1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright 2014-2022 Toradex 4 * Copyright 2012 Freescale Semiconductor, Inc. 5 * Copyright 2011 Linaro Ltd. 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/pwm/pwm.h> 10 11/ { 12 model = "Toradex Apalis iMX6Q/D Module"; 13 compatible = "toradex,apalis_imx6q", "fsl,imx6q"; 14 15 /* Will be filled by the bootloader */ 16 memory@10000000 { 17 device_type = "memory"; 18 reg = <0x10000000 0>; 19 }; 20 21 backlight: backlight { 22 compatible = "pwm-backlight"; 23 brightness-levels = <0 45 63 88 119 158 203 255>; 24 default-brightness-level = <4>; 25 enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&pinctrl_gpio_bl_on>; 28 power-supply = <®_module_3v3>; 29 pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>; 30 status = "disabled"; 31 }; 32 33 clk_ov5640_osc: clk-ov5640-osc { 34 compatible = "fixed-clock"; 35 #clock-cells = <0>; 36 clock-frequency = <24000000>; 37 }; 38 39 gpio-keys { 40 compatible = "gpio-keys"; 41 pinctrl-names = "default"; 42 pinctrl-0 = <&pinctrl_gpio_keys>; 43 44 key-wakeup { 45 debounce-interval = <10>; 46 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 47 label = "Wake-Up"; 48 linux,code = <KEY_WAKEUP>; 49 wakeup-source; 50 }; 51 }; 52 53 lcd_display: disp0 { 54 compatible = "fsl,imx-parallel-display"; 55 #address-cells = <1>; 56 #size-cells = <0>; 57 interface-pix-fmt = "rgb24"; 58 pinctrl-names = "default"; 59 pinctrl-0 = <&pinctrl_ipu1_lcdif>; 60 status = "disabled"; 61 62 port@0 { 63 reg = <0>; 64 65 lcd_display_in: endpoint { 66 remote-endpoint = <&ipu1_di1_disp1>; 67 }; 68 }; 69 70 port@1 { 71 reg = <1>; 72 73 lcd_display_out: endpoint { 74 remote-endpoint = <&lcd_panel_in>; 75 }; 76 }; 77 }; 78 79 panel_dpi: panel-dpi { 80 compatible = "edt,et057090dhu"; 81 backlight = <&backlight>; 82 83 status = "disabled"; 84 85 port { 86 lcd_panel_in: endpoint { 87 remote-endpoint = <&lcd_display_out>; 88 }; 89 }; 90 }; 91 92 panel_lvds: panel-lvds { 93 compatible = "panel-lvds"; 94 backlight = <&backlight>; 95 status = "disabled"; 96 97 port { 98 lvds_panel_in: endpoint { 99 remote-endpoint = <&lvds0_out>; 100 }; 101 }; 102 }; 103 104 reg_module_3v3: regulator-module-3v3 { 105 compatible = "regulator-fixed"; 106 regulator-always-on; 107 regulator-max-microvolt = <3300000>; 108 regulator-min-microvolt = <3300000>; 109 regulator-name = "+V3.3"; 110 }; 111 112 reg_module_3v3_audio: regulator-module-3v3-audio { 113 compatible = "regulator-fixed"; 114 regulator-always-on; 115 regulator-max-microvolt = <3300000>; 116 regulator-min-microvolt = <3300000>; 117 regulator-name = "+V3.3_AUDIO"; 118 }; 119 120 reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd { 121 compatible = "regulator-fixed"; 122 regulator-always-on; 123 regulator-max-microvolt = <1800000>; 124 regulator-min-microvolt = <1800000>; 125 regulator-name = "DOVDD/DVDD_1.8V"; 126 /* Note: The CSI module uses on-board 3.3V_SW supply */ 127 vin-supply = <®_module_3v3>; 128 }; 129 130 reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd { 131 compatible = "regulator-fixed"; 132 regulator-always-on; 133 regulator-max-microvolt = <2800000>; 134 regulator-min-microvolt = <2800000>; 135 regulator-name = "AVDD/AFVDD_2.8V"; 136 /* Note: The CSI module uses on-board 3.3V_SW supply */ 137 vin-supply = <®_module_3v3>; 138 }; 139 140 reg_usb_otg_vbus: regulator-usb-otg-vbus { 141 compatible = "regulator-fixed"; 142 enable-active-high; 143 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>; 146 regulator-max-microvolt = <5000000>; 147 regulator-min-microvolt = <5000000>; 148 regulator-name = "usb_otg_vbus"; 149 status = "disabled"; 150 }; 151 152 /* on module USB hub */ 153 reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub { 154 compatible = "regulator-fixed"; 155 enable-active-high; 156 gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>; 159 regulator-max-microvolt = <5000000>; 160 regulator-min-microvolt = <5000000>; 161 regulator-name = "usb_host_vbus_hub"; 162 startup-delay-us = <2000>; 163 status = "okay"; 164 }; 165 166 reg_usb_host_vbus: regulator-usb-host-vbus { 167 compatible = "regulator-fixed"; 168 enable-active-high; 169 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; 170 pinctrl-names = "default"; 171 pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; 172 regulator-max-microvolt = <5000000>; 173 regulator-min-microvolt = <5000000>; 174 regulator-name = "usb_host_vbus"; 175 vin-supply = <®_usb_host_vbus_hub>; 176 status = "disabled"; 177 }; 178 179 sound { 180 compatible = "fsl,imx-audio-sgtl5000"; 181 audio-codec = <&codec>; 182 audio-routing = 183 "LINE_IN", "Line In Jack", 184 "MIC_IN", "Mic Jack", 185 "Mic Jack", "Mic Bias", 186 "Headphone Jack", "HP_OUT"; 187 model = "imx6q-apalis-sgtl5000"; 188 mux-ext-port = <4>; 189 mux-int-port = <1>; 190 ssi-controller = <&ssi1>; 191 }; 192 193 sound_spdif: sound-spdif { 194 compatible = "fsl,imx-audio-spdif"; 195 spdif-controller = <&spdif>; 196 spdif-in; 197 spdif-out; 198 model = "imx-spdif"; 199 status = "disabled"; 200 }; 201}; 202 203&audmux { 204 pinctrl-names = "default"; 205 pinctrl-0 = <&pinctrl_audmux>; 206 status = "okay"; 207}; 208 209&can1 { 210 pinctrl-names = "default", "sleep"; 211 pinctrl-0 = <&pinctrl_flexcan1_default>; 212 pinctrl-1 = <&pinctrl_flexcan1_sleep>; 213 status = "disabled"; 214}; 215 216&can2 { 217 pinctrl-names = "default", "sleep"; 218 pinctrl-0 = <&pinctrl_flexcan2_default>; 219 pinctrl-1 = <&pinctrl_flexcan2_sleep>; 220 status = "disabled"; 221}; 222 223&clks { 224 fsl,pmic-stby-poweroff; 225}; 226 227/* Apalis SPI1 */ 228&ecspi1 { 229 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; 230 pinctrl-names = "default"; 231 pinctrl-0 = <&pinctrl_ecspi1>; 232 status = "disabled"; 233}; 234 235/* Apalis SPI2 */ 236&ecspi2 { 237 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 238 pinctrl-names = "default"; 239 pinctrl-0 = <&pinctrl_ecspi2>; 240 status = "disabled"; 241}; 242 243&gpio1 { 244 gpio-line-names = "MXM3_84", 245 "MXM3_4", 246 "MXM3_15/GPIO7", 247 "MXM3_96", 248 "MXM3_37", 249 "", 250 "MXM3_17/GPIO8", 251 "MXM3_14", 252 "MXM3_12", 253 "MXM3_2", 254 "MXM3_184", 255 "MXM3_180", 256 "MXM3_178", 257 "MXM3_176", 258 "MXM3_188", 259 "MXM3_186", 260 "MXM3_160", 261 "MXM3_162", 262 "MXM3_150", 263 "MXM3_144", 264 "MXM3_154", 265 "MXM3_146", 266 "", 267 "", 268 "MXM3_72"; 269}; 270 271&gpio2 { 272 gpio-line-names = "MXM3_148", 273 "MXM3_152", 274 "MXM3_156", 275 "MXM3_158", 276 "MXM3_1/GPIO1", 277 "MXM3_3/GPIO2", 278 "MXM3_5/GPIO3", 279 "MXM3_7/GPIO4", 280 "MXM3_95", 281 "MXM3_6", 282 "MXM3_8", 283 "MXM3_123", 284 "MXM3_126", 285 "MXM3_128", 286 "MXM3_130", 287 "MXM3_132", 288 "MXM3_253", 289 "MXM3_251", 290 "MXM3_283", 291 "MXM3_281", 292 "MXM3_279", 293 "MXM3_277", 294 "MXM3_243", 295 "MXM3_235", 296 "MXM3_231", 297 "MXM3_229", 298 "MXM3_233", 299 "MXM3_198", 300 "MXM3_275", 301 "MXM3_273", 302 "MXM3_207", 303 "MXM3_122"; 304}; 305 306&gpio3 { 307 gpio-line-names = "MXM3_271", 308 "MXM3_269", 309 "MXM3_301", 310 "MXM3_299", 311 "MXM3_297", 312 "MXM3_295", 313 "MXM3_293", 314 "MXM3_291", 315 "MXM3_289", 316 "MXM3_287", 317 "MXM3_249", 318 "MXM3_247", 319 "MXM3_245", 320 "MXM3_286", 321 "MXM3_239", 322 "MXM3_35", 323 "MXM3_205", 324 "MXM3_203", 325 "MXM3_201", 326 "MXM3_116", 327 "MXM3_114", 328 "MXM3_262", 329 "MXM3_274", 330 "MXM3_124", 331 "MXM3_110", 332 "MXM3_120", 333 "MXM3_263", 334 "MXM3_265", 335 "", 336 "MXM3_135", 337 "MXM3_261", 338 "MXM3_259"; 339}; 340 341&gpio4 { 342 gpio-line-names = "", 343 "", 344 "", 345 "", 346 "", 347 "MXM3_194", 348 "MXM3_136", 349 "MXM3_134", 350 "MXM3_140", 351 "MXM3_138", 352 "", 353 "MXM3_220", 354 "", 355 "", 356 "MXM3_18", 357 "MXM3_16", 358 "", 359 "", 360 "MXM3_214", 361 "MXM3_216", 362 "MXM3_164"; 363}; 364 365&gpio5 { 366 gpio-line-names = "MXM3_159", 367 "", 368 "", 369 "", 370 "MXM3_257", 371 "", 372 "", 373 "", 374 "", 375 "", 376 "MXM3_200", 377 "MXM3_196", 378 "MXM3_204", 379 "MXM3_202", 380 "", 381 "", 382 "", 383 "", 384 "MXM3_191", 385 "MXM3_197", 386 "MXM3_77", 387 "MXM3_195", 388 "MXM3_221", 389 "MXM3_225", 390 "MXM3_223", 391 "MXM3_227", 392 "MXM3_209", 393 "MXM3_211", 394 "MXM3_118", 395 "MXM3_112", 396 "MXM3_187", 397 "MXM3_185"; 398}; 399 400&gpio6 { 401 gpio-line-names = "MXM3_183", 402 "MXM3_181", 403 "MXM3_179", 404 "MXM3_177", 405 "MXM3_175", 406 "MXM3_173", 407 "MXM3_255", 408 "MXM3_83", 409 "MXM3_91", 410 "MXM3_13/GPIO6", 411 "MXM3_11/GPIO5", 412 "MXM3_79", 413 "", 414 "", 415 "MXM3_190", 416 "MXM3_193", 417 "MXM3_89"; 418}; 419 420&gpio7 { 421 gpio-line-names = "", 422 "", 423 "", 424 "", 425 "", 426 "", 427 "", 428 "", 429 "", 430 "MXM3_99", 431 "MXM3_85", 432 "MXM3_217", 433 "MXM3_215"; 434}; 435 436&gpr { 437 ipu1_csi0_mux { 438 #address-cells = <1>; 439 #size-cells = <0>; 440 status = "disabled"; 441 442 port@1 { 443 reg = <1>; 444 ipu1_csi0_mux_from_parallel_sensor: endpoint { 445 remote-endpoint = <&adv7280_to_ipu1_csi0_mux>; 446 }; 447 }; 448 }; 449}; 450 451&fec { 452 pinctrl-names = "default"; 453 pinctrl-0 = <&pinctrl_enet>; 454 phy-mode = "rgmii-id"; 455 phy-handle = <ðphy>; 456 phy-reset-duration = <10>; 457 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 458 status = "okay"; 459 460 mdio { 461 #address-cells = <1>; 462 #size-cells = <0>; 463 464 ethphy: ethernet-phy@7 { 465 interrupt-parent = <&gpio1>; 466 interrupts = <30 IRQ_TYPE_LEVEL_LOW>; 467 reg = <7>; 468 }; 469 }; 470}; 471 472&hdmi { 473 pinctrl-names = "default"; 474 pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>; 475 status = "disabled"; 476}; 477 478/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ 479&i2c1 { 480 clock-frequency = <100000>; 481 pinctrl-names = "default", "gpio"; 482 pinctrl-0 = <&pinctrl_i2c1>; 483 pinctrl-1 = <&pinctrl_i2c1_gpio>; 484 scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 485 sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 486 status = "disabled"; 487 488 atmel_mxt_ts: touchscreen@4a { 489 compatible = "atmel,maxtouch"; 490 /* These GPIOs are muxed with the iomuxc node */ 491 interrupt-parent = <&gpio6>; 492 interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */ 493 reg = <0x4a>; 494 reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */ 495 status = "disabled"; 496 }; 497}; 498 499/* 500 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and 501 * touch screen controller 502 */ 503&i2c2 { 504 clock-frequency = <100000>; 505 pinctrl-names = "default", "gpio"; 506 pinctrl-0 = <&pinctrl_i2c2>; 507 pinctrl-1 = <&pinctrl_i2c2_gpio>; 508 scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 509 sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 510 status = "okay"; 511 512 pmic: pmic@8 { 513 compatible = "fsl,pfuze100"; 514 fsl,pmic-stby-poweroff; 515 reg = <0x08>; 516 517 regulators { 518 sw1a_reg: sw1ab { 519 regulator-always-on; 520 regulator-boot-on; 521 regulator-max-microvolt = <1875000>; 522 regulator-min-microvolt = <300000>; 523 regulator-ramp-delay = <6250>; 524 }; 525 526 sw1c_reg: sw1c { 527 regulator-always-on; 528 regulator-boot-on; 529 regulator-max-microvolt = <1875000>; 530 regulator-min-microvolt = <300000>; 531 regulator-ramp-delay = <6250>; 532 }; 533 534 sw3a_reg: sw3a { 535 regulator-always-on; 536 regulator-boot-on; 537 regulator-max-microvolt = <1975000>; 538 regulator-min-microvolt = <400000>; 539 }; 540 541 swbst_reg: swbst { 542 regulator-always-on; 543 regulator-boot-on; 544 regulator-max-microvolt = <5150000>; 545 regulator-min-microvolt = <5000000>; 546 }; 547 548 snvs_reg: vsnvs { 549 regulator-always-on; 550 regulator-boot-on; 551 regulator-max-microvolt = <3000000>; 552 regulator-min-microvolt = <1000000>; 553 }; 554 555 vref_reg: vrefddr { 556 regulator-always-on; 557 regulator-boot-on; 558 }; 559 560 vgen1_reg: vgen1 { 561 regulator-always-on; 562 regulator-boot-on; 563 regulator-max-microvolt = <1550000>; 564 regulator-min-microvolt = <800000>; 565 }; 566 567 vgen2_reg: vgen2 { 568 regulator-always-on; 569 regulator-boot-on; 570 regulator-max-microvolt = <1550000>; 571 regulator-min-microvolt = <800000>; 572 }; 573 574 vgen3_reg: vgen3 { 575 regulator-always-on; 576 regulator-boot-on; 577 regulator-max-microvolt = <3300000>; 578 regulator-min-microvolt = <1800000>; 579 }; 580 581 vgen4_reg: vgen4 { 582 regulator-always-on; 583 regulator-boot-on; 584 regulator-max-microvolt = <1800000>; 585 regulator-min-microvolt = <1800000>; 586 }; 587 588 vgen5_reg: vgen5 { 589 regulator-always-on; 590 regulator-boot-on; 591 regulator-max-microvolt = <3300000>; 592 regulator-min-microvolt = <1800000>; 593 }; 594 595 vgen6_reg: vgen6 { 596 regulator-always-on; 597 regulator-boot-on; 598 regulator-max-microvolt = <3300000>; 599 regulator-min-microvolt = <1800000>; 600 }; 601 }; 602 }; 603 604 codec: sgtl5000@a { 605 compatible = "fsl,sgtl5000"; 606 #sound-dai-cells = <0>; 607 clocks = <&clks IMX6QDL_CLK_CKO>; 608 pinctrl-names = "default"; 609 pinctrl-0 = <&pinctrl_sgtl5000>; 610 reg = <0x0a>; 611 VDDA-supply = <®_module_3v3_audio>; 612 VDDIO-supply = <®_module_3v3>; 613 VDDD-supply = <&vgen4_reg>; 614 }; 615 616 /* STMPE811 touch screen controller */ 617 stmpe811@41 { 618 compatible = "st,stmpe811"; 619 blocks = <0x5>; 620 id = <0>; 621 interrupts = <10 IRQ_TYPE_LEVEL_LOW>; 622 interrupt-parent = <&gpio4>; 623 irq-trigger = <0x1>; 624 pinctrl-names = "default"; 625 pinctrl-0 = <&pinctrl_touch_int>; 626 reg = <0x41>; 627 /* 3.25 MHz ADC clock speed */ 628 st,adc-freq = <1>; 629 /* 12-bit ADC */ 630 st,mod-12b = <1>; 631 /* internal ADC reference */ 632 st,ref-sel = <0>; 633 /* ADC conversion time: 80 clocks */ 634 st,sample-time = <4>; 635 636 stmpe_ts: stmpe_touchscreen { 637 compatible = "st,stmpe-ts"; 638 /* 8 sample average control */ 639 st,ave-ctrl = <3>; 640 /* 7 length fractional part in z */ 641 st,fraction-z = <7>; 642 /* 643 * 50 mA typical 80 mA max touchscreen drivers 644 * current limit value 645 */ 646 st,i-drive = <1>; 647 /* 1 ms panel driver settling time */ 648 st,settling = <3>; 649 /* 5 ms touch detect interrupt delay */ 650 st,touch-det-delay = <5>; 651 status = "disabled"; 652 }; 653 654 stmpe_adc: stmpe_adc { 655 compatible = "st,stmpe-adc"; 656 #io-channel-cells = <1>; 657 /* forbid to use ADC channels 3-0 (touch) */ 658 st,norequest-mask = <0x0F>; 659 }; 660 }; 661}; 662 663/* 664 * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier 665 * board) 666 */ 667&i2c3 { 668 clock-frequency = <100000>; 669 pinctrl-names = "default", "gpio"; 670 pinctrl-0 = <&pinctrl_i2c3>; 671 pinctrl-1 = <&pinctrl_i2c3_gpio>; 672 scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 673 sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 674 status = "disabled"; 675 676 adv_7280: adv7280@21 { 677 compatible = "adi,adv7280"; 678 adv,force-bt656-4; 679 pinctrl-names = "default"; 680 pinctrl-0 = <&pinctrl_ipu1_csi0>; 681 reg = <0x21>; 682 status = "disabled"; 683 684 port { 685 adv7280_to_ipu1_csi0_mux: endpoint { 686 bus-width = <8>; 687 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; 688 }; 689 }; 690 }; 691 692 ov5640_csi_cam: ov5640_mipi@3c { 693 compatible = "ovti,ov5640"; 694 AVDD-supply = <®_ov5640_2v8_a_vdd>; 695 DOVDD-supply = <®_ov5640_1v8_d_o_vdd>; 696 DVDD-supply = <®_ov5640_1v8_d_o_vdd>; 697 clock-names = "xclk"; 698 clocks = <&clks IMX6QDL_CLK_CKO2>; 699 pinctrl-names = "default"; 700 pinctrl-0 = <&pinctrl_cam_mclk>; 701 /* These GPIOs are muxed with the iomuxc node */ 702 powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; 703 reg = <0x3c>; 704 reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; 705 status = "disabled"; 706 707 port { 708 ov5640_to_mipi_csi2: endpoint { 709 clock-lanes = <0>; 710 data-lanes = <1 2>; 711 remote-endpoint = <&mipi_csi_from_ov5640>; 712 }; 713 }; 714 }; 715}; 716 717&ipu1_di1_disp1 { 718 remote-endpoint = <&lcd_display_in>; 719}; 720 721&ldb { 722 lvds-channel@0 { 723 port@4 { 724 reg = <4>; 725 726 lvds0_out: endpoint { 727 remote-endpoint = <&lvds_panel_in>; 728 }; 729 }; 730 }; 731 732 lvds-channel@1 { 733 fsl,data-mapping = "spwg"; 734 fsl,data-width = <18>; 735 736 port@4 { 737 reg = <4>; 738 739 lvds1_out: endpoint { 740 }; 741 }; 742 }; 743}; 744 745&mipi_csi { 746 #address-cells = <1>; 747 #size-cells = <0>; 748 status = "disabled"; 749 750 port@0 { 751 reg = <0>; 752 753 mipi_csi_from_ov5640: endpoint { 754 clock-lanes = <0>; 755 data-lanes = <1 2>; 756 remote-endpoint = <&ov5640_to_mipi_csi2>; 757 }; 758 }; 759}; 760 761&pwm1 { 762 pinctrl-names = "default"; 763 pinctrl-0 = <&pinctrl_pwm1>; 764 status = "disabled"; 765}; 766 767&pwm2 { 768 pinctrl-names = "default"; 769 pinctrl-0 = <&pinctrl_pwm2>; 770 status = "disabled"; 771}; 772 773&pwm3 { 774 pinctrl-names = "default"; 775 pinctrl-0 = <&pinctrl_pwm3>; 776 status = "disabled"; 777}; 778 779&pwm4 { 780 pinctrl-names = "default"; 781 pinctrl-0 = <&pinctrl_pwm4>; 782 status = "disabled"; 783}; 784 785&spdif { 786 pinctrl-names = "default"; 787 pinctrl-0 = <&pinctrl_spdif>; 788 status = "disabled"; 789}; 790 791&ssi1 { 792 status = "okay"; 793}; 794 795&uart1 { 796 fsl,dte-mode; 797 pinctrl-names = "default"; 798 pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; 799 uart-has-rtscts; 800 status = "disabled"; 801}; 802 803&uart2 { 804 fsl,dte-mode; 805 pinctrl-names = "default"; 806 pinctrl-0 = <&pinctrl_uart2_dte>; 807 uart-has-rtscts; 808 status = "disabled"; 809}; 810 811&uart4 { 812 fsl,dte-mode; 813 pinctrl-names = "default"; 814 pinctrl-0 = <&pinctrl_uart4_dte>; 815 status = "disabled"; 816}; 817 818&uart5 { 819 fsl,dte-mode; 820 pinctrl-names = "default"; 821 pinctrl-0 = <&pinctrl_uart5_dte>; 822 status = "disabled"; 823}; 824 825&usbotg { 826 pinctrl-names = "default"; 827 pinctrl-0 = <&pinctrl_usbotg>; 828 status = "disabled"; 829}; 830 831/* MMC1 */ 832&usdhc1 { 833 bus-width = <8>; 834 cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; 835 disable-wp; 836 no-1-8-v; 837 pinctrl-names = "default"; 838 pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; 839 vqmmc-supply = <®_module_3v3>; 840 status = "disabled"; 841}; 842 843/* SD1 */ 844&usdhc2 { 845 bus-width = <4>; 846 disable-wp; 847 no-1-8-v; 848 pinctrl-names = "default"; 849 pinctrl-0 = <&pinctrl_usdhc2>; 850 vqmmc-supply = <®_module_3v3>; 851 status = "disabled"; 852}; 853 854/* eMMC */ 855&usdhc3 { 856 bus-width = <8>; 857 no-1-8-v; 858 non-removable; 859 pinctrl-names = "default"; 860 pinctrl-0 = <&pinctrl_usdhc3>; 861 vqmmc-supply = <®_module_3v3>; 862 status = "okay"; 863}; 864 865&weim { 866 status = "disabled"; 867}; 868 869&iomuxc { 870 /* Mux the Apalis GPIOs */ 871 pinctrl-names = "default"; 872 pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 873 &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 874 &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 875 &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 876 >; 877 878 pinctrl_apalis_gpio1: apalisgpio1grp { 879 fsl,pins = < 880 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 881 >; 882 }; 883 884 pinctrl_apalis_gpio2: apalisgpio2grp { 885 fsl,pins = < 886 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0 887 >; 888 }; 889 890 pinctrl_apalis_gpio3: apalisgpio3grp { 891 fsl,pins = < 892 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0 893 >; 894 }; 895 896 pinctrl_apalis_gpio4: apalisgpio4grp { 897 fsl,pins = < 898 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0 899 >; 900 }; 901 902 pinctrl_apalis_gpio5: apalisgpio5grp { 903 fsl,pins = < 904 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0 905 >; 906 }; 907 908 pinctrl_apalis_gpio6: apalisgpio6grp { 909 fsl,pins = < 910 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0 911 >; 912 }; 913 914 pinctrl_apalis_gpio7: apalisgpio7grp { 915 fsl,pins = < 916 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0 917 >; 918 }; 919 920 pinctrl_apalis_gpio8: apalisgpio8grp { 921 fsl,pins = < 922 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0 923 >; 924 }; 925 926 pinctrl_audmux: audmuxgrp { 927 fsl,pins = < 928 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 929 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 930 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 931 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 932 >; 933 }; 934 935 pinctrl_cam_mclk: cammclkgrp { 936 fsl,pins = < 937 /* CAM sys_mclk */ 938 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 939 >; 940 }; 941 942 pinctrl_ecspi1: ecspi1grp { 943 fsl,pins = < 944 MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1 945 MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1 946 MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1 947 /* SPI1 cs */ 948 MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1 949 >; 950 }; 951 952 pinctrl_ecspi2: ecspi2grp { 953 fsl,pins = < 954 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 955 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 956 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 957 /* SPI2 cs */ 958 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 959 >; 960 }; 961 962 pinctrl_enet: enetgrp { 963 fsl,pins = < 964 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 965 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 966 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 967 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 968 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 969 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 970 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 971 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 972 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 973 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 974 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 975 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 976 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 977 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 978 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 979 /* Ethernet PHY reset */ 980 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 981 /* Ethernet PHY interrupt */ 982 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1 983 >; 984 }; 985 986 pinctrl_flexcan1_default: flexcan1defgrp { 987 fsl,pins = < 988 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 989 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 990 >; 991 }; 992 993 pinctrl_flexcan1_sleep: flexcan1slpgrp { 994 fsl,pins = < 995 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0 996 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0 997 >; 998 }; 999 1000 pinctrl_flexcan2_default: flexcan2defgrp { 1001 fsl,pins = < 1002 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 1003 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 1004 >; 1005 }; 1006 pinctrl_flexcan2_sleep: flexcan2slpgrp { 1007 fsl,pins = < 1008 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0 1009 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0 1010 >; 1011 }; 1012 1013 pinctrl_gpio_bl_on: gpioblongrp { 1014 fsl,pins = < 1015 MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 1016 >; 1017 }; 1018 1019 pinctrl_gpio_keys: gpio1io04grp { 1020 fsl,pins = < 1021 /* Power button */ 1022 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 1023 >; 1024 }; 1025 1026 pinctrl_hdmi_cec: hdmicecgrp { 1027 fsl,pins = < 1028 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 1029 >; 1030 }; 1031 1032 pinctrl_hdmi_ddc: hdmiddcgrp { 1033 fsl,pins = < 1034 MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 1035 MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 1036 >; 1037 }; 1038 1039 pinctrl_i2c1: i2c1grp { 1040 fsl,pins = < 1041 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 1042 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 1043 >; 1044 }; 1045 1046 pinctrl_i2c1_gpio: i2c1gpiogrp { 1047 fsl,pins = < 1048 MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1 1049 MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1 1050 >; 1051 }; 1052 1053 pinctrl_i2c2: i2c2grp { 1054 fsl,pins = < 1055 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 1056 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 1057 >; 1058 }; 1059 1060 pinctrl_i2c2_gpio: i2c2gpiogrp { 1061 fsl,pins = < 1062 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 1063 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 1064 >; 1065 }; 1066 1067 pinctrl_i2c3: i2c3grp { 1068 fsl,pins = < 1069 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 1070 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 1071 >; 1072 }; 1073 1074 pinctrl_i2c3_gpio: i2c3gpiogrp { 1075 fsl,pins = < 1076 MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1 1077 MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1 1078 >; 1079 }; 1080 1081 pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */ 1082 fsl,pins = < 1083 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1 1084 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1 1085 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1 1086 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1 1087 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1 1088 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1 1089 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1 1090 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1 1091 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1 1092 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1 1093 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1 1094 >; 1095 }; 1096 1097 pinctrl_ipu1_lcdif: ipu1lcdifgrp { 1098 fsl,pins = < 1099 MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61 1100 /* DE */ 1101 MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61 1102 /* HSync */ 1103 MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61 1104 /* VSync */ 1105 MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61 1106 MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61 1107 MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61 1108 MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61 1109 MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61 1110 MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61 1111 MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61 1112 MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61 1113 MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61 1114 MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61 1115 MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61 1116 MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61 1117 MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61 1118 MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61 1119 MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61 1120 MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61 1121 MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61 1122 MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61 1123 MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61 1124 MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61 1125 MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61 1126 MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61 1127 MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61 1128 MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61 1129 MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61 1130 >; 1131 }; 1132 1133 pinctrl_ipu2_vdac: ipu2vdacgrp { 1134 fsl,pins = < 1135 MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1 1136 MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1 1137 MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1 1138 MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1 1139 MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9 1140 MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9 1141 MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9 1142 MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9 1143 MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9 1144 MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9 1145 MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9 1146 MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9 1147 MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9 1148 MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9 1149 MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9 1150 MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9 1151 MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9 1152 MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9 1153 MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9 1154 MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9 1155 >; 1156 }; 1157 1158 pinctrl_mmc_cd: mmccdgrp { 1159 fsl,pins = < 1160 /* MMC1 CD */ 1161 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0 1162 >; 1163 }; 1164 1165 pinctrl_pwm1: pwm1grp { 1166 fsl,pins = < 1167 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 1168 >; 1169 }; 1170 1171 pinctrl_pwm2: pwm2grp { 1172 fsl,pins = < 1173 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 1174 >; 1175 }; 1176 1177 pinctrl_pwm3: pwm3grp { 1178 fsl,pins = < 1179 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 1180 >; 1181 }; 1182 1183 pinctrl_pwm4: pwm4grp { 1184 fsl,pins = < 1185 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 1186 >; 1187 }; 1188 1189 pinctrl_regulator_usbh_pwr: regusbhpwrgrp { 1190 fsl,pins = < 1191 /* USBH_EN */ 1192 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058 1193 >; 1194 }; 1195 1196 pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp { 1197 fsl,pins = < 1198 /* USBH_HUB_EN */ 1199 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058 1200 >; 1201 }; 1202 1203 pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp { 1204 fsl,pins = < 1205 /* USBO1 power en */ 1206 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058 1207 >; 1208 }; 1209 1210 pinctrl_reset_moci: resetmocigrp { 1211 fsl,pins = < 1212 /* RESET_MOCI control */ 1213 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058 1214 >; 1215 }; 1216 1217 pinctrl_sd_cd: sdcdgrp { 1218 fsl,pins = < 1219 /* SD1 CD */ 1220 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 1221 >; 1222 }; 1223 1224 pinctrl_sgtl5000: sgtl5000grp { 1225 fsl,pins = < 1226 MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 1227 >; 1228 }; 1229 1230 pinctrl_spdif: spdifgrp { 1231 fsl,pins = < 1232 MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 1233 MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 1234 >; 1235 }; 1236 1237 pinctrl_touch_int: touchintgrp { 1238 fsl,pins = < 1239 /* STMPE811 interrupt */ 1240 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 1241 >; 1242 }; 1243 1244 /* Additional DTR, DSR, DCD */ 1245 pinctrl_uart1_ctrl: uart1ctrlgrp { 1246 fsl,pins = < 1247 MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 1248 MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 1249 MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 1250 >; 1251 }; 1252 1253 pinctrl_uart1_dce: uart1dcegrp { 1254 fsl,pins = < 1255 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 1256 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 1257 >; 1258 }; 1259 1260 /* DTE mode */ 1261 pinctrl_uart1_dte: uart1dtegrp { 1262 fsl,pins = < 1263 MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 1264 MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 1265 MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 1266 MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 1267 >; 1268 }; 1269 1270 pinctrl_uart2_dce: uart2dcegrp { 1271 fsl,pins = < 1272 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 1273 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 1274 >; 1275 }; 1276 1277 /* DTE mode */ 1278 pinctrl_uart2_dte: uart2dtegrp { 1279 fsl,pins = < 1280 MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 1281 MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 1282 MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 1283 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 1284 >; 1285 }; 1286 1287 pinctrl_uart4_dce: uart4dcegrp { 1288 fsl,pins = < 1289 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 1290 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 1291 >; 1292 }; 1293 1294 /* DTE mode */ 1295 pinctrl_uart4_dte: uart4dtegrp { 1296 fsl,pins = < 1297 MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1 1298 MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1 1299 >; 1300 }; 1301 1302 pinctrl_uart5_dce: uart5dcegrp { 1303 fsl,pins = < 1304 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 1305 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 1306 >; 1307 }; 1308 1309 /* DTE mode */ 1310 pinctrl_uart5_dte: uart5dtegrp { 1311 fsl,pins = < 1312 MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 1313 MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 1314 >; 1315 }; 1316 1317 pinctrl_usbotg: usbotggrp { 1318 fsl,pins = < 1319 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 1320 >; 1321 }; 1322 1323 pinctrl_usdhc1_4bit: usdhc1-4bitgrp { 1324 fsl,pins = < 1325 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 1326 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 1327 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 1328 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 1329 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 1330 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 1331 >; 1332 }; 1333 1334 pinctrl_usdhc1_8bit: usdhc1-8bitgrp { 1335 fsl,pins = < 1336 MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071 1337 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071 1338 MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071 1339 MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071 1340 >; 1341 }; 1342 1343 pinctrl_usdhc2: usdhc2grp { 1344 fsl,pins = < 1345 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 1346 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 1347 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 1348 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 1349 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 1350 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 1351 >; 1352 }; 1353 1354 pinctrl_usdhc3: usdhc3grp { 1355 fsl,pins = < 1356 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 1357 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 1358 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 1359 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 1360 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 1361 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 1362 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 1363 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 1364 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 1365 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 1366 /* eMMC reset */ 1367 MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 1368 >; 1369 }; 1370}; 1371