1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9#include <dt-bindings/clock/qcom,gcc-msm8974.h>
10#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
11#include <dt-bindings/clock/qcom,rpmcc.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/power/qcom-rpmpd.h>
14#include <dt-bindings/reset/qcom,gcc-msm8974.h>
15
16/ {
17	#address-cells = <1>;
18	#size-cells = <1>;
19	interrupt-parent = <&intc>;
20
21	chosen { };
22
23	memory@0 {
24		device_type = "memory";
25		reg = <0x0 0x0>;
26	};
27
28	clocks {
29		xo_board: xo_board {
30			compatible = "fixed-clock";
31			#clock-cells = <0>;
32			clock-frequency = <19200000>;
33		};
34
35		sleep_clk: sleep_clk {
36			compatible = "fixed-clock";
37			#clock-cells = <0>;
38			clock-frequency = <32768>;
39		};
40	};
41
42	firmware {
43		scm {
44			compatible = "qcom,scm-msm8226", "qcom,scm";
45			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
46			clock-names = "core", "bus", "iface";
47		};
48	};
49
50	pmu {
51		compatible = "arm,cortex-a7-pmu";
52		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
53					 IRQ_TYPE_LEVEL_HIGH)>;
54	};
55
56	rpm: remoteproc {
57		compatible = "qcom,msm8226-rpm-proc", "qcom,rpm-proc";
58
59		smd-edge {
60			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
61			qcom,ipc = <&apcs 8 0>;
62			qcom,smd-edge = <15>;
63
64			rpm_requests: rpm-requests {
65				compatible = "qcom,rpm-msm8226";
66				qcom,smd-channels = "rpm_requests";
67
68				rpmcc: clock-controller {
69					compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
70					#clock-cells = <1>;
71					clocks = <&xo_board>;
72					clock-names = "xo";
73				};
74
75				rpmpd: power-controller {
76					compatible = "qcom,msm8226-rpmpd";
77					#power-domain-cells = <1>;
78					operating-points-v2 = <&rpmpd_opp_table>;
79
80					rpmpd_opp_table: opp-table {
81						compatible = "operating-points-v2";
82
83						rpmpd_opp_ret: opp1 {
84							opp-level = <1>;
85						};
86						rpmpd_opp_svs_krait: opp2 {
87							opp-level = <2>;
88						};
89						rpmpd_opp_svs_soc: opp3 {
90							opp-level = <3>;
91						};
92						rpmpd_opp_nom: opp4 {
93							opp-level = <4>;
94						};
95						rpmpd_opp_turbo: opp5 {
96							opp-level = <5>;
97						};
98						rpmpd_opp_super_turbo: opp6 {
99							opp-level = <6>;
100						};
101					};
102				};
103			};
104		};
105	};
106
107	reserved-memory {
108		#address-cells = <1>;
109		#size-cells = <1>;
110		ranges;
111
112		smem_region: smem@3000000 {
113			reg = <0x3000000 0x100000>;
114			no-map;
115		};
116
117		adsp_region: adsp@dc00000 {
118			reg = <0x0dc00000 0x1900000>;
119			no-map;
120		};
121	};
122
123	smem {
124		compatible = "qcom,smem";
125
126		memory-region = <&smem_region>;
127		qcom,rpm-msg-ram = <&rpm_msg_ram>;
128
129		hwlocks = <&tcsr_mutex 3>;
130	};
131
132	smp2p-adsp {
133		compatible = "qcom,smp2p";
134		qcom,smem = <443>, <429>;
135
136		interrupt-parent = <&intc>;
137		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
138
139		qcom,ipc = <&apcs 8 10>;
140
141		qcom,local-pid = <0>;
142		qcom,remote-pid = <2>;
143
144		adsp_smp2p_out: master-kernel {
145			qcom,entry-name = "master-kernel";
146			#qcom,smem-state-cells = <1>;
147		};
148
149		adsp_smp2p_in: slave-kernel {
150			qcom,entry-name = "slave-kernel";
151
152			interrupt-controller;
153			#interrupt-cells = <2>;
154		};
155	};
156
157	soc: soc {
158		compatible = "simple-bus";
159		#address-cells = <1>;
160		#size-cells = <1>;
161		ranges;
162
163		intc: interrupt-controller@f9000000 {
164			compatible = "qcom,msm-qgic2";
165			reg = <0xf9000000 0x1000>,
166			      <0xf9002000 0x1000>;
167			interrupt-controller;
168			#interrupt-cells = <3>;
169		};
170
171		apcs: syscon@f9011000 {
172			compatible = "syscon";
173			reg = <0xf9011000 0x1000>;
174		};
175
176		sdhc_1: mmc@f9824900 {
177			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
178			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
179			reg-names = "hc", "core";
180			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
181				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
182			interrupt-names = "hc_irq", "pwr_irq";
183			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
184				 <&gcc GCC_SDCC1_APPS_CLK>,
185				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
186			clock-names = "iface", "core", "xo";
187			pinctrl-names = "default";
188			pinctrl-0 = <&sdhc1_default_state>;
189			status = "disabled";
190		};
191
192		sdhc_2: mmc@f98a4900 {
193			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
194			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
195			reg-names = "hc", "core";
196			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
197				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
198			interrupt-names = "hc_irq", "pwr_irq";
199			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
200				 <&gcc GCC_SDCC2_APPS_CLK>,
201				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
202			clock-names = "iface", "core", "xo";
203			pinctrl-names = "default";
204			pinctrl-0 = <&sdhc2_default_state>;
205			status = "disabled";
206		};
207
208		sdhc_3: mmc@f9864900 {
209			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
210			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
211			reg-names = "hc", "core";
212			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
213				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
214			interrupt-names = "hc_irq", "pwr_irq";
215			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
216				 <&gcc GCC_SDCC3_APPS_CLK>,
217				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
218			clock-names = "iface", "core", "xo";
219			pinctrl-names = "default";
220			pinctrl-0 = <&sdhc3_default_state>;
221			status = "disabled";
222		};
223
224		blsp1_uart1: serial@f991d000 {
225			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
226			reg = <0xf991d000 0x1000>;
227			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
228			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
229			clock-names = "core", "iface";
230			status = "disabled";
231		};
232
233		blsp1_uart3: serial@f991f000 {
234			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
235			reg = <0xf991f000 0x1000>;
236			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
237			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
238			clock-names = "core", "iface";
239			status = "disabled";
240		};
241
242		blsp1_uart4: serial@f9920000 {
243			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
244			reg = <0xf9920000 0x1000>;
245			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
246			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
247			clock-names = "core", "iface";
248			status = "disabled";
249		};
250
251		blsp1_i2c1: i2c@f9923000 {
252			status = "disabled";
253			compatible = "qcom,i2c-qup-v2.1.1";
254			reg = <0xf9923000 0x1000>;
255			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
256			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
257			clock-names = "core", "iface";
258			pinctrl-names = "default";
259			pinctrl-0 = <&blsp1_i2c1_pins>;
260			#address-cells = <1>;
261			#size-cells = <0>;
262		};
263
264		blsp1_i2c2: i2c@f9924000 {
265			status = "disabled";
266			compatible = "qcom,i2c-qup-v2.1.1";
267			reg = <0xf9924000 0x1000>;
268			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
269			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
270			clock-names = "core", "iface";
271			pinctrl-names = "default";
272			pinctrl-0 = <&blsp1_i2c2_pins>;
273			#address-cells = <1>;
274			#size-cells = <0>;
275		};
276
277		blsp1_i2c3: i2c@f9925000 {
278			status = "disabled";
279			compatible = "qcom,i2c-qup-v2.1.1";
280			reg = <0xf9925000 0x1000>;
281			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
282			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
283			clock-names = "core", "iface";
284			pinctrl-names = "default";
285			pinctrl-0 = <&blsp1_i2c3_pins>;
286			#address-cells = <1>;
287			#size-cells = <0>;
288		};
289
290		blsp1_i2c4: i2c@f9926000 {
291			status = "disabled";
292			compatible = "qcom,i2c-qup-v2.1.1";
293			reg = <0xf9926000 0x1000>;
294			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
295			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
296			clock-names = "core", "iface";
297			pinctrl-names = "default";
298			pinctrl-0 = <&blsp1_i2c4_pins>;
299			#address-cells = <1>;
300			#size-cells = <0>;
301		};
302
303		blsp1_i2c5: i2c@f9927000 {
304			status = "disabled";
305			compatible = "qcom,i2c-qup-v2.1.1";
306			reg = <0xf9927000 0x1000>;
307			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
308			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
309			clock-names = "core", "iface";
310			pinctrl-names = "default";
311			pinctrl-0 = <&blsp1_i2c5_pins>;
312			#address-cells = <1>;
313			#size-cells = <0>;
314		};
315
316		cci: cci@fda0c000 {
317			compatible = "qcom,msm8226-cci";
318			#address-cells = <1>;
319			#size-cells = <0>;
320			reg = <0xfda0c000 0x1000>;
321			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
322			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
323				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
324				 <&mmcc CAMSS_CCI_CCI_CLK>;
325			clock-names = "camss_top_ahb",
326				      "cci_ahb",
327				      "cci";
328
329			pinctrl-names = "default", "sleep";
330			pinctrl-0 = <&cci_default>;
331			pinctrl-1 = <&cci_sleep>;
332
333			status = "disabled";
334
335			cci_i2c0: i2c-bus@0 {
336				reg = <0>;
337				clock-frequency = <400000>;
338				#address-cells = <1>;
339				#size-cells = <0>;
340			};
341		};
342
343		usb: usb@f9a55000 {
344			compatible = "qcom,ci-hdrc";
345			reg = <0xf9a55000 0x200>,
346			      <0xf9a55200 0x200>;
347			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
348			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
349				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
350			clock-names = "iface", "core";
351			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
352			assigned-clock-rates = <75000000>;
353			resets = <&gcc GCC_USB_HS_BCR>;
354			reset-names = "core";
355			phy_type = "ulpi";
356			dr_mode = "otg";
357			hnp-disable;
358			srp-disable;
359			adp-disable;
360			ahb-burst-config = <0>;
361			phy-names = "usb-phy";
362			phys = <&usb_hs_phy>;
363			status = "disabled";
364			#reset-cells = <1>;
365
366			ulpi {
367				usb_hs_phy: phy {
368					compatible = "qcom,usb-hs-phy-msm8226",
369						     "qcom,usb-hs-phy";
370					#phy-cells = <0>;
371					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
372						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
373					clock-names = "ref", "sleep";
374					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
375					reset-names = "phy", "por";
376					qcom,init-seq = /bits/ 8 <0x0 0x44
377						0x1 0x68 0x2 0x24 0x3 0x13>;
378				};
379			};
380		};
381
382		gcc: clock-controller@fc400000 {
383			compatible = "qcom,gcc-msm8226";
384			reg = <0xfc400000 0x4000>;
385			#clock-cells = <1>;
386			#reset-cells = <1>;
387			#power-domain-cells = <1>;
388
389			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
390				 <&sleep_clk>;
391			clock-names = "xo",
392				      "sleep_clk";
393		};
394
395		mmcc: clock-controller@fd8c0000 {
396			compatible = "qcom,mmcc-msm8226";
397			reg = <0xfd8c0000 0x6000>;
398			#clock-cells = <1>;
399			#reset-cells = <1>;
400			#power-domain-cells = <1>;
401
402			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
403				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
404				 <&gcc GPLL0_VOTE>,
405				 <&gcc GPLL1_VOTE>,
406				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
407				 <0>,
408				 <0>;
409			clock-names = "xo",
410				      "mmss_gpll0_vote",
411				      "gpll0_vote",
412				      "gpll1_vote",
413				      "gfx3d_clk_src",
414				      "dsi0pll",
415				      "dsi0pllbyte";
416		};
417
418		tlmm: pinctrl@fd510000 {
419			compatible = "qcom,msm8226-pinctrl";
420			reg = <0xfd510000 0x4000>;
421			gpio-controller;
422			#gpio-cells = <2>;
423			gpio-ranges = <&tlmm 0 0 117>;
424			interrupt-controller;
425			#interrupt-cells = <2>;
426			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
427
428			blsp1_i2c1_pins: blsp1-i2c1-state {
429				pins = "gpio2", "gpio3";
430				function = "blsp_i2c1";
431				drive-strength = <2>;
432				bias-disable;
433			};
434
435			blsp1_i2c2_pins: blsp1-i2c2-state {
436				pins = "gpio6", "gpio7";
437				function = "blsp_i2c2";
438				drive-strength = <2>;
439				bias-disable;
440			};
441
442			blsp1_i2c3_pins: blsp1-i2c3-state {
443				pins = "gpio10", "gpio11";
444				function = "blsp_i2c3";
445				drive-strength = <2>;
446				bias-disable;
447			};
448
449			blsp1_i2c4_pins: blsp1-i2c4-state {
450				pins = "gpio14", "gpio15";
451				function = "blsp_i2c4";
452				drive-strength = <2>;
453				bias-disable;
454			};
455
456			blsp1_i2c5_pins: blsp1-i2c5-state {
457				pins = "gpio18", "gpio19";
458				function = "blsp_i2c5";
459				drive-strength = <2>;
460				bias-disable;
461			};
462
463			cci_default: cci-default-state {
464				pins = "gpio29", "gpio30";
465				function = "cci_i2c0";
466
467				drive-strength = <2>;
468				bias-disable;
469			};
470
471			cci_sleep: cci-sleep-state {
472				pins = "gpio29", "gpio30";
473				function = "gpio";
474
475				drive-strength = <2>;
476				bias-disable;
477			};
478
479			sdhc1_default_state: sdhc1-default-state {
480				clk-pins {
481					pins = "sdc1_clk";
482					drive-strength = <10>;
483					bias-disable;
484				};
485
486				cmd-data-pins {
487					pins = "sdc1_cmd", "sdc1_data";
488					drive-strength = <10>;
489					bias-pull-up;
490				};
491			};
492
493			sdhc2_default_state: sdhc2-default-state {
494				clk-pins {
495					pins = "sdc2_clk";
496					drive-strength = <10>;
497					bias-disable;
498				};
499
500				cmd-data-pins {
501					pins = "sdc2_cmd", "sdc2_data";
502					drive-strength = <10>;
503					bias-pull-up;
504				};
505			};
506
507			sdhc3_default_state: sdhc3-default-state {
508				clk-pins {
509					pins = "gpio44";
510					function = "sdc3";
511					drive-strength = <8>;
512					bias-disable;
513				};
514
515				cmd-pins {
516					pins = "gpio43";
517					function = "sdc3";
518					drive-strength = <8>;
519					bias-pull-up;
520				};
521
522				data-pins {
523					pins = "gpio39", "gpio40", "gpio41", "gpio42";
524					function = "sdc3";
525					drive-strength = <8>;
526					bias-pull-up;
527				};
528			};
529		};
530
531		tsens: thermal-sensor@fc4a9000 {
532			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
533			reg = <0xfc4a9000 0x1000>, /* TM */
534			      <0xfc4a8000 0x1000>; /* SROT */
535			nvmem-cells = <&tsens_mode>,
536				      <&tsens_base1>, <&tsens_base2>,
537				      <&tsens_s0_p1>, <&tsens_s0_p2>,
538				      <&tsens_s1_p1>, <&tsens_s1_p2>,
539				      <&tsens_s2_p1>, <&tsens_s2_p2>,
540				      <&tsens_s3_p1>, <&tsens_s3_p2>,
541				      <&tsens_s4_p1>, <&tsens_s4_p2>,
542				      <&tsens_s5_p1>, <&tsens_s5_p2>,
543				      <&tsens_s6_p1>, <&tsens_s6_p2>;
544			nvmem-cell-names = "mode",
545					   "base1", "base2",
546					   "s0_p1", "s0_p2",
547					   "s1_p1", "s1_p2",
548					   "s2_p1", "s2_p2",
549					   "s3_p1", "s3_p2",
550					   "s4_p1", "s4_p2",
551					   "s5_p1", "s5_p2",
552					   "s6_p1", "s6_p2";
553			#qcom,sensors = <6>;
554			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
555			interrupt-names = "uplow";
556			#thermal-sensor-cells = <1>;
557		};
558
559		restart@fc4ab000 {
560			compatible = "qcom,pshold";
561			reg = <0xfc4ab000 0x4>;
562		};
563
564		qfprom: qfprom@fc4bc000 {
565			compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
566			reg = <0xfc4bc000 0x1000>;
567			#address-cells = <1>;
568			#size-cells = <1>;
569
570			tsens_base1: base1@1c1 {
571				reg = <0x1c1 0x2>;
572				bits = <5 8>;
573			};
574
575			tsens_s0_p1: s0-p1@1c2 {
576				reg = <0x1c2 0x2>;
577				bits = <5 6>;
578			};
579
580			tsens_s1_p1: s1-p1@1c4 {
581				reg = <0x1c4 0x1>;
582				bits = <0 6>;
583			};
584
585			tsens_s2_p1: s2-p1@1c4 {
586				reg = <0x1c4 0x2>;
587				bits = <6 6>;
588			};
589
590			tsens_s3_p1: s3-p1@1c5 {
591				reg = <0x1c5 0x2>;
592				bits = <4 6>;
593			};
594
595			tsens_s4_p1: s4-p1@1c6 {
596				reg = <0x1c6 0x1>;
597				bits = <2 6>;
598			};
599
600			tsens_s5_p1: s5-p1@1c7 {
601				reg = <0x1c7 0x1>;
602				bits = <0 6>;
603			};
604
605			tsens_s6_p1: s6-p1@1ca {
606				reg = <0x1ca 0x2>;
607				bits = <4 6>;
608			};
609
610			tsens_base2: base2@1cc {
611				reg = <0x1cc 0x1>;
612				bits = <0 8>;
613			};
614
615			tsens_s0_p2: s0-p2@1cd {
616				reg = <0x1cd 0x1>;
617				bits = <0 6>;
618			};
619
620			tsens_s1_p2: s1-p2@1cd {
621				reg = <0x1cd 0x2>;
622				bits = <6 6>;
623			};
624
625			tsens_s2_p2: s2-p2@1ce {
626				reg = <0x1ce 0x2>;
627				bits = <4 6>;
628			};
629
630			tsens_s3_p2: s3-p2@1cf {
631				reg = <0x1cf 0x1>;
632				bits = <2 6>;
633			};
634
635			tsens_s4_p2: s4-p2@446 {
636				reg = <0x446 0x2>;
637				bits = <4 6>;
638			};
639
640			tsens_s5_p2: s5-p2@447 {
641				reg = <0x447 0x1>;
642				bits = <2 6>;
643			};
644
645			tsens_s6_p2: s6-p2@44e {
646				reg = <0x44e 0x1>;
647				bits = <1 6>;
648			};
649
650			tsens_mode: mode@44f {
651				reg = <0x44f 0x1>;
652				bits = <5 3>;
653			};
654		};
655
656		spmi_bus: spmi@fc4cf000 {
657			compatible = "qcom,spmi-pmic-arb";
658			reg-names = "core", "intr", "cnfg";
659			reg = <0xfc4cf000 0x1000>,
660			      <0xfc4cb000 0x1000>,
661			      <0xfc4ca000 0x1000>;
662			interrupt-names = "periph_irq";
663			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
664			qcom,ee = <0>;
665			qcom,channel = <0>;
666			#address-cells = <2>;
667			#size-cells = <0>;
668			interrupt-controller;
669			#interrupt-cells = <4>;
670		};
671
672		rng@f9bff000 {
673			compatible = "qcom,prng";
674			reg = <0xf9bff000 0x200>;
675			clocks = <&gcc GCC_PRNG_AHB_CLK>;
676			clock-names = "core";
677		};
678
679		timer@f9020000 {
680			compatible = "arm,armv7-timer-mem";
681			reg = <0xf9020000 0x1000>;
682			#address-cells = <1>;
683			#size-cells = <1>;
684			ranges;
685
686			frame@f9021000 {
687				frame-number = <0>;
688				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
689					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
690				reg = <0xf9021000 0x1000>,
691				      <0xf9022000 0x1000>;
692			};
693
694			frame@f9023000 {
695				frame-number = <1>;
696				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
697				reg = <0xf9023000 0x1000>;
698				status = "disabled";
699			};
700
701			frame@f9024000 {
702				frame-number = <2>;
703				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
704				reg = <0xf9024000 0x1000>;
705				status = "disabled";
706			};
707
708			frame@f9025000 {
709				frame-number = <3>;
710				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
711				reg = <0xf9025000 0x1000>;
712				status = "disabled";
713			};
714
715			frame@f9026000 {
716				frame-number = <4>;
717				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
718				reg = <0xf9026000 0x1000>;
719				status = "disabled";
720			};
721
722			frame@f9027000 {
723				frame-number = <5>;
724				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
725				reg = <0xf9027000 0x1000>;
726				status = "disabled";
727			};
728
729			frame@f9028000 {
730				frame-number = <6>;
731				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
732				reg = <0xf9028000 0x1000>;
733				status = "disabled";
734			};
735		};
736
737		sram@fc190000 {
738			compatible = "qcom,msm8226-rpm-stats";
739			reg = <0xfc190000 0x10000>;
740		};
741
742		rpm_msg_ram: sram@fc428000 {
743			compatible = "qcom,rpm-msg-ram";
744			reg = <0xfc428000 0x4000>;
745		};
746
747		tcsr_mutex: hwlock@fd484000 {
748			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
749			reg = <0xfd484000 0x1000>;
750			#hwlock-cells = <1>;
751		};
752
753		adsp: remoteproc@fe200000 {
754			compatible = "qcom,msm8226-adsp-pil";
755			reg = <0xfe200000 0x100>;
756
757			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
758					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
759					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
760					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
761					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
762			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
763
764			power-domains = <&rpmpd MSM8226_VDDCX>;
765			power-domain-names = "cx";
766
767			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
768			clock-names = "xo";
769
770			memory-region = <&adsp_region>;
771
772			qcom,smem-states = <&adsp_smp2p_out 0>;
773			qcom,smem-state-names = "stop";
774
775			status = "disabled";
776
777			smd-edge {
778				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
779
780				qcom,ipc = <&apcs 8 8>;
781				qcom,smd-edge = <1>;
782
783				label = "lpass";
784			};
785		};
786
787		sram@fdd00000 {
788			compatible = "qcom,msm8226-ocmem";
789			reg = <0xfdd00000 0x2000>,
790			      <0xfec00000 0x20000>;
791			reg-names = "ctrl", "mem";
792			ranges = <0 0xfec00000 0x20000>;
793			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
794			clock-names = "core";
795
796			#address-cells = <1>;
797			#size-cells = <1>;
798
799			gmu_sram: gmu-sram@0 {
800				reg = <0x0 0x20000>;
801			};
802		};
803
804		sram@fe805000 {
805			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
806			reg = <0xfe805000 0x1000>;
807
808			reboot-mode {
809				compatible = "syscon-reboot-mode";
810				offset = <0x65c>;
811
812				mode-bootloader = <0x77665500>;
813				mode-normal     = <0x77665501>;
814				mode-recovery   = <0x77665502>;
815			};
816		};
817
818		mdss: display-subsystem@fd900000 {
819			compatible = "qcom,mdss";
820			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
821			reg-names = "mdss_phys", "vbif_phys";
822
823			power-domains = <&mmcc MDSS_GDSC>;
824
825			clocks = <&mmcc MDSS_AHB_CLK>,
826				 <&mmcc MDSS_AXI_CLK>,
827				 <&mmcc MDSS_VSYNC_CLK>;
828			clock-names = "iface",
829				      "bus",
830				      "vsync";
831
832			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
833
834			interrupt-controller;
835			#interrupt-cells = <1>;
836
837			#address-cells = <1>;
838			#size-cells = <1>;
839			ranges;
840
841			status = "disabled";
842
843			mdss_mdp: display-controller@fd900000 {
844				compatible = "qcom,msm8226-mdp5", "qcom,mdp5";
845				reg = <0xfd900100 0x22000>;
846				reg-names = "mdp_phys";
847
848				interrupt-parent = <&mdss>;
849				interrupts = <0>;
850
851				clocks = <&mmcc MDSS_AHB_CLK>,
852					 <&mmcc MDSS_AXI_CLK>,
853					 <&mmcc MDSS_MDP_CLK>,
854					 <&mmcc MDSS_VSYNC_CLK>;
855				clock-names = "iface",
856					      "bus",
857					      "core",
858					      "vsync";
859
860				ports {
861					#address-cells = <1>;
862					#size-cells = <0>;
863
864					port@0 {
865						reg = <0>;
866						mdss_mdp_intf1_out: endpoint {
867							remote-endpoint = <&mdss_dsi0_in>;
868						};
869					};
870				};
871			};
872
873			mdss_dsi0: dsi@fd922800 {
874				compatible = "qcom,msm8226-dsi-ctrl",
875					     "qcom,mdss-dsi-ctrl";
876				reg = <0xfd922800 0x1f8>;
877				reg-names = "dsi_ctrl";
878
879				interrupt-parent = <&mdss>;
880				interrupts = <4>;
881
882				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
883						  <&mmcc PCLK0_CLK_SRC>;
884				assigned-clock-parents = <&mdss_dsi0_phy 0>,
885							 <&mdss_dsi0_phy 1>;
886
887				clocks = <&mmcc MDSS_MDP_CLK>,
888					 <&mmcc MDSS_AHB_CLK>,
889					 <&mmcc MDSS_AXI_CLK>,
890					 <&mmcc MDSS_BYTE0_CLK>,
891					 <&mmcc MDSS_PCLK0_CLK>,
892					 <&mmcc MDSS_ESC0_CLK>,
893					 <&mmcc MMSS_MISC_AHB_CLK>;
894				clock-names = "mdp_core",
895					      "iface",
896					      "bus",
897					      "byte",
898					      "pixel",
899					      "core",
900					      "core_mmss";
901
902				phys = <&mdss_dsi0_phy>;
903
904				#address-cells = <1>;
905				#size-cells = <0>;
906
907				ports {
908					#address-cells = <1>;
909					#size-cells = <0>;
910
911					port@0 {
912						reg = <0>;
913						mdss_dsi0_in: endpoint {
914							remote-endpoint = <&mdss_mdp_intf1_out>;
915						};
916					};
917
918					port@1 {
919						reg = <1>;
920						mdss_dsi0_out: endpoint {
921						};
922					};
923				};
924			};
925
926			mdss_dsi0_phy: phy@fd922a00 {
927				compatible = "qcom,dsi-phy-28nm-8226";
928				reg = <0xfd922a00 0xd4>,
929				      <0xfd922b00 0x280>,
930				      <0xfd922d80 0x30>;
931				reg-names = "dsi_pll",
932					    "dsi_phy",
933					    "dsi_phy_regulator";
934
935				#clock-cells = <1>;
936				#phy-cells = <0>;
937
938				clocks = <&mmcc MDSS_AHB_CLK>,
939					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
940				clock-names = "iface",
941					      "ref";
942			};
943		};
944	};
945
946	thermal-zones {
947		cpu0-thermal {
948			polling-delay-passive = <250>;
949			polling-delay = <1000>;
950
951			thermal-sensors = <&tsens 5>;
952
953			trips {
954				cpu_alert0: trip0 {
955					temperature = <75000>;
956					hysteresis = <2000>;
957					type = "passive";
958				};
959
960				cpu_crit0: trip1 {
961					temperature = <110000>;
962					hysteresis = <2000>;
963					type = "critical";
964				};
965			};
966		};
967
968		cpu1-thermal {
969			polling-delay-passive = <250>;
970			polling-delay = <1000>;
971
972			thermal-sensors = <&tsens 2>;
973
974			trips {
975				cpu_alert1: trip0 {
976					temperature = <75000>;
977					hysteresis = <2000>;
978					type = "passive";
979				};
980
981				cpu_crit1: trip1 {
982					temperature = <110000>;
983					hysteresis = <2000>;
984					type = "critical";
985				};
986			};
987		};
988	};
989
990	timer {
991		compatible = "arm,armv7-timer";
992		interrupts = <GIC_PPI 2
993				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
994			     <GIC_PPI 3
995				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
996			     <GIC_PPI 4
997				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
998			     <GIC_PPI 1
999				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
1000	};
1001};
1002