1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interrupt-controller/arm-gic.h>
5#include <dt-bindings/clock/qcom,gcc-msm8960.h>
6#include <dt-bindings/reset/qcom,gcc-msm8960.h>
7#include <dt-bindings/clock/qcom,lcc-msm8960.h>
8#include <dt-bindings/mfd/qcom-rpm.h>
9#include <dt-bindings/soc/qcom,gsbi.h>
10
11/ {
12	#address-cells = <1>;
13	#size-cells = <1>;
14	model = "Qualcomm MSM8960";
15	compatible = "qcom,msm8960";
16	interrupt-parent = <&intc>;
17
18	cpus {
19		#address-cells = <1>;
20		#size-cells = <0>;
21		interrupts = <GIC_PPI 14 0x304>;
22
23		cpu@0 {
24			compatible = "qcom,krait";
25			enable-method = "qcom,kpss-acc-v1";
26			device_type = "cpu";
27			reg = <0>;
28			next-level-cache = <&L2>;
29			qcom,acc = <&acc0>;
30			qcom,saw = <&saw0>;
31		};
32
33		cpu@1 {
34			compatible = "qcom,krait";
35			enable-method = "qcom,kpss-acc-v1";
36			device_type = "cpu";
37			reg = <1>;
38			next-level-cache = <&L2>;
39			qcom,acc = <&acc1>;
40			qcom,saw = <&saw1>;
41		};
42
43		L2: l2-cache {
44			compatible = "cache";
45			cache-level = <2>;
46			cache-unified;
47		};
48	};
49
50	memory {
51		device_type = "memory";
52		reg = <0x0 0x0>;
53	};
54
55	cpu-pmu {
56		compatible = "qcom,krait-pmu";
57		interrupts = <GIC_PPI 10 0x304>;
58		qcom,no-pc-write;
59	};
60
61	clocks {
62		cxo_board: cxo_board {
63			compatible = "fixed-clock";
64			#clock-cells = <0>;
65			clock-frequency = <19200000>;
66			clock-output-names = "cxo_board";
67		};
68
69		pxo_board: pxo_board {
70			compatible = "fixed-clock";
71			#clock-cells = <0>;
72			clock-frequency = <27000000>;
73			clock-output-names = "pxo_board";
74		};
75
76		sleep_clk: sleep_clk {
77			compatible = "fixed-clock";
78			#clock-cells = <0>;
79			clock-frequency = <32768>;
80			clock-output-names = "sleep_clk";
81		};
82	};
83
84	/* Temporary fixed regulator */
85	vsdcc_fixed: vsdcc-regulator {
86		compatible = "regulator-fixed";
87		regulator-name = "SDCC Power";
88		regulator-min-microvolt = <2700000>;
89		regulator-max-microvolt = <2700000>;
90		regulator-always-on;
91	};
92
93	soc: soc {
94		#address-cells = <1>;
95		#size-cells = <1>;
96		ranges;
97		compatible = "simple-bus";
98
99		intc: interrupt-controller@2000000 {
100			compatible = "qcom,msm-qgic2";
101			interrupt-controller;
102			#interrupt-cells = <3>;
103			reg = <0x02000000 0x1000>,
104			      <0x02002000 0x1000>;
105		};
106
107		timer@200a000 {
108			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
109				     "qcom,msm-timer";
110			interrupts = <GIC_PPI 1 0x301>,
111				     <GIC_PPI 2 0x301>,
112				     <GIC_PPI 3 0x301>;
113			reg = <0x0200a000 0x100>;
114			clock-frequency = <27000000>;
115			cpu-offset = <0x80000>;
116		};
117
118		msmgpio: pinctrl@800000 {
119			compatible = "qcom,msm8960-pinctrl";
120			gpio-controller;
121			gpio-ranges = <&msmgpio 0 0 152>;
122			#gpio-cells = <2>;
123			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
124			interrupt-controller;
125			#interrupt-cells = <2>;
126			reg = <0x800000 0x4000>;
127		};
128
129		gcc: clock-controller@900000 {
130			compatible = "qcom,gcc-msm8960";
131			#clock-cells = <1>;
132			#power-domain-cells = <1>;
133			#reset-cells = <1>;
134			reg = <0x900000 0x4000>;
135			clocks = <&cxo_board>,
136				 <&pxo_board>,
137				 <&lcc PLL4>;
138			clock-names = "cxo", "pxo", "pll4";
139		};
140
141		lcc: clock-controller@28000000 {
142			compatible = "qcom,lcc-msm8960";
143			reg = <0x28000000 0x1000>;
144			#clock-cells = <1>;
145			#reset-cells = <1>;
146			clocks = <&pxo_board>,
147				 <&gcc PLL4_VOTE>,
148				 <0>,
149				 <0>, <0>,
150				 <0>, <0>,
151				 <0>;
152			clock-names = "pxo",
153				      "pll4_vote",
154				      "mi2s_codec_clk",
155				      "codec_i2s_mic_codec_clk",
156				      "spare_i2s_mic_codec_clk",
157				      "codec_i2s_spkr_codec_clk",
158				      "spare_i2s_spkr_codec_clk",
159				      "pcm_codec_clk";
160		};
161
162		clock-controller@4000000 {
163			compatible = "qcom,mmcc-msm8960";
164			reg = <0x4000000 0x1000>;
165			#clock-cells = <1>;
166			#power-domain-cells = <1>;
167			#reset-cells = <1>;
168			clocks = <&pxo_board>,
169				 <&gcc PLL3>,
170				 <&gcc PLL8_VOTE>,
171				 <0>,
172				 <0>,
173				 <0>,
174				 <0>,
175				 <0>;
176			clock-names = "pxo",
177				      "pll3",
178				      "pll8_vote",
179				      "dsi1pll",
180				      "dsi1pllbyte",
181				      "dsi2pll",
182				      "dsi2pllbyte",
183				      "hdmipll";
184		};
185
186		l2cc: clock-controller@2011000 {
187			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
188			reg = <0x2011000 0x1000>;
189			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
190			clock-names = "pll8_vote", "pxo";
191			#clock-cells = <0>;
192		};
193
194		rpm: rpm@108000 {
195			compatible = "qcom,rpm-msm8960";
196			reg = <0x108000 0x1000>;
197			qcom,ipc = <&l2cc 0x8 2>;
198
199			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
200				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
201				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
202			interrupt-names = "ack", "err", "wakeup";
203
204			regulators {
205				compatible = "qcom,rpm-pm8921-regulators";
206			};
207		};
208
209		acc0: clock-controller@2088000 {
210			compatible = "qcom,kpss-acc-v1";
211			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
212			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
213			clock-names = "pll8_vote", "pxo";
214			clock-output-names = "acpu0_aux";
215			#clock-cells = <0>;
216		};
217
218		acc1: clock-controller@2098000 {
219			compatible = "qcom,kpss-acc-v1";
220			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
221			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
222			clock-names = "pll8_vote", "pxo";
223			clock-output-names = "acpu1_aux";
224			#clock-cells = <0>;
225		};
226
227		saw0: regulator@2089000 {
228			compatible = "qcom,saw2";
229			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
230			regulator;
231		};
232
233		saw1: regulator@2099000 {
234			compatible = "qcom,saw2";
235			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
236			regulator;
237		};
238
239		gsbi5: gsbi@16400000 {
240			compatible = "qcom,gsbi-v1.0.0";
241			cell-index = <5>;
242			reg = <0x16400000 0x100>;
243			clocks = <&gcc GSBI5_H_CLK>;
244			clock-names = "iface";
245			#address-cells = <1>;
246			#size-cells = <1>;
247			ranges;
248
249			syscon-tcsr = <&tcsr>;
250
251			gsbi5_serial: serial@16440000 {
252				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
253				reg = <0x16440000 0x1000>,
254				      <0x16400000 0x1000>;
255				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
256				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
257				clock-names = "core", "iface";
258				status = "disabled";
259			};
260		};
261
262		ssbi@500000 {
263			compatible = "qcom,ssbi";
264			reg = <0x500000 0x1000>;
265			qcom,controller-type = "pmic-arbiter";
266
267			pmicintc: pmic {
268				compatible = "qcom,pm8921";
269				interrupt-parent = <&msmgpio>;
270				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
271				#interrupt-cells = <2>;
272				interrupt-controller;
273				#address-cells = <1>;
274				#size-cells = <0>;
275
276				pwrkey@1c {
277					compatible = "qcom,pm8921-pwrkey";
278					reg = <0x1c>;
279					interrupt-parent = <&pmicintc>;
280					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
281						     <51 IRQ_TYPE_EDGE_RISING>;
282					debounce = <15625>;
283					pull-up;
284				};
285
286				keypad@148 {
287					compatible = "qcom,pm8921-keypad";
288					reg = <0x148>;
289					interrupt-parent = <&pmicintc>;
290					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
291						     <75 IRQ_TYPE_EDGE_RISING>;
292					debounce = <15>;
293					scan-delay = <32>;
294					row-hold = <91500>;
295				};
296
297				rtc@11d {
298					compatible = "qcom,pm8921-rtc";
299					interrupt-parent = <&pmicintc>;
300					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
301					reg = <0x11d>;
302					allow-set-time;
303				};
304			};
305		};
306
307		rng@1a500000 {
308			compatible = "qcom,prng";
309			reg = <0x1a500000 0x200>;
310			clocks = <&gcc PRNG_CLK>;
311			clock-names = "core";
312		};
313
314		sdcc3: mmc@12180000 {
315			compatible = "arm,pl18x", "arm,primecell";
316			arm,primecell-periphid = <0x00051180>;
317			status = "disabled";
318			reg = <0x12180000 0x8000>;
319			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
320			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
321			clock-names = "mclk", "apb_pclk";
322			bus-width = <4>;
323			cap-sd-highspeed;
324			cap-mmc-highspeed;
325			max-frequency = <192000000>;
326			no-1-8-v;
327			vmmc-supply = <&vsdcc_fixed>;
328		};
329
330		sdcc1: mmc@12400000 {
331			status = "disabled";
332			compatible = "arm,pl18x", "arm,primecell";
333			arm,primecell-periphid = <0x00051180>;
334			reg = <0x12400000 0x8000>;
335			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
336			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
337			clock-names = "mclk", "apb_pclk";
338			bus-width = <8>;
339			max-frequency = <96000000>;
340			non-removable;
341			cap-sd-highspeed;
342			cap-mmc-highspeed;
343			vmmc-supply = <&vsdcc_fixed>;
344		};
345
346		tcsr: syscon@1a400000 {
347			compatible = "qcom,tcsr-msm8960", "syscon";
348			reg = <0x1a400000 0x100>;
349		};
350
351		gsbi1: gsbi@16000000 {
352			compatible = "qcom,gsbi-v1.0.0";
353			cell-index = <1>;
354			reg = <0x16000000 0x100>;
355			clocks = <&gcc GSBI1_H_CLK>;
356			clock-names = "iface";
357			#address-cells = <1>;
358			#size-cells = <1>;
359			ranges;
360
361			gsbi1_spi: spi@16080000 {
362				compatible = "qcom,spi-qup-v1.1.1";
363				#address-cells = <1>;
364				#size-cells = <0>;
365				reg = <0x16080000 0x1000>;
366				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
367				spi-max-frequency = <24000000>;
368				cs-gpios = <&msmgpio 8 0>;
369
370				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
371				clock-names = "core", "iface";
372				status = "disabled";
373			};
374		};
375
376		usb1: usb@12500000 {
377			compatible = "qcom,ci-hdrc";
378			reg = <0x12500000 0x200>,
379			      <0x12500200 0x200>;
380			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
381			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
382			clock-names = "core", "iface";
383			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
384			assigned-clock-rates = <60000000>;
385			resets = <&gcc USB_HS1_RESET>;
386			reset-names = "core";
387			phy_type = "ulpi";
388			ahb-burst-config = <0>;
389			phys = <&usb_hs1_phy>;
390			phy-names = "usb-phy";
391			#reset-cells = <1>;
392			status = "disabled";
393
394			ulpi {
395				usb_hs1_phy: phy {
396					compatible = "qcom,usb-hs-phy-msm8960",
397						     "qcom,usb-hs-phy";
398					clocks = <&sleep_clk>, <&cxo_board>;
399					clock-names = "sleep", "ref";
400					resets = <&usb1 0>;
401					reset-names = "por";
402					#phy-cells = <0>;
403				};
404			};
405		};
406	};
407};
408