xref: /openbmc/linux/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts (revision 801b27e8)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Copyright (C) 2015 Freescale Semiconductor, Inc.
4
5/dts-v1/;
6
7#include "imx7d.dtsi"
8
9/ {
10	model = "Freescale i.MX7 SabreSD Board";
11	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
12
13	chosen {
14		stdout-path = &uart1;
15	};
16
17	memory@80000000 {
18		device_type = "memory";
19		reg = <0x80000000 0x80000000>;
20	};
21
22	gpio-keys {
23		compatible = "gpio-keys";
24		pinctrl-names = "default";
25		pinctrl-0 = <&pinctrl_gpio_keys>;
26
27		key-volume-up {
28			label = "Volume Up";
29			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
30			linux,code = <KEY_VOLUMEUP>;
31			wakeup-source;
32		};
33
34		key-volume-down {
35			label = "Volume Down";
36			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
37			linux,code = <KEY_VOLUMEDOWN>;
38			wakeup-source;
39		};
40	};
41
42	spi-4 {
43		compatible = "spi-gpio";
44		pinctrl-names = "default";
45		pinctrl-0 = <&pinctrl_spi4>;
46		sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
47		mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
48		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
49		num-chipselects = <1>;
50		#address-cells = <1>;
51		#size-cells = <0>;
52
53		extended_io: gpio-expander@0 {
54			compatible = "fairchild,74hc595";
55			gpio-controller;
56			#gpio-cells = <2>;
57			reg = <0>;
58			registers-number = <1>;
59			spi-max-frequency = <100000>;
60		};
61	};
62
63	reg_sd1_vmmc: regulator-sd1-vmmc {
64		compatible = "regulator-fixed";
65		regulator-name = "VDD_SD1";
66		regulator-min-microvolt = <3300000>;
67		regulator-max-microvolt = <3300000>;
68		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
69		enable-active-high;
70		startup-delay-us = <200000>;
71		off-on-delay-us = <20000>;
72	};
73
74	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
75		compatible = "regulator-fixed";
76		regulator-name = "usb_otg1_vbus";
77		regulator-min-microvolt = <5000000>;
78		regulator-max-microvolt = <5000000>;
79		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
80		enable-active-high;
81	};
82
83	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
84		compatible = "regulator-fixed";
85		regulator-name = "usb_otg2_vbus";
86		pinctrl-names = "default";
87		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
88		regulator-min-microvolt = <5000000>;
89		regulator-max-microvolt = <5000000>;
90		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
91		enable-active-high;
92	};
93
94	reg_vref_1v8: regulator-vref-1v8 {
95		compatible = "regulator-fixed";
96		regulator-name = "vref-1v8";
97		regulator-min-microvolt = <1800000>;
98		regulator-max-microvolt = <1800000>;
99	};
100
101	reg_brcm: regulator-brcm {
102		compatible = "regulator-fixed";
103		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
104		enable-active-high;
105		regulator-name = "brcm_reg";
106		pinctrl-names = "default";
107		pinctrl-0 = <&pinctrl_brcm_reg>;
108		regulator-min-microvolt = <3300000>;
109		regulator-max-microvolt = <3300000>;
110		startup-delay-us = <200000>;
111	};
112
113	reg_lcd_3v3: regulator-lcd-3v3 {
114		compatible = "regulator-fixed";
115		regulator-name = "lcd-3v3";
116		regulator-min-microvolt = <3300000>;
117		regulator-max-microvolt = <3300000>;
118		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
119	};
120
121	reg_can2_3v3: regulator-can2-3v3 {
122		compatible = "regulator-fixed";
123		regulator-name = "can2-3v3";
124		pinctrl-names = "default";
125		pinctrl-0 = <&pinctrl_flexcan2_reg>;
126		regulator-min-microvolt = <3300000>;
127		regulator-max-microvolt = <3300000>;
128		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
129	};
130
131	reg_fec2_3v3: regulator-fec2-3v3 {
132		compatible = "regulator-fixed";
133		regulator-name = "fec2-3v3";
134		pinctrl-names = "default";
135		pinctrl-0 = <&pinctrl_enet2_reg>;
136		regulator-min-microvolt = <3300000>;
137		regulator-max-microvolt = <3300000>;
138		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
139	};
140
141	backlight: backlight {
142		compatible = "pwm-backlight";
143		pwms = <&pwm1 0 5000000 0>;
144		brightness-levels = <0 4 8 16 32 64 128 255>;
145		default-brightness-level = <6>;
146		status = "okay";
147	};
148
149	panel {
150		compatible = "innolux,at043tn24";
151		backlight = <&backlight>;
152		power-supply = <&reg_lcd_3v3>;
153
154		port {
155			panel_in: endpoint {
156				remote-endpoint = <&display_out>;
157			};
158		};
159	};
160
161	sound {
162		compatible = "fsl,imx7d-evk-wm8960",
163			     "fsl,imx-audio-wm8960";
164		model = "wm8960-audio";
165		audio-cpu = <&sai1>;
166		audio-codec = <&codec>;
167		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
168		audio-routing =
169			"Headphone Jack", "HP_L",
170			"Headphone Jack", "HP_R",
171			"Ext Spk", "SPK_LP",
172			"Ext Spk", "SPK_LN",
173			"Ext Spk", "SPK_RP",
174			"Ext Spk", "SPK_RN",
175			"LINPUT1", "AMIC",
176			"AMIC", "MICB";
177	};
178
179	sound-hdmi {
180		compatible = "fsl,imx-audio-sii902x";
181		model = "sii902x-audio";
182		audio-cpu = <&sai3>;
183		hdmi-out;
184	};
185};
186
187&adc1 {
188	vref-supply = <&reg_vref_1v8>;
189	status = "okay";
190};
191
192&adc2 {
193	vref-supply = <&reg_vref_1v8>;
194	status = "okay";
195};
196
197&cpu0 {
198	cpu-supply = <&sw1a_reg>;
199};
200
201&cpu1 {
202	cpu-supply = <&sw1a_reg>;
203};
204
205&ecspi3 {
206	pinctrl-names = "default";
207	pinctrl-0 = <&pinctrl_ecspi3>;
208	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
209	status = "okay";
210
211	tsc2046@0 {
212		compatible = "ti,tsc2046";
213		reg = <0>;
214		spi-max-frequency = <1000000>;
215		pinctrl-names = "default";
216		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
217		interrupt-parent = <&gpio2>;
218		interrupts = <29 0>;
219		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
220		touchscreen-max-pressure = <255>;
221		wakeup-source;
222	};
223};
224
225&fec1 {
226	pinctrl-names = "default";
227	pinctrl-0 = <&pinctrl_enet1>;
228	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
229			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
230	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
231	assigned-clock-rates = <0>, <100000000>;
232	phy-mode = "rgmii";
233	phy-handle = <&ethphy0>;
234	fsl,magic-packet;
235	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
236	status = "okay";
237
238	mdio {
239		#address-cells = <1>;
240		#size-cells = <0>;
241
242		ethphy0: ethernet-phy@0 {
243			reg = <0>;
244		};
245
246		ethphy1: ethernet-phy@1 {
247			reg = <1>;
248		};
249	};
250};
251
252&fec2 {
253	pinctrl-names = "default";
254	pinctrl-0 = <&pinctrl_enet2>;
255	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
256			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
257	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
258	assigned-clock-rates = <0>, <100000000>;
259	phy-mode = "rgmii";
260	phy-handle = <&ethphy1>;
261	phy-supply = <&reg_fec2_3v3>;
262	fsl,magic-packet;
263	status = "okay";
264};
265
266&flexcan2 {
267	pinctrl-names = "default";
268	pinctrl-0 = <&pinctrl_flexcan2>;
269	xceiver-supply = <&reg_can2_3v3>;
270	status = "okay";
271};
272
273&i2c1 {
274	pinctrl-names = "default";
275	pinctrl-0 = <&pinctrl_i2c1>;
276	status = "okay";
277
278	pmic: pmic@8 {
279		compatible = "fsl,pfuze3000";
280		reg = <0x08>;
281
282		regulators {
283			sw1a_reg: sw1a {
284				regulator-min-microvolt = <700000>;
285				regulator-max-microvolt = <1475000>;
286				regulator-boot-on;
287				regulator-always-on;
288				regulator-ramp-delay = <6250>;
289			};
290
291			/* use sw1c_reg to align with pfuze100/pfuze200 */
292			sw1c_reg: sw1b {
293				regulator-min-microvolt = <700000>;
294				regulator-max-microvolt = <1475000>;
295				regulator-boot-on;
296				regulator-always-on;
297				regulator-ramp-delay = <6250>;
298			};
299
300			sw2_reg: sw2 {
301				regulator-min-microvolt = <1800000>;
302				regulator-max-microvolt = <1800000>;
303				regulator-boot-on;
304				regulator-always-on;
305			};
306
307			sw3a_reg: sw3 {
308				regulator-min-microvolt = <900000>;
309				regulator-max-microvolt = <1650000>;
310				regulator-boot-on;
311				regulator-always-on;
312			};
313
314			swbst_reg: swbst {
315				regulator-min-microvolt = <5000000>;
316				regulator-max-microvolt = <5150000>;
317			};
318
319			snvs_reg: vsnvs {
320				regulator-min-microvolt = <1000000>;
321				regulator-max-microvolt = <3000000>;
322				regulator-boot-on;
323				regulator-always-on;
324			};
325
326			vref_reg: vrefddr {
327				regulator-boot-on;
328				regulator-always-on;
329			};
330
331			vgen1_reg: vldo1 {
332				regulator-min-microvolt = <1800000>;
333				regulator-max-microvolt = <3300000>;
334				regulator-always-on;
335			};
336
337			vgen2_reg: vldo2 {
338				regulator-min-microvolt = <800000>;
339				regulator-max-microvolt = <1550000>;
340			};
341
342			vgen3_reg: vccsd {
343				regulator-min-microvolt = <2850000>;
344				regulator-max-microvolt = <3300000>;
345				regulator-always-on;
346			};
347
348			vgen4_reg: v33 {
349				regulator-min-microvolt = <2850000>;
350				regulator-max-microvolt = <3300000>;
351				regulator-always-on;
352			};
353
354			vgen5_reg: vldo3 {
355				regulator-min-microvolt = <1800000>;
356				regulator-max-microvolt = <3300000>;
357				regulator-always-on;
358			};
359
360			vgen6_reg: vldo4 {
361				regulator-min-microvolt = <2800000>;
362				regulator-max-microvolt = <2800000>;
363				regulator-always-on;
364			};
365		};
366	};
367};
368
369&i2c2 {
370	pinctrl-names = "default";
371	pinctrl-0 = <&pinctrl_i2c2>;
372	status = "okay";
373
374	mpl3115@60 {
375		compatible = "fsl,mpl3115";
376		reg = <0x60>;
377	};
378};
379
380&i2c3 {
381	pinctrl-names = "default";
382	pinctrl-0 = <&pinctrl_i2c3>;
383	status = "okay";
384};
385
386&i2c4 {
387	pinctrl-names = "default";
388	pinctrl-0 = <&pinctrl_i2c4>;
389	status = "okay";
390
391	codec: wm8960@1a {
392		compatible = "wlf,wm8960";
393		reg = <0x1a>;
394		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
395		clock-names = "mclk";
396		wlf,shared-lrclk;
397		wlf,hp-cfg = <2 2 3>;
398		wlf,gpio-cfg = <1 3>;
399		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
400				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
401				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
402		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
403		assigned-clock-rates = <0>, <884736000>, <12288000>;
404	};
405};
406
407&lcdif {
408	pinctrl-names = "default";
409	pinctrl-0 = <&pinctrl_lcdif>;
410	status = "okay";
411
412	port {
413		display_out: endpoint {
414			remote-endpoint = <&panel_in>;
415		};
416	};
417};
418
419&pcie {
420	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
421	status = "okay";
422};
423
424&reg_1p0d {
425	vin-supply = <&sw2_reg>;
426};
427
428&reg_1p2 {
429	vin-supply = <&sw2_reg>;
430};
431
432&sai1 {
433	pinctrl-names = "default";
434	pinctrl-0 = <&pinctrl_sai1>;
435	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
436			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
437			  <&clks IMX7D_SAI1_ROOT_CLK>;
438	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
439	assigned-clock-rates = <0>, <884736000>, <36864000>;
440	status = "okay";
441};
442
443&sai3 {
444	pinctrl-names = "default";
445	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
446	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
447			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
448			  <&clks IMX7D_SAI3_ROOT_CLK>;
449	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
450	assigned-clock-rates = <0>, <884736000>, <36864000>;
451	status = "okay";
452};
453
454&snvs_pwrkey {
455	status = "okay";
456};
457
458&uart1 {
459	pinctrl-names = "default";
460	pinctrl-0 = <&pinctrl_uart1>;
461	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
462	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
463	status = "okay";
464};
465
466&uart6 {
467	pinctrl-names = "default";
468	pinctrl-0 = <&pinctrl_uart6>;
469	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
470	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
471	uart-has-rtscts;
472	status = "okay";
473};
474
475&usbotg1 {
476	vbus-supply = <&reg_usb_otg1_vbus>;
477	status = "okay";
478};
479
480&usbotg2 {
481	vbus-supply = <&reg_usb_otg2_vbus>;
482	dr_mode = "host";
483	status = "okay";
484};
485
486&usdhc1 {
487	pinctrl-names = "default", "state_100mhz", "state_200mhz";
488	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
489	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
490	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
491	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
492	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
493	vmmc-supply = <&reg_sd1_vmmc>;
494	wakeup-source;
495	keep-power-in-suspend;
496	status = "okay";
497};
498
499&usdhc2 {
500	pinctrl-names = "default", "state_100mhz", "state_200mhz";
501	pinctrl-0 = <&pinctrl_usdhc2>;
502	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
503	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
504	wakeup-source;
505	keep-power-in-suspend;
506	non-removable;
507	vmmc-supply = <&reg_brcm>;
508	fsl,tuning-step = <2>;
509	status = "okay";
510};
511
512&usdhc3 {
513	pinctrl-names = "default", "state_100mhz", "state_200mhz";
514	pinctrl-0 = <&pinctrl_usdhc3>;
515	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
516	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
517	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
518	assigned-clock-rates = <400000000>;
519	bus-width = <8>;
520	fsl,tuning-step = <2>;
521	non-removable;
522	status = "okay";
523};
524
525&wdog1 {
526	pinctrl-names = "default";
527	pinctrl-0 = <&pinctrl_wdog>;
528	fsl,ext-reset-output;
529};
530
531&iomuxc {
532	pinctrl-names = "default";
533	pinctrl-0 = <&pinctrl_hog>;
534
535	imx7d-sdb {
536		pinctrl_brcm_reg: brcmreggrp {
537			fsl,pins = <
538				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
539			>;
540		};
541
542		pinctrl_ecspi3: ecspi3grp {
543			fsl,pins = <
544				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
545				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
546				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
547				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
548			>;
549		};
550
551		pinctrl_enet1: enet1grp {
552			fsl,pins = <
553				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
554				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
555				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
556				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
557				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
558				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
559				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
560				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
561				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
562				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
563				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
564				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
565				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
566				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
567			>;
568		};
569
570		pinctrl_enet2: enet2grp {
571			fsl,pins = <
572				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
573				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
574				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
575				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
576				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
577				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
578				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
579				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
580				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
581				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
582				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
583				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
584			>;
585		};
586
587		pinctrl_enet2_reg: enet2reggrp {
588			fsl,pins = <
589				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
590			>;
591		};
592
593		pinctrl_flexcan2: flexcan2grp {
594			fsl,pins = <
595				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
596				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
597			>;
598		};
599
600		pinctrl_flexcan2_reg: flexcan2reggrp {
601			fsl,pins = <
602				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
603			>;
604		};
605
606		pinctrl_gpio_keys: gpio_keysgrp {
607			fsl,pins = <
608				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
609				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
610			>;
611		};
612
613		pinctrl_hog: hoggrp {
614			fsl,pins = <
615				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
616				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
617			>;
618		};
619
620		pinctrl_i2c1: i2c1grp {
621			fsl,pins = <
622				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
623				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
624			>;
625		};
626
627		pinctrl_i2c2: i2c2grp {
628			fsl,pins = <
629				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
630				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
631			>;
632		};
633
634		pinctrl_i2c3: i2c3grp {
635			fsl,pins = <
636				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
637				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
638			>;
639		};
640
641		pinctrl_i2c4: i2c4grp {
642			fsl,pins = <
643				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
644				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
645			>;
646		};
647
648		pinctrl_lcdif: lcdifgrp {
649			fsl,pins = <
650				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
651				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
652				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
653				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
654				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
655				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
656				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
657				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
658				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
659				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
660				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
661				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
662				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
663				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
664				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
665				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
666				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
667				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
668				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
669				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
670				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
671				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
672				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
673				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
674				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
675				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
676				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
677				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
678				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
679			>;
680		};
681
682		pinctrl_sai1: sai1grp {
683			fsl,pins = <
684				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
685				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
686				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
687				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
688				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
689			>;
690		};
691
692		pinctrl_sai2: sai2grp {
693			fsl,pins = <
694				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
695				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
696				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
697				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
698			>;
699		};
700
701		pinctrl_sai3: sai3grp {
702			fsl,pins = <
703				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
704				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
705				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
706			>;
707		};
708
709		pinctrl_spi4: spi4grp {
710			fsl,pins = <
711				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
712				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
713				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
714			>;
715		};
716
717		pinctrl_tsc2046_pendown: tsc2046_pendown {
718			fsl,pins = <
719				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
720			>;
721		};
722
723		pinctrl_uart1: uart1grp {
724			fsl,pins = <
725				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
726				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
727			>;
728		};
729
730		pinctrl_uart5: uart5grp {
731			fsl,pins = <
732				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
733				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
734				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
735				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
736			>;
737		};
738
739		pinctrl_uart6: uart6grp {
740			fsl,pins = <
741				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
742				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
743				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
744				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
745			>;
746		};
747
748		pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
749			fsl,pins = <
750				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
751				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
752				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
753				MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
754			>;
755		};
756
757		pinctrl_usdhc1: usdhc1grp {
758			fsl,pins = <
759				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
760				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
761				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
762				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
763				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
764				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
765			>;
766		};
767
768		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
769			fsl,pins = <
770				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
771				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
772				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
773				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
774				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
775				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
776			>;
777		};
778
779		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
780			fsl,pins = <
781				MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
782				MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
783				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
784				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
785				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
786				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
787			>;
788		};
789
790		pinctrl_usdhc2: usdhc2grp {
791			fsl,pins = <
792				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
793				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
794				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
795				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
796				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
797				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
798			>;
799		};
800
801		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
802			fsl,pins = <
803				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
804				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
805				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
806				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
807				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
808				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
809			>;
810		};
811
812		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
813			fsl,pins = <
814				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
815				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
816				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
817				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
818				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
819				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
820			>;
821		};
822
823
824		pinctrl_usdhc3: usdhc3grp {
825			fsl,pins = <
826				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
827				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
828				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
829				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
830				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
831				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
832				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
833				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
834				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
835				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
836				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
837			>;
838		};
839
840		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
841			fsl,pins = <
842				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
843				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
844				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
845				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
846				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
847				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
848				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
849				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
850				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
851				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
852				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
853			>;
854		};
855
856		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
857			fsl,pins = <
858				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
859				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
860				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
861				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
862				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
863				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
864				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
865				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
866				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
867				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
868				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
869			>;
870		};
871	};
872};
873
874&pwm1 {
875	pinctrl-names = "default";
876	pinctrl-0 = <&pinctrl_pwm1>;
877	status = "okay";
878};
879
880&iomuxc_lpsr {
881	pinctrl_wdog: wdoggrp {
882		fsl,pins = <
883			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
884		>;
885	};
886
887	pinctrl_pwm1: pwm1grp {
888		fsl,pins = <
889			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
890		>;
891	};
892
893	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
894		fsl,pins = <
895			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
896		>;
897	};
898
899	pinctrl_sai3_mclk: sai3grp_mclk {
900		fsl,pins = <
901			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
902		>;
903	};
904};
905