1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (c) 2014 Protonic Holland
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8
9/ {
10	chosen {
11		stdout-path = &uart4;
12	};
13
14	reg_3v3: regulator-3v3 {
15		compatible = "regulator-fixed";
16		regulator-name = "3v3";
17		regulator-min-microvolt = <3300000>;
18		regulator-max-microvolt = <3300000>;
19	};
20
21	reg_usb_h1_vbus: regulator-h1-vbus {
22		compatible = "regulator-fixed";
23		regulator-name = "h1-vbus";
24		regulator-min-microvolt = <5000000>;
25		regulator-max-microvolt = <5000000>;
26	};
27
28	reg_usb_otg_vbus: regulator-otg-vbus {
29		compatible = "regulator-fixed";
30		regulator-name = "otg-vbus";
31		regulator-min-microvolt = <5000000>;
32		regulator-max-microvolt = <5000000>;
33		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
34		enable-active-high;
35	};
36};
37
38&can1 {
39	pinctrl-names = "default";
40	status = "okay";
41};
42
43&i2c1 {
44	clock-frequency = <100000>;
45	pinctrl-names = "default";
46	pinctrl-0 = <&pinctrl_i2c1>;
47	status = "okay";
48};
49
50&i2c3 {
51	clock-frequency = <100000>;
52	pinctrl-names = "default";
53	pinctrl-0 = <&pinctrl_i2c3>;
54	status = "okay";
55
56	temperature-sensor@70 {
57		compatible = "ti,tmp103";
58		reg = <0x70>;
59	};
60};
61
62&uart4 {
63	pinctrl-names = "default";
64	pinctrl-0 = <&pinctrl_uart4>;
65	status = "okay";
66};
67
68&usbh1 {
69	vbus-supply = <&reg_usb_h1_vbus>;
70	phy_type = "utmi";
71	dr_mode = "host";
72	disable-over-current;
73	status = "okay";
74};
75
76&usbotg {
77	vbus-supply = <&reg_usb_otg_vbus>;
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_usbotg>;
80	phy_type = "utmi";
81	dr_mode = "host";
82	over-current-active-low;
83	status = "okay";
84};
85
86&usbphynop1 {
87	status = "disabled";
88};
89
90&usbphynop2 {
91	status = "disabled";
92};
93
94&usdhc1 {
95	pinctrl-names = "default";
96	pinctrl-0 = <&pinctrl_usdhc1>;
97	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
98	status = "okay";
99};
100
101&usdhc3 {
102	pinctrl-names = "default";
103	pinctrl-0 = <&pinctrl_usdhc3>;
104	bus-width = <8>;
105	non-removable;
106	no-1-8-v;
107	no-sd;
108	no-sdio;
109	status = "okay";
110};
111
112&iomuxc {
113	pinctrl_can1: can1grp {
114		fsl,pins = <
115			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
116			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
117		>;
118	};
119
120	pinctrl_i2c1: i2c1grp {
121		fsl,pins = <
122			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
123			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
124		>;
125	};
126
127	pinctrl_i2c3: i2c3grp {
128		fsl,pins = <
129			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
130			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
131		>;
132	};
133
134	pinctrl_uart4: uart4grp {
135		fsl,pins = <
136			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
137			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
138		>;
139	};
140
141	pinctrl_usdhc1: usdhc1grp {
142		fsl,pins = <
143			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
144			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
145			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
146			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
147			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
148			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
149			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
150		>;
151	};
152
153	pinctrl_usdhc3: usdhc3grp {
154		fsl,pins = <
155			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
156			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
157			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
158			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
159			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
160			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
161			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
162			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
163			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
164			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
165			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
166		>;
167	};
168
169	pinctrl_usbotg: usbotggrp {
170		fsl,pins = <
171			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
172			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
173		>;
174	};
175};
176