1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (C) 2013 Marek Vasut <marex@denx.de> 4 */ 5 6/dts-v1/; 7#include "imx53-m53.dtsi" 8 9/ { 10 model = "Aries/DENX M53EVK"; 11 compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; 12 13 display1: disp1 { 14 compatible = "fsl,imx-parallel-display"; 15 interface-pix-fmt = "bgr666"; 16 pinctrl-names = "default"; 17 pinctrl-0 = <&pinctrl_ipu_disp1>; 18 19 display-timings { 20 800x480p60 { 21 native-mode; 22 clock-frequency = <31500000>; 23 hactive = <800>; 24 vactive = <480>; 25 hfront-porch = <40>; 26 hback-porch = <88>; 27 hsync-len = <128>; 28 vback-porch = <33>; 29 vfront-porch = <9>; 30 vsync-len = <3>; 31 vsync-active = <1>; 32 }; 33 }; 34 35 port { 36 display1_in: endpoint { 37 remote-endpoint = <&ipu_di1_disp1>; 38 }; 39 }; 40 }; 41 42 backlight { 43 compatible = "pwm-backlight"; 44 pwms = <&pwm1 0 3000>; 45 brightness-levels = <0 4 8 16 32 64 128 255>; 46 default-brightness-level = <6>; 47 power-supply = <®_backlight>; 48 }; 49 50 leds { 51 compatible = "gpio-leds"; 52 pinctrl-names = "default"; 53 pinctrl-0 = <&led_pin_gpio>; 54 55 led-user1 { 56 label = "user1"; 57 gpios = <&gpio2 8 0>; 58 linux,default-trigger = "heartbeat"; 59 }; 60 61 led-user2 { 62 label = "user2"; 63 gpios = <&gpio2 9 0>; 64 linux,default-trigger = "heartbeat"; 65 }; 66 }; 67 68 reg_usbh1_vbus: regulator-usbh1-vbus { 69 compatible = "regulator-fixed"; 70 regulator-name = "vbus"; 71 regulator-min-microvolt = <5000000>; 72 regulator-max-microvolt = <5000000>; 73 gpio = <&gpio1 2 0>; 74 }; 75 76 reg_usb_otg_vbus: regulator-usb-otg-vbus { 77 compatible = "regulator-fixed"; 78 regulator-name = "usb_otg_vbus"; 79 regulator-min-microvolt = <5000000>; 80 regulator-max-microvolt = <5000000>; 81 gpio = <&gpio1 4 0>; 82 }; 83 84 sound { 85 compatible = "fsl,imx53-m53evk-sgtl5000", 86 "fsl,imx-audio-sgtl5000"; 87 model = "imx53-m53evk-sgtl5000"; 88 ssi-controller = <&ssi2>; 89 audio-codec = <&sgtl5000>; 90 audio-routing = 91 "MIC_IN", "Mic Jack", 92 "Mic Jack", "Mic Bias", 93 "LINE_IN", "Line In Jack", 94 "Headphone Jack", "HP_OUT", 95 "Ext Spk", "LINE_OUT"; 96 mux-int-port = <2>; 97 mux-ext-port = <4>; 98 }; 99}; 100 101&audmux { 102 pinctrl-names = "default"; 103 pinctrl-0 = <&pinctrl_audmux>; 104 status = "okay"; 105}; 106 107&can1 { 108 pinctrl-names = "default"; 109 pinctrl-0 = <&pinctrl_can1>; 110 status = "okay"; 111}; 112 113&can2 { 114 pinctrl-names = "default"; 115 pinctrl-0 = <&pinctrl_can2>; 116 status = "okay"; 117}; 118 119&esdhc1 { 120 pinctrl-names = "default"; 121 pinctrl-0 = <&pinctrl_esdhc1>; 122 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; 123 wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; 124 status = "okay"; 125}; 126 127&fec { 128 pinctrl-names = "default"; 129 pinctrl-0 = <&pinctrl_fec>; 130 phy-mode = "rmii"; 131 status = "okay"; 132}; 133 134&i2c1 { 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pinctrl_i2c1>; 137 status = "okay"; 138 139 sgtl5000: codec@a { 140 compatible = "fsl,sgtl5000"; 141 reg = <0x0a>; 142 #sound-dai-cells = <0>; 143 VDDA-supply = <®_3p2v>; 144 VDDIO-supply = <®_3p2v>; 145 clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; 146 }; 147}; 148 149&i2c3 { 150 pinctrl-names = "default"; 151 pinctrl-0 = <&pinctrl_i2c3>; 152 status = "okay"; 153}; 154 155&iomuxc { 156 pinctrl-names = "default"; 157 pinctrl-0 = <&pinctrl_hog>; 158 159 imx53-m53evk { 160 pinctrl_usb: usbgrp { 161 fsl,pins = < 162 MX53_PAD_GPIO_2__GPIO1_2 0x80000000 163 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 164 >; 165 }; 166 167 pinctrl_usbotg: usbotggrp { 168 fsl,pins = < 169 MX53_PAD_GPIO_4__GPIO1_4 0x000b0 170 >; 171 }; 172 173 led_pin_gpio: led_gpio { 174 fsl,pins = < 175 MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000 176 MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000 177 >; 178 }; 179 180 pinctrl_audmux: audmuxgrp { 181 fsl,pins = < 182 MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 183 MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 184 MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 185 MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 186 >; 187 }; 188 189 pinctrl_can1: can1grp { 190 fsl,pins = < 191 MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 192 MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 193 >; 194 }; 195 196 pinctrl_can2: can2grp { 197 fsl,pins = < 198 MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 199 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 200 >; 201 }; 202 203 pinctrl_esdhc1: esdhc1grp { 204 fsl,pins = < 205 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 206 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 207 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 208 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 209 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 210 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 211 >; 212 }; 213 214 pinctrl_fec: fecgrp { 215 fsl,pins = < 216 MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 217 MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 218 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 219 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 220 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 221 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 222 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 223 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 224 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 225 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 226 >; 227 }; 228 229 pinctrl_i2c1: i2c1grp { 230 fsl,pins = < 231 MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 232 MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 233 >; 234 }; 235 236 pinctrl_i2c3: i2c3grp { 237 fsl,pins = < 238 MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 239 MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 240 >; 241 }; 242 243 pinctrl_ipu_disp1: ipudisp1grp { 244 fsl,pins = < 245 MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 246 MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 247 MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 248 MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 249 MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 250 MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 251 MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 252 MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 253 MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 254 MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 255 MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 256 MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 257 MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 258 MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 259 MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 260 MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 261 MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 262 MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 263 MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 264 MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 265 MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 266 MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 267 MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 268 MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 269 MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 270 MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 271 MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 272 MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 273 MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 274 MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 275 MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 276 MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 277 >; 278 }; 279 280 pinctrl_pwm1: pwm1grp { 281 fsl,pins = < 282 MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 283 >; 284 }; 285 286 pinctrl_uart1: uart1grp { 287 fsl,pins = < 288 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 289 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 290 >; 291 }; 292 293 pinctrl_uart2: uart2grp { 294 fsl,pins = < 295 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 296 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 297 >; 298 }; 299 300 pinctrl_uart3: uart3grp { 301 fsl,pins = < 302 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 303 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 304 MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 305 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 306 >; 307 }; 308 }; 309}; 310 311&ipu_di1_disp1 { 312 remote-endpoint = <&display1_in>; 313}; 314 315&pwm1 { 316 #pwm-cells = <2>; 317 pinctrl-names = "default"; 318 pinctrl-0 = <&pinctrl_pwm1>; 319 status = "okay"; 320}; 321 322&sata { 323 status = "okay"; 324}; 325 326&ssi2 { 327 status = "okay"; 328}; 329 330&uart1 { 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pinctrl_uart1>; 333 status = "okay"; 334}; 335 336&uart2 { 337 pinctrl-names = "default"; 338 pinctrl-0 = <&pinctrl_uart2>; 339 status = "okay"; 340}; 341 342&uart3 { 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_uart3>; 345 status = "okay"; 346}; 347 348&usbh1 { 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_usb>; 351 vbus-supply = <®_usbh1_vbus>; 352 phy_type = "utmi"; 353 status = "okay"; 354}; 355 356&usbotg { 357 pinctrl-names = "default"; 358 pinctrl-0 = <&pinctrl_usbotg>; 359 dr_mode = "otg"; 360 vbus-supply = <®_usb_otg_vbus>; 361 disable-over-current; 362 status = "okay"; 363}; 364