1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2012 Free Electrons
4 */
5
6/*
7 * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
8 * need to include the CFA-10036 DTS.
9 */
10#include "imx28-cfa10036.dts"
11
12/ {
13	model = "Crystalfontz CFA-10037 Board";
14	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
15
16	apb@80000000 {
17		apbh@80000000 {
18			pinctrl@80018000 {
19				usb_pins_cfa10037: usb-10037@0 {
20					reg = <0>;
21					fsl,pinmux-ids = <
22						MX28_PAD_GPMI_D07__GPIO_0_7
23					>;
24					fsl,drive-strength = <MXS_DRIVE_4mA>;
25					fsl,voltage = <MXS_VOLTAGE_HIGH>;
26					fsl,pull-up = <MXS_PULL_DISABLE>;
27				};
28
29				mac0_pins_cfa10037: mac0-10037@0 {
30					reg = <0>;
31					fsl,pinmux-ids = <
32						MX28_PAD_SSP2_SS2__GPIO_2_21
33					>;
34					fsl,drive-strength = <MXS_DRIVE_4mA>;
35					fsl,voltage = <MXS_VOLTAGE_HIGH>;
36					fsl,pull-up = <MXS_PULL_DISABLE>;
37				};
38			};
39		};
40
41		apbx@80040000 {
42			usbphy1: usbphy@8007e000 {
43				status = "okay";
44			};
45		};
46	};
47
48	ahb@80080000 {
49		usb1: usb@80090000 {
50			vbus-supply = <&reg_usb1_vbus>;
51			pinctrl-0 = <&usb1_pins_a>;
52			pinctrl-names = "default";
53			status = "okay";
54		};
55
56		mac0: ethernet@800f0000 {
57			phy-mode = "rmii";
58			pinctrl-names = "default";
59			pinctrl-0 = <&mac0_pins_a
60				&mac0_pins_cfa10037>;
61			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
62			phy-reset-duration = <100>;
63			status = "okay";
64		};
65	};
66
67	regulators {
68		compatible = "simple-bus";
69		#address-cells = <1>;
70		#size-cells = <0>;
71
72		reg_usb1_vbus: regulator@0 {
73			compatible = "regulator-fixed";
74			reg = <0>;
75			pinctrl-names = "default";
76			pinctrl-0 = <&usb_pins_cfa10037>;
77			regulator-name = "usb1_vbus";
78			regulator-min-microvolt = <5000000>;
79			regulator-max-microvolt = <5000000>;
80			gpio = <&gpio0 7 1>;
81		};
82	};
83};
84