1// SPDX-License-Identifier: (GPL-2.0 OR MIT) 2/* 3 * Copyright 2016 Freescale Semiconductor, Inc. 4 * Copyright 2017-2018 NXP. 5 * 6 */ 7 8#include <dt-bindings/clock/imx6sll-clock.h> 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/interrupt-controller/arm-gic.h> 11#include "imx6sll-pinfunc.h" 12 13/ { 14 #address-cells = <1>; 15 #size-cells = <1>; 16 17 aliases { 18 gpio0 = &gpio1; 19 gpio1 = &gpio2; 20 gpio2 = &gpio3; 21 gpio3 = &gpio4; 22 gpio4 = &gpio5; 23 gpio5 = &gpio6; 24 i2c0 = &i2c1; 25 i2c1 = &i2c2; 26 i2c2 = &i2c3; 27 mmc0 = &usdhc1; 28 mmc1 = &usdhc2; 29 mmc2 = &usdhc3; 30 serial0 = &uart1; 31 serial1 = &uart2; 32 serial2 = &uart3; 33 serial3 = &uart4; 34 serial4 = &uart5; 35 spi0 = &ecspi1; 36 spi1 = &ecspi2; 37 spi3 = &ecspi3; 38 spi4 = &ecspi4; 39 usb0 = &usbotg1; 40 usb1 = &usbotg2; 41 usbphy0 = &usbphy1; 42 usbphy1 = &usbphy2; 43 }; 44 45 cpus { 46 #address-cells = <1>; 47 #size-cells = <0>; 48 49 cpu0: cpu@0 { 50 compatible = "arm,cortex-a9"; 51 device_type = "cpu"; 52 reg = <0>; 53 next-level-cache = <&L2>; 54 operating-points = 55 /* kHz uV */ 56 <996000 1275000>, 57 <792000 1175000>, 58 <396000 1075000>, 59 <198000 975000>; 60 fsl,soc-operating-points = 61 /* ARM kHz SOC-PU uV */ 62 <996000 1175000>, 63 <792000 1175000>, 64 <396000 1175000>, 65 <198000 1175000>; 66 clock-latency = <61036>; /* two CLK32 periods */ 67 #cooling-cells = <2>; 68 clocks = <&clks IMX6SLL_CLK_ARM>, 69 <&clks IMX6SLL_CLK_PLL2_PFD2>, 70 <&clks IMX6SLL_CLK_STEP>, 71 <&clks IMX6SLL_CLK_PLL1_SW>, 72 <&clks IMX6SLL_CLK_PLL1_SYS>; 73 clock-names = "arm", "pll2_pfd2_396m", "step", 74 "pll1_sw", "pll1_sys"; 75 nvmem-cells = <&cpu_speed_grade>; 76 nvmem-cell-names = "speed_grade"; 77 }; 78 }; 79 80 ckil: clock-ckil { 81 compatible = "fixed-clock"; 82 #clock-cells = <0>; 83 clock-frequency = <32768>; 84 clock-output-names = "ckil"; 85 }; 86 87 osc: clock-osc-24m { 88 compatible = "fixed-clock"; 89 #clock-cells = <0>; 90 clock-frequency = <24000000>; 91 clock-output-names = "osc"; 92 }; 93 94 ipp_di0: clock-ipp-di0 { 95 compatible = "fixed-clock"; 96 #clock-cells = <0>; 97 clock-frequency = <0>; 98 clock-output-names = "ipp_di0"; 99 }; 100 101 ipp_di1: clock-ipp-di1 { 102 compatible = "fixed-clock"; 103 #clock-cells = <0>; 104 clock-frequency = <0>; 105 clock-output-names = "ipp_di1"; 106 }; 107 108 soc { 109 #address-cells = <1>; 110 #size-cells = <1>; 111 compatible = "simple-bus"; 112 interrupt-parent = <&gpc>; 113 ranges; 114 115 ocram: sram@900000 { 116 compatible = "mmio-sram"; 117 reg = <0x00900000 0x20000>; 118 ranges = <0 0x00900000 0x20000>; 119 #address-cells = <1>; 120 #size-cells = <1>; 121 }; 122 123 intc: interrupt-controller@a01000 { 124 compatible = "arm,cortex-a9-gic"; 125 #interrupt-cells = <3>; 126 interrupt-controller; 127 reg = <0x00a01000 0x1000>, 128 <0x00a00100 0x100>; 129 interrupt-parent = <&intc>; 130 }; 131 132 L2: cache-controller@a02000 { 133 compatible = "arm,pl310-cache"; 134 reg = <0x00a02000 0x1000>; 135 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; 136 cache-unified; 137 cache-level = <2>; 138 arm,tag-latency = <4 2 3>; 139 arm,data-latency = <4 2 3>; 140 }; 141 142 aips1: bus@2000000 { 143 compatible = "fsl,aips-bus", "simple-bus"; 144 #address-cells = <1>; 145 #size-cells = <1>; 146 reg = <0x02000000 0x100000>; 147 ranges; 148 149 spba: spba-bus@2000000 { 150 compatible = "fsl,spba-bus", "simple-bus"; 151 #address-cells = <1>; 152 #size-cells = <1>; 153 reg = <0x02000000 0x40000>; 154 ranges; 155 156 spdif: spdif@2004000 { 157 compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; 158 reg = <0x02004000 0x4000>; 159 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; 160 dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; 161 dma-names = "rx", "tx"; 162 clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, 163 <&clks IMX6SLL_CLK_OSC>, 164 <&clks IMX6SLL_CLK_SPDIF>, 165 <&clks IMX6SLL_CLK_DUMMY>, 166 <&clks IMX6SLL_CLK_DUMMY>, 167 <&clks IMX6SLL_CLK_DUMMY>, 168 <&clks IMX6SLL_CLK_IPG>, 169 <&clks IMX6SLL_CLK_DUMMY>, 170 <&clks IMX6SLL_CLK_DUMMY>, 171 <&clks IMX6SLL_CLK_SPBA>; 172 clock-names = "core", "rxtx0", 173 "rxtx1", "rxtx2", 174 "rxtx3", "rxtx4", 175 "rxtx5", "rxtx6", 176 "rxtx7", "dma"; 177 status = "disabled"; 178 }; 179 180 ecspi1: spi@2008000 { 181 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; 182 reg = <0x02008000 0x4000>; 183 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 184 dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; 185 dma-names = "rx", "tx"; 186 clocks = <&clks IMX6SLL_CLK_ECSPI1>, 187 <&clks IMX6SLL_CLK_ECSPI1>; 188 clock-names = "ipg", "per"; 189 status = "disabled"; 190 }; 191 192 ecspi2: spi@200c000 { 193 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; 194 reg = <0x0200c000 0x4000>; 195 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 196 dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; 197 dma-names = "rx", "tx"; 198 clocks = <&clks IMX6SLL_CLK_ECSPI2>, 199 <&clks IMX6SLL_CLK_ECSPI2>; 200 clock-names = "ipg", "per"; 201 status = "disabled"; 202 }; 203 204 ecspi3: spi@2010000 { 205 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; 206 reg = <0x02010000 0x4000>; 207 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 208 dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; 209 dma-names = "rx", "tx"; 210 clocks = <&clks IMX6SLL_CLK_ECSPI3>, 211 <&clks IMX6SLL_CLK_ECSPI3>; 212 clock-names = "ipg", "per"; 213 status = "disabled"; 214 }; 215 216 ecspi4: spi@2014000 { 217 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; 218 reg = <0x02014000 0x4000>; 219 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 220 dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; 221 dma-names = "rx", "tx"; 222 clocks = <&clks IMX6SLL_CLK_ECSPI4>, 223 <&clks IMX6SLL_CLK_ECSPI4>; 224 clock-names = "ipg", "per"; 225 status = "disabled"; 226 }; 227 228 uart4: serial@2018000 { 229 compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", 230 "fsl,imx21-uart"; 231 reg = <0x02018000 0x4000>; 232 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 233 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; 234 dma-names = "rx", "tx"; 235 clocks = <&clks IMX6SLL_CLK_UART4_IPG>, 236 <&clks IMX6SLL_CLK_UART4_SERIAL>; 237 clock-names = "ipg", "per"; 238 status = "disabled"; 239 }; 240 241 uart1: serial@2020000 { 242 compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", 243 "fsl,imx21-uart"; 244 reg = <0x02020000 0x4000>; 245 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 246 dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; 247 dma-names = "rx", "tx"; 248 clocks = <&clks IMX6SLL_CLK_UART1_IPG>, 249 <&clks IMX6SLL_CLK_UART1_SERIAL>; 250 clock-names = "ipg", "per"; 251 status = "disabled"; 252 }; 253 254 uart2: serial@2024000 { 255 compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", 256 "fsl,imx21-uart"; 257 reg = <0x02024000 0x4000>; 258 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 259 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; 260 dma-names = "rx", "tx"; 261 clocks = <&clks IMX6SLL_CLK_UART2_IPG>, 262 <&clks IMX6SLL_CLK_UART2_SERIAL>; 263 clock-names = "ipg", "per"; 264 status = "disabled"; 265 }; 266 267 ssi1: ssi@2028000 { 268 compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; 269 reg = <0x02028000 0x4000>; 270 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; 271 dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; 272 dma-names = "rx", "tx"; 273 fsl,fifo-depth = <15>; 274 clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, 275 <&clks IMX6SLL_CLK_SSI1>; 276 clock-names = "ipg", "baud"; 277 status = "disabled"; 278 }; 279 280 ssi2: ssi@202c000 { 281 compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; 282 reg = <0x0202c000 0x4000>; 283 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 284 dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; 285 dma-names = "rx", "tx"; 286 fsl,fifo-depth = <15>; 287 clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, 288 <&clks IMX6SLL_CLK_SSI2>; 289 clock-names = "ipg", "baud"; 290 status = "disabled"; 291 }; 292 293 ssi3: ssi@2030000 { 294 compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; 295 reg = <0x02030000 0x4000>; 296 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; 297 dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; 298 dma-names = "rx", "tx"; 299 fsl,fifo-depth = <15>; 300 clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, 301 <&clks IMX6SLL_CLK_SSI3>; 302 clock-names = "ipg", "baud"; 303 status = "disabled"; 304 }; 305 306 uart3: serial@2034000 { 307 compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", 308 "fsl,imx21-uart"; 309 reg = <0x02034000 0x4000>; 310 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 311 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; 312 dma-name = "rx", "tx"; 313 clocks = <&clks IMX6SLL_CLK_UART3_IPG>, 314 <&clks IMX6SLL_CLK_UART3_SERIAL>; 315 clock-names = "ipg", "per"; 316 status = "disabled"; 317 }; 318 }; 319 320 pwm1: pwm@2080000 { 321 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; 322 reg = <0x02080000 0x4000>; 323 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 324 clocks = <&clks IMX6SLL_CLK_PWM1>, 325 <&clks IMX6SLL_CLK_PWM1>; 326 clock-names = "ipg", "per"; 327 #pwm-cells = <3>; 328 }; 329 330 pwm2: pwm@2084000 { 331 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; 332 reg = <0x02084000 0x4000>; 333 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 334 clocks = <&clks IMX6SLL_CLK_PWM2>, 335 <&clks IMX6SLL_CLK_PWM2>; 336 clock-names = "ipg", "per"; 337 #pwm-cells = <3>; 338 }; 339 340 pwm3: pwm@2088000 { 341 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; 342 reg = <0x02088000 0x4000>; 343 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 344 clocks = <&clks IMX6SLL_CLK_PWM3>, 345 <&clks IMX6SLL_CLK_PWM3>; 346 clock-names = "ipg", "per"; 347 #pwm-cells = <3>; 348 }; 349 350 pwm4: pwm@208c000 { 351 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; 352 reg = <0x0208c000 0x4000>; 353 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 354 clocks = <&clks IMX6SLL_CLK_PWM4>, 355 <&clks IMX6SLL_CLK_PWM4>; 356 clock-names = "ipg", "per"; 357 #pwm-cells = <3>; 358 }; 359 360 gpt1: timer@2098000 { 361 compatible = "fsl,imx6sl-gpt"; 362 reg = <0x02098000 0x4000>; 363 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 364 clocks = <&clks IMX6SLL_CLK_GPT_BUS>, 365 <&clks IMX6SLL_CLK_GPT_SERIAL>; 366 clock-names = "ipg", "per"; 367 }; 368 369 gpio1: gpio@209c000 { 370 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 371 reg = <0x0209c000 0x4000>; 372 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 373 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 374 clocks = <&clks IMX6SLL_CLK_GPIO1>; 375 gpio-controller; 376 #gpio-cells = <2>; 377 interrupt-controller; 378 #interrupt-cells = <2>; 379 gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; 380 }; 381 382 gpio2: gpio@20a0000 { 383 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 384 reg = <0x020a0000 0x4000>; 385 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 386 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 387 clocks = <&clks IMX6SLL_CLK_GPIO2>; 388 gpio-controller; 389 #gpio-cells = <2>; 390 interrupt-controller; 391 #interrupt-cells = <2>; 392 gpio-ranges = <&iomuxc 0 50 32>; 393 }; 394 395 gpio3: gpio@20a4000 { 396 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 397 reg = <0x020a4000 0x4000>; 398 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 399 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 400 clocks = <&clks IMX6SLL_CLK_GPIO3>; 401 gpio-controller; 402 #gpio-cells = <2>; 403 interrupt-controller; 404 #interrupt-cells = <2>; 405 gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, 406 <&iomuxc 16 101 2>, <&iomuxc 18 5 1>, 407 <&iomuxc 21 6 11>; 408 }; 409 410 gpio4: gpio@20a8000 { 411 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 412 reg = <0x020a8000 0x4000>; 413 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 414 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 415 clocks = <&clks IMX6SLL_CLK_GPIO4>; 416 gpio-controller; 417 #gpio-cells = <2>; 418 interrupt-controller; 419 #interrupt-cells = <2>; 420 gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, 421 <&iomuxc 16 151 1>, <&iomuxc 17 149 1>, 422 <&iomuxc 18 146 1>, <&iomuxc 19 144 1>, 423 <&iomuxc 20 142 1>, <&iomuxc 21 143 1>, 424 <&iomuxc 22 150 1>, <&iomuxc 23 148 1>, 425 <&iomuxc 24 147 1>, <&iomuxc 25 145 1>, 426 <&iomuxc 26 152 1>, <&iomuxc 27 125 1>, 427 <&iomuxc 28 131 1>, <&iomuxc 29 134 1>, 428 <&iomuxc 30 129 1>, <&iomuxc 31 133 1>; 429 }; 430 431 gpio5: gpio@20ac000 { 432 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 433 reg = <0x020ac000 0x4000>; 434 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, 435 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 436 clocks = <&clks IMX6SLL_CLK_GPIO5>; 437 gpio-controller; 438 #gpio-cells = <2>; 439 interrupt-controller; 440 #interrupt-cells = <2>; 441 gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, 442 <&iomuxc 2 132 1>, <&iomuxc 3 130 1>, 443 <&iomuxc 4 127 1>, <&iomuxc 5 126 1>, 444 <&iomuxc 6 120 1>, <&iomuxc 7 123 1>, 445 <&iomuxc 8 118 1>, <&iomuxc 9 122 1>, 446 <&iomuxc 10 124 1>, <&iomuxc 11 117 1>, 447 <&iomuxc 12 121 1>, <&iomuxc 13 119 1>, 448 <&iomuxc 14 116 1>, <&iomuxc 15 115 1>, 449 <&iomuxc 16 140 2>, <&iomuxc 18 136 1>, 450 <&iomuxc 19 138 1>, <&iomuxc 20 139 1>, 451 <&iomuxc 21 137 1>; 452 }; 453 454 gpio6: gpio@20b0000 { 455 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; 456 reg = <0x020b0000 0x4000>; 457 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 458 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 459 clocks = <&clks IMX6SLL_CLK_GPIO6>; 460 gpio-controller; 461 #gpio-cells = <2>; 462 interrupt-controller; 463 #interrupt-cells = <2>; 464 }; 465 466 kpp: keypad@20b8000 { 467 compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; 468 reg = <0x020b8000 0x4000>; 469 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 470 clocks = <&clks IMX6SLL_CLK_KPP>; 471 status = "disabled"; 472 }; 473 474 wdog1: watchdog@20bc000 { 475 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; 476 reg = <0x020bc000 0x4000>; 477 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 478 clocks = <&clks IMX6SLL_CLK_WDOG1>; 479 }; 480 481 wdog2: watchdog@20c0000 { 482 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; 483 reg = <0x020c0000 0x4000>; 484 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 485 clocks = <&clks IMX6SLL_CLK_WDOG2>; 486 status = "disabled"; 487 }; 488 489 clks: clock-controller@20c4000 { 490 compatible = "fsl,imx6sll-ccm"; 491 reg = <0x020c4000 0x4000>; 492 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, 493 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 494 #clock-cells = <1>; 495 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; 496 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; 497 498 assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; 499 assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; 500 }; 501 502 anatop: anatop@20c8000 { 503 compatible = "fsl,imx6sll-anatop", 504 "fsl,imx6q-anatop", 505 "syscon", "simple-mfd"; 506 reg = <0x020c8000 0x4000>; 507 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, 508 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, 509 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; 510 #address-cells = <1>; 511 #size-cells = <0>; 512 513 reg_3p0: regulator-3p0@20c8120 { 514 compatible = "fsl,anatop-regulator"; 515 reg = <0x20c8120>; 516 regulator-name = "vdd3p0"; 517 regulator-min-microvolt = <2625000>; 518 regulator-max-microvolt = <3400000>; 519 anatop-reg-offset = <0x120>; 520 anatop-vol-bit-shift = <8>; 521 anatop-vol-bit-width = <5>; 522 anatop-min-bit-val = <0>; 523 anatop-min-voltage = <2625000>; 524 anatop-max-voltage = <3400000>; 525 anatop-enable-bit = <0>; 526 }; 527 528 tempmon: temperature-sensor { 529 compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; 530 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; 531 interrupt-parent = <&gpc>; 532 fsl,tempmon = <&anatop>; 533 nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; 534 nvmem-cell-names = "calib", "temp_grade"; 535 clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; 536 }; 537 }; 538 539 usbphy1: usb-phy@20c9000 { 540 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", 541 "fsl,imx23-usbphy"; 542 reg = <0x020c9000 0x1000>; 543 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 544 clocks = <&clks IMX6SLL_CLK_USBPHY1>; 545 phy-3p0-supply = <®_3p0>; 546 fsl,anatop = <&anatop>; 547 }; 548 549 usbphy2: usb-phy@20ca000 { 550 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", 551 "fsl,imx23-usbphy"; 552 reg = <0x020ca000 0x1000>; 553 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 554 clocks = <&clks IMX6SLL_CLK_USBPHY2>; 555 phy-reg_3p0-supply = <®_3p0>; 556 fsl,anatop = <&anatop>; 557 }; 558 559 snvs: snvs@20cc000 { 560 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; 561 reg = <0x020cc000 0x4000>; 562 563 snvs_rtc: snvs-rtc-lp { 564 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 565 regmap = <&snvs>; 566 offset = <0x34>; 567 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 568 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 569 }; 570 571 snvs_poweroff: snvs-poweroff { 572 compatible = "syscon-poweroff"; 573 regmap = <&snvs>; 574 offset = <0x38>; 575 mask = <0x61>; 576 status = "disabled"; 577 }; 578 579 snvs_pwrkey: snvs-powerkey { 580 compatible = "fsl,sec-v4.0-pwrkey"; 581 regmap = <&snvs>; 582 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 583 linux,keycode = <KEY_POWER>; 584 wakeup-source; 585 status = "disabled"; 586 }; 587 }; 588 589 src: reset-controller@20d8000 { 590 compatible = "fsl,imx6sll-src", "fsl,imx51-src"; 591 reg = <0x020d8000 0x4000>; 592 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, 593 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 594 #reset-cells = <1>; 595 }; 596 597 gpc: interrupt-controller@20dc000 { 598 compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; 599 reg = <0x020dc000 0x4000>; 600 interrupt-controller; 601 #interrupt-cells = <3>; 602 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 603 interrupt-parent = <&intc>; 604 }; 605 606 iomuxc: pinctrl@20e0000 { 607 compatible = "fsl,imx6sll-iomuxc"; 608 reg = <0x020e0000 0x4000>; 609 }; 610 611 gpr: iomuxc-gpr@20e4000 { 612 compatible = "fsl,imx6sll-iomuxc-gpr", 613 "fsl,imx6q-iomuxc-gpr", "syscon"; 614 reg = <0x020e4000 0x4000>; 615 }; 616 617 csi: csi@20e8000 { 618 compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; 619 reg = <0x020e8000 0x4000>; 620 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 621 clocks = <&clks IMX6SLL_CLK_DUMMY>, 622 <&clks IMX6SLL_CLK_CSI>, 623 <&clks IMX6SLL_CLK_DUMMY>; 624 clock-names = "disp-axi", "csi_mclk", "disp_dcic"; 625 status = "disabled"; 626 }; 627 628 sdma: dma-controller@20ec000 { 629 compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma"; 630 reg = <0x020ec000 0x4000>; 631 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 632 clocks = <&clks IMX6SLL_CLK_IPG>, 633 <&clks IMX6SLL_CLK_SDMA>; 634 clock-names = "ipg", "ahb"; 635 #dma-cells = <3>; 636 iram = <&ocram>; 637 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; 638 }; 639 640 pxp: pxp@20f0000 { 641 compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp"; 642 reg = <0x20f0000 0x4000>; 643 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 644 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; 645 clocks = <&clks IMX6SLL_CLK_PXP>; 646 clock-names = "axi"; 647 }; 648 649 lcdif: lcd-controller@20f8000 { 650 compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; 651 reg = <0x020f8000 0x4000>; 652 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 653 clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, 654 <&clks IMX6SLL_CLK_LCDIF_APB>, 655 <&clks IMX6SLL_CLK_DUMMY>; 656 clock-names = "pix", "axi", "disp_axi"; 657 status = "disabled"; 658 }; 659 660 dcp: crypto@20fc000 { 661 compatible = "fsl,imx28-dcp"; 662 reg = <0x020fc000 0x4000>; 663 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 664 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, 665 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 666 clocks = <&clks IMX6SLL_CLK_DCP>; 667 clock-names = "dcp"; 668 }; 669 }; 670 671 aips2: bus@2100000 { 672 compatible = "fsl,aips-bus", "simple-bus"; 673 #address-cells = <1>; 674 #size-cells = <1>; 675 reg = <0x02100000 0x100000>; 676 ranges; 677 678 usbotg1: usb@2184000 { 679 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", 680 "fsl,imx27-usb"; 681 reg = <0x02184000 0x200>; 682 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; 683 clocks = <&clks IMX6SLL_CLK_USBOH3>; 684 fsl,usbphy = <&usbphy1>; 685 fsl,usbmisc = <&usbmisc 0>; 686 fsl,anatop = <&anatop>; 687 ahb-burst-config = <0x0>; 688 tx-burst-size-dword = <0x10>; 689 rx-burst-size-dword = <0x10>; 690 status = "disabled"; 691 }; 692 693 usbotg2: usb@2184200 { 694 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", 695 "fsl,imx27-usb"; 696 reg = <0x02184200 0x200>; 697 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; 698 clocks = <&clks IMX6SLL_CLK_USBOH3>; 699 fsl,usbphy = <&usbphy2>; 700 fsl,usbmisc = <&usbmisc 1>; 701 ahb-burst-config = <0x0>; 702 tx-burst-size-dword = <0x10>; 703 rx-burst-size-dword = <0x10>; 704 status = "disabled"; 705 }; 706 707 usbmisc: usbmisc@2184800 { 708 #index-cells = <1>; 709 compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", 710 "fsl,imx6q-usbmisc"; 711 reg = <0x02184800 0x200>; 712 }; 713 714 usdhc1: mmc@2190000 { 715 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; 716 reg = <0x02190000 0x4000>; 717 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 718 clocks = <&clks IMX6SLL_CLK_USDHC1>, 719 <&clks IMX6SLL_CLK_USDHC1>, 720 <&clks IMX6SLL_CLK_USDHC1>; 721 clock-names = "ipg", "ahb", "per"; 722 bus-width = <4>; 723 fsl,tuning-step = <2>; 724 fsl,tuning-start-tap = <20>; 725 status = "disabled"; 726 }; 727 728 usdhc2: mmc@2194000 { 729 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; 730 reg = <0x02194000 0x4000>; 731 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 732 clocks = <&clks IMX6SLL_CLK_USDHC2>, 733 <&clks IMX6SLL_CLK_USDHC2>, 734 <&clks IMX6SLL_CLK_USDHC2>; 735 clock-names = "ipg", "ahb", "per"; 736 bus-width = <4>; 737 fsl,tuning-step = <2>; 738 fsl,tuning-start-tap = <20>; 739 status = "disabled"; 740 }; 741 742 usdhc3: mmc@2198000 { 743 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; 744 reg = <0x02198000 0x4000>; 745 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 746 clocks = <&clks IMX6SLL_CLK_USDHC3>, 747 <&clks IMX6SLL_CLK_USDHC3>, 748 <&clks IMX6SLL_CLK_USDHC3>; 749 clock-names = "ipg", "ahb", "per"; 750 bus-width = <4>; 751 fsl,tuning-step = <2>; 752 fsl,tuning-start-tap = <20>; 753 status = "disabled"; 754 }; 755 756 i2c1: i2c@21a0000 { 757 #address-cells = <1>; 758 #size-cells = <0>; 759 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; 760 reg = <0x021a0000 0x4000>; 761 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 762 clocks = <&clks IMX6SLL_CLK_I2C1>; 763 status = "disabled"; 764 }; 765 766 i2c2: i2c@21a4000 { 767 #address-cells = <1>; 768 #size-cells = <0>; 769 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; 770 reg = <0x021a4000 0x4000>; 771 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 772 clocks = <&clks IMX6SLL_CLK_I2C2>; 773 status = "disabled"; 774 }; 775 776 i2c3: i2c@21a8000 { 777 #address-cells = <1>; 778 #size-cells = <0>; 779 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; 780 reg = <0x021a8000 0x4000>; 781 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 782 clocks = <&clks IMX6SLL_CLK_I2C3>; 783 status = "disabled"; 784 }; 785 786 mmdc: memory-controller@21b0000 { 787 compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; 788 reg = <0x021b0000 0x4000>; 789 clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; 790 }; 791 792 rngb: rng@21b4000 { 793 compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb"; 794 reg = <0x021b4000 0x4000>; 795 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 796 clocks = <&clks IMX6SLL_CLK_DUMMY>; 797 }; 798 799 ocotp: efuse@21bc000 { 800 #address-cells = <1>; 801 #size-cells = <1>; 802 compatible = "fsl,imx6sll-ocotp", "syscon"; 803 reg = <0x021bc000 0x4000>; 804 clocks = <&clks IMX6SLL_CLK_OCOTP>; 805 806 cpu_speed_grade: speed-grade@10 { 807 reg = <0x10 4>; 808 }; 809 810 tempmon_calib: calib@38 { 811 reg = <0x38 4>; 812 }; 813 814 tempmon_temp_grade: temp-grade@20 { 815 reg = <0x20 4>; 816 }; 817 }; 818 819 audmux: audmux@21d8000 { 820 compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; 821 reg = <0x021d8000 0x4000>; 822 status = "disabled"; 823 }; 824 825 uart5: serial@21f4000 { 826 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", 827 "fsl,imx21-uart"; 828 reg = <0x021f4000 0x4000>; 829 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 830 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; 831 dma-names = "rx", "tx"; 832 clocks = <&clks IMX6SLL_CLK_UART5_IPG>, 833 <&clks IMX6SLL_CLK_UART5_SERIAL>; 834 clock-names = "ipg", "per"; 835 status = "disabled"; 836 }; 837 }; 838 }; 839}; 840