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; 761 qcom,smem-state-names = "tx-enable", 762 "tx-rings-empty"; 763 }; 764 }; 765 }; 766 }; 767 768 sram@fc190000 { 769 compatible = "qcom,msm8974-rpm-stats"; 770 reg = <0xfc190000 0x10000>; 771 }; 772 773 etf@fc307000 { 774 compatible = "arm,coresight-tmc", "arm,primecell"; 775 reg = <0xfc307000 0x1000>; 776 777 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 778 clock-names = "apb_pclk", "atclk"; 779 780 out-ports { 781 port { 782 etf_out: endpoint { 783 remote-endpoint = <&replicator_in>; 784 }; 785 }; 786 }; 787 788 in-ports { 789 port { 790 etf_in: endpoint { 791 remote-endpoint = <&merger_out>; 792 }; 793 }; 794 }; 795 }; 796 797 tpiu@fc318000 { 798 compatible = "arm,coresight-tpiu", "arm,primecell"; 799 reg = <0xfc318000 0x1000>; 800 801 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 802 clock-names = "apb_pclk", "atclk"; 803 804 in-ports { 805 port { 806 tpiu_in: endpoint { 807 remote-endpoint = <&replicator_out1>; 808 }; 809 }; 810 }; 811 }; 812 813 funnel@fc31a000 { 814 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 815 reg = <0xfc31a000 0x1000>; 816 817 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 818 clock-names = "apb_pclk", "atclk"; 819 820 in-ports { 821 #address-cells = <1>; 822 #size-cells = <0>; 823 824 /* 825 * Not described input ports: 826 * 0 - not-connected 827 * 1 - connected trought funnel to Multimedia CPU 828 * 2 - connected to Wireless CPU 829 * 3 - not-connected 830 * 4 - not-connected 831 * 6 - not-connected 832 * 7 - connected to STM 833 */ 834 port@5 { 835 reg = <5>; 836 funnel1_in5: endpoint { 837 remote-endpoint = <&kpss_out>; 838 }; 839 }; 840 }; 841 842 out-ports { 843 port { 844 funnel1_out: endpoint { 845 remote-endpoint = <&merger_in1>; 846 }; 847 }; 848 }; 849 }; 850 851 funnel@fc31b000 { 852 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 853 reg = <0xfc31b000 0x1000>; 854 855 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 856 clock-names = "apb_pclk", "atclk"; 857 858 in-ports { 859 #address-cells = <1>; 860 #size-cells = <0>; 861 862 /* 863 * Not described input ports: 864 * 0 - connected trought funnel to Audio, Modem and 865 * Resource and Power Manager CPU's 866 * 2...7 - not-connected 867 */ 868 port@1 { 869 reg = <1>; 870 merger_in1: endpoint { 871 remote-endpoint = <&funnel1_out>; 872 }; 873 }; 874 }; 875 876 out-ports { 877 port { 878 merger_out: endpoint { 879 remote-endpoint = <&etf_in>; 880 }; 881 }; 882 }; 883 }; 884 885 replicator@fc31c000 { 886 compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; 887 reg = <0xfc31c000 0x1000>; 888 889 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 890 clock-names = "apb_pclk", "atclk"; 891 892 out-ports { 893 #address-cells = <1>; 894 #size-cells = <0>; 895 896 port@0 { 897 reg = <0>; 898 replicator_out0: endpoint { 899 remote-endpoint = <&etr_in>; 900 }; 901 }; 902 port@1 { 903 reg = <1>; 904 replicator_out1: endpoint { 905 remote-endpoint = <&tpiu_in>; 906 }; 907 }; 908 }; 909 910 in-ports { 911 port { 912 replicator_in: endpoint { 913 remote-endpoint = <&etf_out>; 914 }; 915 }; 916 }; 917 }; 918 919 etr@fc322000 { 920 compatible = "arm,coresight-tmc", "arm,primecell"; 921 reg = <0xfc322000 0x1000>; 922 923 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 924 clock-names = "apb_pclk", "atclk"; 925 926 in-ports { 927 port { 928 etr_in: endpoint { 929 remote-endpoint = <&replicator_out0>; 930 }; 931 }; 932 }; 933 }; 934 935 etm@fc33c000 { 936 compatible = "arm,coresight-etm4x", "arm,primecell"; 937 reg = <0xfc33c000 0x1000>; 938 939 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 940 clock-names = "apb_pclk", "atclk"; 941 942 cpu = <&CPU0>; 943 944 out-ports { 945 port { 946 etm0_out: endpoint { 947 remote-endpoint = <&kpss_in0>; 948 }; 949 }; 950 }; 951 }; 952 953 etm@fc33d000 { 954 compatible = "arm,coresight-etm4x", "arm,primecell"; 955 reg = <0xfc33d000 0x1000>; 956 957 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 958 clock-names = "apb_pclk", "atclk"; 959 960 cpu = <&CPU1>; 961 962 out-ports { 963 port { 964 etm1_out: endpoint { 965 remote-endpoint = <&kpss_in1>; 966 }; 967 }; 968 }; 969 }; 970 971 etm@fc33e000 { 972 compatible = "arm,coresight-etm4x", "arm,primecell"; 973 reg = <0xfc33e000 0x1000>; 974 975 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 976 clock-names = "apb_pclk", "atclk"; 977 978 cpu = <&CPU2>; 979 980 out-ports { 981 port { 982 etm2_out: endpoint { 983 remote-endpoint = <&kpss_in2>; 984 }; 985 }; 986 }; 987 }; 988 989 etm@fc33f000 { 990 compatible = "arm,coresight-etm4x", "arm,primecell"; 991 reg = <0xfc33f000 0x1000>; 992 993 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 994 clock-names = "apb_pclk", "atclk"; 995 996 cpu = <&CPU3>; 997 998 out-ports { 999 port { 1000 etm3_out: endpoint { 1001 remote-endpoint = <&kpss_in3>; 1002 }; 1003 }; 1004 }; 1005 }; 1006 1007 /* KPSS funnel, only 4 inputs are used */ 1008 funnel@fc345000 { 1009 compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; 1010 reg = <0xfc345000 0x1000>; 1011 1012 clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; 1013 clock-names = "apb_pclk", "atclk"; 1014 1015 in-ports { 1016 #address-cells = <1>; 1017 #size-cells = <0>; 1018 1019 port@0 { 1020 reg = <0>; 1021 kpss_in0: endpoint { 1022 remote-endpoint = <&etm0_out>; 1023 }; 1024 }; 1025 port@1 { 1026 reg = <1>; 1027 kpss_in1: endpoint { 1028 remote-endpoint = <&etm1_out>; 1029 }; 1030 }; 1031 port@2 { 1032 reg = <2>; 1033 kpss_in2: endpoint { 1034 remote-endpoint = <&etm2_out>; 1035 }; 1036 }; 1037 port@3 { 1038 reg = <3>; 1039 kpss_in3: endpoint { 1040 remote-endpoint = <&etm3_out>; 1041 }; 1042 }; 1043 }; 1044 1045 out-ports { 1046 port { 1047 kpss_out: endpoint { 1048 remote-endpoint = <&funnel1_in5>; 1049 }; 1050 }; 1051 }; 1052 }; 1053 1054 gcc: clock-controller@fc400000 { 1055 compatible = "qcom,gcc-msm8974"; 1056 #clock-cells = <1>; 1057 #reset-cells = <1>; 1058 #power-domain-cells = <1>; 1059 reg = <0xfc400000 0x4000>; 1060 1061 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 1062 <&sleep_clk>; 1063 clock-names = "xo", 1064 "sleep_clk"; 1065 }; 1066 1067 rpm_msg_ram: sram@fc428000 { 1068 compatible = "qcom,rpm-msg-ram"; 1069 reg = <0xfc428000 0x4000>; 1070 }; 1071 1072 bimc: interconnect@fc380000 { 1073 reg = <0xfc380000 0x6a000>; 1074 compatible = "qcom,msm8974-bimc"; 1075 #interconnect-cells = <1>; 1076 clock-names = "bus", "bus_a"; 1077 clocks = <&rpmcc RPM_SMD_BIMC_CLK>, 1078 <&rpmcc RPM_SMD_BIMC_A_CLK>; 1079 }; 1080 1081 snoc: interconnect@fc460000 { 1082 reg = <0xfc460000 0x4000>; 1083 compatible = "qcom,msm8974-snoc"; 1084 #interconnect-cells = <1>; 1085 clock-names = "bus", "bus_a"; 1086 clocks = <&rpmcc RPM_SMD_SNOC_CLK>, 1087 <&rpmcc RPM_SMD_SNOC_A_CLK>; 1088 }; 1089 1090 pnoc: interconnect@fc468000 { 1091 reg = <0xfc468000 0x4000>; 1092 compatible = "qcom,msm8974-pnoc"; 1093 #interconnect-cells = <1>; 1094 clock-names = "bus", "bus_a"; 1095 clocks = <&rpmcc RPM_SMD_PNOC_CLK>, 1096 <&rpmcc RPM_SMD_PNOC_A_CLK>; 1097 }; 1098 1099 ocmemnoc: interconnect@fc470000 { 1100 reg = <0xfc470000 0x4000>; 1101 compatible = "qcom,msm8974-ocmemnoc"; 1102 #interconnect-cells = <1>; 1103 clock-names = "bus", "bus_a"; 1104 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, 1105 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; 1106 }; 1107 1108 mmssnoc: interconnect@fc478000 { 1109 reg = <0xfc478000 0x4000>; 1110 compatible = "qcom,msm8974-mmssnoc"; 1111 #interconnect-cells = <1>; 1112 clock-names = "bus", "bus_a"; 1113 clocks = <&mmcc MMSS_S0_AXI_CLK>, 1114 <&mmcc MMSS_S0_AXI_CLK>; 1115 }; 1116 1117 cnoc: interconnect@fc480000 { 1118 reg = <0xfc480000 0x4000>; 1119 compatible = "qcom,msm8974-cnoc"; 1120 #interconnect-cells = <1>; 1121 clock-names = "bus", "bus_a"; 1122 clocks = <&rpmcc RPM_SMD_CNOC_CLK>, 1123 <&rpmcc RPM_SMD_CNOC_A_CLK>; 1124 }; 1125 1126 tsens: thermal-sensor@fc4a9000 { 1127 compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1"; 1128 reg = <0xfc4a9000 0x1000>, /* TM */ 1129 <0xfc4a8000 0x1000>; /* SROT */ 1130 nvmem-cells = <&tsens_mode>, 1131 <&tsens_base1>, <&tsens_base2>, 1132 <&tsens_use_backup>, 1133 <&tsens_mode_backup>, 1134 <&tsens_base1_backup>, <&tsens_base2_backup>, 1135 <&tsens_s0_p1>, <&tsens_s0_p2>, 1136 <&tsens_s1_p1>, <&tsens_s1_p2>, 1137 <&tsens_s2_p1>, <&tsens_s2_p2>, 1138 <&tsens_s3_p1>, <&tsens_s3_p2>, 1139 <&tsens_s4_p1>, <&tsens_s4_p2>, 1140 <&tsens_s5_p1>, <&tsens_s5_p2>, 1141 <&tsens_s6_p1>, <&tsens_s6_p2>, 1142 <&tsens_s7_p1>, <&tsens_s7_p2>, 1143 <&tsens_s8_p1>, <&tsens_s8_p2>, 1144 <&tsens_s9_p1>, <&tsens_s9_p2>, 1145 <&tsens_s10_p1>, <&tsens_s10_p2>, 1146 <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>, 1147 <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>, 1148 <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>, 1149 <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>, 1150 <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>, 1151 <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>, 1152 <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>, 1153 <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>, 1154 <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>, 1155 <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>, 1156 <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>; 1157 nvmem-cell-names = "mode", 1158 "base1", "base2", 1159 "use_backup", 1160 "mode_backup", 1161 "base1_backup", "base2_backup", 1162 "s0_p1", "s0_p2", 1163 "s1_p1", "s1_p2", 1164 "s2_p1", "s2_p2", 1165 "s3_p1", "s3_p2", 1166 "s4_p1", "s4_p2", 1167 "s5_p1", "s5_p2", 1168 "s6_p1", "s6_p2", 1169 "s7_p1", "s7_p2", 1170 "s8_p1", "s8_p2", 1171 "s9_p1", "s9_p2", 1172 "s10_p1", "s10_p2", 1173 "s0_p1_backup", "s0_p2_backup", 1174 "s1_p1_backup", "s1_p2_backup", 1175 "s2_p1_backup", "s2_p2_backup", 1176 "s3_p1_backup", "s3_p2_backup", 1177 "s4_p1_backup", "s4_p2_backup", 1178 "s5_p1_backup", "s5_p2_backup", 1179 "s6_p1_backup", "s6_p2_backup", 1180 "s7_p1_backup", "s7_p2_backup", 1181 "s8_p1_backup", "s8_p2_backup", 1182 "s9_p1_backup", "s9_p2_backup", 1183 "s10_p1_backup", "s10_p2_backup"; 1184 #qcom,sensors = <11>; 1185 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; 1186 interrupt-names = "uplow"; 1187 #thermal-sensor-cells = <1>; 1188 }; 1189 1190 restart@fc4ab000 { 1191 compatible = "qcom,pshold"; 1192 reg = <0xfc4ab000 0x4>; 1193 }; 1194 1195 qfprom: qfprom@fc4bc000 { 1196 compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; 1197 reg = <0xfc4bc000 0x1000>; 1198 #address-cells = <1>; 1199 #size-cells = <1>; 1200 1201 tsens_base1: base1@d0 { 1202 reg = <0xd0 0x1>; 1203 bits = <0 8>; 1204 }; 1205 1206 tsens_s0_p1: s0-p1@d1 { 1207 reg = <0xd1 0x1>; 1208 bits = <0 6>; 1209 }; 1210 1211 tsens_s1_p1: s1-p1@d2 { 1212 reg = <0xd1 0x2>; 1213 bits = <6 6>; 1214 }; 1215 1216 tsens_s2_p1: s2-p1@d2 { 1217 reg = <0xd2 0x2>; 1218 bits = <4 6>; 1219 }; 1220 1221 tsens_s3_p1: s3-p1@d3 { 1222 reg = <0xd3 0x1>; 1223 bits = <2 6>; 1224 }; 1225 1226 tsens_s4_p1: s4-p1@d4 { 1227 reg = <0xd4 0x1>; 1228 bits = <0 6>; 1229 }; 1230 1231 tsens_s5_p1: s5-p1@d4 { 1232 reg = <0xd4 0x2>; 1233 bits = <6 6>; 1234 }; 1235 1236 tsens_s6_p1: s6-p1@d5 { 1237 reg = <0xd5 0x2>; 1238 bits = <4 6>; 1239 }; 1240 1241 tsens_s7_p1: s7-p1@d6 { 1242 reg = <0xd6 0x1>; 1243 bits = <2 6>; 1244 }; 1245 1246 tsens_s8_p1: s8-p1@d7 { 1247 reg = <0xd7 0x1>; 1248 bits = <0 6>; 1249 }; 1250 1251 tsens_mode: mode@d7 { 1252 reg = <0xd7 0x1>; 1253 bits = <6 2>; 1254 }; 1255 1256 tsens_s9_p1: s9-p1@d8 { 1257 reg = <0xd8 0x1>; 1258 bits = <0 6>; 1259 }; 1260 1261 tsens_s10_p1: s10_p1@d8 { 1262 reg = <0xd8 0x2>; 1263 bits = <6 6>; 1264 }; 1265 1266 tsens_base2: base2@d9 { 1267 reg = <0xd9 0x2>; 1268 bits = <4 8>; 1269 }; 1270 1271 tsens_s0_p2: s0-p2@da { 1272 reg = <0xda 0x2>; 1273 bits = <4 6>; 1274 }; 1275 1276 tsens_s1_p2: s1-p2@db { 1277 reg = <0xdb 0x1>; 1278 bits = <2 6>; 1279 }; 1280 1281 tsens_s2_p2: s2-p2@dc { 1282 reg = <0xdc 0x1>; 1283 bits = <0 6>; 1284 }; 1285 1286 tsens_s3_p2: s3-p2@dc { 1287 reg = <0xdc 0x2>; 1288 bits = <6 6>; 1289 }; 1290 1291 tsens_s4_p2: s4-p2@dd { 1292 reg = <0xdd 0x2>; 1293 bits = <4 6>; 1294 }; 1295 1296 tsens_s5_p2: s5-p2@de { 1297 reg = <0xde 0x2>; 1298 bits = <2 6>; 1299 }; 1300 1301 tsens_s6_p2: s6-p2@df { 1302 reg = <0xdf 0x1>; 1303 bits = <0 6>; 1304 }; 1305 1306 tsens_s7_p2: s7-p2@e0 { 1307 reg = <0xe0 0x1>; 1308 bits = <0 6>; 1309 }; 1310 1311 tsens_s8_p2: s8-p2@e0 { 1312 reg = <0xe0 0x2>; 1313 bits = <6 6>; 1314 }; 1315 1316 tsens_s9_p2: s9-p2@e1 { 1317 reg = <0xe1 0x2>; 1318 bits = <4 6>; 1319 }; 1320 1321 tsens_s10_p2: s10_p2@e2 { 1322 reg = <0xe2 0x2>; 1323 bits = <2 6>; 1324 }; 1325 1326 tsens_s5_p2_backup: s5-p2_backup@e3 { 1327 reg = <0xe3 0x2>; 1328 bits = <0 6>; 1329 }; 1330 1331 tsens_mode_backup: mode_backup@e3 { 1332 reg = <0xe3 0x1>; 1333 bits = <6 2>; 1334 }; 1335 1336 tsens_s6_p2_backup: s6-p2_backup@e4 { 1337 reg = <0xe4 0x1>; 1338 bits = <0 6>; 1339 }; 1340 1341 tsens_s7_p2_backup: s7-p2_backup@e4 { 1342 reg = <0xe4 0x2>; 1343 bits = <6 6>; 1344 }; 1345 1346 tsens_s8_p2_backup: s8-p2_backup@e5 { 1347 reg = <0xe5 0x2>; 1348 bits = <4 6>; 1349 }; 1350 1351 tsens_s9_p2_backup: s9-p2_backup@e6 { 1352 reg = <0xe6 0x2>; 1353 bits = <2 6>; 1354 }; 1355 1356 tsens_s10_p2_backup: s10_p2_backup@e7 { 1357 reg = <0xe7 0x1>; 1358 bits = <0 6>; 1359 }; 1360 1361 tsens_base1_backup: base1_backup@440 { 1362 reg = <0x440 0x1>; 1363 bits = <0 8>; 1364 }; 1365 1366 tsens_s0_p1_backup: s0-p1_backup@441 { 1367 reg = <0x441 0x1>; 1368 bits = <0 6>; 1369 }; 1370 1371 tsens_s1_p1_backup: s1-p1_backup@442 { 1372 reg = <0x441 0x2>; 1373 bits = <6 6>; 1374 }; 1375 1376 tsens_s2_p1_backup: s2-p1_backup@442 { 1377 reg = <0x442 0x2>; 1378 bits = <4 6>; 1379 }; 1380 1381 tsens_s3_p1_backup: s3-p1_backup@443 { 1382 reg = <0x443 0x1>; 1383 bits = <2 6>; 1384 }; 1385 1386 tsens_s4_p1_backup: s4-p1_backup@444 { 1387 reg = <0x444 0x1>; 1388 bits = <0 6>; 1389 }; 1390 1391 tsens_s5_p1_backup: s5-p1_backup@444 { 1392 reg = <0x444 0x2>; 1393 bits = <6 6>; 1394 }; 1395 1396 tsens_s6_p1_backup: s6-p1_backup@445 { 1397 reg = <0x445 0x2>; 1398 bits = <4 6>; 1399 }; 1400 1401 tsens_s7_p1_backup: s7-p1_backup@446 { 1402 reg = <0x446 0x1>; 1403 bits = <2 6>; 1404 }; 1405 1406 tsens_use_backup: use_backup@447 { 1407 reg = <0x447 0x1>; 1408 bits = <5 3>; 1409 }; 1410 1411 tsens_s8_p1_backup: s8-p1_backup@448 { 1412 reg = <0x448 0x1>; 1413 bits = <0 6>; 1414 }; 1415 1416 tsens_s9_p1_backup: s9-p1_backup@448 { 1417 reg = <0x448 0x2>; 1418 bits = <6 6>; 1419 }; 1420 1421 tsens_s10_p1_backup: s10_p1_backup@449 { 1422 reg = <0x449 0x2>; 1423 bits = <4 6>; 1424 }; 1425 1426 tsens_base2_backup: base2_backup@44a { 1427 reg = <0x44a 0x2>; 1428 bits = <2 8>; 1429 }; 1430 1431 tsens_s0_p2_backup: s0-p2_backup@44b { 1432 reg = <0x44b 0x3>; 1433 bits = <2 6>; 1434 }; 1435 1436 tsens_s1_p2_backup: s1-p2_backup@44c { 1437 reg = <0x44c 0x1>; 1438 bits = <0 6>; 1439 }; 1440 1441 tsens_s2_p2_backup: s2-p2_backup@44c { 1442 reg = <0x44c 0x2>; 1443 bits = <6 6>; 1444 }; 1445 1446 tsens_s3_p2_backup: s3-p2_backup@44d { 1447 reg = <0x44d 0x2>; 1448 bits = <4 6>; 1449 }; 1450 1451 tsens_s4_p2_backup: s4-p2_backup@44e { 1452 reg = <0x44e 0x1>; 1453 bits = <2 6>; 1454 }; 1455 }; 1456 1457 spmi_bus: spmi@fc4cf000 { 1458 compatible = "qcom,spmi-pmic-arb"; 1459 reg-names = "core", "intr", "cnfg"; 1460 reg = <0xfc4cf000 0x1000>, 1461 <0xfc4cb000 0x1000>, 1462 <0xfc4ca000 0x1000>; 1463 interrupt-names = "periph_irq"; 1464 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 1465 qcom,ee = <0>; 1466 qcom,channel = <0>; 1467 #address-cells = <2>; 1468 #size-cells = <0>; 1469 interrupt-controller; 1470 #interrupt-cells = <4>; 1471 }; 1472 1473 bam_dmux_dma: dma-controller@fc834000 { 1474 compatible = "qcom,bam-v1.4.0"; 1475 reg = <0xfc834000 0x7000>; 1476 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1477 #dma-cells = <1>; 1478 qcom,ee = <0>; 1479 1480 num-channels = <6>; 1481 qcom,num-ees = <1>; 1482 qcom,powered-remotely; 1483 }; 1484 1485 remoteproc_mss: remoteproc@fc880000 { 1486 compatible = "qcom,msm8974-mss-pil"; 1487 reg = <0xfc880000 0x100>, <0xfc820000 0x020>; 1488 reg-names = "qdsp6", "rmb"; 1489 1490 interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, 1491 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1492 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 1493 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 1494 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 1495 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 1496 1497 clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, 1498 <&gcc GCC_MSS_CFG_AHB_CLK>, 1499 <&gcc GCC_BOOT_ROM_AHB_CLK>, 1500 <&xo_board>; 1501 clock-names = "iface", "bus", "mem", "xo"; 1502 1503 resets = <&gcc GCC_MSS_RESTART>; 1504 reset-names = "mss_restart"; 1505 1506 qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>; 1507 1508 qcom,smem-states = <&modem_smp2p_out 0>; 1509 qcom,smem-state-names = "stop"; 1510 1511 status = "disabled"; 1512 1513 mba { 1514 memory-region = <&mba_region>; 1515 }; 1516 1517 mpss { 1518 memory-region = <&mpss_region>; 1519 }; 1520 1521 bam_dmux: bam-dmux { 1522 compatible = "qcom,bam-dmux"; 1523 1524 interrupt-parent = <&modem_smsm>; 1525 interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; 1526 interrupt-names = "pc", "pc-ack"; 1527 1528 qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; 1529 qcom,smem-state-names = "pc", "pc-ack"; 1530 1531 dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; 1532 dma-names = "tx", "rx"; 1533 }; 1534 1535 smd-edge { 1536 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; 1537 1538 qcom,ipc = <&apcs 8 12>; 1539 qcom,smd-edge = <0>; 1540 1541 label = "modem"; 1542 }; 1543 }; 1544 1545 tcsr_mutex: hwlock@fd484000 { 1546 compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon"; 1547 reg = <0xfd484000 0x2000>; 1548 #hwlock-cells = <1>; 1549 }; 1550 1551 tcsr: syscon@fd4a0000 { 1552 compatible = "qcom,tcsr-msm8974", "syscon"; 1553 reg = <0xfd4a0000 0x10000>; 1554 }; 1555 1556 tlmm: pinctrl@fd510000 { 1557 compatible = "qcom,msm8974-pinctrl"; 1558 reg = <0xfd510000 0x4000>; 1559 gpio-controller; 1560 gpio-ranges = <&tlmm 0 0 146>; 1561 #gpio-cells = <2>; 1562 interrupt-controller; 1563 #interrupt-cells = <2>; 1564 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 1565 1566 sdc1_off: sdc1-off-state { 1567 clk-pins { 1568 pins = "sdc1_clk"; 1569 bias-disable; 1570 drive-strength = <2>; 1571 }; 1572 1573 cmd-pins { 1574 pins = "sdc1_cmd"; 1575 bias-pull-up; 1576 drive-strength = <2>; 1577 }; 1578 1579 data-pins { 1580 pins = "sdc1_data"; 1581 bias-pull-up; 1582 drive-strength = <2>; 1583 }; 1584 }; 1585 1586 sdc2_off: sdc2-off-state { 1587 clk-pins { 1588 pins = "sdc2_clk"; 1589 bias-disable; 1590 drive-strength = <2>; 1591 }; 1592 1593 cmd-pins { 1594 pins = "sdc2_cmd"; 1595 bias-pull-up; 1596 drive-strength = <2>; 1597 }; 1598 1599 data-pins { 1600 pins = "sdc2_data"; 1601 bias-pull-up; 1602 drive-strength = <2>; 1603 }; 1604 1605 cd-pins { 1606 pins = "gpio54"; 1607 function = "gpio"; 1608 bias-disable; 1609 drive-strength = <2>; 1610 }; 1611 }; 1612 1613 blsp1_uart2_default: blsp1-uart2-default-state { 1614 rx-pins { 1615 pins = "gpio5"; 1616 function = "blsp_uart2"; 1617 drive-strength = <2>; 1618 bias-pull-up; 1619 }; 1620 1621 tx-pins { 1622 pins = "gpio4"; 1623 function = "blsp_uart2"; 1624 drive-strength = <4>; 1625 bias-disable; 1626 }; 1627 }; 1628 1629 blsp2_uart1_default: blsp2-uart1-default-state { 1630 tx-rts-pins { 1631 pins = "gpio41", "gpio44"; 1632 function = "blsp_uart7"; 1633 drive-strength = <2>; 1634 bias-disable; 1635 }; 1636 1637 rx-cts-pins { 1638 pins = "gpio42", "gpio43"; 1639 function = "blsp_uart7"; 1640 drive-strength = <2>; 1641 bias-pull-up; 1642 }; 1643 }; 1644 1645 blsp2_uart1_sleep: blsp2-uart1-sleep-state { 1646 pins = "gpio41", "gpio42", "gpio43", "gpio44"; 1647 function = "gpio"; 1648 drive-strength = <2>; 1649 bias-pull-down; 1650 }; 1651 1652 blsp2_uart4_default: blsp2-uart4-default-state { 1653 tx-rts-pins { 1654 pins = "gpio53", "gpio56"; 1655 function = "blsp_uart10"; 1656 drive-strength = <2>; 1657 bias-disable; 1658 }; 1659 1660 rx-cts-pins { 1661 pins = "gpio54", "gpio55"; 1662 function = "blsp_uart10"; 1663 drive-strength = <2>; 1664 bias-pull-up; 1665 }; 1666 }; 1667 1668 blsp1_i2c1_default: blsp1-i2c1-default-state { 1669 pins = "gpio2", "gpio3"; 1670 function = "blsp_i2c1"; 1671 drive-strength = <2>; 1672 bias-disable; 1673 }; 1674 1675 blsp1_i2c1_sleep: blsp1-i2c1-sleep-state { 1676 pins = "gpio2", "gpio3"; 1677 function = "blsp_i2c1"; 1678 drive-strength = <2>; 1679 bias-pull-up; 1680 }; 1681 1682 blsp1_i2c2_default: blsp1-i2c2-default-state { 1683 pins = "gpio6", "gpio7"; 1684 function = "blsp_i2c2"; 1685 drive-strength = <2>; 1686 bias-disable; 1687 }; 1688 1689 blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { 1690 pins = "gpio6", "gpio7"; 1691 function = "blsp_i2c2"; 1692 drive-strength = <2>; 1693 bias-pull-up; 1694 }; 1695 1696 blsp1_i2c3_default: blsp1-i2c3-default-state { 1697 pins = "gpio10", "gpio11"; 1698 function = "blsp_i2c3"; 1699 drive-strength = <2>; 1700 bias-disable; 1701 }; 1702 1703 blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { 1704 pins = "gpio10", "gpio11"; 1705 function = "blsp_i2c3"; 1706 drive-strength = <2>; 1707 bias-pull-up; 1708 }; 1709 1710 /* BLSP1_I2C4 info is missing */ 1711 1712 /* BLSP1_I2C5 info is missing */ 1713 1714 blsp1_i2c6_default: blsp1-i2c6-default-state { 1715 pins = "gpio29", "gpio30"; 1716 function = "blsp_i2c6"; 1717 drive-strength = <2>; 1718 bias-disable; 1719 }; 1720 1721 blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { 1722 pins = "gpio29", "gpio30"; 1723 function = "blsp_i2c6"; 1724 drive-strength = <2>; 1725 bias-pull-up; 1726 }; 1727 /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ 1728 1729 /* BLSP2_I2C1 info is missing */ 1730 1731 blsp2_i2c2_default: blsp2-i2c2-default-state { 1732 pins = "gpio47", "gpio48"; 1733 function = "blsp_i2c8"; 1734 drive-strength = <2>; 1735 bias-disable; 1736 }; 1737 1738 blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { 1739 pins = "gpio47", "gpio48"; 1740 function = "blsp_i2c8"; 1741 drive-strength = <2>; 1742 bias-pull-up; 1743 }; 1744 1745 /* BLSP2_I2C3 info is missing */ 1746 1747 /* BLSP2_I2C4 info is missing */ 1748 1749 blsp2_i2c5_default: blsp2-i2c5-default-state { 1750 pins = "gpio83", "gpio84"; 1751 function = "blsp_i2c11"; 1752 drive-strength = <2>; 1753 bias-disable; 1754 }; 1755 1756 blsp2_i2c5_sleep: blsp2-i2c5-sleep-state { 1757 pins = "gpio83", "gpio84"; 1758 function = "blsp_i2c11"; 1759 drive-strength = <2>; 1760 bias-pull-up; 1761 }; 1762 1763 blsp2_i2c6_default: blsp2-i2c6-default-state { 1764 pins = "gpio87", "gpio88"; 1765 function = "blsp_i2c12"; 1766 drive-strength = <2>; 1767 bias-disable; 1768 }; 1769 1770 blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { 1771 pins = "gpio87", "gpio88"; 1772 function = "blsp_i2c12"; 1773 drive-strength = <2>; 1774 bias-pull-up; 1775 }; 1776 1777 cci_default: cci-default-state { 1778 cci_i2c0_default: cci-i2c0-default-pins { 1779 pins = "gpio19", "gpio20"; 1780 function = "cci_i2c0"; 1781 drive-strength = <2>; 1782 bias-disable; 1783 }; 1784 1785 cci_i2c1_default: cci-i2c1-default-pins { 1786 pins = "gpio21", "gpio22"; 1787 function = "cci_i2c1"; 1788 drive-strength = <2>; 1789 bias-disable; 1790 }; 1791 }; 1792 1793 cci_sleep: cci-sleep-state { 1794 cci_i2c0_sleep: cci-i2c0-sleep-pins { 1795 pins = "gpio19", "gpio20"; 1796 function = "gpio"; 1797 drive-strength = <2>; 1798 bias-disable; 1799 }; 1800 1801 cci_i2c1_sleep: cci-i2c1-sleep-pins { 1802 pins = "gpio21", "gpio22"; 1803 function = "gpio"; 1804 drive-strength = <2>; 1805 bias-disable; 1806 }; 1807 }; 1808 1809 spi8_default: spi8_default-state { 1810 mosi-pins { 1811 pins = "gpio45"; 1812 function = "blsp_spi8"; 1813 }; 1814 miso-pins { 1815 pins = "gpio46"; 1816 function = "blsp_spi8"; 1817 }; 1818 cs-pins { 1819 pins = "gpio47"; 1820 function = "blsp_spi8"; 1821 }; 1822 clk-pins { 1823 pins = "gpio48"; 1824 function = "blsp_spi8"; 1825 }; 1826 }; 1827 }; 1828 1829 mmcc: clock-controller@fd8c0000 { 1830 compatible = "qcom,mmcc-msm8974"; 1831 #clock-cells = <1>; 1832 #reset-cells = <1>; 1833 #power-domain-cells = <1>; 1834 reg = <0xfd8c0000 0x6000>; 1835 clocks = <&xo_board>, 1836 <&gcc GCC_MMSS_GPLL0_CLK_SRC>, 1837 <&gcc GPLL0_VOTE>, 1838 <&gcc GPLL1_VOTE>, 1839 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, 1840 <&mdss_dsi0_phy 1>, 1841 <&mdss_dsi0_phy 0>, 1842 <&mdss_dsi1_phy 1>, 1843 <&mdss_dsi1_phy 0>, 1844 <0>, 1845 <0>, 1846 <0>; 1847 clock-names = "xo", 1848 "mmss_gpll0_vote", 1849 "gpll0_vote", 1850 "gpll1_vote", 1851 "gfx3d_clk_src", 1852 "dsi0pll", 1853 "dsi0pllbyte", 1854 "dsi1pll", 1855 "dsi1pllbyte", 1856 "hdmipll", 1857 "edp_link_clk", 1858 "edp_vco_div"; 1859 }; 1860 1861 mdss: display-subsystem@fd900000 { 1862 compatible = "qcom,mdss"; 1863 reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; 1864 reg-names = "mdss_phys", "vbif_phys"; 1865 1866 power-domains = <&mmcc MDSS_GDSC>; 1867 1868 clocks = <&mmcc MDSS_AHB_CLK>, 1869 <&mmcc MDSS_AXI_CLK>, 1870 <&mmcc MDSS_VSYNC_CLK>; 1871 clock-names = "iface", "bus", "vsync"; 1872 1873 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 1874 1875 interrupt-controller; 1876 #interrupt-cells = <1>; 1877 1878 status = "disabled"; 1879 1880 #address-cells = <1>; 1881 #size-cells = <1>; 1882 ranges; 1883 1884 mdp: display-controller@fd900000 { 1885 compatible = "qcom,msm8974-mdp5", "qcom,mdp5"; 1886 reg = <0xfd900100 0x22000>; 1887 reg-names = "mdp_phys"; 1888 1889 interrupt-parent = <&mdss>; 1890 interrupts = <0>; 1891 1892 clocks = <&mmcc MDSS_AHB_CLK>, 1893 <&mmcc MDSS_AXI_CLK>, 1894 <&mmcc MDSS_MDP_CLK>, 1895 <&mmcc MDSS_VSYNC_CLK>; 1896 clock-names = "iface", "bus", "core", "vsync"; 1897 1898 interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; 1899 interconnect-names = "mdp0-mem"; 1900 1901 ports { 1902 #address-cells = <1>; 1903 #size-cells = <0>; 1904 1905 port@0 { 1906 reg = <0>; 1907 mdp5_intf1_out: endpoint { 1908 remote-endpoint = <&mdss_dsi0_in>; 1909 }; 1910 }; 1911 1912 port@1 { 1913 reg = <1>; 1914 mdp5_intf2_out: endpoint { 1915 remote-endpoint = <&mdss_dsi1_in>; 1916 }; 1917 }; 1918 }; 1919 }; 1920 1921 mdss_dsi0: dsi@fd922800 { 1922 compatible = "qcom,msm8974-dsi-ctrl", 1923 "qcom,mdss-dsi-ctrl"; 1924 reg = <0xfd922800 0x1f8>; 1925 reg-names = "dsi_ctrl"; 1926 1927 interrupt-parent = <&mdss>; 1928 interrupts = <4>; 1929 1930 assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; 1931 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; 1932 1933 clocks = <&mmcc MDSS_MDP_CLK>, 1934 <&mmcc MDSS_AHB_CLK>, 1935 <&mmcc MDSS_AXI_CLK>, 1936 <&mmcc MDSS_BYTE0_CLK>, 1937 <&mmcc MDSS_PCLK0_CLK>, 1938 <&mmcc MDSS_ESC0_CLK>, 1939 <&mmcc MMSS_MISC_AHB_CLK>; 1940 clock-names = "mdp_core", 1941 "iface", 1942 "bus", 1943 "byte", 1944 "pixel", 1945 "core", 1946 "core_mmss"; 1947 1948 phys = <&mdss_dsi0_phy>; 1949 1950 status = "disabled"; 1951 1952 #address-cells = <1>; 1953 #size-cells = <0>; 1954 1955 ports { 1956 #address-cells = <1>; 1957 #size-cells = <0>; 1958 1959 port@0 { 1960 reg = <0>; 1961 mdss_dsi0_in: endpoint { 1962 remote-endpoint = <&mdp5_intf1_out>; 1963 }; 1964 }; 1965 1966 port@1 { 1967 reg = <1>; 1968 mdss_dsi0_out: endpoint { 1969 }; 1970 }; 1971 }; 1972 }; 1973 1974 mdss_dsi0_phy: phy@fd922a00 { 1975 compatible = "qcom,dsi-phy-28nm-hpm"; 1976 reg = <0xfd922a00 0xd4>, 1977 <0xfd922b00 0x280>, 1978 <0xfd922d80 0x30>; 1979 reg-names = "dsi_pll", 1980 "dsi_phy", 1981 "dsi_phy_regulator"; 1982 1983 #clock-cells = <1>; 1984 #phy-cells = <0>; 1985 1986 clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; 1987 clock-names = "iface", "ref"; 1988 1989 status = "disabled"; 1990 }; 1991 1992 mdss_dsi1: dsi@fd922e00 { 1993 compatible = "qcom,msm8974-dsi-ctrl", 1994 "qcom,mdss-dsi-ctrl"; 1995 reg = <0xfd922e00 0x1f8>; 1996 reg-names = "dsi_ctrl"; 1997 1998 interrupt-parent = <&mdss>; 1999 interrupts = <4>; 2000 2001 assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; 2002 assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; 2003 2004 clocks = <&mmcc MDSS_MDP_CLK>, 2005 <&mmcc MDSS_AHB_CLK>, 2006 <&mmcc MDSS_AXI_CLK>, 2007 <&mmcc MDSS_BYTE1_CLK>, 2008 <&mmcc MDSS_PCLK1_CLK>, 2009 <&mmcc MDSS_ESC1_CLK>, 2010 <&mmcc MMSS_MISC_AHB_CLK>; 2011 clock-names = "mdp_core", 2012 "iface", 2013 "bus", 2014 "byte", 2015 "pixel", 2016 "core", 2017 "core_mmss"; 2018 2019 phys = <&mdss_dsi1_phy>; 2020 2021 status = "disabled"; 2022 2023 #address-cells = <1>; 2024 #size-cells = <0>; 2025 2026 ports { 2027 #address-cells = <1>; 2028 #size-cells = <0>; 2029 2030 port@0 { 2031 reg = <0>; 2032 mdss_dsi1_in: endpoint { 2033 remote-endpoint = <&mdp5_intf2_out>; 2034 }; 2035 }; 2036 2037 port@1 { 2038 reg = <1>; 2039 mdss_dsi1_out: endpoint { 2040 }; 2041 }; 2042 }; 2043 }; 2044 2045 mdss_dsi1_phy: phy@fd923000 { 2046 compatible = "qcom,dsi-phy-28nm-hpm"; 2047 reg = <0xfd923000 0xd4>, 2048 <0xfd923100 0x280>, 2049 <0xfd923380 0x30>; 2050 reg-names = "dsi_pll", 2051 "dsi_phy", 2052 "dsi_phy_regulator"; 2053 2054 #clock-cells = <1>; 2055 #phy-cells = <0>; 2056 2057 clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; 2058 clock-names = "iface", "ref"; 2059 2060 status = "disabled"; 2061 }; 2062 }; 2063 2064 cci: cci@fda0c000 { 2065 compatible = "qcom,msm8974-cci"; 2066 #address-cells = <1>; 2067 #size-cells = <0>; 2068 reg = <0xfda0c000 0x1000>; 2069 interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; 2070 clocks = <&mmcc CAMSS_TOP_AHB_CLK>, 2071 <&mmcc CAMSS_CCI_CCI_AHB_CLK>, 2072 <&mmcc CAMSS_CCI_CCI_CLK>; 2073 clock-names = "camss_top_ahb", 2074 "cci_ahb", 2075 "cci"; 2076 2077 pinctrl-names = "default", "sleep"; 2078 pinctrl-0 = <&cci_default>; 2079 pinctrl-1 = <&cci_sleep>; 2080 2081 status = "disabled"; 2082 2083 cci_i2c0: i2c-bus@0 { 2084 reg = <0>; 2085 clock-frequency = <100000>; 2086 #address-cells = <1>; 2087 #size-cells = <0>; 2088 }; 2089 2090 cci_i2c1: i2c-bus@1 { 2091 reg = <1>; 2092 clock-frequency = <100000>; 2093 #address-cells = <1>; 2094 #size-cells = <0>; 2095 }; 2096 }; 2097 2098 gpu: adreno@fdb00000 { 2099 compatible = "qcom,adreno-330.1", "qcom,adreno"; 2100 reg = <0xfdb00000 0x10000>; 2101 reg-names = "kgsl_3d0_reg_memory"; 2102 2103 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 2104 interrupt-names = "kgsl_3d0_irq"; 2105 2106 clocks = <&mmcc OXILI_GFX3D_CLK>, 2107 <&mmcc OXILICX_AHB_CLK>, 2108 <&mmcc OXILICX_AXI_CLK>; 2109 clock-names = "core", "iface", "mem_iface"; 2110 2111 sram = <&gmu_sram>; 2112 power-domains = <&mmcc OXILICX_GDSC>; 2113 operating-points-v2 = <&gpu_opp_table>; 2114 2115 interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, 2116 <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; 2117 interconnect-names = "gfx-mem", "ocmem"; 2118 2119 // iommus = <&gpu_iommu 0>; 2120 2121 status = "disabled"; 2122 2123 gpu_opp_table: opp-table { 2124 compatible = "operating-points-v2"; 2125 2126 opp-320000000 { 2127 opp-hz = /bits/ 64 <320000000>; 2128 }; 2129 2130 opp-200000000 { 2131 opp-hz = /bits/ 64 <200000000>; 2132 }; 2133 2134 opp-27000000 { 2135 opp-hz = /bits/ 64 <27000000>; 2136 }; 2137 }; 2138 }; 2139 2140 sram@fdd00000 { 2141 compatible = "qcom,msm8974-ocmem"; 2142 reg = <0xfdd00000 0x2000>, 2143 <0xfec00000 0x180000>; 2144 reg-names = "ctrl", "mem"; 2145 ranges = <0 0xfec00000 0x180000>; 2146 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, 2147 <&mmcc OCMEMCX_OCMEMNOC_CLK>; 2148 clock-names = "core", "iface"; 2149 2150 #address-cells = <1>; 2151 #size-cells = <1>; 2152 2153 gmu_sram: gmu-sram@0 { 2154 reg = <0x0 0x100000>; 2155 }; 2156 }; 2157 2158 remoteproc_adsp: remoteproc@fe200000 { 2159 compatible = "qcom,msm8974-adsp-pil"; 2160 reg = <0xfe200000 0x100>; 2161 2162 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, 2163 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 2164 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 2165 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 2166 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; 2167 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; 2168 2169 clocks = <&xo_board>; 2170 clock-names = "xo"; 2171 2172 memory-region = <&adsp_region>; 2173 2174 qcom,smem-states = <&adsp_smp2p_out 0>; 2175 qcom,smem-state-names = "stop"; 2176 2177 status = "disabled"; 2178 2179 smd-edge { 2180 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; 2181 2182 qcom,ipc = <&apcs 8 8>; 2183 qcom,smd-edge = <1>; 2184 label = "lpass"; 2185 }; 2186 }; 2187 2188 imem: sram@fe805000 { 2189 compatible = "qcom,msm8974-imem", "syscon", "simple-mfd"; 2190 reg = <0xfe805000 0x1000>; 2191 2192 reboot-mode { 2193 compatible = "syscon-reboot-mode"; 2194 offset = <0x65c>; 2195 }; 2196 }; 2197 }; 2198 2199 thermal-zones { 2200 cpu0-thermal { 2201 polling-delay-passive = <250>; 2202 polling-delay = <1000>; 2203 2204 thermal-sensors = <&tsens 5>; 2205 2206 trips { 2207 cpu_alert0: trip0 { 2208 temperature = <75000>; 2209 hysteresis = <2000>; 2210 type = "passive"; 2211 }; 2212 cpu_crit0: trip1 { 2213 temperature = <110000>; 2214 hysteresis = <2000>; 2215 type = "critical"; 2216 }; 2217 }; 2218 }; 2219 2220 cpu1-thermal { 2221 polling-delay-passive = <250>; 2222 polling-delay = <1000>; 2223 2224 thermal-sensors = <&tsens 6>; 2225 2226 trips { 2227 cpu_alert1: trip0 { 2228 temperature = <75000>; 2229 hysteresis = <2000>; 2230 type = "passive"; 2231 }; 2232 cpu_crit1: trip1 { 2233 temperature = <110000>; 2234 hysteresis = <2000>; 2235 type = "critical"; 2236 }; 2237 }; 2238 }; 2239 2240 cpu2-thermal { 2241 polling-delay-passive = <250>; 2242 polling-delay = <1000>; 2243 2244 thermal-sensors = <&tsens 7>; 2245 2246 trips { 2247 cpu_alert2: trip0 { 2248 temperature = <75000>; 2249 hysteresis = <2000>; 2250 type = "passive"; 2251 }; 2252 cpu_crit2: trip1 { 2253 temperature = <110000>; 2254 hysteresis = <2000>; 2255 type = "critical"; 2256 }; 2257 }; 2258 }; 2259 2260 cpu3-thermal { 2261 polling-delay-passive = <250>; 2262 polling-delay = <1000>; 2263 2264 thermal-sensors = <&tsens 8>; 2265 2266 trips { 2267 cpu_alert3: trip0 { 2268 temperature = <75000>; 2269 hysteresis = <2000>; 2270 type = "passive"; 2271 }; 2272 cpu_crit3: trip1 { 2273 temperature = <110000>; 2274 hysteresis = <2000>; 2275 type = "critical"; 2276 }; 2277 }; 2278 }; 2279 2280 q6-dsp-thermal { 2281 polling-delay-passive = <250>; 2282 polling-delay = <1000>; 2283 2284 thermal-sensors = <&tsens 1>; 2285 2286 trips { 2287 q6_dsp_alert0: trip-point0 { 2288 temperature = <90000>; 2289 hysteresis = <2000>; 2290 type = "hot"; 2291 }; 2292 }; 2293 }; 2294 2295 modemtx-thermal { 2296 polling-delay-passive = <250>; 2297 polling-delay = <1000>; 2298 2299 thermal-sensors = <&tsens 2>; 2300 2301 trips { 2302 modemtx_alert0: trip-point0 { 2303 temperature = <90000>; 2304 hysteresis = <2000>; 2305 type = "hot"; 2306 }; 2307 }; 2308 }; 2309 2310 video-thermal { 2311 polling-delay-passive = <250>; 2312 polling-delay = <1000>; 2313 2314 thermal-sensors = <&tsens 3>; 2315 2316 trips { 2317 video_alert0: trip-point0 { 2318 temperature = <95000>; 2319 hysteresis = <2000>; 2320 type = "hot"; 2321 }; 2322 }; 2323 }; 2324 2325 wlan-thermal { 2326 polling-delay-passive = <250>; 2327 polling-delay = <1000>; 2328 2329 thermal-sensors = <&tsens 4>; 2330 2331 trips { 2332 wlan_alert0: trip-point0 { 2333 temperature = <105000>; 2334 hysteresis = <2000>; 2335 type = "hot"; 2336 }; 2337 }; 2338 }; 2339 2340 gpu-top-thermal { 2341 polling-delay-passive = <250>; 2342 polling-delay = <1000>; 2343 2344 thermal-sensors = <&tsens 9>; 2345 2346 trips { 2347 gpu1_alert0: trip-point0 { 2348 temperature = <90000>; 2349 hysteresis = <2000>; 2350 type = "hot"; 2351 }; 2352 }; 2353 }; 2354 2355 gpu-bottom-thermal { 2356 polling-delay-passive = <250>; 2357 polling-delay = <1000>; 2358 2359 thermal-sensors = <&tsens 10>; 2360 2361 trips { 2362 gpu2_alert0: trip-point0 { 2363 temperature = <90000>; 2364 hysteresis = <2000>; 2365 type = "hot"; 2366 }; 2367 }; 2368 }; 2369 }; 2370 2371 timer { 2372 compatible = "arm,armv7-timer"; 2373 interrupts = <GIC_PPI 2 0xf08>, 2374 <GIC_PPI 3 0xf08>, 2375 <GIC_PPI 4 0xf08>, 2376 <GIC_PPI 1 0xf08>; 2377 clock-frequency = <19200000>; 2378 }; 2379 2380 vreg_boost: vreg-boost { 2381 compatible = "regulator-fixed"; 2382 2383 regulator-name = "vreg-boost"; 2384 regulator-min-microvolt = <3150000>; 2385 regulator-max-microvolt = <3150000>; 2386 2387 regulator-always-on; 2388 regulator-boot-on; 2389 2390 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; 2391 enable-active-high; 2392 2393 pinctrl-names = "default"; 2394 pinctrl-0 = <&boost_bypass_n_pin>; 2395 }; 2396 2397 vreg_vph_pwr: vreg-vph-pwr { 2398 compatible = "regulator-fixed"; 2399 regulator-name = "vph-pwr"; 2400 2401 regulator-min-microvolt = <3600000>; 2402 regulator-max-microvolt = <3600000>; 2403 2404 regulator-always-on; 2405 }; 2406}; 2407