1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0 2*724ba675SRob Herring// Copyright (c) 2018, The Linux Foundation. All rights reserved. 3*724ba675SRob Herring 4*724ba675SRob Herring#include <dt-bindings/gpio/gpio.h> 5*724ba675SRob Herring#include "qcom-ipq4019-ap.dk07.1.dtsi" 6*724ba675SRob Herring 7*724ba675SRob Herring/ { 8*724ba675SRob Herring model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; 9*724ba675SRob Herring compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019"; 10*724ba675SRob Herring 11*724ba675SRob Herring soc { 12*724ba675SRob Herring pci@40000000 { 13*724ba675SRob Herring status = "okay"; 14*724ba675SRob Herring perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; 15*724ba675SRob Herring }; 16*724ba675SRob Herring 17*724ba675SRob Herring spi@78b6000 { 18*724ba675SRob Herring status = "okay"; 19*724ba675SRob Herring }; 20*724ba675SRob Herring 21*724ba675SRob Herring pinctrl@1000000 { 22*724ba675SRob Herring serial_1_pins: serial1-pinmux { 23*724ba675SRob Herring pins = "gpio8", "gpio9", 24*724ba675SRob Herring "gpio10", "gpio11"; 25*724ba675SRob Herring function = "blsp_uart1"; 26*724ba675SRob Herring bias-disable; 27*724ba675SRob Herring }; 28*724ba675SRob Herring 29*724ba675SRob Herring spi_0_pins: spi-0-pinmux { 30*724ba675SRob Herring pinmux { 31*724ba675SRob Herring function = "blsp_spi0"; 32*724ba675SRob Herring pins = "gpio13", "gpio14", "gpio15"; 33*724ba675SRob Herring bias-disable; 34*724ba675SRob Herring }; 35*724ba675SRob Herring pinmux_cs { 36*724ba675SRob Herring function = "gpio"; 37*724ba675SRob Herring pins = "gpio12"; 38*724ba675SRob Herring bias-disable; 39*724ba675SRob Herring output-high; 40*724ba675SRob Herring }; 41*724ba675SRob Herring }; 42*724ba675SRob Herring }; 43*724ba675SRob Herring 44*724ba675SRob Herring serial@78b0000 { 45*724ba675SRob Herring pinctrl-0 = <&serial_1_pins>; 46*724ba675SRob Herring pinctrl-names = "default"; 47*724ba675SRob Herring status = "okay"; 48*724ba675SRob Herring }; 49*724ba675SRob Herring 50*724ba675SRob Herring spi@78b5000 { 51*724ba675SRob Herring pinctrl-0 = <&spi_0_pins>; 52*724ba675SRob Herring pinctrl-names = "default"; 53*724ba675SRob Herring status = "okay"; 54*724ba675SRob Herring cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; 55*724ba675SRob Herring 56*724ba675SRob Herring flash@0 { 57*724ba675SRob Herring #address-cells = <1>; 58*724ba675SRob Herring #size-cells = <1>; 59*724ba675SRob Herring reg = <0>; 60*724ba675SRob Herring compatible = "micron,n25q128a11", "jedec,spi-nor"; 61*724ba675SRob Herring spi-max-frequency = <24000000>; 62*724ba675SRob Herring }; 63*724ba675SRob Herring }; 64*724ba675SRob Herring }; 65*724ba675SRob Herring}; 66