1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interconnect/qcom,msm8974.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/clock/qcom,gcc-msm8974.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/reset/qcom,gcc-msm8974.h>
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	#address-cells = <1>;
14	#size-cells = <1>;
15	interrupt-parent = <&intc>;
16
17	clocks {
18		xo_board: xo_board {
19			compatible = "fixed-clock";
20			#clock-cells = <0>;
21			clock-frequency = <19200000>;
22		};
23
24		sleep_clk: sleep_clk {
25			compatible = "fixed-clock";
26			#clock-cells = <0>;
27			clock-frequency = <32768>;
28		};
29	};
30
31	cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34		interrupts = <GIC_PPI 9 0xf04>;
35
36		CPU0: cpu@0 {
37			compatible = "qcom,krait";
38			enable-method = "qcom,kpss-acc-v2";
39			device_type = "cpu";
40			reg = <0>;
41			next-level-cache = <&L2>;
42			qcom,acc = <&acc0>;
43			qcom,saw = <&saw0>;
44			cpu-idle-states = <&CPU_SPC>;
45		};
46
47		CPU1: cpu@1 {
48			compatible = "qcom,krait";
49			enable-method = "qcom,kpss-acc-v2";
50			device_type = "cpu";
51			reg = <1>;
52			next-level-cache = <&L2>;
53			qcom,acc = <&acc1>;
54			qcom,saw = <&saw1>;
55			cpu-idle-states = <&CPU_SPC>;
56		};
57
58		CPU2: cpu@2 {
59			compatible = "qcom,krait";
60			enable-method = "qcom,kpss-acc-v2";
61			device_type = "cpu";
62			reg = <2>;
63			next-level-cache = <&L2>;
64			qcom,acc = <&acc2>;
65			qcom,saw = <&saw2>;
66			cpu-idle-states = <&CPU_SPC>;
67		};
68
69		CPU3: cpu@3 {
70			compatible = "qcom,krait";
71			enable-method = "qcom,kpss-acc-v2";
72			device_type = "cpu";
73			reg = <3>;
74			next-level-cache = <&L2>;
75			qcom,acc = <&acc3>;
76			qcom,saw = <&saw3>;
77			cpu-idle-states = <&CPU_SPC>;
78		};
79
80		L2: l2-cache {
81			compatible = "cache";
82			cache-level = <2>;
83			cache-unified;
84			qcom,saw = <&saw_l2>;
85		};
86
87		idle-states {
88			CPU_SPC: spc {
89				compatible = "qcom,idle-state-spc",
90						"arm,idle-state";
91				entry-latency-us = <150>;
92				exit-latency-us = <200>;
93				min-residency-us = <2000>;
94			};
95		};
96	};
97
98	firmware {
99		scm {
100			compatible = "qcom,scm-msm8974", "qcom,scm";
101			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
102			clock-names = "core", "bus", "iface";
103		};
104	};
105
106	memory {
107		device_type = "memory";
108		reg = <0x0 0x0>;
109	};
110
111	pmu {
112		compatible = "qcom,krait-pmu";
113		interrupts = <GIC_PPI 7 0xf04>;
114	};
115
116	reserved-memory {
117		#address-cells = <1>;
118		#size-cells = <1>;
119		ranges;
120
121		mpss_region: mpss@8000000 {
122			reg = <0x08000000 0x5100000>;
123			no-map;
124		};
125
126		mba_region: mba@d100000 {
127			reg = <0x0d100000 0x100000>;
128			no-map;
129		};
130
131		wcnss_region: wcnss@d200000 {
132			reg = <0x0d200000 0xa00000>;
133			no-map;
134		};
135
136		adsp_region: adsp@dc00000 {
137			reg = <0x0dc00000 0x1900000>;
138			no-map;
139		};
140
141		venus_region: memory@f500000 {
142			reg = <0x0f500000 0x500000>;
143			no-map;
144		};
145
146		smem_region: smem@fa00000 {
147			reg = <0xfa00000 0x200000>;
148			no-map;
149		};
150
151		tz_region: memory@fc00000 {
152			reg = <0x0fc00000 0x160000>;
153			no-map;
154		};
155
156		rfsa_mem: memory@fd60000 {
157			reg = <0x0fd60000 0x20000>;
158			no-map;
159		};
160
161		rmtfs@fd80000 {
162			compatible = "qcom,rmtfs-mem";
163			reg = <0x0fd80000 0x180000>;
164			no-map;
165
166			qcom,client-id = <1>;
167		};
168	};
169
170	smem {
171		compatible = "qcom,smem";
172
173		memory-region = <&smem_region>;
174		qcom,rpm-msg-ram = <&rpm_msg_ram>;
175
176		hwlocks = <&tcsr_mutex 3>;
177	};
178
179	smp2p-adsp {
180		compatible = "qcom,smp2p";
181		qcom,smem = <443>, <429>;
182
183		interrupt-parent = <&intc>;
184		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
185
186		qcom,ipc = <&apcs 8 10>;
187
188		qcom,local-pid = <0>;
189		qcom,remote-pid = <2>;
190
191		adsp_smp2p_out: master-kernel {
192			qcom,entry-name = "master-kernel";
193			#qcom,smem-state-cells = <1>;
194		};
195
196		adsp_smp2p_in: slave-kernel {
197			qcom,entry-name = "slave-kernel";
198
199			interrupt-controller;
200			#interrupt-cells = <2>;
201		};
202	};
203
204	smp2p-modem {
205		compatible = "qcom,smp2p";
206		qcom,smem = <435>, <428>;
207
208		interrupt-parent = <&intc>;
209		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
210
211		qcom,ipc = <&apcs 8 14>;
212
213		qcom,local-pid = <0>;
214		qcom,remote-pid = <1>;
215
216		modem_smp2p_out: master-kernel {
217			qcom,entry-name = "master-kernel";
218			#qcom,smem-state-cells = <1>;
219		};
220
221		modem_smp2p_in: slave-kernel {
222			qcom,entry-name = "slave-kernel";
223
224			interrupt-controller;
225			#interrupt-cells = <2>;
226		};
227	};
228
229	smp2p-wcnss {
230		compatible = "qcom,smp2p";
231		qcom,smem = <451>, <431>;
232
233		interrupt-parent = <&intc>;
234		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
235
236		qcom,ipc = <&apcs 8 18>;
237
238		qcom,local-pid = <0>;
239		qcom,remote-pid = <4>;
240
241		wcnss_smp2p_out: master-kernel {
242			qcom,entry-name = "master-kernel";
243
244			#qcom,smem-state-cells = <1>;
245		};
246
247		wcnss_smp2p_in: slave-kernel {
248			qcom,entry-name = "slave-kernel";
249
250			interrupt-controller;
251			#interrupt-cells = <2>;
252		};
253	};
254
255	smsm {
256		compatible = "qcom,smsm";
257
258		#address-cells = <1>;
259		#size-cells = <0>;
260
261		qcom,ipc-1 = <&apcs 8 13>;
262		qcom,ipc-2 = <&apcs 8 9>;
263		qcom,ipc-3 = <&apcs 8 19>;
264
265		apps_smsm: apps@0 {
266			reg = <0>;
267
268			#qcom,smem-state-cells = <1>;
269		};
270
271		modem_smsm: modem@1 {
272			reg = <1>;
273			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
274
275			interrupt-controller;
276			#interrupt-cells = <2>;
277		};
278
279		adsp_smsm: adsp@2 {
280			reg = <2>;
281			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
282
283			interrupt-controller;
284			#interrupt-cells = <2>;
285		};
286
287		wcnss_smsm: wcnss@7 {
288			reg = <7>;
289			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
290
291			interrupt-controller;
292			#interrupt-cells = <2>;
293		};
294	};
295
296	smd {
297		compatible = "qcom,smd";
298
299		rpm {
300			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
301			qcom,ipc = <&apcs 8 0>;
302			qcom,smd-edge = <15>;
303
304			rpm_requests: rpm-requests {
305				compatible = "qcom,rpm-msm8974";
306				qcom,smd-channels = "rpm_requests";
307
308				rpmcc: clock-controller {
309					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
310					#clock-cells = <1>;
311					clocks = <&xo_board>;
312					clock-names = "xo";
313				};
314			};
315		};
316	};
317
318	soc: soc {
319		#address-cells = <1>;
320		#size-cells = <1>;
321		ranges;
322		compatible = "simple-bus";
323
324		intc: interrupt-controller@f9000000 {
325			compatible = "qcom,msm-qgic2";
326			interrupt-controller;
327			#interrupt-cells = <3>;
328			reg = <0xf9000000 0x1000>,
329			      <0xf9002000 0x1000>;
330		};
331
332		apcs: syscon@f9011000 {
333			compatible = "syscon";
334			reg = <0xf9011000 0x1000>;
335		};
336
337		timer@f9020000 {
338			#address-cells = <1>;
339			#size-cells = <1>;
340			ranges;
341			compatible = "arm,armv7-timer-mem";
342			reg = <0xf9020000 0x1000>;
343			clock-frequency = <19200000>;
344
345			frame@f9021000 {
346				frame-number = <0>;
347				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
348					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
349				reg = <0xf9021000 0x1000>,
350				      <0xf9022000 0x1000>;
351			};
352
353			frame@f9023000 {
354				frame-number = <1>;
355				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
356				reg = <0xf9023000 0x1000>;
357				status = "disabled";
358			};
359
360			frame@f9024000 {
361				frame-number = <2>;
362				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
363				reg = <0xf9024000 0x1000>;
364				status = "disabled";
365			};
366
367			frame@f9025000 {
368				frame-number = <3>;
369				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
370				reg = <0xf9025000 0x1000>;
371				status = "disabled";
372			};
373
374			frame@f9026000 {
375				frame-number = <4>;
376				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
377				reg = <0xf9026000 0x1000>;
378				status = "disabled";
379			};
380
381			frame@f9027000 {
382				frame-number = <5>;
383				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
384				reg = <0xf9027000 0x1000>;
385				status = "disabled";
386			};
387
388			frame@f9028000 {
389				frame-number = <6>;
390				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
391				reg = <0xf9028000 0x1000>;
392				status = "disabled";
393			};
394		};
395
396		saw0: power-controller@f9089000 {
397			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
398			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
399		};
400
401		saw1: power-controller@f9099000 {
402			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
403			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
404		};
405
406		saw2: power-controller@f90a9000 {
407			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
408			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
409		};
410
411		saw3: power-controller@f90b9000 {
412			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
413			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
414		};
415
416		saw_l2: power-controller@f9012000 {
417			compatible = "qcom,saw2";
418			reg = <0xf9012000 0x1000>;
419			regulator;
420		};
421
422		acc0: power-manager@f9088000 {
423			compatible = "qcom,kpss-acc-v2";
424			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
425		};
426
427		acc1: power-manager@f9098000 {
428			compatible = "qcom,kpss-acc-v2";
429			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
430		};
431
432		acc2: power-manager@f90a8000 {
433			compatible = "qcom,kpss-acc-v2";
434			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
435		};
436
437		acc3: power-manager@f90b8000 {
438			compatible = "qcom,kpss-acc-v2";
439			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
440		};
441
442		sdhc_1: mmc@f9824900 {
443			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
444			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
445			reg-names = "hc", "core";
446			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
447				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
448			interrupt-names = "hc_irq", "pwr_irq";
449			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
450				 <&gcc GCC_SDCC1_APPS_CLK>,
451				 <&xo_board>;
452			clock-names = "iface", "core", "xo";
453			bus-width = <8>;
454			non-removable;
455
456			status = "disabled";
457		};
458
459		sdhc_3: mmc@f9864900 {
460			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
461			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
462			reg-names = "hc", "core";
463			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
464				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
465			interrupt-names = "hc_irq", "pwr_irq";
466			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
467				 <&gcc GCC_SDCC3_APPS_CLK>,
468				 <&xo_board>;
469			clock-names = "iface", "core", "xo";
470			bus-width = <4>;
471
472			#address-cells = <1>;
473			#size-cells = <0>;
474
475			status = "disabled";
476		};
477
478		sdhc_2: mmc@f98a4900 {
479			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
480			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
481			reg-names = "hc", "core";
482			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
483				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
484			interrupt-names = "hc_irq", "pwr_irq";
485			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
486				 <&gcc GCC_SDCC2_APPS_CLK>,
487				 <&xo_board>;
488			clock-names = "iface", "core", "xo";
489			bus-width = <4>;
490
491			#address-cells = <1>;
492			#size-cells = <0>;
493
494			status = "disabled";
495		};
496
497		blsp1_uart1: serial@f991d000 {
498			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
499			reg = <0xf991d000 0x1000>;
500			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
501			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
502			clock-names = "core", "iface";
503			status = "disabled";
504		};
505
506		blsp1_uart2: serial@f991e000 {
507			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
508			reg = <0xf991e000 0x1000>;
509			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
510			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
511			clock-names = "core", "iface";
512			pinctrl-names = "default";
513			pinctrl-0 = <&blsp1_uart2_default>;
514			status = "disabled";
515		};
516
517		blsp1_i2c1: i2c@f9923000 {
518			status = "disabled";
519			compatible = "qcom,i2c-qup-v2.1.1";
520			reg = <0xf9923000 0x1000>;
521			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
522			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
523			clock-names = "core", "iface";
524			pinctrl-names = "default", "sleep";
525			pinctrl-0 = <&blsp1_i2c1_default>;
526			pinctrl-1 = <&blsp1_i2c1_sleep>;
527			#address-cells = <1>;
528			#size-cells = <0>;
529		};
530
531		blsp1_i2c2: i2c@f9924000 {
532			status = "disabled";
533			compatible = "qcom,i2c-qup-v2.1.1";
534			reg = <0xf9924000 0x1000>;
535			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
536			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
537			clock-names = "core", "iface";
538			pinctrl-names = "default", "sleep";
539			pinctrl-0 = <&blsp1_i2c2_default>;
540			pinctrl-1 = <&blsp1_i2c2_sleep>;
541			#address-cells = <1>;
542			#size-cells = <0>;
543		};
544
545		blsp1_i2c3: i2c@f9925000 {
546			status = "disabled";
547			compatible = "qcom,i2c-qup-v2.1.1";
548			reg = <0xf9925000 0x1000>;
549			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
550			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
551			clock-names = "core", "iface";
552			pinctrl-names = "default", "sleep";
553			pinctrl-0 = <&blsp1_i2c3_default>;
554			pinctrl-1 = <&blsp1_i2c3_sleep>;
555			#address-cells = <1>;
556			#size-cells = <0>;
557		};
558
559		blsp1_i2c6: i2c@f9928000 {
560			status = "disabled";
561			compatible = "qcom,i2c-qup-v2.1.1";
562			reg = <0xf9928000 0x1000>;
563			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
564			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
565			clock-names = "core", "iface";
566			pinctrl-names = "default", "sleep";
567			pinctrl-0 = <&blsp1_i2c6_default>;
568			pinctrl-1 = <&blsp1_i2c6_sleep>;
569			#address-cells = <1>;
570			#size-cells = <0>;
571		};
572
573		blsp2_dma: dma-controller@f9944000 {
574			compatible = "qcom,bam-v1.4.0";
575			reg = <0xf9944000 0x19000>;
576			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
577			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
578			clock-names = "bam_clk";
579			#dma-cells = <1>;
580			qcom,ee = <0>;
581		};
582
583		blsp2_uart1: serial@f995d000 {
584			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
585			reg = <0xf995d000 0x1000>;
586			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
587			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
588			clock-names = "core", "iface";
589			pinctrl-names = "default", "sleep";
590			pinctrl-0 = <&blsp2_uart1_default>;
591			pinctrl-1 = <&blsp2_uart1_sleep>;
592			status = "disabled";
593		};
594
595		blsp2_uart2: serial@f995e000 {
596			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
597			reg = <0xf995e000 0x1000>;
598			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
599			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
600			clock-names = "core", "iface";
601			status = "disabled";
602		};
603
604		blsp2_uart4: serial@f9960000 {
605			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
606			reg = <0xf9960000 0x1000>;
607			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
608			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
609			clock-names = "core", "iface";
610			pinctrl-names = "default";
611			pinctrl-0 = <&blsp2_uart4_default>;
612			status = "disabled";
613		};
614
615		blsp2_i2c2: i2c@f9964000 {
616			status = "disabled";
617			compatible = "qcom,i2c-qup-v2.1.1";
618			reg = <0xf9964000 0x1000>;
619			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
620			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
621			clock-names = "core", "iface";
622			pinctrl-names = "default", "sleep";
623			pinctrl-0 = <&blsp2_i2c2_default>;
624			pinctrl-1 = <&blsp2_i2c2_sleep>;
625			#address-cells = <1>;
626			#size-cells = <0>;
627		};
628
629		blsp2_i2c5: i2c@f9967000 {
630			status = "disabled";
631			compatible = "qcom,i2c-qup-v2.1.1";
632			reg = <0xf9967000 0x1000>;
633			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
634			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
635			clock-names = "core", "iface";
636			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
637			dma-names = "tx", "rx";
638			pinctrl-names = "default", "sleep";
639			pinctrl-0 = <&blsp2_i2c5_default>;
640			pinctrl-1 = <&blsp2_i2c5_sleep>;
641			#address-cells = <1>;
642			#size-cells = <0>;
643		};
644
645		blsp2_i2c6: i2c@f9968000 {
646			status = "disabled";
647			compatible = "qcom,i2c-qup-v2.1.1";
648			reg = <0xf9968000 0x1000>;
649			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
650			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
651			clock-names = "core", "iface";
652			pinctrl-names = "default", "sleep";
653			pinctrl-0 = <&blsp2_i2c6_default>;
654			pinctrl-1 = <&blsp2_i2c6_sleep>;
655			#address-cells = <1>;
656			#size-cells = <0>;
657		};
658
659		usb: usb@f9a55000 {
660			compatible = "qcom,ci-hdrc";
661			reg = <0xf9a55000 0x200>,
662			      <0xf9a55200 0x200>;
663			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
664			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
665				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
666			clock-names = "iface", "core";
667			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
668			assigned-clock-rates = <75000000>;
669			resets = <&gcc GCC_USB_HS_BCR>;
670			reset-names = "core";
671			phy_type = "ulpi";
672			dr_mode = "otg";
673			ahb-burst-config = <0>;
674			phy-names = "usb-phy";
675			status = "disabled";
676			#reset-cells = <1>;
677
678			ulpi {
679				usb_hs1_phy: phy-0 {
680					compatible = "qcom,usb-hs-phy-msm8974",
681						     "qcom,usb-hs-phy";
682					#phy-cells = <0>;
683					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
684					clock-names = "ref", "sleep";
685					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
686					reset-names = "phy", "por";
687					status = "disabled";
688				};
689
690				usb_hs2_phy: phy-1 {
691					compatible = "qcom,usb-hs-phy-msm8974",
692						     "qcom,usb-hs-phy";
693					#phy-cells = <0>;
694					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
695					clock-names = "ref", "sleep";
696					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
697					reset-names = "phy", "por";
698					status = "disabled";
699				};
700			};
701		};
702
703		rng@f9bff000 {
704			compatible = "qcom,prng";
705			reg = <0xf9bff000 0x200>;
706			clocks = <&gcc GCC_PRNG_AHB_CLK>;
707			clock-names = "core";
708		};
709
710		pronto: remoteproc@fb204000 {
711			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
712			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
713			reg-names = "ccu", "dxe", "pmu";
714
715			memory-region = <&wcnss_region>;
716
717			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
718					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
719					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
720					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
721					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
722			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
723
724			qcom,smem-states = <&wcnss_smp2p_out 0>;
725			qcom,smem-state-names = "stop";
726
727			status = "disabled";
728
729			iris {
730				compatible = "qcom,wcn3680";
731
732				clocks = <&rpmcc RPM_SMD_CXO_A2>;
733				clock-names = "xo";
734			};
735
736			smd-edge {
737				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
738
739				qcom,ipc = <&apcs 8 17>;
740				qcom,smd-edge = <6>;
741
742				wcnss {
743					compatible = "qcom,wcnss";
744					qcom,smd-channels = "WCNSS_CTRL";
745					status = "disabled";
746
747					qcom,mmio = <&pronto>;
748
749					bluetooth {
750						compatible = "qcom,wcnss-bt";
751					};
752
753					wifi {
754						compatible = "qcom,wcnss-wlan";
755
756						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
757							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
758						interrupt-names = "tx", "rx";
759
760						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
761						qcom,smem-state-names = "tx-enable",
762									"tx-rings-empty";
763					};
764				};
765			};
766		};
767
768		sram@fc190000 {
769			compatible = "qcom,msm8974-rpm-stats";
770			reg = <0xfc190000 0x10000>;
771		};
772
773		etf@fc307000 {
774			compatible = "arm,coresight-tmc", "arm,primecell";
775			reg = <0xfc307000 0x1000>;
776
777			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
778			clock-names = "apb_pclk", "atclk";
779
780			out-ports {
781				port {
782					etf_out: endpoint {
783						remote-endpoint = <&replicator_in>;
784					};
785				};
786			};
787
788			in-ports {
789				port {
790					etf_in: endpoint {
791						remote-endpoint = <&merger_out>;
792					};
793				};
794			};
795		};
796
797		tpiu@fc318000 {
798			compatible = "arm,coresight-tpiu", "arm,primecell";
799			reg = <0xfc318000 0x1000>;
800
801			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
802			clock-names = "apb_pclk", "atclk";
803
804			in-ports {
805				port {
806					tpiu_in: endpoint {
807						remote-endpoint = <&replicator_out1>;
808					};
809				 };
810			};
811		};
812
813		funnel@fc31a000 {
814			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
815			reg = <0xfc31a000 0x1000>;
816
817			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
818			clock-names = "apb_pclk", "atclk";
819
820			in-ports {
821				#address-cells = <1>;
822				#size-cells = <0>;
823
824				/*
825				 * Not described input ports:
826				 * 0 - not-connected
827				 * 1 - connected trought funnel to Multimedia CPU
828				 * 2 - connected to Wireless CPU
829				 * 3 - not-connected
830				 * 4 - not-connected
831				 * 6 - not-connected
832				 * 7 - connected to STM
833				 */
834				port@5 {
835					reg = <5>;
836					funnel1_in5: endpoint {
837						remote-endpoint = <&kpss_out>;
838					};
839				};
840			};
841
842			out-ports {
843				port {
844					funnel1_out: endpoint {
845						remote-endpoint = <&merger_in1>;
846					};
847				};
848			};
849		};
850
851		funnel@fc31b000 {
852			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
853			reg = <0xfc31b000 0x1000>;
854
855			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
856			clock-names = "apb_pclk", "atclk";
857
858			in-ports {
859				#address-cells = <1>;
860				#size-cells = <0>;
861
862				/*
863				 * Not described input ports:
864				 * 0 - connected trought funnel to Audio, Modem and
865				 *     Resource and Power Manager CPU's
866				 * 2...7 - not-connected
867				 */
868				port@1 {
869					reg = <1>;
870					merger_in1: endpoint {
871						remote-endpoint = <&funnel1_out>;
872					};
873				};
874			};
875
876			out-ports {
877				port {
878					merger_out: endpoint {
879						remote-endpoint = <&etf_in>;
880					};
881				};
882			};
883		};
884
885		replicator@fc31c000 {
886			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
887			reg = <0xfc31c000 0x1000>;
888
889			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
890			clock-names = "apb_pclk", "atclk";
891
892			out-ports {
893				#address-cells = <1>;
894				#size-cells = <0>;
895
896				port@0 {
897					reg = <0>;
898					replicator_out0: endpoint {
899						remote-endpoint = <&etr_in>;
900					};
901				};
902				port@1 {
903					reg = <1>;
904					replicator_out1: endpoint {
905						remote-endpoint = <&tpiu_in>;
906					};
907				};
908			};
909
910			in-ports {
911				port {
912					replicator_in: endpoint {
913						remote-endpoint = <&etf_out>;
914					};
915				};
916			};
917		};
918
919		etr@fc322000 {
920			compatible = "arm,coresight-tmc", "arm,primecell";
921			reg = <0xfc322000 0x1000>;
922
923			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
924			clock-names = "apb_pclk", "atclk";
925
926			in-ports {
927				port {
928					etr_in: endpoint {
929						remote-endpoint = <&replicator_out0>;
930					};
931				};
932			};
933		};
934
935		etm@fc33c000 {
936			compatible = "arm,coresight-etm4x", "arm,primecell";
937			reg = <0xfc33c000 0x1000>;
938
939			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
940			clock-names = "apb_pclk", "atclk";
941
942			cpu = <&CPU0>;
943
944			out-ports {
945				port {
946					etm0_out: endpoint {
947						remote-endpoint = <&kpss_in0>;
948					};
949				};
950			};
951		};
952
953		etm@fc33d000 {
954			compatible = "arm,coresight-etm4x", "arm,primecell";
955			reg = <0xfc33d000 0x1000>;
956
957			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
958			clock-names = "apb_pclk", "atclk";
959
960			cpu = <&CPU1>;
961
962			out-ports {
963				port {
964					etm1_out: endpoint {
965						remote-endpoint = <&kpss_in1>;
966					};
967				};
968			};
969		};
970
971		etm@fc33e000 {
972			compatible = "arm,coresight-etm4x", "arm,primecell";
973			reg = <0xfc33e000 0x1000>;
974
975			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
976			clock-names = "apb_pclk", "atclk";
977
978			cpu = <&CPU2>;
979
980			out-ports {
981				port {
982					etm2_out: endpoint {
983						remote-endpoint = <&kpss_in2>;
984					};
985				};
986			};
987		};
988
989		etm@fc33f000 {
990			compatible = "arm,coresight-etm4x", "arm,primecell";
991			reg = <0xfc33f000 0x1000>;
992
993			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
994			clock-names = "apb_pclk", "atclk";
995
996			cpu = <&CPU3>;
997
998			out-ports {
999				port {
1000					etm3_out: endpoint {
1001						remote-endpoint = <&kpss_in3>;
1002					};
1003				};
1004			};
1005		};
1006
1007		/* KPSS funnel, only 4 inputs are used */
1008		funnel@fc345000 {
1009			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1010			reg = <0xfc345000 0x1000>;
1011
1012			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1013			clock-names = "apb_pclk", "atclk";
1014
1015			in-ports {
1016				#address-cells = <1>;
1017				#size-cells = <0>;
1018
1019				port@0 {
1020					reg = <0>;
1021					kpss_in0: endpoint {
1022						remote-endpoint = <&etm0_out>;
1023					};
1024				};
1025				port@1 {
1026					reg = <1>;
1027					kpss_in1: endpoint {
1028						remote-endpoint = <&etm1_out>;
1029					};
1030				};
1031				port@2 {
1032					reg = <2>;
1033					kpss_in2: endpoint {
1034						remote-endpoint = <&etm2_out>;
1035					};
1036				};
1037				port@3 {
1038					reg = <3>;
1039					kpss_in3: endpoint {
1040						remote-endpoint = <&etm3_out>;
1041					};
1042				};
1043			};
1044
1045			out-ports {
1046				port {
1047					kpss_out: endpoint {
1048						remote-endpoint = <&funnel1_in5>;
1049					};
1050				};
1051			};
1052		};
1053
1054		gcc: clock-controller@fc400000 {
1055			compatible = "qcom,gcc-msm8974";
1056			#clock-cells = <1>;
1057			#reset-cells = <1>;
1058			#power-domain-cells = <1>;
1059			reg = <0xfc400000 0x4000>;
1060
1061			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1062				 <&sleep_clk>;
1063			clock-names = "xo",
1064				      "sleep_clk";
1065		};
1066
1067		rpm_msg_ram: sram@fc428000 {
1068			compatible = "qcom,rpm-msg-ram";
1069			reg = <0xfc428000 0x4000>;
1070		};
1071
1072		bimc: interconnect@fc380000 {
1073			reg = <0xfc380000 0x6a000>;
1074			compatible = "qcom,msm8974-bimc";
1075			#interconnect-cells = <1>;
1076			clock-names = "bus", "bus_a";
1077			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
1078			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
1079		};
1080
1081		snoc: interconnect@fc460000 {
1082			reg = <0xfc460000 0x4000>;
1083			compatible = "qcom,msm8974-snoc";
1084			#interconnect-cells = <1>;
1085			clock-names = "bus", "bus_a";
1086			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
1087			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
1088		};
1089
1090		pnoc: interconnect@fc468000 {
1091			reg = <0xfc468000 0x4000>;
1092			compatible = "qcom,msm8974-pnoc";
1093			#interconnect-cells = <1>;
1094			clock-names = "bus", "bus_a";
1095			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
1096			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
1097		};
1098
1099		ocmemnoc: interconnect@fc470000 {
1100			reg = <0xfc470000 0x4000>;
1101			compatible = "qcom,msm8974-ocmemnoc";
1102			#interconnect-cells = <1>;
1103			clock-names = "bus", "bus_a";
1104			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1105			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
1106		};
1107
1108		mmssnoc: interconnect@fc478000 {
1109			reg = <0xfc478000 0x4000>;
1110			compatible = "qcom,msm8974-mmssnoc";
1111			#interconnect-cells = <1>;
1112			clock-names = "bus", "bus_a";
1113			clocks = <&mmcc MMSS_S0_AXI_CLK>,
1114			         <&mmcc MMSS_S0_AXI_CLK>;
1115		};
1116
1117		cnoc: interconnect@fc480000 {
1118			reg = <0xfc480000 0x4000>;
1119			compatible = "qcom,msm8974-cnoc";
1120			#interconnect-cells = <1>;
1121			clock-names = "bus", "bus_a";
1122			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
1123			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
1124		};
1125
1126		tsens: thermal-sensor@fc4a9000 {
1127			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
1128			reg = <0xfc4a9000 0x1000>, /* TM */
1129			      <0xfc4a8000 0x1000>; /* SROT */
1130			nvmem-cells = <&tsens_mode>,
1131				      <&tsens_base1>, <&tsens_base2>,
1132				      <&tsens_use_backup>,
1133				      <&tsens_mode_backup>,
1134				      <&tsens_base1_backup>, <&tsens_base2_backup>,
1135				      <&tsens_s0_p1>, <&tsens_s0_p2>,
1136				      <&tsens_s1_p1>, <&tsens_s1_p2>,
1137				      <&tsens_s2_p1>, <&tsens_s2_p2>,
1138				      <&tsens_s3_p1>, <&tsens_s3_p2>,
1139				      <&tsens_s4_p1>, <&tsens_s4_p2>,
1140				      <&tsens_s5_p1>, <&tsens_s5_p2>,
1141				      <&tsens_s6_p1>, <&tsens_s6_p2>,
1142				      <&tsens_s7_p1>, <&tsens_s7_p2>,
1143				      <&tsens_s8_p1>, <&tsens_s8_p2>,
1144				      <&tsens_s9_p1>, <&tsens_s9_p2>,
1145				      <&tsens_s10_p1>, <&tsens_s10_p2>,
1146				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
1147				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
1148				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
1149				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
1150				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
1151				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
1152				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
1153				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
1154				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
1155				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
1156				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
1157			nvmem-cell-names = "mode",
1158					   "base1", "base2",
1159					   "use_backup",
1160					   "mode_backup",
1161					   "base1_backup", "base2_backup",
1162					   "s0_p1", "s0_p2",
1163					   "s1_p1", "s1_p2",
1164					   "s2_p1", "s2_p2",
1165					   "s3_p1", "s3_p2",
1166					   "s4_p1", "s4_p2",
1167					   "s5_p1", "s5_p2",
1168					   "s6_p1", "s6_p2",
1169					   "s7_p1", "s7_p2",
1170					   "s8_p1", "s8_p2",
1171					   "s9_p1", "s9_p2",
1172					   "s10_p1", "s10_p2",
1173					   "s0_p1_backup", "s0_p2_backup",
1174					   "s1_p1_backup", "s1_p2_backup",
1175					   "s2_p1_backup", "s2_p2_backup",
1176					   "s3_p1_backup", "s3_p2_backup",
1177					   "s4_p1_backup", "s4_p2_backup",
1178					   "s5_p1_backup", "s5_p2_backup",
1179					   "s6_p1_backup", "s6_p2_backup",
1180					   "s7_p1_backup", "s7_p2_backup",
1181					   "s8_p1_backup", "s8_p2_backup",
1182					   "s9_p1_backup", "s9_p2_backup",
1183					   "s10_p1_backup", "s10_p2_backup";
1184			#qcom,sensors = <11>;
1185			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
1186			interrupt-names = "uplow";
1187			#thermal-sensor-cells = <1>;
1188		};
1189
1190		restart@fc4ab000 {
1191			compatible = "qcom,pshold";
1192			reg = <0xfc4ab000 0x4>;
1193		};
1194
1195		qfprom: qfprom@fc4bc000 {
1196			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
1197			reg = <0xfc4bc000 0x1000>;
1198			#address-cells = <1>;
1199			#size-cells = <1>;
1200
1201			tsens_base1: base1@d0 {
1202				reg = <0xd0 0x1>;
1203				bits = <0 8>;
1204			};
1205
1206			tsens_s0_p1: s0-p1@d1 {
1207				reg = <0xd1 0x1>;
1208				bits = <0 6>;
1209			};
1210
1211			tsens_s1_p1: s1-p1@d2 {
1212				reg = <0xd1 0x2>;
1213				bits = <6 6>;
1214			};
1215
1216			tsens_s2_p1: s2-p1@d2 {
1217				reg = <0xd2 0x2>;
1218				bits = <4 6>;
1219			};
1220
1221			tsens_s3_p1: s3-p1@d3 {
1222				reg = <0xd3 0x1>;
1223				bits = <2 6>;
1224			};
1225
1226			tsens_s4_p1: s4-p1@d4 {
1227				reg = <0xd4 0x1>;
1228				bits = <0 6>;
1229			};
1230
1231			tsens_s5_p1: s5-p1@d4 {
1232				reg = <0xd4 0x2>;
1233				bits = <6 6>;
1234			};
1235
1236			tsens_s6_p1: s6-p1@d5 {
1237				reg = <0xd5 0x2>;
1238				bits = <4 6>;
1239			};
1240
1241			tsens_s7_p1: s7-p1@d6 {
1242				reg = <0xd6 0x1>;
1243				bits = <2 6>;
1244			};
1245
1246			tsens_s8_p1: s8-p1@d7 {
1247				reg = <0xd7 0x1>;
1248				bits = <0 6>;
1249			};
1250
1251			tsens_mode: mode@d7 {
1252				reg = <0xd7 0x1>;
1253				bits = <6 2>;
1254			};
1255
1256			tsens_s9_p1: s9-p1@d8 {
1257				reg = <0xd8 0x1>;
1258				bits = <0 6>;
1259			};
1260
1261			tsens_s10_p1: s10_p1@d8 {
1262				reg = <0xd8 0x2>;
1263				bits = <6 6>;
1264			};
1265
1266			tsens_base2: base2@d9 {
1267				reg = <0xd9 0x2>;
1268				bits = <4 8>;
1269			};
1270
1271			tsens_s0_p2: s0-p2@da {
1272				reg = <0xda 0x2>;
1273				bits = <4 6>;
1274			};
1275
1276			tsens_s1_p2: s1-p2@db {
1277				reg = <0xdb 0x1>;
1278				bits = <2 6>;
1279			};
1280
1281			tsens_s2_p2: s2-p2@dc {
1282				reg = <0xdc 0x1>;
1283				bits = <0 6>;
1284			};
1285
1286			tsens_s3_p2: s3-p2@dc {
1287				reg = <0xdc 0x2>;
1288				bits = <6 6>;
1289			};
1290
1291			tsens_s4_p2: s4-p2@dd {
1292				reg = <0xdd 0x2>;
1293				bits = <4 6>;
1294			};
1295
1296			tsens_s5_p2: s5-p2@de {
1297				reg = <0xde 0x2>;
1298				bits = <2 6>;
1299			};
1300
1301			tsens_s6_p2: s6-p2@df {
1302				reg = <0xdf 0x1>;
1303				bits = <0 6>;
1304			};
1305
1306			tsens_s7_p2: s7-p2@e0 {
1307				reg = <0xe0 0x1>;
1308				bits = <0 6>;
1309			};
1310
1311			tsens_s8_p2: s8-p2@e0 {
1312				reg = <0xe0 0x2>;
1313				bits = <6 6>;
1314			};
1315
1316			tsens_s9_p2: s9-p2@e1 {
1317				reg = <0xe1 0x2>;
1318				bits = <4 6>;
1319			};
1320
1321			tsens_s10_p2: s10_p2@e2 {
1322				reg = <0xe2 0x2>;
1323				bits = <2 6>;
1324			};
1325
1326			tsens_s5_p2_backup: s5-p2_backup@e3 {
1327				reg = <0xe3 0x2>;
1328				bits = <0 6>;
1329			};
1330
1331			tsens_mode_backup: mode_backup@e3 {
1332				reg = <0xe3 0x1>;
1333				bits = <6 2>;
1334			};
1335
1336			tsens_s6_p2_backup: s6-p2_backup@e4 {
1337				reg = <0xe4 0x1>;
1338				bits = <0 6>;
1339			};
1340
1341			tsens_s7_p2_backup: s7-p2_backup@e4 {
1342				reg = <0xe4 0x2>;
1343				bits = <6 6>;
1344			};
1345
1346			tsens_s8_p2_backup: s8-p2_backup@e5 {
1347				reg = <0xe5 0x2>;
1348				bits = <4 6>;
1349			};
1350
1351			tsens_s9_p2_backup: s9-p2_backup@e6 {
1352				reg = <0xe6 0x2>;
1353				bits = <2 6>;
1354			};
1355
1356			tsens_s10_p2_backup: s10_p2_backup@e7 {
1357				reg = <0xe7 0x1>;
1358				bits = <0 6>;
1359			};
1360
1361			tsens_base1_backup: base1_backup@440 {
1362				reg = <0x440 0x1>;
1363				bits = <0 8>;
1364			};
1365
1366			tsens_s0_p1_backup: s0-p1_backup@441 {
1367				reg = <0x441 0x1>;
1368				bits = <0 6>;
1369			};
1370
1371			tsens_s1_p1_backup: s1-p1_backup@442 {
1372				reg = <0x441 0x2>;
1373				bits = <6 6>;
1374			};
1375
1376			tsens_s2_p1_backup: s2-p1_backup@442 {
1377				reg = <0x442 0x2>;
1378				bits = <4 6>;
1379			};
1380
1381			tsens_s3_p1_backup: s3-p1_backup@443 {
1382				reg = <0x443 0x1>;
1383				bits = <2 6>;
1384			};
1385
1386			tsens_s4_p1_backup: s4-p1_backup@444 {
1387				reg = <0x444 0x1>;
1388				bits = <0 6>;
1389			};
1390
1391			tsens_s5_p1_backup: s5-p1_backup@444 {
1392				reg = <0x444 0x2>;
1393				bits = <6 6>;
1394			};
1395
1396			tsens_s6_p1_backup: s6-p1_backup@445 {
1397				reg = <0x445 0x2>;
1398				bits = <4 6>;
1399			};
1400
1401			tsens_s7_p1_backup: s7-p1_backup@446 {
1402				reg = <0x446 0x1>;
1403				bits = <2 6>;
1404			};
1405
1406			tsens_use_backup: use_backup@447 {
1407				reg = <0x447 0x1>;
1408				bits = <5 3>;
1409			};
1410
1411			tsens_s8_p1_backup: s8-p1_backup@448 {
1412				reg = <0x448 0x1>;
1413				bits = <0 6>;
1414			};
1415
1416			tsens_s9_p1_backup: s9-p1_backup@448 {
1417				reg = <0x448 0x2>;
1418				bits = <6 6>;
1419			};
1420
1421			tsens_s10_p1_backup: s10_p1_backup@449 {
1422				reg = <0x449 0x2>;
1423				bits = <4 6>;
1424			};
1425
1426			tsens_base2_backup: base2_backup@44a {
1427				reg = <0x44a 0x2>;
1428				bits = <2 8>;
1429			};
1430
1431			tsens_s0_p2_backup: s0-p2_backup@44b {
1432				reg = <0x44b 0x3>;
1433				bits = <2 6>;
1434			};
1435
1436			tsens_s1_p2_backup: s1-p2_backup@44c {
1437				reg = <0x44c 0x1>;
1438				bits = <0 6>;
1439			};
1440
1441			tsens_s2_p2_backup: s2-p2_backup@44c {
1442				reg = <0x44c 0x2>;
1443				bits = <6 6>;
1444			};
1445
1446			tsens_s3_p2_backup: s3-p2_backup@44d {
1447				reg = <0x44d 0x2>;
1448				bits = <4 6>;
1449			};
1450
1451			tsens_s4_p2_backup: s4-p2_backup@44e {
1452				reg = <0x44e 0x1>;
1453				bits = <2 6>;
1454			};
1455		};
1456
1457		spmi_bus: spmi@fc4cf000 {
1458			compatible = "qcom,spmi-pmic-arb";
1459			reg-names = "core", "intr", "cnfg";
1460			reg = <0xfc4cf000 0x1000>,
1461			      <0xfc4cb000 0x1000>,
1462			      <0xfc4ca000 0x1000>;
1463			interrupt-names = "periph_irq";
1464			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1465			qcom,ee = <0>;
1466			qcom,channel = <0>;
1467			#address-cells = <2>;
1468			#size-cells = <0>;
1469			interrupt-controller;
1470			#interrupt-cells = <4>;
1471		};
1472
1473		bam_dmux_dma: dma-controller@fc834000 {
1474			compatible = "qcom,bam-v1.4.0";
1475			reg = <0xfc834000 0x7000>;
1476			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1477			#dma-cells = <1>;
1478			qcom,ee = <0>;
1479
1480			num-channels = <6>;
1481			qcom,num-ees = <1>;
1482			qcom,powered-remotely;
1483		};
1484
1485		remoteproc_mss: remoteproc@fc880000 {
1486			compatible = "qcom,msm8974-mss-pil";
1487			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
1488			reg-names = "qdsp6", "rmb";
1489
1490			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
1491					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1492					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1493					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1494					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1495			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
1496
1497			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
1498				 <&gcc GCC_MSS_CFG_AHB_CLK>,
1499				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1500				 <&xo_board>;
1501			clock-names = "iface", "bus", "mem", "xo";
1502
1503			resets = <&gcc GCC_MSS_RESTART>;
1504			reset-names = "mss_restart";
1505
1506			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
1507
1508			qcom,smem-states = <&modem_smp2p_out 0>;
1509			qcom,smem-state-names = "stop";
1510
1511			status = "disabled";
1512
1513			mba {
1514				memory-region = <&mba_region>;
1515			};
1516
1517			mpss {
1518				memory-region = <&mpss_region>;
1519			};
1520
1521			bam_dmux: bam-dmux {
1522				compatible = "qcom,bam-dmux";
1523
1524				interrupt-parent = <&modem_smsm>;
1525				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
1526				interrupt-names = "pc", "pc-ack";
1527
1528				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
1529				qcom,smem-state-names = "pc", "pc-ack";
1530
1531				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
1532				dma-names = "tx", "rx";
1533			};
1534
1535			smd-edge {
1536				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
1537
1538				qcom,ipc = <&apcs 8 12>;
1539				qcom,smd-edge = <0>;
1540
1541				label = "modem";
1542			};
1543		};
1544
1545		tcsr_mutex: hwlock@fd484000 {
1546			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
1547			reg = <0xfd484000 0x2000>;
1548			#hwlock-cells = <1>;
1549		};
1550
1551		tcsr: syscon@fd4a0000 {
1552			compatible = "qcom,tcsr-msm8974", "syscon";
1553			reg = <0xfd4a0000 0x10000>;
1554		};
1555
1556		tlmm: pinctrl@fd510000 {
1557			compatible = "qcom,msm8974-pinctrl";
1558			reg = <0xfd510000 0x4000>;
1559			gpio-controller;
1560			gpio-ranges = <&tlmm 0 0 146>;
1561			#gpio-cells = <2>;
1562			interrupt-controller;
1563			#interrupt-cells = <2>;
1564			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1565
1566			sdc1_off: sdc1-off-state {
1567				clk-pins {
1568					pins = "sdc1_clk";
1569					bias-disable;
1570					drive-strength = <2>;
1571				};
1572
1573				cmd-pins {
1574					pins = "sdc1_cmd";
1575					bias-pull-up;
1576					drive-strength = <2>;
1577				};
1578
1579				data-pins {
1580					pins = "sdc1_data";
1581					bias-pull-up;
1582					drive-strength = <2>;
1583				};
1584			};
1585
1586			sdc2_off: sdc2-off-state {
1587				clk-pins {
1588					pins = "sdc2_clk";
1589					bias-disable;
1590					drive-strength = <2>;
1591				};
1592
1593				cmd-pins {
1594					pins = "sdc2_cmd";
1595					bias-pull-up;
1596					drive-strength = <2>;
1597				};
1598
1599				data-pins {
1600					pins = "sdc2_data";
1601					bias-pull-up;
1602					drive-strength = <2>;
1603				};
1604
1605				cd-pins {
1606					pins = "gpio54";
1607					function = "gpio";
1608					bias-disable;
1609					drive-strength = <2>;
1610				};
1611			};
1612
1613			blsp1_uart2_default: blsp1-uart2-default-state {
1614				rx-pins {
1615					pins = "gpio5";
1616					function = "blsp_uart2";
1617					drive-strength = <2>;
1618					bias-pull-up;
1619				};
1620
1621				tx-pins {
1622					pins = "gpio4";
1623					function = "blsp_uart2";
1624					drive-strength = <4>;
1625					bias-disable;
1626				};
1627			};
1628
1629			blsp2_uart1_default: blsp2-uart1-default-state {
1630				tx-rts-pins {
1631					pins = "gpio41", "gpio44";
1632					function = "blsp_uart7";
1633					drive-strength = <2>;
1634					bias-disable;
1635				};
1636
1637				rx-cts-pins {
1638					pins = "gpio42", "gpio43";
1639					function = "blsp_uart7";
1640					drive-strength = <2>;
1641					bias-pull-up;
1642				};
1643			};
1644
1645			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
1646				pins = "gpio41", "gpio42", "gpio43", "gpio44";
1647				function = "gpio";
1648				drive-strength = <2>;
1649				bias-pull-down;
1650			};
1651
1652			blsp2_uart4_default: blsp2-uart4-default-state {
1653				tx-rts-pins {
1654					pins = "gpio53", "gpio56";
1655					function = "blsp_uart10";
1656					drive-strength = <2>;
1657					bias-disable;
1658				};
1659
1660				rx-cts-pins {
1661					pins = "gpio54", "gpio55";
1662					function = "blsp_uart10";
1663					drive-strength = <2>;
1664					bias-pull-up;
1665				};
1666			};
1667
1668			blsp1_i2c1_default: blsp1-i2c1-default-state {
1669				pins = "gpio2", "gpio3";
1670				function = "blsp_i2c1";
1671				drive-strength = <2>;
1672				bias-disable;
1673			};
1674
1675			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
1676				pins = "gpio2", "gpio3";
1677				function = "blsp_i2c1";
1678				drive-strength = <2>;
1679				bias-pull-up;
1680			};
1681
1682			blsp1_i2c2_default: blsp1-i2c2-default-state {
1683				pins = "gpio6", "gpio7";
1684				function = "blsp_i2c2";
1685				drive-strength = <2>;
1686				bias-disable;
1687			};
1688
1689			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
1690				pins = "gpio6", "gpio7";
1691				function = "blsp_i2c2";
1692				drive-strength = <2>;
1693				bias-pull-up;
1694			};
1695
1696			blsp1_i2c3_default: blsp1-i2c3-default-state {
1697				pins = "gpio10", "gpio11";
1698				function = "blsp_i2c3";
1699				drive-strength = <2>;
1700				bias-disable;
1701			};
1702
1703			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
1704				pins = "gpio10", "gpio11";
1705				function = "blsp_i2c3";
1706				drive-strength = <2>;
1707				bias-pull-up;
1708			};
1709
1710			/* BLSP1_I2C4 info is missing */
1711
1712			/* BLSP1_I2C5 info is missing */
1713
1714			blsp1_i2c6_default: blsp1-i2c6-default-state {
1715				pins = "gpio29", "gpio30";
1716				function = "blsp_i2c6";
1717				drive-strength = <2>;
1718				bias-disable;
1719			};
1720
1721			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
1722				pins = "gpio29", "gpio30";
1723				function = "blsp_i2c6";
1724				drive-strength = <2>;
1725				bias-pull-up;
1726			};
1727			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
1728
1729			/* BLSP2_I2C1 info is missing */
1730
1731			blsp2_i2c2_default: blsp2-i2c2-default-state {
1732				pins = "gpio47", "gpio48";
1733				function = "blsp_i2c8";
1734				drive-strength = <2>;
1735				bias-disable;
1736			};
1737
1738			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
1739				pins = "gpio47", "gpio48";
1740				function = "blsp_i2c8";
1741				drive-strength = <2>;
1742				bias-pull-up;
1743			};
1744
1745			/* BLSP2_I2C3 info is missing */
1746
1747			/* BLSP2_I2C4 info is missing */
1748
1749			blsp2_i2c5_default: blsp2-i2c5-default-state {
1750				pins = "gpio83", "gpio84";
1751				function = "blsp_i2c11";
1752				drive-strength = <2>;
1753				bias-disable;
1754			};
1755
1756			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
1757				pins = "gpio83", "gpio84";
1758				function = "blsp_i2c11";
1759				drive-strength = <2>;
1760				bias-pull-up;
1761			};
1762
1763			blsp2_i2c6_default: blsp2-i2c6-default-state {
1764				pins = "gpio87", "gpio88";
1765				function = "blsp_i2c12";
1766				drive-strength = <2>;
1767				bias-disable;
1768			};
1769
1770			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
1771				pins = "gpio87", "gpio88";
1772				function = "blsp_i2c12";
1773				drive-strength = <2>;
1774				bias-pull-up;
1775			};
1776
1777			cci_default: cci-default-state {
1778				cci_i2c0_default: cci-i2c0-default-pins {
1779					pins = "gpio19", "gpio20";
1780					function = "cci_i2c0";
1781					drive-strength = <2>;
1782					bias-disable;
1783				};
1784
1785				cci_i2c1_default: cci-i2c1-default-pins {
1786					pins = "gpio21", "gpio22";
1787					function = "cci_i2c1";
1788					drive-strength = <2>;
1789					bias-disable;
1790				};
1791			};
1792
1793			cci_sleep: cci-sleep-state {
1794				cci_i2c0_sleep: cci-i2c0-sleep-pins {
1795					pins = "gpio19", "gpio20";
1796					function = "gpio";
1797					drive-strength = <2>;
1798					bias-disable;
1799				};
1800
1801				cci_i2c1_sleep: cci-i2c1-sleep-pins {
1802					pins = "gpio21", "gpio22";
1803					function = "gpio";
1804					drive-strength = <2>;
1805					bias-disable;
1806				};
1807			};
1808
1809			spi8_default: spi8_default-state {
1810				mosi-pins {
1811					pins = "gpio45";
1812					function = "blsp_spi8";
1813				};
1814				miso-pins {
1815					pins = "gpio46";
1816					function = "blsp_spi8";
1817				};
1818				cs-pins {
1819					pins = "gpio47";
1820					function = "blsp_spi8";
1821				};
1822				clk-pins {
1823					pins = "gpio48";
1824					function = "blsp_spi8";
1825				};
1826			};
1827		};
1828
1829		mmcc: clock-controller@fd8c0000 {
1830			compatible = "qcom,mmcc-msm8974";
1831			#clock-cells = <1>;
1832			#reset-cells = <1>;
1833			#power-domain-cells = <1>;
1834			reg = <0xfd8c0000 0x6000>;
1835			clocks = <&xo_board>,
1836				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
1837				 <&gcc GPLL0_VOTE>,
1838				 <&gcc GPLL1_VOTE>,
1839				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
1840				 <&mdss_dsi0_phy 1>,
1841				 <&mdss_dsi0_phy 0>,
1842				 <&mdss_dsi1_phy 1>,
1843				 <&mdss_dsi1_phy 0>,
1844				 <0>,
1845				 <0>,
1846				 <0>;
1847			clock-names = "xo",
1848				      "mmss_gpll0_vote",
1849				      "gpll0_vote",
1850				      "gpll1_vote",
1851				      "gfx3d_clk_src",
1852				      "dsi0pll",
1853				      "dsi0pllbyte",
1854				      "dsi1pll",
1855				      "dsi1pllbyte",
1856				      "hdmipll",
1857				      "edp_link_clk",
1858				      "edp_vco_div";
1859		};
1860
1861		mdss: display-subsystem@fd900000 {
1862			compatible = "qcom,mdss";
1863			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
1864			reg-names = "mdss_phys", "vbif_phys";
1865
1866			power-domains = <&mmcc MDSS_GDSC>;
1867
1868			clocks = <&mmcc MDSS_AHB_CLK>,
1869				 <&mmcc MDSS_AXI_CLK>,
1870				 <&mmcc MDSS_VSYNC_CLK>;
1871			clock-names = "iface", "bus", "vsync";
1872
1873			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1874
1875			interrupt-controller;
1876			#interrupt-cells = <1>;
1877
1878			status = "disabled";
1879
1880			#address-cells = <1>;
1881			#size-cells = <1>;
1882			ranges;
1883
1884			mdp: display-controller@fd900000 {
1885				compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
1886				reg = <0xfd900100 0x22000>;
1887				reg-names = "mdp_phys";
1888
1889				interrupt-parent = <&mdss>;
1890				interrupts = <0>;
1891
1892				clocks = <&mmcc MDSS_AHB_CLK>,
1893					 <&mmcc MDSS_AXI_CLK>,
1894					 <&mmcc MDSS_MDP_CLK>,
1895					 <&mmcc MDSS_VSYNC_CLK>;
1896				clock-names = "iface", "bus", "core", "vsync";
1897
1898				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
1899				interconnect-names = "mdp0-mem";
1900
1901				ports {
1902					#address-cells = <1>;
1903					#size-cells = <0>;
1904
1905					port@0 {
1906						reg = <0>;
1907						mdp5_intf1_out: endpoint {
1908							remote-endpoint = <&mdss_dsi0_in>;
1909						};
1910					};
1911
1912					port@1 {
1913						reg = <1>;
1914						mdp5_intf2_out: endpoint {
1915							remote-endpoint = <&mdss_dsi1_in>;
1916						};
1917					};
1918				};
1919			};
1920
1921			mdss_dsi0: dsi@fd922800 {
1922				compatible = "qcom,msm8974-dsi-ctrl",
1923					     "qcom,mdss-dsi-ctrl";
1924				reg = <0xfd922800 0x1f8>;
1925				reg-names = "dsi_ctrl";
1926
1927				interrupt-parent = <&mdss>;
1928				interrupts = <4>;
1929
1930				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
1931				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
1932
1933				clocks = <&mmcc MDSS_MDP_CLK>,
1934					 <&mmcc MDSS_AHB_CLK>,
1935					 <&mmcc MDSS_AXI_CLK>,
1936					 <&mmcc MDSS_BYTE0_CLK>,
1937					 <&mmcc MDSS_PCLK0_CLK>,
1938					 <&mmcc MDSS_ESC0_CLK>,
1939					 <&mmcc MMSS_MISC_AHB_CLK>;
1940				clock-names = "mdp_core",
1941					      "iface",
1942					      "bus",
1943					      "byte",
1944					      "pixel",
1945					      "core",
1946					      "core_mmss";
1947
1948				phys = <&mdss_dsi0_phy>;
1949
1950				status = "disabled";
1951
1952				#address-cells = <1>;
1953				#size-cells = <0>;
1954
1955				ports {
1956					#address-cells = <1>;
1957					#size-cells = <0>;
1958
1959					port@0 {
1960						reg = <0>;
1961						mdss_dsi0_in: endpoint {
1962							remote-endpoint = <&mdp5_intf1_out>;
1963						};
1964					};
1965
1966					port@1 {
1967						reg = <1>;
1968						mdss_dsi0_out: endpoint {
1969						};
1970					};
1971				};
1972			};
1973
1974			mdss_dsi0_phy: phy@fd922a00 {
1975				compatible = "qcom,dsi-phy-28nm-hpm";
1976				reg = <0xfd922a00 0xd4>,
1977				      <0xfd922b00 0x280>,
1978				      <0xfd922d80 0x30>;
1979				reg-names = "dsi_pll",
1980					    "dsi_phy",
1981					    "dsi_phy_regulator";
1982
1983				#clock-cells = <1>;
1984				#phy-cells = <0>;
1985
1986				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
1987				clock-names = "iface", "ref";
1988
1989				status = "disabled";
1990			};
1991
1992			mdss_dsi1: dsi@fd922e00 {
1993				compatible = "qcom,msm8974-dsi-ctrl",
1994					     "qcom,mdss-dsi-ctrl";
1995				reg = <0xfd922e00 0x1f8>;
1996				reg-names = "dsi_ctrl";
1997
1998				interrupt-parent = <&mdss>;
1999				interrupts = <4>;
2000
2001				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
2002				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
2003
2004				clocks = <&mmcc MDSS_MDP_CLK>,
2005					 <&mmcc MDSS_AHB_CLK>,
2006					 <&mmcc MDSS_AXI_CLK>,
2007					 <&mmcc MDSS_BYTE1_CLK>,
2008					 <&mmcc MDSS_PCLK1_CLK>,
2009					 <&mmcc MDSS_ESC1_CLK>,
2010					 <&mmcc MMSS_MISC_AHB_CLK>;
2011				clock-names = "mdp_core",
2012					      "iface",
2013					      "bus",
2014					      "byte",
2015					      "pixel",
2016					      "core",
2017					      "core_mmss";
2018
2019				phys = <&mdss_dsi1_phy>;
2020
2021				status = "disabled";
2022
2023				#address-cells = <1>;
2024				#size-cells = <0>;
2025
2026				ports {
2027					#address-cells = <1>;
2028					#size-cells = <0>;
2029
2030					port@0 {
2031						reg = <0>;
2032						mdss_dsi1_in: endpoint {
2033							remote-endpoint = <&mdp5_intf2_out>;
2034						};
2035					};
2036
2037					port@1 {
2038						reg = <1>;
2039						mdss_dsi1_out: endpoint {
2040						};
2041					};
2042				};
2043			};
2044
2045			mdss_dsi1_phy: phy@fd923000 {
2046				compatible = "qcom,dsi-phy-28nm-hpm";
2047				reg = <0xfd923000 0xd4>,
2048				      <0xfd923100 0x280>,
2049				      <0xfd923380 0x30>;
2050				reg-names = "dsi_pll",
2051					    "dsi_phy",
2052					    "dsi_phy_regulator";
2053
2054				#clock-cells = <1>;
2055				#phy-cells = <0>;
2056
2057				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
2058				clock-names = "iface", "ref";
2059
2060				status = "disabled";
2061			};
2062		};
2063
2064		cci: cci@fda0c000 {
2065			compatible = "qcom,msm8974-cci";
2066			#address-cells = <1>;
2067			#size-cells = <0>;
2068			reg = <0xfda0c000 0x1000>;
2069			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
2070			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
2071				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
2072				 <&mmcc CAMSS_CCI_CCI_CLK>;
2073			clock-names = "camss_top_ahb",
2074				      "cci_ahb",
2075				      "cci";
2076
2077			pinctrl-names = "default", "sleep";
2078			pinctrl-0 = <&cci_default>;
2079			pinctrl-1 = <&cci_sleep>;
2080
2081			status = "disabled";
2082
2083			cci_i2c0: i2c-bus@0 {
2084				reg = <0>;
2085				clock-frequency = <100000>;
2086				#address-cells = <1>;
2087				#size-cells = <0>;
2088			};
2089
2090			cci_i2c1: i2c-bus@1 {
2091				reg = <1>;
2092				clock-frequency = <100000>;
2093				#address-cells = <1>;
2094				#size-cells = <0>;
2095			};
2096		};
2097
2098		gpu: adreno@fdb00000 {
2099			compatible = "qcom,adreno-330.1", "qcom,adreno";
2100			reg = <0xfdb00000 0x10000>;
2101			reg-names = "kgsl_3d0_reg_memory";
2102
2103			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
2104			interrupt-names = "kgsl_3d0_irq";
2105
2106			clocks = <&mmcc OXILI_GFX3D_CLK>,
2107				 <&mmcc OXILICX_AHB_CLK>,
2108				 <&mmcc OXILICX_AXI_CLK>;
2109			clock-names = "core", "iface", "mem_iface";
2110
2111			sram = <&gmu_sram>;
2112			power-domains = <&mmcc OXILICX_GDSC>;
2113			operating-points-v2 = <&gpu_opp_table>;
2114
2115			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
2116					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
2117			interconnect-names = "gfx-mem", "ocmem";
2118
2119			// iommus = <&gpu_iommu 0>;
2120
2121			status = "disabled";
2122
2123			gpu_opp_table: opp-table {
2124				compatible = "operating-points-v2";
2125
2126				opp-320000000 {
2127					opp-hz = /bits/ 64 <320000000>;
2128				};
2129
2130				opp-200000000 {
2131					opp-hz = /bits/ 64 <200000000>;
2132				};
2133
2134				opp-27000000 {
2135					opp-hz = /bits/ 64 <27000000>;
2136				};
2137			};
2138		};
2139
2140		sram@fdd00000 {
2141			compatible = "qcom,msm8974-ocmem";
2142			reg = <0xfdd00000 0x2000>,
2143			      <0xfec00000 0x180000>;
2144			reg-names = "ctrl", "mem";
2145			ranges = <0 0xfec00000 0x180000>;
2146			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
2147				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
2148			clock-names = "core", "iface";
2149
2150			#address-cells = <1>;
2151			#size-cells = <1>;
2152
2153			gmu_sram: gmu-sram@0 {
2154				reg = <0x0 0x100000>;
2155			};
2156		};
2157
2158		remoteproc_adsp: remoteproc@fe200000 {
2159			compatible = "qcom,msm8974-adsp-pil";
2160			reg = <0xfe200000 0x100>;
2161
2162			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
2163					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2164					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2165					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2166					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
2167			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
2168
2169			clocks = <&xo_board>;
2170			clock-names = "xo";
2171
2172			memory-region = <&adsp_region>;
2173
2174			qcom,smem-states = <&adsp_smp2p_out 0>;
2175			qcom,smem-state-names = "stop";
2176
2177			status = "disabled";
2178
2179			smd-edge {
2180				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
2181
2182				qcom,ipc = <&apcs 8 8>;
2183				qcom,smd-edge = <1>;
2184				label = "lpass";
2185			};
2186		};
2187
2188		imem: sram@fe805000 {
2189			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
2190			reg = <0xfe805000 0x1000>;
2191
2192			reboot-mode {
2193				compatible = "syscon-reboot-mode";
2194				offset = <0x65c>;
2195			};
2196		};
2197	};
2198
2199	thermal-zones {
2200		cpu0-thermal {
2201			polling-delay-passive = <250>;
2202			polling-delay = <1000>;
2203
2204			thermal-sensors = <&tsens 5>;
2205
2206			trips {
2207				cpu_alert0: trip0 {
2208					temperature = <75000>;
2209					hysteresis = <2000>;
2210					type = "passive";
2211				};
2212				cpu_crit0: trip1 {
2213					temperature = <110000>;
2214					hysteresis = <2000>;
2215					type = "critical";
2216				};
2217			};
2218		};
2219
2220		cpu1-thermal {
2221			polling-delay-passive = <250>;
2222			polling-delay = <1000>;
2223
2224			thermal-sensors = <&tsens 6>;
2225
2226			trips {
2227				cpu_alert1: trip0 {
2228					temperature = <75000>;
2229					hysteresis = <2000>;
2230					type = "passive";
2231				};
2232				cpu_crit1: trip1 {
2233					temperature = <110000>;
2234					hysteresis = <2000>;
2235					type = "critical";
2236				};
2237			};
2238		};
2239
2240		cpu2-thermal {
2241			polling-delay-passive = <250>;
2242			polling-delay = <1000>;
2243
2244			thermal-sensors = <&tsens 7>;
2245
2246			trips {
2247				cpu_alert2: trip0 {
2248					temperature = <75000>;
2249					hysteresis = <2000>;
2250					type = "passive";
2251				};
2252				cpu_crit2: trip1 {
2253					temperature = <110000>;
2254					hysteresis = <2000>;
2255					type = "critical";
2256				};
2257			};
2258		};
2259
2260		cpu3-thermal {
2261			polling-delay-passive = <250>;
2262			polling-delay = <1000>;
2263
2264			thermal-sensors = <&tsens 8>;
2265
2266			trips {
2267				cpu_alert3: trip0 {
2268					temperature = <75000>;
2269					hysteresis = <2000>;
2270					type = "passive";
2271				};
2272				cpu_crit3: trip1 {
2273					temperature = <110000>;
2274					hysteresis = <2000>;
2275					type = "critical";
2276				};
2277			};
2278		};
2279
2280		q6-dsp-thermal {
2281			polling-delay-passive = <250>;
2282			polling-delay = <1000>;
2283
2284			thermal-sensors = <&tsens 1>;
2285
2286			trips {
2287				q6_dsp_alert0: trip-point0 {
2288					temperature = <90000>;
2289					hysteresis = <2000>;
2290					type = "hot";
2291				};
2292			};
2293		};
2294
2295		modemtx-thermal {
2296			polling-delay-passive = <250>;
2297			polling-delay = <1000>;
2298
2299			thermal-sensors = <&tsens 2>;
2300
2301			trips {
2302				modemtx_alert0: trip-point0 {
2303					temperature = <90000>;
2304					hysteresis = <2000>;
2305					type = "hot";
2306				};
2307			};
2308		};
2309
2310		video-thermal {
2311			polling-delay-passive = <250>;
2312			polling-delay = <1000>;
2313
2314			thermal-sensors = <&tsens 3>;
2315
2316			trips {
2317				video_alert0: trip-point0 {
2318					temperature = <95000>;
2319					hysteresis = <2000>;
2320					type = "hot";
2321				};
2322			};
2323		};
2324
2325		wlan-thermal {
2326			polling-delay-passive = <250>;
2327			polling-delay = <1000>;
2328
2329			thermal-sensors = <&tsens 4>;
2330
2331			trips {
2332				wlan_alert0: trip-point0 {
2333					temperature = <105000>;
2334					hysteresis = <2000>;
2335					type = "hot";
2336				};
2337			};
2338		};
2339
2340		gpu-top-thermal {
2341			polling-delay-passive = <250>;
2342			polling-delay = <1000>;
2343
2344			thermal-sensors = <&tsens 9>;
2345
2346			trips {
2347				gpu1_alert0: trip-point0 {
2348					temperature = <90000>;
2349					hysteresis = <2000>;
2350					type = "hot";
2351				};
2352			};
2353		};
2354
2355		gpu-bottom-thermal {
2356			polling-delay-passive = <250>;
2357			polling-delay = <1000>;
2358
2359			thermal-sensors = <&tsens 10>;
2360
2361			trips {
2362				gpu2_alert0: trip-point0 {
2363					temperature = <90000>;
2364					hysteresis = <2000>;
2365					type = "hot";
2366				};
2367			};
2368		};
2369	};
2370
2371	timer {
2372		compatible = "arm,armv7-timer";
2373		interrupts = <GIC_PPI 2 0xf08>,
2374			     <GIC_PPI 3 0xf08>,
2375			     <GIC_PPI 4 0xf08>,
2376			     <GIC_PPI 1 0xf08>;
2377		clock-frequency = <19200000>;
2378	};
2379
2380	vreg_boost: vreg-boost {
2381		compatible = "regulator-fixed";
2382
2383		regulator-name = "vreg-boost";
2384		regulator-min-microvolt = <3150000>;
2385		regulator-max-microvolt = <3150000>;
2386
2387		regulator-always-on;
2388		regulator-boot-on;
2389
2390		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
2391		enable-active-high;
2392
2393		pinctrl-names = "default";
2394		pinctrl-0 = <&boost_bypass_n_pin>;
2395	};
2396
2397	vreg_vph_pwr: vreg-vph-pwr {
2398		compatible = "regulator-fixed";
2399		regulator-name = "vph-pwr";
2400
2401		regulator-min-microvolt = <3600000>;
2402		regulator-max-microvolt = <3600000>;
2403
2404		regulator-always-on;
2405	};
2406};
2407